Hello I have a fit/PC which has a Intel GMA500 Poulsbo video chip in it. It doesn't function correctly as can be seen in this bug report http://lists.opensuse.org/opensuse-bugs/2013-03/msg04778.html The device is connected to a DVI connected screen and everything is scrunched up into the upper left hand corner of the screen. I think it is running through the VESA frame buffer? The device is running on an updated openSuSE 12.2. I managed to get the system to not run through the frame buffer, giving me full console at least, not no X capability. Since I've been using it as a server, that has been fine. But know after the latest upgrade, the boot screen has changed and the viewport is squashed into the corner again. The chips worked with openSuSE 11.3, so I don't even know how it is now working, but please, it is possible, let me know if there is a kernel driver i can install to make it work with X11 properly, or get rid of the frame buffer permanently this time. Ruben PS - Reference: http://lizards.opensuse.org/2011/04/12/intel-gma500-poulsbo-drivers-and-open... http://lists.opensuse.org/opensuse-bugs/2013-03/msg04778.html hwinfo output: hid 81709 1 usbhid, Live 0xf81c5000 uhci_hcd 35656 0 - Live 0xf815f000 poulsbo 12553 0 - Live 0xf8115000 ehci_hcd 59456 0 - Live 0xf832b000 usbcore 194042 4 usbhid,uhci_hcd,ehci_hcd, Live 0xf8194000 usb_common 12526 1 usbcore, Live 0xf8110000 gma500_gfx 138256 1 - Live 0xf80ed000 drm_kms_helper 45454 1 gma500_gfx, Live 0xf80e0000 drm 232083 2 gma500_gfx,drm_kms_helper, Live 0xf811a000 i2c_algo_bit 13198 1 gma500_gfx, Live 0xf809a000 i2c_core 33926 5 i2c_isch,gma500_gfx,drm_kms_helper,drm,i2c_algo_bit, Live 0xf80c8000 thermal 18231 0 - Live 0xf80be000 video 18889 1 poulsbo, Live 0xf80a3000 processor 43535 1 acpi_cpufreq, Live 0xf80b2000 thermal_sys 19936 3 thermal,video,processor, Live 0xf8027000 hwmon 12912 2 coretemp,thermal_sys, Live 0xf8091000 ... 12: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.319] Unique ID: _Znp.DlGhUSFiV2D SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel System Controller Hub (SCH Poulsbo) Graphics Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x8108 "System Controller Hub (SCH Poulsbo) Graphics Controller" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x8119 Revision: 0x07 Driver: "gma500" Driver Modules: "drm" Memory Range: 0xd0080000-0xd00fffff (rw,non-prefetchable) I/O Ports: 0x1800-0x1807 (rw) Memory Range: 0xc0000000-0xcfffffff (rw,non-prefetchable) Memory Range: 0xd0040000-0xd007ffff (rw,non-prefetchable) IRQ: 16 (no events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00008086d00008108sv00008086sd00008119bc03sc00i00" Driver Info #0: Driver Status: gma500_gfx is active Driver Activation Cmd: "modprobe gma500_gfx" Driver Info #1: Driver Status: poulsbo is active Driver Activation Cmd: "modprobe poulsbo" Config Status: cfg=no, avail=yes, need=no, active=unknown -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org