I have a Lenovo X201 with tpm. I have the system installed as follows: One hdd with a /dev/sda1 partition (unencrypted) and an LVM (with the /dev/ home, /dev/system, /dev/root, /dev/swap) as proposed by the partitioner at the time of fresh install of Leap 15. I tried however an update first with a 42.3 system and a /boot partition and the error I am describing here was the same in Leap 15. When starting up the system reaches correctly trusted grub2. You are asked to input the password. After having done the input, the system works for some time and then states: slot 0 opened (so this part works) Error: no symbol table and then you are brought - without any interaction required - to grub (were you have a second issue, of being asked always the password (no matter what). Since the fix for this will be in the future (bug filed for the previous version), this is not the issue. The password issue was present also in 42.3 (were no complain was there). So it is unrelated. You input the user (root) and the password of choice. Then the system starts up and stops right after loading the kernel with: error - no symbol table found - press any key to proceed. Then you press whatever key, e.g enter and all works fine up to full boot up. No other disturbances seem to be there. This happens only after the upgrade to Leap 15 / new install of Leap 15. Therefore it seems a grub2 issue? Can anybody give me some insight of the matter? Should I raise a bug? Thanks in advance. _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org