Alle 22:15, sabato 21 febbraio 2004, Ken Schneider ha scritto:
You will also need to run SuSEconfig and I am not sure of insserv -d. Reboot in verbose mode and watch the messages as they cross the screen. If they go by to fast have a look at /var/log/boot.msg and/or run the dmesg|less to see boot messages (right after a boot).
Ken, I've run SuSEconfig and insserv but doesn't help.
Here is my dmesg:
ste@luna:~> dmesg
Linux version 2.4.21-192-default (root@i386.suse.de) (gcc version 3.3.1 (SuSE
Li
nux)) #1 Wed Feb 18 19:26:28 UTC 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000b7f0000 (usable)
BIOS-e820: 000000000b7f0000 - 000000000b7ffc00 (ACPI data)
BIOS-e820: 000000000b7ffc00 - 000000000b800000 (ACPI NVS)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
829MB vmalloc/ioremap area available.
0MB HIGHMEM available.
183MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 47088
zone(0): 4096 pages.
zone(1): 42992 pages.
zone(2): 0 pages.
Compaq 12XL125 machine detected. Enabling interrupts during APM calls.
ACPI: RSDP (v000 PTLTD ) @ 0x000f7850
ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ 0x0b7fd0f7
ACPI: FADT (v001 COMPAQ ERA 01540.00000) @ 0x0b7ffb8c
ACPI: DSDT (v001 Compaq ERA 01540.00000) @ 0x00000000
ACPI: Skipping APIC setup
Building zonelist for node : 0
Kernel command line: root=/dev/hda2 vga=0x314 desktop acpi=force splash=silent
bootsplash: silent mode.
Initializing CPU#0
Detected 473.288 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 925.69 BogoMIPS
Memory: 182536k/188352k available (1580k kernel code, 5428k reserved, 605k
data,
160k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After generic, caps: 008021bf 808029bf 00000000 00000002
CPU: Common caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: AMD K6
ACPI: Subsystem revision 20030619
PCI: PCI BIOS revision 2.10 entry at 0xfd83e, last bus=1
PCI: Using configuration type 1
Looking for DSDT in initrd ... not found!
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 9)
ACPI: PCI Interrupt Link [LNKC] (IRQs 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 7 9 10 *11 12)
ACPI: Embedded Controller [EC] (gpe 6)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
00:00:01[A] -> IRQ 9 Mode 1 Trigger 1
PIC: IRQ (9) already programmed
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PIC: IRQ (9) already programmed
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
00:00:07[C] -> IRQ 11 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (9) already programmed
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off
'
PCI: Disabling Via external APIC routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: overridden by ACPI.
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
kinoded started
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 11772
aio_setup: sizeof(struct page) = 48
vesafb: framebuffer at 0xf5000000, mapped to 0xcc016000, size 8192k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: protected mode interface info at c000:6352
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
mtrr: no more MTRRs available
bootsplash 3.0.9-2003/09/08: looking for picture.... silenjpeg size 16664
bytes,
found (800x600, 8118 bytes, v3).
bootsplash: silent jpeg found.
bootsplash: silent jpeg found.
Console: switching to colour frame buffer device 92x29
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_I
RQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 19) IDE UDMA66 controller on pci00:07.1
ide0: BM-DMA at 0x1820-0x1827, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1828-0x182f, BIOS settings: hdc:DMA, hdd:pio
hda: HITACHI_DK23AA-51, ATA DISK drive
blk: queue c03bc8e0, I/O limit 4095Mb (mask 0xffffffff)
hdc: TOSHIBA CD-ROM XM-7002Bc, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 10009440 sectors (5125 MB) w/512KiB Cache, CHS=10592/15/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
hda: [PTBL] [662/240/63] hda1 hda2 hda3
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cryptoapi: loaded
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 268k freed
VFS: Mounted root (ext2 filesystem).
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (device ide0(3,2)) ...
for (ide0(3,2))
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 160k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
reiserfs: enabling write barrier flush mode
lvm-mp: allocating 42 lowmem entries at c1e93000
LVM version 1.0.5+(mp-v6c)(22/07/2002) module loaded
reiserfs: enabling write barrier flush mode
Adding Swap: 317512k swap-space (priority 42)
reiserfs: enabling write barrier flush mode
reiserfs: enabling write barrier flush mode
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Yenta IRQ list 0008, PCI irq9
Socket status: 30000020
8139too Fast Ethernet driver 0.9.26
IPsec Security Association Database (SADB): initialized.
IPsec Security Policy Database (SPD): initialized.
IPsec PF_KEY V2: initialized
IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (1471 buckets, 11768 max) - 304 bytes per conntrack
8139too Fast Ethernet driver 0.9.26
raw1394: /dev/raw1394 device initialized
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19:50:37 Feb 18 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:07.2-1, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
hub.c: new USB device 00:07.2-1.3, assigned address 3
usb.c: USB device 3 (vend/prod 0x46d/0xc501) is not claimed by any active
driver
.
hub.c: new USB device 00:07.2-1.4, assigned address 4
usb.c: USB device 4 (vend/prod 0x50f/0x180) is not claimed by any active
driver.
mice: PS/2 mouse device common for all mice
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb1:3.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik