Le 13 Octobre 2004 06:26, Catimimi a écrit :
Hello,
I come in this discussion, in order to tell you that I got a similar problem with module sym53c8xx.ko when they switch from version 'i" (kernel 2.4 and early 2.6) to version "j". The error messages were not parity errors, but domain validation errors and the boot sequence was aborting.
I used 2 different solutions before finding the reason :
- 1° - I inserted the "i" sources and headers for scsi in the 2.6 kernel and it worked. - 2° - I patched the "j" release in order to stop domain validation end it worked.
But I happened to change one of my old drives : a maxtor 72Gb hdd and release "j" works. Making some googling, I found that some people had problems with old drives.
I suggest you to disconnect ( one by one) your drives and to check if the boot process succeeds.
To be complete, I installed this old drive in my summer house with release "j", but with an adaptec scsi 29160 adaptor, and it works !
i don't have problem to boot, it's when i use linux... i got some reset... after the reset, i can continu to use my hd, cdrom... scsi i tried a 2940 adapter and i don't have the problem they seem to be the driver can you send me the patched module?
Michel.
--
Michel et Catherine Garnier
4 résidence les chênes Le parc de Rocquencourt
78150 Rocquencourt
Tel/Fax : + 33 (0)1 39 43 80 13 Email : Michel.R.Garnier@wanadoo.fr Catherine.F.Garnier@wanadoo.fr
ICQ : 155138655
-- La boîte à prog http://www.laboiteaprog.com