24 May
2004
24 May
'04
19:54
On Mon, 24 May 2004 22:31, fareed@iplex.co.zw wrote:
It says device does not exist on st0, rStp0, checked all. The SCSI bios picks up the tape drive, but nothing...
Cheers
What program are you using that says the device does not exist? I have used a large number of SCSI tape drives since SuSE 6.0 and they all appear as /dev/st0 (First Tape drive) on my systems. Try the following command with a tape in the drive mt -f /dev/st0 status If you don't get any output or "Device not found" please run the following command as root and see if your tape drive is identified. rescan-scsi-bus.sh -- Regards, Graham Smith ---------------------------------------------------------