Dear All,
Could someone please tell and help me to solve this problem? Actually I have got two hard-disks of where suse is installed on master and windows on slave.
It was previously the opposite, I mean the windows on master and suse on slave, but after I reconferred the setting in shifting the jumper in order to have suse on master and windows on slave. After this operation I had several problems concerning the mdr and grub configuration, and than I decided to reinstall everything and now I still get the problem with starting. So when I turn on my pc the word GRUB displays and stops. Here is the last modification of the menu.lst that I have tried too
------------------------------------------
# Modified by YaST2. Last modification on Wed Aug 3 02:35:48 2005
color white/blue black/light-gray
default 0
timeout 10
gfxmenu (hd0,2)/boot/message
###Don't change this comment - YaST2 identifier: Original name:
Thanks a lot for your reply. I followed the way as you described below. But I'm getting now the error as follow: -------- GRUB Loading stage1.5. GRUB loading, please wait ... Error 17 ---------------------- Thanks a lot again for your help -----Original Message----- From: Brad Dameron [mailto:brad@seatab.com] Sent: Friday, August 05, 2005 02:03 To: suse-linux-e@suse.com Subject: Re: [SLE] Still with Grub Problems On Fri, 2005-08-05 at 01:43 +0200, Yahiaoui, A. wrote: linux###
title SUSE LINUX 9.2
kernel (hd0,2)/boot/vmlinuz root=/dev/hda3 vga=0x317 selinux=0 splash=silent resume=/dev/hda2 desktop elevator=as showopts
initrd (hd0,2)/boot/initrd
title windows 1
map (hd0) (hd1)
map (hd1) (hd0)
root (hd0,0)
chainloader +1
title windows 28
root (hd1,0)
chainloader +1
###Don't change this comment - YaST2 identifier: Original name: floppy###
title Floppy
root (fd0)
chainloader +1
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- SUSE LINUX 9.2
kernel (hd0,2)/boot/vmlinuz root=/dev/hda3 showopts ide=nodma apm=off acpi=off vga=normal noresume selinux=0 barrier=off nosmp
noapic
maxcpus=0 3
initrd (hd0,2)/boot/initrd
###Don't change this comment - YaST2 identifier: Original name: memtest86###
title Memory Test
kernel (hd0,2)/boot/memtest.bin
Either boot off the rescue disk to mount your partition or however you got onto it. Then run grub. Do a "root (hd0,2)". Then do a "setup (hd0)". Then "quit" and reboot. Brad Dameron Systems Administrator SeaTab Software www.seatab.com -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com