Paul Neuwirth wrote:
Hallo, back to this topic, as support for 12.3 ended, I am now testing wicked on a similair testing machine. I struggle at the first step: I cannot setup a network interface with static ip. Yast does not mention an error. But the interface does not get up with static ip. generated config by yast:
/etc/sysconfig/network/ifcfg-enp5s0 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='172.19.0.1/24' MTU='' NAME='NetXtreme BCM5721 Gigabit Ethernet PCI Express' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto'
After testing/preparing it for a few weeks, I only just yesterday switched our main router/firewall to 13.2. I have 5 static interfaces, I see no problems - sofar :-) Here's one example config, looks a lot like yours: BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='192.168.2.7/21' MTU='' NAME='NetXtreme BCM5703X Gigabit Ethernet' NETMASK='' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' IPADDR_='2001:8e0:2010:1ff::1:1/64'
wicked: device enp5s0: operation timed out enp5s0 setup-in-progress
??
Is the cable plugged in? -- Per Jessen, Zürich (11.2°C) http://www.hostsuisse.com/ - virtual servers, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org