On Tue, 2006-04-18 at 01:44 +0200, Carlos E. R. wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
The Monday 2006-04-17 at 18:48 -0400, Mike McMullin wrote:
I switched your command line for mine and got the following in my log files using kdeprintfax: ... Apr 17 18:41:49.47: [21367]: DIAL ******* Apr 17 18:41:49.47: [21367]: <-- [12:ATDT*******\r] Apr 17 18:41:51.58: [21367]: --> [12:NO DIAL TONE] ... The not dial tone makes sense here. I unplugged the modem from the wall just prior to trying this. (Expected in-coming phone call.)
Good! We are getting nearer, then :-)
I finally got back to this today. Here's the resulting log file (edited for space): May 21 09:59:38.14: [10019]: SESSION BEGIN 000000044 5199740726 May 21 09:59:38.14: [10019]: HylaFAX (tm) Version 4.2.1 May 21 09:59:38.15: [10019]: SEND FAX: JOB 13 DEST ***-***-**** COMMID 000000044 DEVICE '/dev/ttyS4' May 21 09:59:38.15: [10019]: STATE CHANGE: RUNNING -> SENDING May 21 09:59:38.15: [10019]: MODEM input buffering enabled May 21 09:59:38.16: [10019]: <-- [9:AT+FLO=2\r] May 21 09:59:38.27: [10019]: --> [2:OK] May 21 09:59:38.27: [10019]: <-- [9:AT+FPP=0\r] May 21 09:59:38.38: [10019]: --> [2:OK] May 21 09:59:38.38: [10019]: <-- [9:AT+FBO=0\r] May 21 09:59:38.50: [10019]: --> [2:OK] May 21 09:59:38.50: [10019]: <-- [10:AT+FCT=30\r] May 21 09:59:38.61: [10019]: --> [2:OK] May 21 09:59:38.61: [10019]: <-- [15:AT+FNR=1,1,1,0\r] May 21 09:59:38.72: [10019]: --> [2:OK] May 21 09:59:38.72: [10019]: <-- [9:AT+FIE=0\r] May 21 09:59:38.84: [10019]: --> [2:OK] May 21 09:59:38.84: [10019]: <-- [9:AT+FBU=0\r] May 21 09:59:38.95: [10019]: --> [2:OK] May 21 09:59:38.95: [10019]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r] May 21 09:59:39.07: [10019]: --> [2:OK] May 21 09:59:39.07: [10019]: DIAL ***-***-*** May 21 09:59:39.07: [10019]: <-- [17:ATDT***-***-****\r] May 21 10:00:06.42: [10019]: --> [4:+FCO] May 21 10:00:08.94: [10019]: --> [27:+FCI:" *** *** ****"] May 21 10:00:08.94: [10019]: REMOTE CSI "*** *** ****" May 21 10:00:08.94: [10019]: --> [20:+FIS:1,5,0,2,1,0,0,3] May 21 10:00:08.94: [10019]: --> [2:OK] May 21 10:00:08.94: [10019]: REMOTE best rate 14400 bit/s May 21 10:00:08.94: [10019]: REMOTE max A4 page width (215 mm) May 21 10:00:08.94: [10019]: REMOTE max unlimited page length May 21 10:00:08.94: [10019]: REMOTE best vres 7.7 line/mm May 21 10:00:08.94: [10019]: REMOTE best format 2-D MR May 21 10:00:08.94: [10019]: REMOTE best 10 ms/scanline May 21 10:00:08.94: [10019]: USE 14400 bit/s May 21 10:00:08.95: [10019]: USE 10 ms/scanline May 21 10:00:08.95: [10019]: SEND file "docq/doc11.ps;01" May 21 10:00:08.95: [10019]: USE A4 page width (215 mm) May 21 10:00:08.95: [10019]: USE unlimited page length May 21 10:00:08.95: [10019]: USE 7.7 line/mm May 21 10:00:08.95: [10019]: USE 1-D MH May 21 10:00:08.95: [10019]: <-- [23:AT+FIS=1,5,0,2,0,0,0,3\r] May 21 10:00:09.07: [10019]: --> [2:OK] May 21 10:00:09.07: [10019]: <-- [7:AT+FDT\r] May 21 10:00:09.35: [10019]: --> [20:+FCS:1,5,0,2,0,0,0,3] May 21 10:00:15.97: [10019]: --> [7:CONNECT] May 21 10:00:15.97: [10019]: SEND begin page May 21 10:00:15.97: [10019]: <-- data [1027] _______________ May 21 10:00:36.98: [10019]: <-- data [569] May 21 10:00:36.98: [10019]: SENT 28217 bytes of data May 21 10:00:36.98: [10019]: SEND 1D RTC May 21 10:00:36.98: [10019]: <-- data [9] May 21 10:00:36.98: [10019]: SEND end page May 21 10:00:36.98: [10019]: SEND send MPS (more pages, same document) May 21 10:00:36.98: [10019]: <-- data [2] May 21 10:00:48.58: [10019]: --> [2:OK] May 21 10:00:48.58: [10019]: <-- [8:AT+FPS?\r] May 21 10:00:48.82: [10019]: --> [1:1] May 21 10:00:48.82: [10019]: --> [2:OK] May 21 10:00:48.82: [10019]: SEND recv MCF (message confirmation) May 21 10:00:48.83: [10019]: SEND FAX (000000044): FROM Mike@P-733.mwmcmlln TO ***-***-**** (page 1 of 4 sent in 0:40) May 21 10:00:48.83: [10019]: <-- [7:AT+FDT\r] May 21 10:00:49.19: [10019]: --> [7:CONNECT] May 21 10:00:49.19: [10019]: SEND begin page May 21 10:00:49.19: [10019]: <-- data [1028] _________________ May 21 10:01:15.77: [10019]: <-- data [428] May 21 10:01:17.92: [10019]: SENT 39340 bytes of data May 21 10:01:17.92: [10019]: SEND 1D RTC May 21 10:01:17.93: [10019]: <-- data [9] May 21 10:01:17.93: [10019]: SEND end page May 21 10:01:17.93: [10019]: SEND send MPS (more pages, same document) May 21 10:01:17.93: [10019]: <-- data [2] May 21 10:01:25.30: [10019]: --> [2:OK] May 21 10:01:25.31: [10019]: <-- [8:AT+FPS?\r] May 21 10:01:25.54: [10019]: --> [1:1] May 21 10:01:25.55: [10019]: --> [2:OK] May 21 10:01:25.55: [10019]: SEND recv MCF (message confirmation) May 21 10:01:25.55: [10019]: SEND FAX (000000044): FROM Mike@P-733.mwmcmlln TO ***-***-**** (page 2 of 4 sent in 0:37) ____________________ May 21 10:01:55.19: [10019]: SENT 41583 bytes of data May 21 10:01:55.19: [10019]: SEND 1D RTC May 21 10:01:55.19: [10019]: <-- data [9] May 21 10:01:55.30: [10019]: SEND end page May 21 10:01:55.30: [10019]: SEND send MPS (more pages, same document) May 21 10:01:55.30: [10019]: <-- data [2] May 21 10:02:04.17: [10019]: --> [2:OK] May 21 10:02:04.17: [10019]: <-- [8:AT+FPS?\r] May 21 10:02:04.41: [10019]: --> [1:1] May 21 10:02:04.41: [10019]: --> [2:OK] May 21 10:02:04.41: [10019]: SEND recv MCF (message confirmation) May 21 10:02:04.42: [10019]: SEND FAX (000000044): FROM Mike@P-733.mwmcmlln TO ***-***-**** (page 3 of 4 sent in 0:39) May 21 10:02:04.42: [10019]: <-- [7:AT+FDT\r] May 21 10:02:04.78: [10019]: --> [7:CONNECT] May 21 10:02:04.78: [10019]: SEND begin page ____________________ May 21 10:02:17.41: [10019]: SENT 14543 bytes of data May 21 10:02:17.41: [10019]: SEND 1D RTC May 21 10:02:17.41: [10019]: <-- data [9] May 21 10:02:17.41: [10019]: SEND end page May 21 10:02:17.41: [10019]: SEND send EOP (no more pages or documents) May 21 10:02:17.41: [10019]: <-- data [2] May 21 10:02:25.22: [10019]: --> [7:+FHS:00] May 21 10:02:25.22: [10019]: REMOTE HANGUP: Normal and proper end of connection (code 0) May 21 10:02:25.22: [10019]: SEND recv MCF (message confirmation) May 21 10:02:25.23: [10019]: SEND FAX (000000044): FROM Mike@P-733.mwmcmlln TO ***-***-**** (page 4 of 4 sent in 0:21) May 21 10:02:25.23: [10019]: SEND FAX (000000044): FROM Mike@P-733.mwmcmlln TO ***-***-**** (docq/doc11.ps;01 sent in 2:17) May 21 10:02:26.24: [10019]: <-- [5:ATH0\r] May 21 10:02:26.24: [10019]: --> [2:OK] May 21 10:02:26.24: [10019]: MODEM set DTR OFF May 21 10:02:26.24: [10019]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5) May 21 10:02:26.24: [10019]: SESSION END _____________ End of log file. I faxed four pages, and then went and picked them up. I think my modem config file needs a bit of tweakling in the ident section, and I noticed this line above: May 21 10:00:08.95: [10019]: USE A4 page width (215 mm) I'd prefer a normal letter size, and I'm wondering if this is teh result of t4eh negotiation with the fax reciever?: May 21 10:00:08.94: [10019]: REMOTE max A4 page width (215 mm) I ended up faxing right out of OpenOffice which I didn't really want to do, but couldn't seem to find a simple print to file as postscript. I'll probably want to be able to fax unmodified copies of this at various times so I'm figuring it would be easier to just fire up either kdeprintfax or jhylafax and send that way. Mike