Bonsoir Branché en e-sata, mon disque externe n'est pas reconnu à chaud. Il est reconnu comme sata s'il est branché et allumé au boot Cordialement Christophe
J'ai testé ca et malheureusement ca ne donne rien de mieux. D'autres pistes non plus : le partitionneur de suse ne voit pas le disque externe, seulement les 4 disques internes (sata ) j'ai fais un /cat/proc/scsi/scsi : # cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD1600PD-07F Rev: 05.0 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: ATA Model: WDC WD1600PD-07F Rev: 05.0 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: ST3320620AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: ATA Model: SAMSUNG HD103UJ Rev: 1AA0 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi4 Channel: 00 Id: 00 Lun: 00 Vendor: _NEC Model: DVD_RW ND-3500AG Rev: 2.86 Type: CD-ROM là on voit que zéro, un et quatre sont occupés par mes disques sata (Host: scsi0, Host: scsi, Host: scsi4) Quand je veut forcer le scan des hotes 2 et 3 ca ne donne rien de plus (pour tenter de peupler le fichier proc/scsi/scsi) : # echo 'scsi add-single-device 2 0 0 0' > /proc/scsi/scsi là aprés un reboot du pc : # dmesg | tail -20 [ 10.974766] type=1505 audit(1271167624.298:5): operation="profile_load" pid=996 name=/sbin/syslogd [ 11.030117] type=1505 audit(1271167624.354:6): operation="profile_load" pid=1000 name=/usr/sbin/avahi-daemon [ 11.081470] type=1505 audit(1271167624.405:7): operation="profile_load" pid=1005 name=/usr/sbin/identd [ 11.131843] type=1505 audit(1271167624.455:8): operation="profile_load" pid=1011 name=/usr/sbin/mdnsd [ 11.194025] type=1505 audit(1271167624.518:9): operation="profile_load" pid=1012 name=/usr/sbin/nscd [ 11.264390] type=1505 audit(1271167624.588:10): operation="profile_load" pid=1021 name=/usr/sbin/ntpd [ 11.312072] type=1505 audit(1271167624.636:11): operation="profile_load" pid=1022 name=/usr/sbin/traceroute [ 17.502820] powernow: This module only works with AMD K7 CPUs [ 18.243722] r8169: eth0: link up [ 18.243727] r8169: eth0: link up [ 18.374842] NET: Registered protocol family 17 [ 20.628602] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 20.628604] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 20.628605] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 20.628606] vboxdrv: the usage of hardware performance counters by [ 20.628607] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 20.628622] vboxdrv: Found 1 processor cores. [ 20.632557] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 20.632562] vboxdrv: Successfully loaded version 3.1.4 (interface 0x00100001). [ 21.072393] BIOS EDD facility v0.16 2004-Jun-25, 4 devices found si je débranche et rebranche le disque externe , ca ajoute des lignes en bas : linux-bogo:~ # dmesg | tail -20 [ 11.131843] type=1505 audit(1271167624.455:8): operation="profile_load" pid=1011 name=/usr/sbin/mdnsd [ 11.194025] type=1505 audit(1271167624.518:9): operation="profile_load" pid=1012 name=/usr/sbin/nscd [ 11.264390] type=1505 audit(1271167624.588:10): operation="profile_load" pid=1021 name=/usr/sbin/ntpd [ 11.312072] type=1505 audit(1271167624.636:11): operation="profile_load" pid=1022 name=/usr/sbin/traceroute [ 17.502820] powernow: This module only works with AMD K7 CPUs [ 18.243722] r8169: eth0: link up [ 18.243727] r8169: eth0: link up [ 18.374842] NET: Registered protocol family 17 [ 20.628602] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 20.628604] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 20.628605] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 20.628606] vboxdrv: the usage of hardware performance counters by [ 20.628607] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 20.628622] vboxdrv: Found 1 processor cores. [ 20.632557] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 20.632562] vboxdrv: Successfully loaded version 3.1.4 (interface 0x00100001). [ 21.072393] BIOS EDD facility v0.16 2004-Jun-25, 4 devices found [ 199.801416] ide-cd driver 5.00 [ 199.808932] ide-gd driver 1.18 [ 199.823449] st: Version 20081215, fixed bufsize 32768, s/g segs 256 Fabrice -- To unsubscribe, e-mail: opensuse-fr+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-fr+help@opensuse.org