El 7/01/07, Octavio Ávalos escribió:
linux:~ # faxaddmodem -s 14400 ttyS1
Warning, you have selected a DTE-DCE communication rate (14400) that differs from known standards. 14400 may not work correctly for sending and receiving facsimile: check your modem manual to make sure that 14400 is acceptable.
Pues vaya... 14400 es la única que no sirve (a eso le llamo tener puntería :-P): <none> enable no flow control between DTE and DCE <xon> enable software flow control between DTE and DCE <rts> enable hardware flow control between DTE and DCE <2400> set the DCE-DTE baud rate to 2400 bps <4800> set the DCE-DTE baud rate to 4800 bps <9600> set the DCE-DTE baud rate to 9600 bps <19200> set the DCE-DTE baud rate to 19200 bps <38400> set the DCE-DTE baud rate to 38400 bps <57600> set the DCE-DTE baud rate to 57600 bps <76800> set the DCE-DTE baud rate to 76800 bps <115200> set the DCE-DTE baud rate to 115200 bps Una vez que hayas definido la velocidad del módem con "setserial" vuelve a la carga con la velocidad que sí funciona (19200) a ver si así puede hablar con el módem. Saludos, -- Camaleón --------------------------------------------------------------------- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org