Justo estbe mirando el link de Camaleon, y aparece un detalle de lo
que te habia pasado antes, como alternativa al ndiswrapper:
1. You need to check if the bcm43xx-fwcutter package is installed
through: Yast > Software > Software Installation and search for
bcm43xx-fwcutter
2. Find the windows driver for your wireless chip. An example windows
driver was titled bcmwl5.sys Also note if you can't find yours try
doing a google search for wl_apsta.o (SUSE worked with both the
orginal windows driver and the wl_apsta.o at the time of this WIKI
post). Put the driver file on your desktop in SUSE.
3. Start the shell console (Kmenu >System > Terminal Program >
Terminal) and login as root with the command:
sux -
and type in the root password
Extract your firmware files from your wireless chip and store them in
the firmware file by typing in the following. (Note: Swap out the name
of your driver accordingly...in this example it is dirver.sty):
bcm43xx-fwcutter -w /lib/firmware ~/Desktop/driver.sty
4. Another way to install the firmware is using the install script
included in the bcm43xx-fwcutter package. You need to have a working
internet connection for this as it is attempted to download
driver.sty, next the firmware is extracted and stored in
/lib/firmware.
install_bcm43xx_firmware
5. Now that the firmware is ready for the driver to use, load the
module by typing the following:
modprobe bcm43xx
6. Reboot and now you can configure your WLAN card through YAST >
Network devices > Network card
[edit]
El 28/11/07, Harmless
Nanai de la china.
Gracias de todas formas.
Si se ocurre algo nuevo que pueda hacer, escribídlo, que por probar, me resisto a estar con la 10.1 con Wifi sin problemas y ahora con la 10.2 / 10.3 sin la red inalámbrica.
Salu2
El Miércoles, 28 de Noviembre de 2007 13:11, Juan Erbes escribió:
Puedes verificar en el sitio del fabricante si tiene algun driver para linux, con el firmware: http://www.broadcom.com/products/Wireless-LAN/802.11-Wireless-LAN-Solutions /BCM4318E
Salu2
--------------------------------------------------------------------- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org
--------------------------------------------------------------------- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org