El Miércoles, 19 de Marzo de 2008 23:55, Camaleón va escriure:
Pero si es un equipo "prescindible", prueba a pasar de nuevo el test que falla para ver si puede corregir el error automáticamente o si se trata de un error esporádico:
smartctl -t offline /dev/sda Aquí viene la salida: smartctl version 5.37 [i686-suse-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION === Model Family: Seagate Momentus 42 family Device Model: ST94019A Serial Number: 3KW35B01 Firmware Version: 3.05 User Capacity: 40,007,761,920 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Thu Mar 20 09:36:26 2008 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 119) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 426) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 31) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 055 051 034 Pre-fail Always - 37977019 3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 095 095 020 Old_age Always - 5263 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 103162040 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5469 10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3983 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 2336 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 485058 194 Temperature_Celsius 0x0022 039 054 000 Old_age Always - 39 195 Hardware_ECC_Recovered 0x001a 055 051 000 Old_age Always - 37977019 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 168 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 168 occurred at disk power-on lifetime: 5466 hours (227 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 5f 5b 2e e1 00 02:39:32.412 READ DMA 27 00 00 00 00 00 e0 00 02:39:32.412 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 02:39:32.403 IDENTIFY DEVICE ef 03 42 00 00 00 a0 02 02:39:27.387 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 02:39:27.387 READ NATIVE MAX ADDRESS EXT Error 167 occurred at disk power-on lifetime: 5466 hours (227 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 5f 5b 2e e1 00 02:39:32.412 READ DMA 27 00 00 00 00 00 e0 00 02:39:32.412 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 02:39:32.403 IDENTIFY DEVICE ef 03 42 00 00 00 a0 02 02:39:27.387 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 02:39:27.387 READ NATIVE MAX ADDRESS EXT Error 166 occurred at disk power-on lifetime: 5466 hours (227 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 5f 5b 2e e1 00 02:39:17.360 READ DMA 27 00 00 00 00 00 e0 00 02:39:17.360 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 02:39:17.352 IDENTIFY DEVICE ef 03 42 00 00 00 a0 02 02:39:27.387 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 02:39:27.387 READ NATIVE MAX ADDRESS EXT Error 165 occurred at disk power-on lifetime: 5466 hours (227 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 5f 5b 2e e1 00 02:39:17.360 READ DMA 27 00 00 00 00 00 e0 00 02:39:17.360 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 02:39:17.352 IDENTIFY DEVICE ef 03 42 00 00 00 a0 02 02:39:17.344 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 02:39:17.343 READ NATIVE MAX ADDRESS EXT Error 164 occurred at disk power-on lifetime: 5466 hours (227 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 5f 5b 2e e1 00 02:39:17.360 READ DMA 27 00 00 00 00 00 e0 00 02:39:17.360 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 02:39:17.352 IDENTIFY DEVICE ef 03 42 00 00 00 a0 02 02:39:17.344 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 02:39:17.343 READ NATIVE MAX ADDRESS EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 70% 5464 19815269 # 2 Short offline Completed: read failure 90% 5464 19815269 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Y comprueba si te aparece de nuevo el error.
¿Tienes algún otro sistema operativo instalado en ese disco?
No. Sólo Opensuse 10.3. (Tengo un windows xp en Virtualbox).
Saludos,
-- josep m solé