![](https://seccdn.libravatar.org/avatar/86026c72ade9bd2adfa570bfc633c211.jpg?s=120&d=mm&r=g)
Hello All, I am using Suse 5.2. My modem is work fine but only at 19200 I set the speed to 28800 in rc.config. now I can not dial in to my ISP anymore, it dial in I can hear the handshake but than it drops the line. In the log I get "Speed 28800 is not supported" My modem is a BahnBooster 288000 (elsa) it is working at full speed under windows. How do I set up my modem to use 28800? Thanks very much Stefan -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
![](https://seccdn.libravatar.org/avatar/1a9fbe9c6a0bff7979d327a2f7e993c7.jpg?s=120&d=mm&r=g)
On Wed, 25 Nov 1998, Stefan Nantz wrote:
|
|Hello All,
|
|I am using Suse 5.2. My modem is work fine but only at 19200
|I set the speed to 28800 in rc.config.
|
|now I can not dial in to my ISP anymore, it dial in I can hear the handshake
|but than it drops the line. In the log I get "Speed 28800 is not supported"
|
|My modem is a BahnBooster 288000 (elsa) it is working at full speed under
|windows.
i am using 5.2, the b-boost 33.6, in rc.conf is an empty string
for modem speed,
and in /sbin/init.d/boot.local:
stty ispeed 38400 < /dev/ttyS1
setserial /dev/ttyS1 spd_vhi
and in /etc/ppp/ppp-on
ppp-on:PPP_FLAGS="38400 mru 1500 modem debug kdebug 0 defaultroute \
crtscts noipdefault asyncmap 20A0000 escape FF"
hope it helps !
Gruss / with best regards
Jens-Eike Jesau
participants (2)
-
jesau@warpserv.fh-bielefeld.de
-
stefan.nantz@seagatesoftware.com