Ich habe mir folgendes Binary gezogen und stelle fest, ich weiß nicht wie ich es auspacken kann. 'xfsft-1.0.3.linux-i586-libc6.gz' Muß es überhaupt? Ich weiß jedenfalls nicht weiter damit. Tar xvfz und unzip haben sich als wirkungslos erwiesen. Was muß ich anstellen, um das Programm zu nutzen? Ich habe Suse-Linux 5.3 -- Hartmut Gehrke-Tschudi | Die Deutsche Bank verfügt heute über ein Geschäfts- Bochum | volumen, das dreimal den Umfang des Bundeshaushaltes BRD | umfaßt und übt damit mehr wirtschaftlichen und | politischen Einfluß aus als der ganze Bundestag. -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
H . Gehrke-Tschudi schrieb:
Ich habe mir folgendes Binary gezogen und stelle fest, ich weiß nicht wie ich es auspacken kann. 'xfsft-1.0.3.linux-i586-libc6.gz'
'gzip -d xfsft-1.0.3.linux-i586-libc6.gz' Gruß Thomas -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
"H . Gehrke-Tschudi" wrote:
Ich habe mir folgendes Binary gezogen und stelle fest, ich weiß nicht wie ich es auspacken kann. 'xfsft-1.0.3.linux-i586-libc6.gz' Muß es überhaupt? Ich weiß jedenfalls nicht weiter damit. Tar xvfz und unzip haben sich als wirkungslos erwiesen.
Ergaenzend zu dem gzip tip: Du solltest dir mal den mc (midnight commande = norton commander clone, nur viel besser) ansehen. Komprimierte Dateien kannst Du dort aus dem User-Menue heraus dekomprimieren. Archive wie z.B. tar.gz tar.bz2 tar.Z .deb .slp .rpm oeffnest du einfach mit der Enter-Taste. Henning -- H. Henning Vossieck - h.vossieck@ndh.net - <A HREF="http://www.ndh.net/home/vossieck/"><A HREF="http://www.ndh.net/home/vossieck/</A">http://www.ndh.net/home/vossieck/</A</A>> 49 2291 3010/6519 -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
On Mon, 29 Mar 1999, H . Gehrke-Tschudi wrote:
Ich habe mir folgendes Binary gezogen und stelle fest, ich weiß nicht wie ich es auspacken kann. 'xfsft-1.0.3.linux-i586-libc6.gz'
gunzip xfsft-1.0.3.linux-i586-libc6.gz
Was muß ich anstellen, um das Programm zu nutzen?
Du weisst, dass Du die libc6 brauchst?! Ich weiss zwar nicht, was das fuer ein Programm ist - aber vielleicht solltest Du Dir die Sourcen ziehen und auf Deinem Rechner compilieren. Dann laeuft es auch mit der libc5 - oder koennte zumindest eventuell damit laufen, wenn es keine speziellen Erweiterungen der neuen Libs benoetigt. Oder noch eleganter: Das ganze System auf libc6 umstellen - aber das ist keine Sache von einem Nachmittag.
Ich habe Suse-Linux 5.3
... und SuSE 5.3 laeuft AFAIR mit libc5 ... Tschau, Volker -- Volker Mueller,volker.mueller@gmx.de,<A HREF="http://www.in-berlin.de/user/flinux"><A HREF="http://www.in-berlin.de/user/flinux</A">http://www.in-berlin.de/user/flinux</A</A>> CPU idle? Kein Problem - wir wissen Rat: <A HREF="http://www.distributed.net"><A HREF="http://www.distributed.net</A">http://www.distributed.net</A</A>> -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
On Mon, Mar 29, 1999 at 09:38:09PM +0200, Volker Mueller wrote:
Du weisst, dass Du die libc6 brauchst?! Ich weiss zwar nicht, was das fuer ein Programm ist - aber vielleicht solltest Du Dir die Sourcen ziehen und auf Deinem Rechner compilieren. Dann laeuft es auch mit der libc5 - oder koennte zumindest eventuell damit laufen, wenn es keine speziellen Erweiterungen der neuen Libs benoetigt. Oder noch eleganter: Das ganze System auf libc6 umstellen - aber das ist keine Sache von einem Nachmittag.
Ich habe Suse-Linux 5.3
... und SuSE 5.3 laeuft AFAIR mit libc5 ...
Ich meine, daß ich libc6 auf meiner Suse 5.3 habe. oder deute ich das falsch?: ' l /usr/i486-linux-libc6/lib/' -rwxr-xr-x 1 root root 3759131 Jul 5 1998 libc.so.6* Das müßte doch dann gehen, wenn ich 'gunzip xfsft-1.0.3.linux-i586-libc6.gz' eingebe. Bringt aber nur: gunzip: xfsft-1.0.3.linux-i586-libc6.gz: not in gzip format ^^^^^^^^^^^^^^^^^^ Das verstehe einer! -- Hartmut Gehrke-Tschudi | Die Deutsche Bank verfügt heute über ein Geschäfts- Bochum | volumen, das dreimal den Umfang des Bundeshaushaltes BRD | umfaßt und übt damit mehr wirtschaftlichen und | politischen Einfluß aus als der ganze Bundestag. -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
"H . Gehrke-Tschudi" wrote:
On Mon, Mar 29, 1999 at 09:38:09PM +0200, Volker Mueller wrote:
Du weisst, dass Du die libc6 brauchst?! Ich weiss zwar nicht, was das fuer ein Programm ist - aber vielleicht solltest Du Dir die Sourcen ziehen und auf Deinem Rechner compilieren. Dann laeuft es auch mit der libc5 - oder koennte zumindest eventuell damit laufen, wenn es keine speziellen Erweiterungen der neuen Libs benoetigt. Oder noch eleganter: Das ganze System auf libc6 umstellen - aber das ist keine Sache von einem Nachmittag.
Ich habe Suse-Linux 5.3
... und SuSE 5.3 laeuft AFAIR mit libc5 ...
Ich meine, daß ich libc6 auf meiner Suse 5.3 habe. oder deute ich das falsch?:
' l /usr/i486-linux-libc6/lib/' -rwxr-xr-x 1 root root 3759131 Jul 5 1998 libc.so.6*
Das müßte doch dann gehen, wenn ich 'gunzip xfsft-1.0.3.linux-i586-libc6.gz' eingebe. Bringt aber nur: gunzip: xfsft-1.0.3.linux-i586-libc6.gz: not in gzip format
Probier mal 'file xfsft-1.0.3.linux-i586-libc6.gz'. Ich wette, dass du diese Ausgabe erhaeltst (und das die Groesse nicht etwa 210kb sondern 427810bytes ist): xfsft-1.0.3.linux-i586-libc6.gz: ELF 32-bit LSB executable, Intel 80386, version 1, dynamically linked (uses shared libs), not stripped Na? Mit anderen Worten, deine .gz ist nicht mehr komprimiert. Hast du das Teil mit Netscape geholt? Der dekomprimiert gleich. Also: 1. Bei Netscape .gz Downloads Groessen vergleichen 2. Das 'file' Kommando merken. Ist ne feine Sache. Gibt zu fast allen Dateien den Typ an. Du scheinst auch libc6 zu haben, muesstest also auch glibc Programme ausfuehren koennen. Voraussetzung is ein EIntrag /usr/i486-linux-libc6/lib=libc6 in der /etc/ld.so.conf. Du kannst das ueberpruefen mit 'ldconfig -NXvt | less'. Henning -- H. Henning Vossieck - h.vossieck@ndh.net - <A HREF="http://www.ndh.net/home/vossieck/"><A HREF="http://www.ndh.net/home/vossieck/</A">http://www.ndh.net/home/vossieck/</A</A>> 49 2291 3010/6519 -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
hhv wrote:
Du scheinst auch libc6 zu haben, muesstest also auch glibc Programme ausfuehren koennen. Voraussetzung is ein EIntrag /usr/i486-linux-libc6/lib=libc6 in der /etc/ld.so.conf.
ist das "=libc5" bzw. "=libc6" zwingend vorgeschrieben ?? oder kommt das erst mit suse 6.x daher ? wie verhällt es sich, wenn in /usr/lib bzw. /lib schon 6er libs sind ?
Henning
-- Mfg. Joerg -- Henner & Bullinger, Datentechnik GbR | Tel.: +49 (7 11) 2 85 19 05 Linux, Netzwerke, Webhosting & Authoring | D2: +49 (1 72) 7 35 31 09 | Fax: +49 (7 11) 5 78 06 92 Geschäftsleitung, Perl/CGI, Support | <A HREF="http://www.star.bawue.com"><A HREF="http://www.star.bawue.com</A">http://www.star.bawue.com</A</A>> -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
On Tue, Mar 30, 1999 at 10:27:09AM +0200, hhv wrote:
"H . Gehrke-Tschudi" wrote:
On Mon, Mar 29, 1999 at 09:38:09PM +0200, Volker Mueller wrote:
Probier mal 'file xfsft-1.0.3.linux-i586-libc6.gz'.
Ich wette, dass du diese Ausgabe erhaeltst (und das die Groesse nicht etwa 210kb sondern 427810bytes ist):
xfsft-1.0.3.linux-i586-libc6.gz: ELF 32-bit LSB executable, Intel 80386, version 1, dynamically linked (uses shared libs), not stripped
Na?
Du hast recht! 427810bytes. Fast die selbe Ausgabe! es fehlt nur: (uses shared libs)
Mit anderen Worten, deine .gz ist nicht mehr komprimiert. Hast du das Teil mit Netscape geholt? Der dekomprimiert gleich.
Also: 1. Bei Netscape .gz Downloads Groessen vergleichen 2. Das 'file' Kommando merken. Ist ne feine Sache. Gibt zu fast allen Dateien den Typ an.
Danke.
Du scheinst auch libc6 zu haben, muesstest also auch glibc Programme ausfuehren koennen. Voraussetzung is ein EIntrag
/usr/i486-linux-libc6/lib=libc6
in der /etc/ld.so.conf.
Der Eintrag ist da.
Du kannst das ueberpruefen mit 'ldconfig -NXvt | less'.
Das klappt nicht. Bringt nur ein leeres File. Sag mir doch bitte noch, wie ich das Programm starten kann. -- Hartmut Gehrke-Tschudi | Die Deutsche Bank verfügt heute über ein Geschäfts- Bochum | volumen, das dreimal den Umfang des Bundeshaushaltes BRD | umfaßt und übt damit mehr wirtschaftlichen und | politischen Einfluß aus als der ganze Bundestag. -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
"H . Gehrke-Tschudi" wrote:
Du kannst das ueberpruefen mit 'ldconfig -NXvt | less'.
Das klappt nicht. Bringt nur ein leeres File. Sag mir doch bitte noch, wie ich das Programm starten kann.
Sorry, Tippfehler: ldconfig -NXvp | less oder auch einfach ldconfig -v | less Henning -- H. Henning Vossieck - h.vossieck@ndh.net - <A HREF="http://www.ndh.net/home/vossieck/"><A HREF="http://www.ndh.net/home/vossieck/</A">http://www.ndh.net/home/vossieck/</A</A>> 49 2291 3010/6519 -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
On Tue, Mar 30, 1999 at 11:17:27PM +0200, hhv wrote:
"H . Gehrke-Tschudi" wrote:
Sorry, Tippfehler: ldconfig -NXvp | less oder auch einfach ldconfig -v | less
Danke! Und wie kriege ich das Programm nun zum Laufen? ;-) -- Hartmut Gehrke-Tschudi | Die Deutsche Bank verfügt heute über ein Geschäfts- Bochum | volumen, das dreimal den Umfang des Bundeshaushaltes BRD | umfaßt und übt damit mehr wirtschaftlichen und | politischen Einfluß aus als der ganze Bundestag. -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
"H . Gehrke-Tschudi" wrote:
On Tue, Mar 30, 1999 at 11:17:27PM +0200, hhv wrote:
"H . Gehrke-Tschudi" wrote:
Sorry, Tippfehler: ldconfig -NXvp | less oder auch einfach ldconfig -v | less
Danke! Und wie kriege ich das Programm nun zum Laufen? ;-)
Was war den ausser dem Dekomprimieren sonst noch das Problem? Wenn es nicht laeuft, was fuer Fehlermeldungen bekommst du? Henning -- H. Henning Vossieck - h.vossieck@ndh.net - <A HREF="http://www.ndh.net/home/vossieck/"><A HREF="http://www.ndh.net/home/vossieck/</A">http://www.ndh.net/home/vossieck/</A</A>> 49 2291 3010/6519 -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
"H . Gehrke-Tschudi" wrote:
On Tue, Mar 30, 1999 at 11:17:27PM +0200, hhv wrote:
"H . Gehrke-Tschudi" wrote:
Sorry, Tippfehler: ldconfig -NXvp | less oder auch einfach ldconfig -v | less
Danke! Und wie kriege ich das Programm nun zum Laufen? ;-)
Hmm ... Hab mir das Biest mal angesehen. Es scheint sich um einen FontServer fuer x zu handeln. Ich weiss garnicht, was du willst. STartet doch einwandfrei. Tut zwar bei mir nix. Aber da ich so was nicht verwende, auch nix dafuer configuriert habe, hat er ja bei mir auch nur das zu tun, was jeder Server tut: Darauf warten,das jemand was von ihm will. Wenn du dir das Ding geholt hast, nehme ich an, dass du weisst, was du damit anfangen kannst oder willst. Sollte aber irgendwo auch etwas Docu, Beispiele fuer config Dateien etc geben, oder. Falls er bei dir nicht startet, hast du vielleicht vergessen, das executable Attribut zu setzen? chmod ... Uebrigens, seine Konfigurations und sonstigen Dateien scheint er in /usr/X11/lib/X11/fs/ zu erwarten Henning -- H. Henning Vossieck - h.vossieck@ndh.net - <A HREF="http://www.ndh.net/home/vossieck/"><A HREF="http://www.ndh.net/home/vossieck/</A">http://www.ndh.net/home/vossieck/</A</A>> 49 2291 3010/6519 -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
On Wed, Mar 31, 1999 at 03:36:06PM +0200, hhv wrote:
Danke! Und wie kriege ich das Programm nun zum Laufen? ;-)
Hmm ... Hab mir das Biest mal angesehen. Es scheint sich um einen FontServer fuer x zu handeln. i
Richtig!
Ich weiss garnicht, was du willst. STartet doch einwandfrei. Starten?!?!?:-( Wie? Bei mir startet da nix. Aber sicher bin ich zu blöd dafür Also darum einmal langsam: Ich habe das File: -rwx--x--x 1 hgt users 427810 Mar 29 16:24 xfsft-1.0.3.linux-i586-libc6.gz* Executable Attribut ist gesetzt.
Wat nu? Wenn ich 'xfsft-1.0.3.linux-i586-libc6.gz' eingebe, kommt natürlich: 'bash: xfsft-1.0.3.linux-i586-libc6.gz: command not found'
Uebrigens, seine Konfigurations und sonstigen Dateien scheint er in /usr/X11/lib/X11/fs/ zu erwarten
wundert mich, woraus du das liest -- Hartmut Gehrke-Tschudi | Die Deutsche Bank verfügt heute über ein Geschäfts- Bochum | volumen, das dreimal den Umfang des Bundeshaushaltes BRD | umfaßt und übt damit mehr wirtschaftlichen und | politischen Einfluß aus als der ganze Bundestag. -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
"H . Gehrke-Tschudi" wrote:
On Wed, Mar 31, 1999 at 03:36:06PM +0200, hhv wrote:
Danke! Und wie kriege ich das Programm nun zum Laufen? ;-)
Hmm ... Hab mir das Biest mal angesehen. Es scheint sich um einen FontServer fuer x zu handeln. i
Richtig!
Ich weiss garnicht, was du willst. STartet doch einwandfrei. Starten?!?!?:-( Wie? Bei mir startet da nix. Aber sicher bin ich zu blöd dafür Also darum einmal langsam: Ich habe das File: -rwx--x--x 1 hgt users 427810 Mar 29 16:24 xfsft-1.0.3.linux-i586-libc6.gz* Executable Attribut ist gesetzt.
Wat nu? Wenn ich 'xfsft-1.0.3.linux-i586-libc6.gz' eingebe, kommt natürlich: 'bash: xfsft-1.0.3.linux-i586-libc6.gz: command not found'
1. Willst du das teil nicht mal umbenennen? z.B. in xfsft? Ist sowieso .gz. OK ausfuehrbar ist es. In welchem Verzeichnis ist das Ding? Wenn es nicht in einem Verzeichnis liegt, das im Pfad ist kannst du es nicht ausfuehren. Also: am besten in /usr/X11/bin kopieren, X starten, u.U. 'man xfs'
Uebrigens, seine Konfigurations und sonstigen Dateien scheint er in /usr/X11/lib/X11/fs/ zu erwarten
wundert mich, woraus du das liest
Beim starten als nicht root user hat das Ding eine error message von sich gegeben. Henning -- H. Henning Vossieck - h.vossieck@ndh.net - <A HREF="http://www.ndh.net/home/vossieck/"><A HREF="http://www.ndh.net/home/vossieck/</A">http://www.ndh.net/home/vossieck/</A</A>> 49 2291 3010/6519 -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
"H . Gehrke-Tschudi" wrote:
... und SuSE 5.3 laeuft AFAIR mit libc5 ... Ich meine, daß ich libc6 auf meiner Suse 5.3 habe. oder deute ich das falsch?:
' l /usr/i486-linux-libc6/lib/' -rwxr-xr-x 1 root root 3759131 Jul 5 1998 libc.so.6*
i love it ;) der wohl einzige grund, der deutlich FÜR suse spricht, wenn man von der einsteiger-einfachheit mal absieht ;)
Das müßte doch dann gehen, wenn ich 'gunzip xfsft-1.0.3.linux-i586-libc6.gz' eingebe. Bringt aber nur: gunzip: xfsft-1.0.3.linux-i586-libc6.gz: not in gzip format Das verstehe einer!
eigentlich sieht es so aus, als sollte es gehen. hast du mal "gzip -d" propiert ? was sagt "ldconfig -D >/dev/null" für fehler ?? Mfg. Joerg -- Henner & Bullinger, Datentechnik GbR | Tel.: +49 (7 11) 2 85 19 05 Linux, Netzwerke, Webhosting & Authoring | D2: +49 (1 72) 7 35 31 09 | Fax: +49 (7 11) 5 78 06 92 Geschäftsleitung, Perl/CGI, Support | <A HREF="http://www.star.bawue.com"><A HREF="http://www.star.bawue.com</A">http://www.star.bawue.com</A</A>> -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
tar -xvfz (wennschon, dann klein) funktioniert so nicht, weil es kein ge-tar-tes file ist. 'man gzip' hilft Dir weiter. (Verwende entweder gzip oder gunzip.) Klaus H . Gehrke-Tschudi schrieb:
Ich habe mir folgendes Binary gezogen und stelle fest, ich weiß nicht wie ich es auspacken kann. 'xfsft-1.0.3.linux-i586-libc6.gz' Muß es überhaupt? Ich weiß jedenfalls nicht weiter damit. Tar xvfz und unzip haben sich als wirkungslos erwiesen. Was muß ich anstellen, um das Programm zu nutzen? Ich habe Suse-Linux 5.3 -- Hartmut Gehrke-Tschudi | Die Deutsche Bank verfügt heute über ein Geschäfts- Bochum | volumen, das dreimal den Umfang des
Bundeshaushaltes
BRD | umfaßt und übt damit mehr wirtschaftlichen und | politischen Einfluß aus als der ganze Bundestag.
-- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
-- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
participants (6)
-
h.vossieck@ndh.net
-
hgt@vitzlipu.ruhr.de
-
jhe@star.bawue.com
-
klausdebes@t-online.de
-
tm@marciniak.de
-
volker.mueller@gmx.de