Hallo Renate, Renate Neike schrieb:

Schau mal, ob es einen Link ins entsprechende Run-Level zu /etc/init.d/alsasound gibt.

ls -l /etc/init.d/rc5.d/*alsasound

Da sollte es einen Link zum Starten - mit einem "S" vorangestellt - und einen Link zum Stoppen - mit einem "K" vorangestellt - geben.

Die Links gibt es.

Sind diese Links vorhanden und der Sound startet nicht, ist ein Blick in die /var/log/boot.msg ein guter Plan. Da kannst du evt. erkennen, welche Probleme es beim Starten von alsasound gibt.

Im boot.msg habe ich mal nach sound, alsa und intel gesucht, aber keine Meldung zum Soundtreiber gefunden. Ich habe die boot.msg mal angehangen. Viele Grüße MNarko Inspecting /boot/System.map-2.6.18.8-0.5-default Loaded 23389 symbols from /boot/System.map-2.6.18.8-0.5-default. Symbols match kernel version 2.6.18. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <5>Linux version 2.6.18.8-0.5-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Fri Jun 22 12:17:53 UTC 2007 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) <4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) <4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000001dee0000 (usable) <4> BIOS-e820: 000000001dee0000 - 000000001deec000 (ACPI data) <4> BIOS-e820: 000000001deec000 - 000000001df00000 (ACPI NVS) <4> BIOS-e820: 000000001df00000 - 0000000020000000 (reserved) <4> BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) <4> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) <4> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) <5>0MB HIGHMEM available. <5>478MB LOWMEM available. <7>On node 0 totalpages: 122592 <7> DMA zone: 4096 pages, LIFO batch:0 <7> Normal zone: 118496 pages, LIFO batch:31 <6>DMI present. <6>Using APIC driver default <6>IO/L-APIC allowed because system is MP or new enough <7>ACPI: RSDP (v000 ACER ) @ 0x000f6050 <7>ACPI: RSDT (v001 ACER Wagtail 0x20020114 LTP 0x00000000) @ 0x1dee5a39 <7>ACPI: FADT (v001 ACER Wagtail 0x20020114 PTL 0x00000050) @ 0x1deebf2c <7>ACPI: HPET (v001 ACER Wagtail 0x20020114 PTL 0x00000000) @ 0x1deebfa0 <7>ACPI: BOOT (v001 ACER Wagtail 0x20020114 LTP 0x00000001) @ 0x1deebfd8 <7>ACPI: DSDT (v001 ACER Wagtail 0x20020114 MSFT 0x0100000e) @ 0x00000000 <6>ACPI: PM-Timer IO Port: 0x1008 <6>ACPI: HPET id: 0x8086a201 base: 0x0 <4>Allocating PCI resources starting at 30000000 (gap: 20000000:dec10000) <4>Detected 1495.199 MHz processor. <4>Built 1 zonelists. Total pages: 122592 <5>Kernel command line: root=/dev/hda2 resume=/dev/hda3 splash=silent <6>bootsplash: silent mode. <4>Local APIC disabled by BIOS -- you can enable it with "lapic" <7>mapped APIC to ffffd000 (013ca000) <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Initializing CPU#0 <4>PID hash table entries: 2048 (order: 11, 8192 bytes) <4>Console: colour VGA+ 80x25 <4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) <4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) <6>Memory: 479240k/490368k available (1697k kernel code, 10632k reserved, 1000k data, 196k init, 0k highmem) <4>Checking if this processor honours the WP bit even in supervisor mode... Ok. <4>Calibrating delay using timer specific routine.. 2992.25 BogoMIPS (lpj=5984502) <6>Security Framework v1.0.0 initialized <4>Mount-cache hash table entries: 512 <7>CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 <7>CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 <6>CPU: L1 I cache: 32K, L1 D cache: 32K <6>CPU: L2 cache: 1024K <7>CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 00000180 00000000 00000000 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <4>Compat vDSO mapped to ffffe000. <6>Checking 'hlt' instruction... OK. <6>SMP alternatives: switching to UP code <6>Freeing SMP alternatives: 16k freed <6>checking if image is initramfs... it is <6>Freeing initrd memory: 2962k freed <6>ACPI: Core revision 20060707 <4>ACPI: setting ELCR to 0200 (from 0c00) <4>CPU0: Intel(R) Pentium(R) M processor 1500MHz stepping 05 <5>SMP motherboard not detected. <5>Local APIC not detected. Using dummy APIC emulation. <6>Brought up 1 CPUs <4>migration_cost=0 <6>NET: Registered protocol family 16 <6>ACPI: bus type pci registered <6>PCI: PCI BIOS revision 2.10 entry at 0xfd742, last bus=2 <6>PCI: Using configuration type 1 <4>Setting up standard PCI resources <6>ACPI: Interpreter enabled <6>ACPI: Using PIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <7>PCI: Probing PCI hardware (bus 00) <7>Boot video device is 0000:00:02.0 <4>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO <4>PCI quirk: region 1180-11bf claimed by ICH4 GPIO <6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 <6>PCI: Transparent bridge - 0000:00:1e.0 <4>PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses') <4>Please report the result to linux-kernel to fix this permanently <4>PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses') <4>Please report the result to linux-kernel to fix this permanently <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs *11) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs *10) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs *10) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *11 <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *11 <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKH] (IRQs *10) <6>ACPI: Embedded Controller [EC0] (gpe 29) interrupt mode. <6>ACPI: Power Resource [PFN0] (off) <6>ACPI: Power Resource [PFN1] (off) <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>pnp: PnP ACPI init <6>pnp: PnP ACPI: found 11 devices <6>PnPBIOS: Disabled by ACPI PNP <6>PCI: Using ACPI for IRQ routing <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <4>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 <4>PCI: Bus 3, cardbus bridge: 0000:02:06.0 <4> IO window: 00003000-000030ff <4> IO window: 00003400-000034ff <4> PREFETCH window: 30000000-31ffffff <4> MEM window: 36000000-37ffffff <4>PCI: Bus 7, cardbus bridge: 0000:02:06.1 <4> IO window: 00003800-000038ff <4> IO window: 00003c00-00003cff <4> PREFETCH window: 32000000-33ffffff <4> MEM window: 38000000-39ffffff <6>PCI: Bridge: 0000:00:1e.0 <6> IO window: 3000-3fff <6> MEM window: e0200000-e07fffff <6> PREFETCH window: 30000000-33ffffff <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64 <4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 <7>PCI: setting IRQ 10 as level-triggered <6>ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 <6>ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 <6>NET: Registered protocol family 2 <4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes) <4>TCP established hash table entries: 16384 (order: 5, 131072 bytes) <4>TCP bind hash table entries: 8192 (order: 4, 65536 bytes) <6>TCP: Hash tables configured (established 16384 bind 8192) <6>TCP reno registered <6>Simple Boot Flag at 0x37 set to 0x1 <6>Machine check exception polling timer started. <6>apm: BIOS not found. <6>audit: initializing netlink socket (disabled) <5>audit(1189585090.756:1): initialized <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>Initializing Cryptographic API <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Real Time Clock Driver v1.12ac <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A <6>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 <6>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 <6>ACPI: PCI interrupt for device 0000:00:1f.6 disabled <4>floppy0: no floppy controllers found <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>mice: PS/2 mouse device common for all mice <6>input: PC Speaker as /class/input/input0 <6>input: AT Translated Set 2 keyboard as /class/input/input1 <6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: bitmap version 4.39 <6>NET: Registered protocol family 1 <4>Using IPI No-Shortcut mode <6>ACPI: (supports S0 S3 S4 S5) <6>Freeing unused kernel memory: 196k freed <6>Time: tsc clocksource has been installed. <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>ICH4: IDE controller at PCI slot 0000:00:1f.1 <4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) <6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 <6>ICH4: chipset revision 3 <6>ICH4: not 100% native mode: will probe irqs later <6> ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio <6> ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio <7>Probing IDE interface ide0... <4>hda: SAMSUNG HM080HC, ATA DISK drive <6>Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006 <6>input: SynPS/2 Synaptics TouchPad as /class/input/input2 <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <7>Probing IDE interface ide1... <4>hdc: UJDA740 DVD/CDRW, ATAPI CD/DVD-ROM drive <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>ACPI: Transitioning device [FAN0] to D3 <4>ACPI: Transitioning device [FAN0] to D3 <6>ACPI: Fan [FAN0] (off) <4>ACPI: Transitioning device [FAN1] to D3 <4>ACPI: Transitioning device [FAN1] to D3 <6>ACPI: Fan [FAN1] (off) <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found <6>usbcore: registered new driver usbfs <6>usbcore: registered new driver hub <6>USB Universal Host Controller Interface driver v3.0 <4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 <7>PCI: setting IRQ 11 as level-triggered <6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 <7>PCI: Setting latency timer of device 0000:00:1d.0 to 64 <6>uhci_hcd 0000:00:1d.0: UHCI Host Controller <6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 <6>uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820 <6>usb usb1: new device found, idVendor=0000, idProduct=0000 <6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: UHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.18.8-0.5-default uhci_hcd <6>usb usb1: SerialNumber: 0000:00:1d.0 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 2 ports detected <5>SCSI subsystem initialized <7>libata version 2.00 loaded. <4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 <6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 <7>PCI: Setting latency timer of device 0000:00:1d.1 to 64 <6>uhci_hcd 0000:00:1d.1: UHCI Host Controller <6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 <6>uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001840 <6>usb usb2: new device found, idVendor=0000, idProduct=0000 <6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: UHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.18.8-0.5-default uhci_hcd <6>usb usb2: SerialNumber: 0000:00:1d.1 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 2 ports detected <6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 <7>PCI: Setting latency timer of device 0000:00:1d.2 to 64 <6>uhci_hcd 0000:00:1d.2: UHCI Host Controller <6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 <6>uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001860 <6>usb usb3: new device found, idVendor=0000, idProduct=0000 <6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb3: Product: UHCI Host Controller <6>usb usb3: Manufacturer: Linux 2.6.18.8-0.5-default uhci_hcd <6>usb usb3: SerialNumber: 0000:00:1d.2 <6>usb usb3: configuration #1 chosen from 1 choice <6>hub 3-0:1.0: USB hub found <6>hub 3-0:1.0: 2 ports detected <4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 <6>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 <7>PCI: Setting latency timer of device 0000:00:1d.7 to 64 <6>ehci_hcd 0000:00:1d.7: EHCI Host Controller <6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 <6>ehci_hcd 0000:00:1d.7: debug port 1 <7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7 <6>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xe0100000 <6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <6>usb usb4: new device found, idVendor=0000, idProduct=0000 <6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb4: Product: EHCI Host Controller <6>usb usb4: Manufacturer: Linux 2.6.18.8-0.5-default ehci_hcd <6>usb usb4: SerialNumber: 0000:00:1d.7 <6>usb usb4: configuration #1 chosen from 1 choice <6>hub 4-0:1.0: USB hub found <6>hub 4-0:1.0: 6 ports detected <6>hda: max request size: 512KiB <6>hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) <6>hda: cache flushes supported <6> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 > <6>usb 3-2: new full speed USB device using uhci_hcd and address 2 <4>Attempting manual resume <6>usb 3-2: new device found, idVendor=0451, idProduct=2036 <6>usb 3-2: new device strings: Mfr=0, Product=1, SerialNumber=0 <6>usb 3-2: Product: General Purpose USB Hub <6>usb 3-2: configuration #1 chosen from 1 choice <6>hub 3-2:1.0: USB hub found <6>hub 3-2:1.0: 3 ports detected <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda2, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>usb 3-2.3: new full speed USB device using uhci_hcd and address 3 <6>usb 3-2.3: new device found, idVendor=0483, idProduct=1307 <6>usb 3-2.3: new device strings: Mfr=1, Product=2, SerialNumber=3 <6>usb 3-2.3: Product: USB Mass Storage Device <6>usb 3-2.3: Manufacturer: Generic <6>usb 3-2.3: SerialNumber: ABCDEF0123456789 <6>usb 3-2.3: configuration #1 chosen from 1 choice <6>Linux agpgart interface v0.101 (c) Dave Jones <6>agpgart: Detected an Intel 855 Chipset. <6>agpgart: Detected 32636K stolen memory. <6>agpgart: AGP aperture is 128M @ 0xe8000000 <6>Initializing USB Mass Storage driver... <6>scsi0 : SCSI emulation for USB Mass Storage devices <7>usb-storage: device found at 3 <7>usb-storage: waiting for device to settle before scanning <6>usbcore: registered new driver usb-storage <6>USB Mass Storage support registered. <6>NET: Registered protocol family 23 <6>parport: PnPBIOS parport detected. <6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] <6>i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0) <6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 <6>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) <6>Uniform CD-ROM driver Revision: 3.20 <3>intel_rng: FWH not detected <6>nsc-ircc, chip->init <6>nsc-ircc, Found chip at base=0x04e <6>nsc-ircc, driver loaded (Dag Brattli) <4>nsc_ircc_open(), can't get iobase of 0x2f8 <6>nsc-ircc, Found chip at base=0x04e <6>nsc-ircc, driver loaded (Dag Brattli) <4>nsc_ircc_open(), can't get iobase of 0x2f8 <6>pnp: Device 00:0a disabled. <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 <7>ieee1394: Initialized config rom entry `ip1394' <6>ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 <6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e0209000-e02097ff] Max Packet=[2048] IR/IT contexts=[4/8] <7>ieee80211_crypt: registered algorithm 'NULL' <6>b44.c:v1.01 (Jun 16, 2006) <6>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 <6>eth0: Broadcom 4400 10/100BaseT Ethernet 00:c0:9f:30:8d:1b <6>ieee80211: 802.11 data/management/control stack, git-1.1.13 <6>ieee80211: Copyright (C) 2004-2005 Intel Corporation <6>Yenta: CardBus bridge found at 0000:02:06.0 [1025:0035] <6>Yenta O2: res at 0x94/0xD4: 00/ea <6>Yenta O2: enabling read prefetch/write burst <6>ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 <6>ipw2100: Copyright(c) 2003-2006 Intel Corporation <5> Vendor: Generic Model: Flash R/W Rev: 2002 <5> Type: Direct-Access ANSI SCSI revision: 02 <7>usb-storage: device scan complete <6>Yenta: ISA IRQ mask 0x0038, PCI irq 10 <6>Socket status: 30000006 <6>Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 <6>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff <6>cs: IO port probe 0x3000-0x3fff: clean. <6>pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe07fffff <6>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff <6>Yenta: CardBus bridge found at 0000:02:06.1 [1025:0035] <5>scsi 0:0:0:0: Attached scsi generic sg0 type 0 <6>Yenta: ISA IRQ mask 0x0038, PCI irq 10 <6>Socket status: 30000410 <6>Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a <6>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff <6>cs: IO port probe 0x3000-0x3fff: clean. <6>pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe07fffff <6>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff <4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 <6>ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10 <6>ipw2100: Detected Intel PRO/Wireless 2100 Network Connection <5>pccard: PCMCIA card inserted into slot 1 <6>cs: memory probe 0xe0200000-0xe07fffff: excluding 0xe0200000-0xe025ffff <5>pcmcia: registering new device pcmcia1.0 <6>cs: IO port probe 0x100-0x3af: clean. <6>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 <6>cs: IO port probe 0x820-0x8ff: clean. <6>cs: IO port probe 0xc00-0xcf7: clean. <6>cs: IO port probe 0xa00-0xaff: clean. <6>cs: IO port probe 0x100-0x3af: clean. <6>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 <6>cs: IO port probe 0x820-0x8ff: clean. <6>cs: IO port probe 0xc00-0xcf7: clean. <6>cs: IO port probe 0xa00-0xaff: clean. <6>Adding 1052248k swap on /dev/hda3. Priority:-1 extents:1 across:1052248k <7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f000012319a] <6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>loop: loaded (max 8 devices) <5>ReiserFS: hda5: found reiserfs format "3.6" with standard journal <5>ReiserFS: hda5: using ordered data mode <4>reiserfs: using flush barriers <5>ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: hda5: checking transaction log (hda5) <5>ReiserFS: hda5: Using r5 hash to sort names <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda6, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <3>FAT: bogus number of reserved sectors <6>VFS: Can't find a valid FAT filesystem on dev hda1. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda8, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda10, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <4>fuse init (API version 7.8) Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Wed Sep 12 08:18:14 2007 preping boot/02-devfunctions.sh running boot/02-devfunctions.sh preping boot/03-block.sh running boot/03-block.sh preping boot/04-udev.sh running boot/04-udev.sh Creating device nodes with udev preping boot/05-blogd.sh running boot/05-blogd.sh preping boot/05-usb.sh running boot/05-usb.sh preping boot/08-shell.sh running boot/08-shell.sh preping boot/11-devinit_done.sh running boot/11-devinit_done.sh preping boot/170-storage.sh running boot/170-storage.sh preping boot/18-kdump.sh running boot/18-kdump.sh preping boot/18-resume.userspace.sh running boot/18-resume.userspace.sh Trying manual resume from /dev/hda3 Invoking userspace resume from /dev/hda3 resume: Could not stat configuration file resume: libgcrypt version: 1.2.4 preping boot/19-resume.kernel.sh running boot/19-resume.kernel.sh Trying manual resume from /dev/hda3 Invoking in-kernel resume from /dev/hda3 preping boot/20-mount.sh running boot/20-mount.sh Waiting for device /dev/hda2 to appear: ok fsck 1.40 (29-Jun-2007) [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/hda2 root (/dev/hda2): clean, 16933/705408 files, 331190/1409703 blocks fsck succeeded. Mounting root device read-write. Mounting root /dev/hda2 preping boot/21-createfb.sh running boot/21-createfb.sh preping boot/22-remount.sh running boot/22-remount.sh preping boot/23-killblogd.sh running boot/23-killblogd.sh preping boot/25-killudev.sh running boot/25-killudev.sh preping boot/27-killblogd2.sh running boot/27-killblogd2.sh Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed Sep 12 08:18:19 2007 done Starting udevd done Loading required kernel modules doneActivating swap-devices in /etc/fstab... donemount: according to mtab, /dev/hda2 is already mounted on / Activating device mapper... done Starting MD Raid done Waiting for udev to settle... Scanning for LVM volume groups... Reading all physical volumes. This may take a while... No volume groups found No volume groups found Activating LVM volume groups... No volume groups found done Waiting for usbfs . no more events Checking file systems... fsck 1.40 (29-Jun-2007) Reiserfs super block in block 16 on 0x305 of format 3.6 with standard journal Blocks (total/free): 574304/69614 by 4096 bytes Filesystem is clean Replaying journal: Replaying journal: Done. Reiserfs journal '/dev/hda5' in blocks [18..8211]: 0 transactions replayed Checking internal tree.. ^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^Hfinished tmp (/dev/hda6): clean, 5103/259032 files, 216162/1052226 blocks /dev/hda8: clean, 30524/263296 files, 167456/526120 blocks /dev/hda10: clean, 226565/919296 files, 1394201/1835008 blocks donedone Mounting local file systems... proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hda5 on /home type reiserfs (rw) /dev/hda6 on /tmp type ext3 (rw) usbfs on /proc/bus/usb type usbfs (rw) mount: wrong fs type, bad option, bad superblock on /dev/hda1, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so /dev/hda8 on /opt type ext3 (rw) /dev/hda7 on /home/dateien type vfat (rw,noexec,nosuid,nodev,gid=100,umask=000,utf8=true) /dev/hda9 on /home/musik type vfat (rw,noexec,nosuid,nodev,gid=100,umask=000,utf8=true) /dev/hda10 on /usr type ext3 (rw) failedSetting up the hardware clock<notice>killproc: kill(1068,29) done Loading fuse module done Mounting fuse control filesystemdone Creating /var/log/boot.msg doneSetting up hostname 'linux-6ols'done Setting up loopback interface lo lo IP address: 127.0.0.1/8 done Retry device configurationdone Setting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 fs.inotify.max_user_watches = 65536 done Patching video bios Intel 800/900 Series VBIOS Hack : version 0.5.3 Chipset: 855GM BIOS: TYPE 2 Mode Table Offset: $C0000 + $36f Mode Table Entries: 21 Patch mode 3c to resolution 1400x1050 complete done Activating remaining swap-devices in /etc/fstab... doneEnabling syn flood protectiondone Disabling IP forwardingdone done System Boot Control: The system has been set up System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(1068,3) INIT: Boot logging started on /dev/tty1(/dev/console) at Wed Sep 12 08:18:33 2007 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Entering runlevel: 5 <notice> ], [startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng use_usb=1 opt=-o rw -t ext3 CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 key=splash resumedev=/dev/hda3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 fbtype= read_write=1 devflags=0 udev_timeout=30 value=silent LC_ALL=POSIX fbnum= cmd_splash=silent file=boot/99-boot.sh INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=/etc/syslog-ng/syslog-ng.conf fsckopts=-V -a -C PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 SPLASHCFG= rootfstype=ext3 resume=/dev/hda3 PWD=/ block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 LINES=25 i=/sbin/init SHLVL=2 HOME=/ o=splash=silent p= rootfsck=/sbin/fsck.ext3 SPLASH=no splash=silent blogd_pid=431 cmd_root=/dev/hda2 modules= fsoptions=acl,user_xattr resume_mode=1 ROOTFS_BLKDEV=/dev/hda2 cmd_resume=/dev/hda3 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/sbin/syslog-ng ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ use_usb=1 opt=-o rw -t ext3 CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 key=splash resumedev=/dev/hda3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 fbtype= read_write=1 devflags=0 udev_timeout=30 value=silent LC_ALL=POSIX fbnum= cmd_splash=silent file=boot/99-boot.sh INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=/etc/syslog-ng/syslog-ng.conf fsckopts=-V -a -C PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 SPLASHCFG= rootfstype=ext3 resume=/dev/hda3 PWD=/ block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 LINES=25 i=/sbin/init SHLVL=2 HOME=/ o=splash=silent p= rootfsck=/sbin/fsck.ext3 SPLASH=no splash=silent blogd_pid=431 cmd_root=/dev/hda2 modules= fsoptions=acl,user_xattr resume_mode=1 ROOTFS_BLKDEV=/dev/hda2 cmd_resume=/dev/hda3 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/sbin/klogd ] Starting syslog services.done <notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/bin:/sbin:/usr/bin:/usr/sbin fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/sbin/resmgrd ] Starting resource managerdone <notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ use_usb=1 opt=-o rw -t ext3 CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 key=splash resumedev=/dev/hda3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 fbtype= read_write=1 devflags=0 udev_timeout=30 value=silent fbnum= cmd_splash=silent file=boot/99-boot.sh INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init KDEROOTHOME=/root/.kdm condition= REDIRECT=/dev/tty1 COLUMNS=80 config=/etc/syslog-ng/syslog-ng.conf fsckopts=-V -a -C PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 SPLASHCFG= rootfstype=ext3 resume=/dev/hda3 PWD=/ LANG=de_DE.UTF-8 block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 LINES=25 i=/sbin/init QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ o=splash=silent XCURSOR_THEME=crystalwhite p= WINDOWMANAGER=/usr/bin/kde rootfsck=/sbin/fsck.ext3 SPLASH=no splash=silent blogd_pid=431 cmd_root=/dev/hda2 modules= fsoptions=acl,user_xattr resume_mode=1 ROOTFS_BLKDEV=/dev/hda2 cmd_resume=/dev/hda3 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] Starting service kdmdone <notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/bin:/sbin:/usr/bin:/usr/sbin fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ] Starting D-Bus daemondone acpid: loading ACPI modules ( ac battery button processor thermal ) done acpid: will not skip unsupported modules acpid: loading ACPI laptop modules ( ) failed Starting acpid <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/bin:/sbin:/usr/bin:/usr/sbin fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/sbin/acpid ] done Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. done <notice>startproc: execve (/usr/sbin/polkitd) [ /usr/sbin/polkitd ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/bin:/sbin:/usr/bin:/usr/sbin fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/usr/sbin/polkitd ] Starting PolicyKit daemondone Starting HAL daemon<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/bin:/sbin:/usr/bin:/usr/sbin fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/usr/sbin/hald ] done Loading CPUFreq modulesdone <notice>startproc: execve (/usr/sbin/dhcdbd) [ /usr/sbin/dhcdbd --system ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent OLDPWD=/etc/sysconfig/network LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/usr/sbin/dhcdbd ] <notice>startproc: execve (/usr/sbin/NetworkManagerDispatcher) [ /usr/sbin/NetworkManagerDispatcher ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent OLDPWD=/etc/sysconfig/network LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/usr/sbin/NetworkManagerDispatcher ] <notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent OLDPWD=/etc/sysconfig/network LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ] Starting the DHCP DBUS Daemondone Starting the NetworkManagerDispatcherdone Starting the NetworkManagerdone <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/bin:/sbin:/usr/bin:/usr/sbin fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/sbin/portmap ] Starting RPC portmap daemondone Starting Samba NMB daemon <notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D -s /etc/samba/smb.conf ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/bin:/sbin:/usr/bin:/usr/sbin fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/usr/sbin/nmbd ] done Mount CIFS File Systems unused <notice>checkproc: /opt/kde3/bin/kdm 2178 Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz doneLoading compose table latin1.adddone Start Unicode mode doneLoading console font lat9w-16.psfu -m trivial G0:loadable done<notice>checkproc: /opt/kde3/bin/kdm 2178 <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/bin:/sbin:/usr/bin:/usr/sbin fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/sbin/auditd ] Starting auditd done Starting automount <notice>startproc: execve (/usr/sbin/automount) [ /usr/sbin/automount ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/sbin:/usr/sbin:/bin:/usr/bin fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/usr/sbin/automount ] done <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/bin:/sbin:/usr/bin:/usr/sbin fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] Starting cupsddone Starting hotkey-setup done Starting irqbalance unused Starting jexec services<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/bin:/sbin:/usr/bin:/usr/sbin fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting Name Service Cache Daemon/usr/sbin/nscd: relocation error: /usr/sbin/nscd: symbol __nss_services_lookup, version GLIBC_PRIVATE not defined in file libc.so.6 with link time reference startproc: exit status of parent of /usr/sbin/nscd: 127 failed Starting mail service (Postfix)done <notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/bin:/sbin:/usr/bin:/usr/sbin fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/usr/sbin/cron ] Starting CRON daemondone <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ] Starting powersaved: done Initializing random number generatordone <notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 TMPDIR=/var/tmp read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent LC_ALL= fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/bin:/sbin:/usr/bin:/usr/sbin fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= LANG=de_DE.UTF-8 block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 LC_CTYPE= splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/usr/sbin/smbd ] Starting Samba SMB daemon done <notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/bin:/sbin:/usr/bin:/usr/sbin fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/usr/sbin/smpppd ] Starting SMPPPDdone Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/bin:/sbin:/usr/bin:/usr/sbin fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/usr/sbin/sshd ] done <notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ use_usb=1 CONSOLE=/dev/console opt=-o rw -t ext3 key=splash ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux resumedev=/dev/hda3 ROOTFS_FSCK=0 read_write=1 fbtype= udev_timeout=30 devflags=0 value=silent LC_ALL=POSIX fbnum= file=boot/99-boot.sh cmd_splash=silent INIT_VERSION=sysvinit-2.86 current_day=20070912 rootdev=/dev/hda2 init=/sbin/init condition= REDIRECT=/dev/tty1 COLUMNS=80 config=config/boot.sh PATH=/bin:/sbin:/usr/bin:/usr/sbin fsckopts=-V -a -C RUNLEVEL=5 PWD=/ resume=/dev/hda3 rootfstype=ext3 SPLASHCFG= block_modules=pci:v00008086d000024CAsv00001025sd00000035bc01sc01i8a ide-disk PREVLEVEL=N root=/dev/hda2 i=/sbin/init LINES=25 HOME=/ SHLVL=2 o=splash=silent p= rootfsck=/sbin/fsck.ext3 splash=silent SPLASH=no blogd_pid=431 cmd_root=/dev/hda2 modules= resume_mode=1 fsoptions=acl,user_xattr cmd_resume=/dev/hda3 ROOTFS_BLKDEV=/dev/hda2 devnumber=() { set -- $(ls -lL $1); mkdevn ${5%,} $6 } discover_kernel_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devmajor=() { local devn=$(($1 / 256)); echo $(( $devn % 4096 )) } mkdevn=() { local major=$1 minor=$2 minorhi minorlo; major=$(($major * 256)); minorhi=$(($minor / 256)); minorlo=$(($minor % 256)); minor=$(($minorhi * 256 * 4096)); echo $(( $minorlo + $major + $minor )) } udev_discover_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ -z "$resumedev" ]; then return; fi; if [ "$resume_mode" != "off" ]; then if [ -e $resumedev ]; then devn=$(devnumber $resumedev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$major" -a -n "$minor" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; echo "Invoking in-kernel resume from $resumedev"; echo "$major:$minor" > /sys/power/resume; else echo "resume device $resumedev not found (ignoring)"; fi; fi } devminor=() { local devn=${1:-0}; echo $(( $devn % 256 )) } scsi_mod_check_compat=() { p="$(get_param $1)"; if [ "$p" ]; then echo "scsi_mod compat: Please use prefix: scsi_mod.$p"; add_module_param scsi_mod $p; fi } udev_discover_root=() { local root devn; case "$rootdev" in *:/*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $rootdev; then devn=$(devnumber $rootdev); fi; if [ -n "$devn" ]; then return 0; else return 1; fi } udev_check_for_device=() { local root; local retval=1; local timeout=$udev_timeout; root=$1; if [ -n "$root" ]; then echo -n "Waiting for device $root to appear: "; while [ $timeout -gt 0 ]; do if [ -e $root ]; then echo " ok"; retval=0; break; fi; sleep 1; echo -n "."; timeout=$(( $timeout - 1 )); done; fi; return $retval } udev_discover_dump=() { local root; case "$dumpdev" in *:*) root= ;; /dev/nfs) root= ;; /dev/*) root=${rootdev#/dev/} ;; esac; if [ -z "$root" ]; then return 0; fi; if udev_check_for_device $dumpdev; then devn=$(devnumber $rootdev); major=$(devmajor $devn); minor=$(devminor $devn); fi; if [ -n "$devn" ]; then echo "rootfs: major=$major minor=$minor" "devn=$devn"; echo $devn > /proc/sys/kernel/real-root-dev; return 0; else return 1; fi } discover_user_resume=() { local resume devn major minor; if [ ! -f /sys/power/resume ]; then return; fi; if [ ! -e "$resumedev" ]; then echo "resume device $resumedev not found (ignoring)"; return; fi; if [ "$resume_mode" != "off" ]; then if [ -x /sbin/resume ]; then echo "Invoking userspace resume from $resumedev"; /sbin/resume $resumedev; fi; fi } _=/sbin/startproc DAEMON=/usr/sbin/xinetd ] Starting INET services. (xinetd)done Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. SuSEfirewall2: Error: eth0 already in zone 'ext' but also configured for 'ext' SuSEfirewall2: Error: eth1 already in zone 'ext' but also configured for 'ext' done done Master Resource Control: runlevel 5 has been reached Failed services in runlevel 5: acpid nscd Skipped services in runlevel 5: smbfs irq_balancer splash <notice>killproc: kill(2094,3)