Hallo !!
Also, hier noch mal alle Daten die weiterhelfen sollten:
Hier die Daten....
Fdisk -l ergab:
Disk /dev/hdd: 255 heads, 63 sectors, 5005 cylinders /*Wechselrahmen
Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hdd1 2 5005 40194630 f Win95 Ext'd (LBA)
/dev/hdd5 2 2551 20482843+ b Win95 FAT32
/dev/hdd6 2552 2679 1028128+ 82 Linux swap /* Hier die beiden Linux
Partitionen auf dem Wechselrahmen
/dev/hdd7 2680 5005 18683563+ 83 Linux
Disk /dev/hda: 255 heads, 63 sectors, 4867 cylinders /* Die eigentlich
Festplatte mit Windows C: (Boot)
Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hda1 2 2001 16065000 f Win95 Ext'd (LBA)
/dev/hda2 * 2002 4867 23021145 7 HPFS/NTFS
/dev/hda5 2 2001 16064968+ 7 HPFS/NTFS
Die obere Platte ist eigentlich der Wechselrahmen.
Habe da eigentlich nur 1. Win-Partition und 2 für Linux !!
So sieht das in Windows aus:
www.christian-riekenberg.de/tools/platten.jpg
Hier nun die lilo.conf:
boot = /dev/hdd7
change-rules
reset
read-only
menu-scheme = Wg:kw:Wg:Wg
lba32
prompt
timeout = 80
message = /boot/message
image = /boot/vmlinuz
label = linux
root = /dev/hdd7
vga = 791
initrd = /boot/initrd
append = " hdc=ide-scsi"
image = /boot/vmlinuz.suse
label = failsafe
root = /dev/hdd7
vga = 791
initrd = /boot/initrd.suse
append = "ide=nodma apm=off acpi=off hdc=ide-scsi"
optional
other = /dev/hda2
label = windows
image = /boot/memtest.bin
label = memtest86
Und zum Schluss der Inhalt der Boot.msg
Cannot find map file.
Loaded 258 symbols from 13 modules.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.18-4GB (root@Pentium.suse.de) (gcc version 2.95.3
20010315 (SuSE)) #1 Wed Mar 27 13:57:05 UTC 2002
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
<4> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
<4> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<4>Scanning bios EBDA for MXT signature
<4>On node 0 totalpages: 131056
<4>zone(0): 4096 pages.
<4>zone(1): 126960 pages.
<4>zone(2): 0 pages.
<4>Building zonelist for node : 0
<4>Kernel command line: initrd=initrd ramdisk_size=65536 rescue=1
BOOT_IMAGE=linux SuSE=,1207300200,ADCA5F1C., vga=0x0317 expert=0
<6>Initializing CPU#0
<4>Detected 1668.728 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 3329.22 BogoMIPS
<4>Memory: 509280k/524224k available (1389k kernel code, 14556k reserved,
406k data, 120k init, 0k highmem)
<4>Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
<7>CPU: Before vendor init, caps: 0383f9ff c1c3f9ff 00000000, vendor = 2
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<7>CPU: After vendor init, caps: 0383f9ff c1c3f9ff 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0383f9ff c1c3f9ff 00000000 00000000
<7>CPU: Common caps: 0383f9ff c1c3f9ff 00000000 00000000
<4>CPU: AMD Athlon(tm) XP 2000+ stepping 02
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<4>PCI: PCI BIOS revision 2.10 entry at 0xfb470, last bus=1
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<3>Unknown bridge resource 0: assuming transparent
<6>PCI: Using IRQ router default [1106/3099] at 00:00.0
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
<4>mxt_scan_bios: enter
<4>Starting kswapd
<4>kinoded started
<5>VFS: Diskquotas version dquot_6.5.0 initialized
<5>ACPI: APM is already active, exiting
<6>vesafb: framebuffer at 0xe2000000, mapped to 0xe080d000, size 32768k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=0
<6>vesafb: protected mode interface info at c000:0336
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>Looking for splash picture..... found (1024x768, 42648 bytes).
<4>Console: switching to colour frame buffer device 105x34
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI SERIAL_ACPI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<4>block: 128 slots per queue, batch=32
<4>RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<4>VP_IDE: IDE controller on PCI bus 00 dev 89
<4>PCI: No IRQ known for interrupt pin A of device 00:11.1. Please try using
pci=biosirq.
<4>VP_IDE: chipset revision 6
<4>VP_IDE: not 100%% native mode: will probe irqs later
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<6>VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
<4> ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hdaMA, hdbMA
<4> ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdcMA, hddMA
<4>hda: MAXTOR 4K040H2, ATA DISK drive
<4>hdb: TOSHIBA DVD-ROM SD-M1502, ATAPI CD/DVD-ROM drive
<4>hdc: AOPEN CD-RW CRW2040, ATAPI CD/DVD-ROM drive
<4>hdd: IC35L040AVER07-0, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>blk: queue c031ece4, I/O limit 4095Mb (mask 0xffffffff)
<4>hda: safely enabled flush
<6>hda: 78198750 sectors (40038 MB) w/2000KiB Cache, CHS=4867/255/63,
UDMA(100)
<4>blk: queue c031f1a4, I/O limit 4095Mb (mask 0xffffffff)
<4>hdd: safely enabled flush
<6>hdd: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63,
UDMA(100)
<4>hdb: no flushcache support
<4>hdb: ATAPI 48X DVD-ROM drive, 128kB Cache
<6>Uniform CD-ROM driver Revision: 3.12
<4>hdc: no flushcache support
<4>hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
<4>ide-floppy driver 0.99
<6>Partition check:
<6> hda: hda1 < hda5 > hda2
<6> hdd: [PTBL] [5005/255/63] hdd1 < hdd5 hdd6 hdd7 >
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>loop: loaded (max 16 devices)
<6>Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
<6>Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
<4>ide-floppy driver 0.99
<6>SCSI subsystem driver Revision: 1.00
<3>request_module[scsi_hostadapter]: Root fs not mounted
<3>request_module[scsi_hostadapter]: Root fs not mounted
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>IP: routing cache hash table of 4096 buckets, 32Kbytes
<4>TCP: Hash tables configured (established 32768 bind 32768)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<4>Uncompressing.........................................done.
<4>Freeing initrd memory: 4044k freed
<4>VFS: Mounted root (minix filesystem).
<7>VFS: Disk change detected on device ide0(3,64)
<6>cdrom: open failed.
<7>VFS: Disk change detected on device ide1(22,0)
<6>Non-volatile memory driver v1.1
<7>VFS: Disk change detected on device fd(2,0)
<4>end_request: I/O error, dev 02:00 (floppy), sector 0
<7>VFS: Disk change detected on device fd(2,0)
<4>end_request: I/O error, dev 02:00 (floppy), sector 0
<6>cdrom: open failed.
<7>VFS: Disk change detected on device ide1(22,0)
<6>usb.c: registered new driver usbdevfs
<6>usb.c: registered new driver hub
<6>usb-uhci.c: $Revision: 1.275 $ time 14:22:01 Mar 27 2002
<6>usb-uhci.c: High bandwidth mode enabled
<6>usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 10
<4>usb-uhci.c: Detected 2 ports
<6>usb.c: new USB bus registered, assigned bus number 1
<6>hub.c: USB hub found
<6>hub.c: 2 ports detected
<6>usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 10
<4>usb-uhci.c: Detected 2 ports
<6>usb.c: new USB bus registered, assigned bus number 2
<6>hub.c: USB hub found
<6>hub.c: 2 ports detected
<6>usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 10
<4>usb-uhci.c: Detected 2 ports
<6>usb.c: new USB bus registered, assigned bus number 3
<6>hub.c: USB hub found
<6>hub.c: 2 ports detected
<6>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
<6>usb.c: registered new driver hiddev
<6>usb.c: registered new driver hid
<6>hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik