On Wed, 08 Jun 2011, 22:55:42 +0200, Andreas Meyer wrote:
Manfred Hollstein
schrieb am Wed, 8 Jun 2011 19:39:09 +0200: [...] Mach' mal ein
hdparm -B 255 /dev/sda
# hdparm -B 255 /dev/sda
/dev/sda: setting Advanced Power Management level to disabled APM_level = off
Und wie kann ich es wieder einschalten?
Steht in "man hdparm" beschrieben; gueltige Werte sind 1-254, wobei 1-127 fuer aggressiveres Verhalten inklusive Spin-Down stehen und 128 bis 254 fuer solches eben ohne Spin-Down.
Damit ist dieses "Stromsparfeature" zwar aus, aber die Platte sollte damit auch laenger leben.
Was meint G-Sense_Error_Rate?
Wird bei den Platten vornehmlich fuer transportable Rechner genutzt als Indikator, wie oft du den Rechner schon hast fallen lassen... ;-)
Das ist der Nachteil von diesen miniITX-Gehäusen. Die stehen auf dem Schreibtisch und wenn man mal dranrempelt, bekommt auch der Computer den Stoß ab.
Tatsaechlich sind die "raw" Werte Hersteller-spezifisch, und nicht jeder Hersteller dokumentiert, was die tatsaechlich bedeuten.
Ich log beobachte ich auch folgendes:
itx:/home/andreas # tail -f /var/log/messages Jun 8 22:23:32 itx kernel: [ 710.000220] ata1: soft resetting link Jun 8 22:23:32 itx kernel: [ 710.194106] ata1.00: NODEV after polling detection Jun 8 22:23:32 itx kernel: [ 710.194122] ata1.00: revalidation failed (errno=-2) Jun 8 22:23:37 itx kernel: [ 715.151052] ata1: soft resetting link Jun 8 22:23:38 itx kernel: [ 715.396094] ata1.00: NODEV after polling detection Jun 8 22:23:38 itx kernel: [ 715.396110] ata1.00: revalidation failed (errno=-2) Jun 8 22:23:42 itx kernel: [ 720.353056] ata1: soft resetting link Jun 8 22:23:43 itx kernel: [ 720.556367] ata1.00: configured for UDMA/33 Jun 8 22:23:43 itx kernel: [ 720.561396] ata1.01: configured for UDMA/133 Jun 8 22:23:43 itx kernel: [ 720.562971] ata1: EH complete Jun 8 22:24:17 itx kernel: [ 755.000100] ata1.00: limiting speed to PIO4 Jun 8 22:24:17 itx kernel: [ 755.000120] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jun 8 22:24:17 itx kernel: [ 755.000133] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Jun 8 22:24:17 itx kernel: [ 755.000177] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Jun 8 22:24:17 itx kernel: [ 755.000182] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) Jun 8 22:24:17 itx kernel: [ 755.000195] ata1.00: status: { DRDY } Jun 8 22:24:17 itx kernel: [ 755.051059] ata1: soft resetting link Jun 8 22:24:17 itx kernel: [ 755.229077] ata1.00: NODEV after polling detection Jun 8 22:24:17 itx kernel: [ 755.229091] ata1.00: revalidation failed (errno=-2) Jun 8 22:24:22 itx kernel: [ 760.205052] ata1: soft resetting link Jun 8 22:24:23 itx kernel: [ 760.408361] ata1.00: configured for PIO4 Jun 8 22:24:23 itx kernel: [ 760.413223] ata1.01: configured for UDMA/133 Jun 8 22:24:23 itx kernel: [ 760.414792] ata1: EH complete Jun 8 22:24:34 itx kernel: [ 771.358218] ata1.00: qc timeout (cmd 0xa0) Jun 8 22:24:34 itx kernel: [ 771.358248] ata1.00: limiting speed to PIO3 Jun 8 22:24:34 itx kernel: [ 771.358265] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jun 8 22:24:34 itx kernel: [ 771.358279] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Jun 8 22:24:34 itx kernel: [ 771.358323] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Jun 8 22:24:34 itx kernel: [ 771.358329] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) Jun 8 22:24:34 itx kernel: [ 771.358342] ata1.00: status: { DRDY ERR } Jun 8 22:24:34 itx kernel: [ 771.358368] ata1: soft resetting link Jun 8 22:24:34 itx kernel: [ 771.574358] ata1.00: configured for PIO3 Jun 8 22:24:34 itx kernel: [ 771.579206] ata1.01: configured for UDMA/133 Jun 8 22:24:34 itx kernel: [ 771.583096] ata1: EH complete Jun 8 22:24:39 itx kernel: [ 776.588065] ata1.00: qc timeout (cmd 0xa0) Jun 8 22:24:39 itx kernel: [ 776.588097] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Ich vermute, dass bedeutet nichts gutes ...
Kommst du an die Stecker/Kabel 'ran? Versuch' mal, entweder die Stecker am SATA-Kabel der Platte zu ziehen und wieder korrekt zu stecken; ggfs. tauscht die das Kabel auch mal ganz aus. Ich habe schon oft solche Situationen mit Kabelwacklern gehabt... HTH, cheers. l8er manfred -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org