Hallo Florian, Am Dienstag, 23. Juli 2002 21:12 schrieb Florian Gross:
* Samuel Edlmeier
textete am 22.07.02:
Hmmm, mehr steht da nicht dazu drin? (Ich komemntiere mal ein wenig)
Jul 21 22:57:46 samuel kernel: 8139cp: pci dev 00:0f.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
Hat zwar nichts damit zu tun, aber gehen bei dir PCI- Karten?
Ja, NW-Karten die laufen tadellos, der Kernel meldet schließlich "try the 8139too driver instead"
Jul 21 23:02:16 samuel kernel: end_request: I/O error, dev 02:00 (floppy), sector 0
Kaputte Diskette... dürfte auch nichts damit zu tun haben. ;-)
stimmt, die Diskette ist kaputt
Jul 21 23:04:53 samuel pppd[333]: Couldn't release PPP unit: Inappropriate ioctl for device
PPP streßt auch rum.
Ja, das stresst seit Kernel 2.4.18. Trotzdem funktioniert die DSL-Connection tadellos. Stört mich somit nicht weiter ;)
Jul 21 23:04:57 samuel kdm[1030]: fatal IO error 32 (Broken pipe)
KDM schmiert ab und
Mit Absicht strg-alt-bspace, um den Lost-Interrupt Fehler zu erzwingen
Jul 21 23:04:59 samuel kernel: hda: DMA disabled Jul 21 23:04:59 samuel kernel: hdb: DMA disabled
Und diese zwei Zeilen sind alles dazu?
Ja, mehr steht nicht im Logfile.
Was ich meinte, war etwas in der Art wie
Mar 27 04:30:11 florian kernel: hda: irq timeout: status=0xd0 { Busy } Mar 27 04:30:11 florian kernel: hda: status timeout: status=0xd0 { Busy } Mar 27 04:30:11 florian kernel: hda: DMA disabled Mar 27 04:30:11 florian kernel: hda: drive not ready for command Mar 27 04:30:12 florian kernel: ide0: reset: success Mar 27 04:32:14 florian kernel: hdc: irq timeout: status=0xd0 { Busy } Mar 27 04:34:08 florian kernel: hdc: status timeout: status=0xd0 { Busy } Mar 27 04:34:08 florian kernel: hdc: drive not ready for command
Oder:
Jul 2 04:32:43 florian kernel: hda: timeout waiting for DMA Jul 2 04:32:43 florian kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14 Jul 2 04:32:43 florian kernel: hda: read_intr: status=0x51 { DriveReady SeekComplete Error } Jul 2 04:32:43 florian kernel: hda: read_intr: error=0x04 { DriveStatusError } Jul 2 04:32:43 florian kernel: hda: read_intr: status=0x51 { DriveReady SeekComplete Error } Jul 2 04:32:43 florian kernel: hda: read_intr: error=0x04 { DriveStatusError } Jul 2 04:32:43 florian kernel: hda: read_intr: status=0x51 { DriveReady SeekComplete Error } Jul 2 04:32:43 florian kernel: hda: read_intr: error=0x04 { DriveStatusError } Jul 2 04:32:43 florian kernel: hda: read_intr: status=0x51 { DriveReady SeekComplete Error } Jul 2 04:32:43 florian kernel: hda: read_intr: error=0x04 { DriveStatusError } Jul 2 04:32:43 florian kernel: hdb: DMA disabled Jul 2 04:32:43 florian kernel: ide0: reset: success Jul 2 04:34:18 florian kernel: hdd: dma_intr: status=0xff { Busy } Jul 2 04:34:18 florian kernel: hdc: DMA disabled Jul 2 04:34:18 florian kernel: hdd: DMA disabled Jul 2 04:34:22 florian kernel: ide1: reset: success Jul 2 04:34:38 florian kernel: hda: timeout waiting for DMA Jul 2 04:34:38 florian kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14 Jul 8 18:21:09 florian kernel: hdd: irq timeout: status=0xff { Busy } Jul 8 18:21:09 florian kernel: ide1: reset: success [...] Jul 9 04:50:42 florian kernel: hdd: irq timeout: status=0xff { Busy } Jul 9 04:50:42 florian kernel: ide1: reset: success
Außer das DMA ausgeschaltet wurde, finde ich nichts zu deinem Problem.
Problem bereits gelöst (siehe "IDE-Probleme -DIE LÖSUNG"!), vielen Dank nochmals!
cu flo
bg, sam