Liebe Liste,
nach wie vor streikt meine Soundkarte (siehe bisherige Mails). Keine Fehlermeldungen, außer beim Versuch, etwas abzuspielen. Der Treiber installiert sich scheinbar ohne Probleme. Ich wurde gebeten die Datei /proc/asound/sndstat bzw. /dev/sndstat zu schicken.
Könnte es noch an etwas anderen liegen??
Hm, wird schon komisch. Kannst du mal den Inhalt der proc-datei /proc/asound/sndstat schicken? Oder /dev/sndstat, falls die erste nicht klappt.
und bitte ausschliesslich an die Liste schreiben, das vergroessert die Moeglichkeit, das dein Problem geloest wird.
Peter
/proc/asound/sndstat gibt es auf meinem System nicht, dafür die andere. Hier der Inhalt:
OSS/Free: 0x30802 Load type: Driver loaded as a module Kernel: Linux linux 2.4.10-4GB #1 Mon Nov 5 11:31:45 GMT 2001 i686 Config options: 0
Installed drivers: Type 0: Aureal Vortex
Card config: (AU8820 at 0xd5000000 irq 10)
Audio devices: 0: AU8820 (DUPLEX)
Synth devices: Not supported by current driver
Midi devices: 0: AU8820
Timers: 0: System Clock
Mixers: 0: AU8820
Scheinbar alles in Ordnung, oder? Jedenfalls macht die Soundkarte keinen Mucks...
Habt ihr noch eine Idee? Vielen Dank.
Grüße von Günter
-- GMX - Die Kommunikationsplattform im Internet. http://www.gmx.net
-- Um die Liste abzubestellen, schicken Sie eine Mail an: suse-linux-unsubscribe@suse.com Um eine Liste aller verfügbaren Kommandos zu bekommen, schicken Sie eine Mail an: suse-linux-help@suse.com
Liebe Liste, eventuell sind die Ausgaben der xconsole hilfreich: Console log for linux Jun 29 11:15:55 linux kernel: ip_tables: (c)2000 Netfilter core team Jun 29 11:15:55 linux kernel: ip_conntrack (3071 buckets, 24568 max) Jun 29 11:20:18 linux kernel: au88xx: Loading... Jun 29 11:20:18 linux kernel: au88xx: Found vortex PCI device: Jun 29 11:20:18 linux kernel: au88xx: id=0x0001 Jun 29 11:20:18 linux kernel: au88xx: bar0=0xd5000000 Jun 29 11:20:18 linux kernel: au88xx: irq=10 Jun 29 11:20:18 linux kernel: au88xx: mem 0xd5000000-0xd503ffff in use Jun 29 11:20:18 linux kernel: au88xx: Add device, audio=3, mixer=0, midi=2 Jun 29 11:20:18 linux kernel: au88xx: could not find device for minor = 128 Jun 29 11:20:18 linux kernel: au88xx: could not find device for minor = 128 Jun 29 11:20:18 linux modprobe: modprobe: Can't locate module sound-slot-1 Jun 29 11:20:18 linux modprobe: modprobe: Can't locate module sound-service-1-0 Jun 29 11:20:18 linux modprobe: modprobe: Can't locate module sound-slot-1 Jun 29 11:20:18 linux modprobe: modprobe: Can't locate module sound-service-1-0 Jun 29 11:20:19 linux kernel: au88xx: Could not find device for minor = 128 Jun 29 11:20:26 linux kernel: au88xx: could not find device for minor = 128 Jun 29 11:20:26 linux kernel: au88xx: could not find device for minor = 128 Jun 29 11:20:26 linux modprobe: modprobe: Can't locate module sound-slot-1 Jun 29 11:20:27 linux modprobe: modprobe: Can't locate module sound-service-1-0 Jun 29 11:20:27 linux modprobe: modprobe: Can't locate module sound-slot-1 Jun 29 11:20:27 linux modprobe: modprobe: Can't locate module sound-service-1-0 Jun 29 11:23:13 linux kernel: au88xx: Could not find device for minor = 128 Jun 29 11:23:24 linux kernel: au88xx: Could not find device for minor = 128 In dieser Art und Weise kommen die gleichen Meldungen immer wieder dazu... Vielen Dank für Eure Hilfe! Grüße von Günter Hier die bisherige Mail dazu: ich versuche meine Terratec Xlerate! PCI Soundkarte unter SuSE-Linux 7.3 (KDE 3.0.1. ist dazugekommen, der Rest ist Standardinstallation) zum Laufen zu bewegen. Ich folge der Anleitung der SDB. Bei der Installation seint es keine Probleme zu geben: linux:/home/guenter/Installationen/aureal # make install20 make install AUCHIP=AU8820 make[1]: Entering directory `/home/guenter/Installationen/aureal' cc -D__KERNEL__ -DMODULE -DAU8820 -mpentium -O6 -fomit-frame-pointer -Wall -pipe -I/usr/src/linux/include -c -o au_audio.o au_audio.c cc -D__KERNEL__ -DMODULE -DAU8820 -mpentium -O6 -fomit-frame-pointer -Wall -pipe -I/usr/src/linux/include -c -o au_midi.o au_midi.c cc -D__KERNEL__ -DMODULE -DAU8820 -mpentium -O6 -fomit-frame-pointer -Wall -pipe -I/usr/src/linux/include -c -o au_core.o au_core.c cc -D__KERNEL__ -DMODULE -DAU8820 -mpentium -O6 -fomit-frame-pointer -Wall -pipe -I/usr/src/linux/include -c -o au_sndstat.o au_sndstat.c cc -D__KERNEL__ -DMODULE -DAU8820 -mpentium -O6 -fomit-frame-pointer -Wall -pipe -I/usr/src/linux/include -c -o au_mixer.o au_mixer.c cc -D__KERNEL__ -DMODULE -DAU8820 -mpentium -O6 -fomit-frame-pointer -Wall -pipe -I/usr/src/linux/include -c -o au_utils.o au_utils.c cc -D__KERNEL__ -DMODULE -DAU8820 -mpentium -O6 -fomit-frame-pointer -Wall -pipe -I/usr/src/linux/include -c -o au_vortex.o au_vortex.c ld -m elf_i386 -r au_audio.o au_midi.o au_core.o au_sndstat.o au_mixer.o au_utils.o au_vortex.o asp20.o -o au8820.o mv -f /etc/modules.conf /etc/modules.conf.old gawk -f mod_conf /etc/modules.conf.old > /etc/modules.conf echo "alias sound au8820" >> /etc/modules.conf echo "alias midi au8820" >> /etc/modules.conf mkdir -p /lib/modules/2.4.10-4GB/misc cp -f au8820.o /lib/modules/2.4.10-4GB/misc /sbin/depmod -a /sbin/rmmod au8820 /sbin/modprobe au8820 make[1]: Leaving directory `/home/guenter/Installationen/aureal' linux:/home/guenter/Installationen/aureal # Schaue ich nach ob das Modul geladen wird: linux:/home/guenter/Installationen/aureal # lsmod Module Size Used by au8820 114816 0 (unused) nls_iso8859-1 2880 1 (autoclean) nls_cp437 4384 1 (autoclean) soundcore 3280 5 (autoclean) [au8820] parport_pc 19280 1 (autoclean) lp 5248 0 (autoclean) parport 22240 1 (autoclean) [parport_pc lp] ipv6 124736 -1 (autoclean) evdev 4160 0 (unused) input 3072 0 [evdev] uhci 22400 0 (unused) usbcore 47264 1 [uhci] iptable_nat 12656 0 (autoclean) (unused) ip_conntrack 12848 1 (autoclean) [iptable_nat] iptable_filter 1728 0 (autoclean) (unused) ip_tables 10496 4 [iptable_nat iptable_filter] hisax 472528 4 isdn 118480 6 [hisax] slhc 4432 1 [isdn] In der modules.conf habe ich natürlich das alias char-major-14 wegkommentiert. Trotzdem bleibt die Karte stumm... (Lautsprecher sind freilich an, Lautstärke an den Boxen ist hochgedreht, und die KArte funzt auch unter Windows). Was läuft da nicht richtig????? Könnt ihr mir helfen? Vielen Dank schon jetzt! Viele Grüße von Günter -- GMX - Die Kommunikationsplattform im Internet. http://www.gmx.net -- GMX - Die Kommunikationsplattform im Internet. http://www.gmx.net