Am Mittwoch, 7. Februar 2007 schrieb Martin Ereth:
Andreas Tallowitz schrieb: [...]
aber mein PC hat keine Datei oder Ordner mit /proc/bus/usb (usb Ordner fehlt)
Poste die Ausgabe von dmesg gleich nach einem Neustart! Martin
andreas@andreas-linux:~> su
Passwort:
andreas-linux:/home/andreas # dmesg
Bootdata ok (command line is root=/dev/sda2 vga=0x31a resume=/dev/sda1
splash=silent)
Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2
20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005dfd0000 (usable)
BIOS-e820: 000000005dfd0000 - 000000005dfde000 (ACPI data)
BIOS-e820: 000000005dfde000 - 000000005e000000 (ACPI NVS)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f7fe0
ACPI: RSDT (v001 A M I OEMRSDT 0x12000509 MSFT 0x00000097) @
0x000000005dfd0000
ACPI: FADT (v002 A M I OEMFACP 0x12000509 MSFT 0x00000097) @
0x000000005dfd0200
ACPI: MADT (v001 A M I OEMAPIC 0x12000509 MSFT 0x00000097) @
0x000000005dfd0390
ACPI: MCFG (v001 A M I OEMMCFG 0x12000509 MSFT 0x00000097) @
0x000000005dfd0400
ACPI: OEMB (v001 A M I AMI_OEM 0x12000509 MSFT 0x00000097) @
0x000000005dfde040
ACPI: HPET (v001 A M I OEMHPET 0x12000509 MSFT 0x00000097) @
0x000000005dfd40c0
ACPI: DSDT (v001 1ADCF 1ADCF001 0x00000001 INTL 0x02002026) @
0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-000000005dfd0000
Bootmem setup node 0 0000000000000000-000000005dfd0000
On node 0 totalpages: 378566
DMA zone: 2893 pages, LIFO batch:0
DMA32 zone: 375673 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x0 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 60000000 (gap: 5e000000:a0e00000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
Built 1 zonelists. Total pages: 378566
Kernel command line: root=/dev/sda2 vga=0x31a resume=/dev/sda1
splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 2654.306 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
Memory: 1507544k/1539904k available (1915k kernel code, 31972k reserved, 1278k
data, 188k init)
calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
Probably due to long platform interrupts. Consider using "lpj=" boot option.
Calibrating delay loop... 4587.52 BogoMIPS (lpj=9175040)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
checking if image is initramfs... it is
Freeing initrd memory: 3395k freed
ACPI: Core revision 20060707
..MP-BIOS bug: 8254 timer not connected to IO-APIC
Using local APIC timer interrupts.
result 8184320
Detected 8.184 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5308.02 BogoMIPS
(lpj=10616058)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Pentium(R) D CPU 2.66GHz stepping 07
Brought up 2 CPUs
testing NMI watchdog ... OK.
migration_cost=1613
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 3 of device 0000:00:00.0
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
hpet0: 4 32-bit timers, 14318180 Hz
PCI-GART: No AMD northbridge found.
PCI: Bridge: 0000:00:01.0
IO window: 5000-5fff
MEM window: ff200000-ff2fffff
PREFETCH window: cff00000-dfefffff
PCI: Bridge: 0000:00:14.4
IO window: 6000-6fff
MEM window: ff300000-ff3fffff
PREFETCH window: 60000000-600fffff
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1171095725.016:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000080000, using 10240k,
total 32768k
vesafb: mode is 1280x1024x16, linelength=2560, pages=11
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318
bytes,<6>...found (1280x1024, 59769 bytes, v3).
Console: switching to colour frame buffer device 156x60
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 188k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
libata version 2.00 loaded.
sata_sil 0000:00:11.0: version 2.0
GSI 16 sharing vector 0xB1 and IRQ 16
ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 177
ata1: SATA max UDMA/100 cmd 0xFFFFC2000001E880 ctl 0xFFFFC2000001E88A bmdma
0xFFFFC2000001E800 irq 177
ata2: SATA max UDMA/100 cmd 0xFFFFC2000001E8C0 ctl 0xFFFFC2000001E8CA bmdma
0xFFFFC2000001E808 irq 177
scsi0 : sata_sil
ata1: SATA link down (SStatus 0 SControl 310)
scsi1 : sata_sil
input: ImExPS/2 Logitech Wheel Mouse as /class/input/input2
ata2: SATA link down (SStatus 0 SControl 310)
GSI 17 sharing vector 0xB9 and IRQ 17
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 185
ata3: SATA max UDMA/100 cmd 0xFFFFC20000020C80 ctl 0xFFFFC20000020C8A bmdma
0xFFFFC20000020C00 irq 185
ata4: SATA max UDMA/100 cmd 0xFFFFC20000020CC0 ctl 0xFFFFC20000020CCA bmdma
0xFFFFC20000020C08 irq 185
scsi2 : sata_sil
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32)
ata3.00: ata3: dev 0 multi count 16
ata3.00: configured for UDMA/100
scsi3 : sata_sil
ata4: SATA link down (SStatus 0 SControl 310)
Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: Attached scsi disk sda
ATIIXP: IDE controller at PCI slot 0000:00:14.1
GSI 18 sharing vector 0xC1 and IRQ 18
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
ATIIXP: chipset revision 128
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
sd 2:0:0:0: Attached scsi generic sg0 type 0
hda: HL-DT-STDVD-RAM GSA-H20L, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Losing some ticks... checking if CPU frequency changed.
Probing IDE interface ide1...
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Attempting manual resume
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
Linux video capture interface: v2.00
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 193
usbcore: registered new driver usbfs
usbcore: registered new driver hub
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ieee1394: Initialized config rom entry `ip1394'
hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ALSA sound/pci/hda/hda_codec.c:2117: autoconfig: line_outs=4
(0x14/0x17/0x16/0x15/0x0)
ALSA sound/pci/hda/hda_codec.c:2121: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2123: hp=0x1b, dig_out=0x1e, din_in=0x0
ALSA sound/pci/hda/hda_codec.c:2131: inputs: mic=0x18, fmic=0x19,
line=0x1a, fline=0x0, cd=0x1c, aux=0x0
GSI 19 sharing vector 0xC9 and IRQ 19
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 201
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 201, io mem 0xff6fe000
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.18.2-34-default ohci_hcd
usb usb1: SerialNumber: 0000:00:13.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 201
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.1: irq 201, io mem 0xff6fd000
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.18.2-34-default ohci_hcd
usb usb2: SerialNumber: 0000:00:13.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 201
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: irq 201, io mem 0xff6fc000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd
usb usb3: SerialNumber: 0000:00:13.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
GSI 20 sharing vector 0xD1 and IRQ 20
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 209
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[209] MMIO=[ff3ff800-ff3fffff]
Max Packet=[2048] IR/IT contexts=[4/8]
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 23 (level, low) -> IRQ 177
eth0: RTL8169sb/8110sb at 0xffffc20000e58c00, 00:13:d3:ae:1c:88, IRQ 177
usb 3-2: new high speed USB device using ehci_hcd and address 2
usb 3-2: device descriptor read/all, error 0
usb 3-2: new high speed USB device using ehci_hcd and address 3
usb 3-2: unable to read config index 0 descriptor/all
usb 3-2: can't read configurations, error -71
usb 3-2: new high speed USB device using ehci_hcd and address 4
usb 3-2: device descriptor read/all, error -71
Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k
usb 3-2: new high speed USB device using ehci_hcd and address 5
usb 3-2: device descriptor read/8, error 0
usb 3-2: device descriptor read/8, error -71
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000cbde52]
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
dm-devel@redhat.com
loop: loaded (max 8 devices)
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
AppArmor: AppArmor initialized
audit(1171095748.864:2): AppArmor initialized
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 288 bytes per conntrack
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: duty_cycle spans bit 4
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC]
(Node ffff810037fe7210), AE_BAD_HEADER
ACPI: duty_cycle spans bit 4
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC]
(Node ffff810037fe7ad0), AE_BAD_HEADER
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not
present [20060707]
ACPI: Getting cpuindex for acpiid 0x3
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not
present [20060707]
ACPI: Getting cpuindex for acpiid 0x4
r8169: eth0: link up
NET: Registered protocol family 17
audit(1171095767.220:3): audit_pid=3325 old=0 by auid=4294967295
IA-32 Microcode Update Driver: v1.14a