Nocheinmal mein Posting, diesmal aber mit attached Ausgabe von dmesg u. ifconfig. Vielleicht kann damit jemand was anfangen. Mit besten Grüssen, Thomas Fürle -- Thomas Fuerle <A HREF="mailto:fuerle@vipios.pri.univie.ac.at">mailto:fuerle@vipios.pri.univie.ac.at</A> <A HREF="http://vipios.pri.univie.ac.at"><A HREF="http://vipios.pri.univie.ac.at</A">http://vipios.pri.univie.ac.at Institute for Applied Computer Science and Information Systems University of Vienna, Rathausstr. 19/4, A-1010 Vienna, Austria Tel: +43 1 4277 38423 "Don't hate yourself in the morning -- sleep till noon." </PRE> -- BEGIN included message</EM></P> <BLOCKQUOTE> <UL> <LI>To</em>: <A HREF="mailto:suse-linux@suse.com">suse-linux@suse.com</A></LI> <LI>Subject</em>: 3Com574-TX</LI> <LI>From</em>: Thomas Fuerle <<A HREF="mailto:fuerle@vipios.pri.univie.ac.at">fuerle@vipios.pri.univie.ac.at</A>></LI> <LI>Date</em>: Wed, 01 Jul 1998 19:32:46 +0200</LI> </UL> <PRE> Hallo Hacker, habe mir gerade eine sündteure 3Com574-TX 100MBit PCMCIA Netzwerkarte gekauft. Obwohl sie in der Hardwareliste drin steht, funkt das Ding nicht (SuSE 5.2). +) Der Cardmanager lädt das Ding sauber. ifconfig eth0 zeigt alles sauber an IP-Adresse, Broadcast, usw. ping my_own_ip_adress funktioniert. -) ping alle_anderen stirbt. netstat -r bzw. route bleibt beim Gateway anzeigen hängen, sich auch ping alle_anderen. Die LED's auf der Karte als auch am Switch Lantronix LSM2F8-S leuchten beide grün (= 10MBit half duplex OK, warum nicht full duplex am Switch ?!?) tecke ich die gute alte 3C589C ins Notebook, fährt das Ding natürlich anstandslos mit 10MBit full duplex in die Höhe u. funktioniert sofort. Any ideas, Tom PS: Vielleicht kann man ja Optionen für diese Karte setzen wie z.B den Mode erzwingen, habe ich bei 100MBit Kingstion so gemacht, aber leider weiß ich nicht, wo ich über diese Optionen nachlesen könnte bzw. wie man sie einstellt (irgenwie mit conf.modules o. ä.) --- Thomas Fuerle <A HREF="mailto:fuerle@vipios.pri.univie.ac.at">mailto:fuerle@vipios.pri.univie.ac.at</A> <A HREF="http://vipios.pri.univie.ac.at"><A HREF="http://vipios.pri.univie.ac.at</A">http://vipios.pri.univie.ac.at Institute for Applied Computer Science and Information Systems University of Vienna, Rathausstr. 19/4, A-1010 Vienna, Austria Tel: +43 1 4277 38423 "Don't hate yourself in the morning -- sleep till noon." </PRE> </BLOCKQUOTE> -- END included message</EM></P> <PRE> Memory: sized by int13 088h Console: 16 point font, 400 scans Console: colour VGA+ 80x25, 1 virtual console (max 63) pci_init: no BIOS32 detected Calibrating delay loop.. ok - 35.94 BogoMIPS Memory: 38756k/40960k available (868k kernel code, 384k reserved, 952k data) Swansea University Computer Society NET3.035 for Linux 2.0 NET3: Unix domain sockets 0.13 for Linux NET3.035. G4KLX/GW4PTS AX.25 for Linux. Version 0.32 for Linux NET3.035 (Linux 2.0) G8BPQ Encapsulation of AX.25 frames enabled G4KLX NET/ROM for Linux. Version 0.5 for AX25.032 Linux 2.0 Swansea University Computer Society TCP/IP for NET3.034 IP Protocols: IGMP, ICMP, UDP, TCP Swansea University Computer Society IPX 0.34 for NET3.035 IPX Portions Copyright (c) 1995 Caldera, Inc. Appletalk 0.17 for Linux NET3.035 Checking 386/387 coupling... Ok, fpu using exception 16 error reporting. Checking 'hlt' instruction... Ok. Intel Pentium with F0 0F bug - workaround enabled. alias mapping IDT readonly ... ... done Linux version 2.0.33 (root@Mandelbrot.suse.de) (gcc version 2.7.2.1) #64 Wed Apr 22 10:17:11 MEST 1998 Starting kswapd v 1.4.2.2 Serial driver version 4.13 with no serial options enabled tty00 at 0x03f8 (irq = 4) is a 16550A tty01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.07 tpqic02: Runtime config, $Revision: 0.4.1.5 $, $Date: 1994/10/29 02:46:13 $ tpqic02: DMA buffers: 20 blocks, at address 0x216400 (0x2163dc) hda: TOSHIBA MK1301MAV, 1296MB w/128kB Cache, CHS=658/64/63 hdb: IBM-DBOA-2720, 689MB w/64kB Cache, CHS=700/32/63 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 FDC 0 is a National Semiconductor PC87306 md driver 0.35 MAX_MD_DEV=4, MAX_REAL=8 linear personality registered raid0 personality registered scsi : 0 hosts. scsi : detected total. Partition check: hda: hda1 hda2 hdb: hdb1 hdb2 VFS: Mounted root (ext2 filesystem) readonly. Adding Swap: 40316k swap-space (priority -1) Linux PCMCIA Card Services 3.0.0 kernel build: 2.0.33 #62 Sun Apr 19 15:53:49 MEST 1998 options: [cardbus] Intel PCIC probe: Cirrus PD672x at 0x3e0 ofs 0x00, 2 sockets host opts [0]: [ring] [65/6/0] [1/15/0] host opts [1]: [ring] [freq bypass] [65/6/0] [1/15/0] ISA irqs (default) = 3,4,5,7,9,10,11,12 status change on irq 11 cs: IO port probe 0x0100-0x03ff: excluding 0x220-0x22f 0x378-0x37f 0x388-0x38f 0x398-0x39f 0x3b8-0x3e7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0x0d0000-0x0dffff: clean. 3c574_cs.c v1.03 2/2/98 Donald Becker/David Hinds, becker@cesdis.gsfc.nasa.gov. loading device 'eth0'... eth0: 3Com 3c574, port 0x300, irq 3, hw_addr 00:60:08:EA:54:A9. eth0: No acceleration memory window. 64K FIFO split 1:1 Rx:Tx, autoselect MII interface. MII transceiver at index 0, status 7809. eth0: MII #0 status 7809, link partner capability 0000, setting half-duplex. PS/2 auxiliary pointing device detected -- driver installed. </PRE> <PRE> lo Link encap:Local Loopback inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0 UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 TX packets:24 errors:0 dropped:0 overruns:0 eth0 Link encap:10Mbps Ethernet HWaddr 00:60:08:EA:54:A9 inet addr:131.130.34.167 Bcast:131.130.34.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 TX packets:0 errors:0 dropped:0 overruns:0 Interrupt:3 Base address:0x300 dummy0 Link encap:10Mbps Ethernet HWaddr 00:00:00:00:00:00 inet addr:131.130.34.167 Bcast:131.130.255.255 Mask:255.255.0.0 UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 TX packets:0 errors:0 dropped:0 overruns:0