On 2021-02-21 21:20, Pal wrote:
/var/log/messages https://susepaste.org/89893327
First: I'm no expert in this scanner-world. I got tired some years ago and bought me a printer/photocopier/scanner that can scan to email/usb/network Check if your scanner is in the hardware database. $ systemd-hwdb query usb:v055Fp021D* You can also check the file where the ASCII definition is. Here's whats in my hwdb: $ egrep -A1 -i 055fp021d /usr/lib/udev/hwdb.d/20-usb-vendor-model.hwdb usb:v055Fp021D* ID_MODEL_FROM_DATABASE=BearPaw 2400 CU Plus If it's not seen by systemd-hwdb it might be that your /etc/udev/hwdb.bin isn't updated. It should be done by "systemd-hwdb update". But make sure you do understand the command so that you don't mock up the database. check: man hwdb man systemd-hwdb ---------From here on I'm just guessing------------- After that you have sane to deal with. But I'm afraid that I'm not much of a help there. Maybe someone else can help you with the inner workings of SANE. Maybe dig into /etc/sane.d/gt68xx.conf It might be that you lack the firmware for the scanner. At least it seems to be required from the dll-file. :model "BearPaw 2400 CU Plus" :firmware "required" :interface "USB" :usbid "0x055f" "0x021d" :status :good Check if there is a fw file. man sane-gt68xx (section FIRMWARE FILE) I saw some ref. that this scanner might be handled by sane-plustek: man sane-plustek -- /bengan