Hi, it works, but require manually edited ip-down script for ipsec FreeSwan - I solved this by settings IPTABLES rules into the customized ip-down script. I'am using it not for roadwarriors, but for 2 static sites, but it shloud works for all connections. in /usr/lib/ipsec is file _updown i made a copy to _updown_custom and modified following part (only added the "iptables ..." lines) : ------------------- cut ---------------------- up-client:) # connection to my client subnet coming up # If you are doing a custom version, firewall commands go here. iptables -I FORWARD 1 -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK \ -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK -j ACCEPT iptables -I FORWARD 1 -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK \ -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK -j ACCEPT ;; down-client:) # connection to my client subnet going down # If you are doing a custom version, firewall commands go here. iptables -D FORWARD -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK \ -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK -j ACCEPT iptables -D FORWARD -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK \ -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK -j ACCEPT ;; ------------------- cut ---------------------- then is necessary to modify the config file for ipsec (located in /etc/ipse.conf): - add the line with leftupdown: ------------------- cut ---------------------- conn %default leftupdown=/usr/lib/ipsec/_updown_custom ------------------- cut ---------------------- Thats all -> you will modify by this solution the iptables rules for firewall every time you will make the connection.... To start it is necessary nothing else then restart ipsec. Of coursce, if you are using Suse on both sides, you should set the other computer too (also only leftupdown script). With regards. Pavel Köhler Flynet "e-Commerce Systems" Czech republic http://www.flynet.cz tel.:(+420) 326 902 236 GSM: (+420) 602 366 372
-----Original Message----- From: Philipp Rusch [mailto:philipp.rusch@rusch-edv.de] Sent: Thursday, November 07, 2002 12:17 PM To: suse-security@suse.com Subject: [suse-security] VPN / FreeSWAN / SuSEFirewall2 - Problem
Hello list,
I don't get my VPN to work through the firewall ... Negotiation of tunnel is okay, that one gets established, but my question is:
The firewall is blocking packets from ipsec0, no matter what I define in SuSEFirewall2-rules, either it blocks packets from roadwarrior's ip address to internal IPs as "unauthorized target", if I define FW_AUTOPROTECT_SERVICES="yes", or it drops those packets, if defined as FW_AUTOROTECT_SERVICES="no" .
Configuration: SuSE 8.0/Kernel 2.4.18 FreeSWAN 1.98b, new X.509 Patches SuSEFirewall2 with :
NO Masquerading
FW_DEV_EXT="eth0 ipsec0"
FW_ROUTE="yes" ("no" gives same result)
FW_SERVICES_EXT_UDP="500" FW_SERVICES_EXT_IP="50"
FW_AUTOPROTECT_SERVICES="no"
Did I miss something ?
TIA !
Regards from Germany, Mit freundlichem Gruß, Philipp Rusch
-- Check the headers for your unsubscription address For additional commands, e-mail: suse-security-help@suse.com Security-related bug reports go to security@suse.de, not here