![](https://seccdn.libravatar.org/avatar/269a245a17cfd3594519d252d8682ca7.jpg?s=120&d=mm&r=g)
Nigel Rantor writes:
Egbert Eich wrote:
Nigel Rantor writes:
- I cannot use my VTs once the radonhd driver is loaded. Before then, during boot, I can see VT's fine, once GDM starts up X I can no longer see anything. My monitor reports "signal out of range" when I switch to a VT.
Can you please try with:
Option "UseAtomBIOS" "off" ?
With this option I can still not see the VT when I use Ctrl-Alt-<n>, but interestingly, when I switch back to X I *do* see brief glimpse of a black screen with a unix login prompt.
This does not take up the whole of the screen, it is merely a rectangle within the redrawn X display, and only for a moment.
OK. There is an indication in the log file you've sent in that something may have gone wrong. Please remove the option line in your config file and run X with '-logverbose 7'.
- The Gnome screen res applet doesn't seem to want to give me options other than:
1280x800 1280x768 1024x768 800x600 640x480
What does 'xrandr -q --verbose' report?
Attached.
OK, these are the only modes you have.
1280x800 (0x48) 83.5MHz h: width 1280 start 1344 end 1480 total 1680 skew 0 clock 49.7KHz v: height 800 start 801 end 804 total 828 clock 60.0Hz 1280x768 (0x49) 80.1MHz h: width 1280 start 1344 end 1480 total 1680 skew 0 clock 47.7KHz v: height 768 start 769 end 772 total 795 clock 60.0Hz 1024x768 (0x4a) 65.0MHz -HSync -VSync h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz v: height 768 start 771 end 777 total 806 clock 60.0Hz 800x600 (0x4b) 40.0MHz +HSync +VSync h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz v: height 600 start 601 end 605 total 628 clock 60.3Hz 640x480 (0x4c) 25.2MHz -HSync -VSync h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz v: height 480 start 490 end 492 total 525 clock 59.9Hz
DDC isn't working and we need to find out why.
Can you please run 'rhd_conntest