I have HP ATI RADEON DUAL HEAD 1300 256M. I logs i see
Card not in database: 0x7183:0x1002:0x0D02; using generic modesetting.
SP#432747-001
PBBA90E9VV60H1
AS#431834-001
MODEL A 92403
ATI-102-A924(B)
P/N 102A9240320000091
lspci, xorg.conf, Xorg.0.log attached
lspci
01:00.0 VGA compatible controller: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Device 0d02
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- TAbort- http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 10 15:36:47 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "DualHead"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]"
(**) | |-->Device "ati-head0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
(**) FontPath set to:
/usr/share/fonts/cyrillic/,
/usr/share/fonts/win-fonts/,
/usr/share/fonts/misc/,
/usr/share/fonts/75dpi/:unscaled,
/usr/share/fonts/corefonts/,
/usr/share/fonts/misc/,
/usr/share/fonts/75dpi/
(==) ModulePath set to "/usr/lib64/xorg/modules"
(**) Extension "Composite" is enabled
(**) Extension "RENDER" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x7c1680
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:7183:1002:0d02 ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] rev 0, Mem @ 0xd0000000/268435456, 0xfdcf0000/65536, I/O @ 0x0000de00/256, BIOS @ 0x????????/131072
(--) PCI: (0:1:0:1) 1002:71a3:1002:0d03 ATI Technologies Inc RV516 [Radeon X1300 Pro] (Secondary) rev 0, Mem @ 0xfdce0000/65536
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "extmod"
(II) Reloading /usr/lib64/xorg/modules/extensions/libextmod.so
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeonhd"
(II) Loading /usr/lib64/xorg/modules/drivers/radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
compiled for 1.7.1, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
R700 : Radeon R700.
RV710 : Radeon HD4570, HD4350.
RV730 : Radeon HD4670, HD4650.
RV740 : Radeon HD4770. EXPERIMENTAL AND UNTESTED.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
RV790 : Radeon HD 4890.
M92 : Mobility Radeon HD4330, HD4530, HD4570. EXPERIMENTAL.
M93 : Mobility Radeon M93. EXPERIMENTAL AND UNTESTED.
M96 : Mobility Radeon HD4600.
M97 : Mobility Radeon HD4860. EXPERIMENTAL AND UNTESTED.
M98 : Mobility Radeon HD4850, HD4870.
(II) RADEONHD: version 1.3.0, built from dist of git branch master, commit 8cbff7bf
(II) Primary Device is: PCI 01@00:00:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Option "AccelMethod" "EXA"
(**) RADEONHD(0): Option "HPD" "off"
(**) RADEONHD(0): Selected EXA 2D acceleration.
(WW) RADEONHD(0): !!! Option HPD is set !!!
This shall only be used to work around broken connector tables.
Please report your findings to radeonhd@opensuse.org
(II) RADEONHD(0): Card not in database: 0x7183:0x1002:0x0D02; using generic modesetting.
If - and only if - your card does not work or does not work optimally
please contact radeonhd@opensuse.org to help rectify this.
Use the subject: 0x7183:0x1002:0x0D02: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(0): Detected an RV516 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xfdcf0000 to 0x7f250a67b000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1002 SubsystemID: 0x0d02
IOBaseAddress: 0xde00
Filename: S3A92403.002
BIOS Bootup Message:
RV516 102-A92403-20 Hynix DDR2 BIOS 600e/400m Channel AB
(II) RADEONHD(0): Analog TV Default Mode: 1
(II) RADEONHD(0): Found default TV Mode NTSC
(--) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0xfffb000
(II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0xfffb000
(II) RADEONHD(0): Default Engine Clock: 600000
(II) RADEONHD(0): Default Memory Clock: 400000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): Found libdri 5.4.0.
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEONHD(0): Found libdrm 1.3.0.
(II) RADEONHD(0): Found radeon drm 1.31.0.
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(0): Default Engine Clock: 600000
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(0): FirmwareInfo Revision 0103
(II) RADEONHD(0): Unused attribute: ul3DAccelerationEngineClock 0
(II) RADEONHD(0): Unused attribute: ulDriverTargetEngineClock 600000
(II) RADEONHD(0): Unused attribute: ulDriverTargetMemoryClock 600000
(II) RADEONHD(0): Unused attribute: ucASICMaxTemperature 0
(II) RADEONHD(0): Scary bits: Estimated MinEngineClock 250000 kHz
(II) RADEONHD(0): Scary bits: Estimated MinMemoryClock 250000 kHz
(II) RADEONHD(0): No VoltageObjectInfo table
(II) RADEONHD(0): Default Engine Clock: 600000
(II) RADEONHD(0): Default Memory Clock: 400000
(II) RADEONHD(0): Current Engine Clock: 594000
(II) RADEONHD(0): Current Memory Clock: 396000
(WW) RADEONHD(0): Not supporting SetVoltage V1 yet
(II) RADEONHD(0): Unused attribute: SET_VOLTAGE_GET_MAX_VOLTAGE: type 6 mode 1 index 0
(II) RADEONHD(0): Power Management: used engine clock / memory clock / core (VDDC) voltage (0: ignore)
(II) RADEONHD(0): Power Management: Raw Ranges
(II) RADEONHD(0): Minimum 250000 kHz / 250000 kHz / 0.000 V
(II) RADEONHD(0): Maximum 0 kHz / 0 kHz / 0.000 V
(II) RADEONHD(0): Default 600000 kHz / 400000 kHz / 0.000 V
(II) RADEONHD(0): PowerPlayInfo Revision 0000
(EE) RADEONHD(0): Unusupported PowerPlayInfo Revision
(II) RADEONHD(0): Query for Get Chip Configs: not implemented
(EE) RADEONHD(0): Power Management: Cannot get known good chip configurations
(II) RADEONHD(0): Power Management: Validated Ranges
(II) RADEONHD(0): Minimum 250000 kHz / 250000 kHz / 0.000 V
(II) RADEONHD(0): Maximum 600000 kHz / 400000 kHz / 0.000 V
(II) RADEONHD(0): Default 600000 kHz / 400000 kHz / 0.000 V
(II) RADEONHD(0): Power Management: Final Levels
(II) RADEONHD(0): Off 250000 kHz / 250000 kHz / 0.000 V
(II) RADEONHD(0): Idle 600000 kHz / 400000 kHz / 0.000 V
(II) RADEONHD(0): Slow2D 600000 kHz / 400000 kHz / 0.000 V
(II) RADEONHD(0): Fast2D 600000 kHz / 400000 kHz / 0.000 V
(II) RADEONHD(0): Slow3D 600000 kHz / 400000 kHz / 0.000 V
(II) RADEONHD(0): Fast3D 600000 kHz / 400000 kHz / 0.000 V
(II) RADEONHD(0): Max3D 600000 kHz / 400000 kHz / 0.000 V
(II) RADEONHD(0): User 600000 kHz / 400000 kHz / 0.000 V
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI, "DVI-I DFP1 CRT1", RHD_DDC_0, RHD_HPD_NONE /*0*/, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACA } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "SVIDEO TV1", RHD_DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DVI-I DFP3 CRT2", RHD_DDC_1, RHD_HPD_NONE /*1*/, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACB } }
(--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-I 1
(--) RADEONHD(0): Attaching Output DAC A to Connector DVI-I 1
(--) RADEONHD(0): Attaching Output DAC B to Connector TV SVIDEO
(--) RADEONHD(0): Attaching Output TMDS B to Connector DVI-I 2
(--) RADEONHD(0): Attaching Output DAC B to Connector DVI-I 2
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/analog for Output DAC A
(II) RADEONHD(0): RandR: Adding RRoutput TV_SVIDEO for Output DAC B
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/analog for Output DAC B
(II) RADEONHD(0): Output DVI-I_1/digital using monitor section aticonfig-Monitor[0]
(II) RADEONHD(0): Output DVI-I_1/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_1/analog has no monitor section
(II) RADEONHD(0): Output TV_SVIDEO has no monitor section
(II) RADEONHD(0): Output DVI-I_2/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_2/analog has no monitor section
(II) RADEONHD(0): DAC A: Sensed Output: VGA
(II) RADEONHD(0): I2C device "RHD I2C line 0:ddc2" registered at address 0xA0.
(II) RADEONHD(0): I2C device "RHD I2C line 1:I2CProbe" registered at address 0x00.
(II) RADEONHD(0): I2C device "RHD I2C line 1:I2CProbe" removed.
(II) RADEONHD(0): Output DVI-I_1/digital disconnected
(II) RADEONHD(0): Output DVI-I_1/analog connected
(II) RADEONHD(0): Output TV_SVIDEO disconnected
(II) RADEONHD(0): Output DVI-I_2/digital disconnected
(II) RADEONHD(0): Output DVI-I_2/analog disconnected
(II) RADEONHD(0): Using fuzzy aspect match for initial modes
(II) RADEONHD(0): Output DVI-I_1/analog using initial mode 1024x768
(II) RADEONHD(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) RADEONHD(0): RandR 1.2 support enabled
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(II) RADEONHD(0): Using 3360x1050 Framebuffer with 3392 pitch
(II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x00D97000)
(==) RADEONHD(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib64/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEONHD(0): FB: Allocated Offscreen Buffer at offset 0x00D9F000 (size = 0x01999000)
(II) RADEONHD(0): FB: Allocated DRI Back Buffer at offset 0x02738000 (size = 0x00D97000)
(II) RADEONHD(0): FB: Allocated DRI Depth Buffer at offset 0x034CF000 (size = 0x00DAA000)
(II) RADEONHD(0): FB: Allocated GART table at offset 0x0FFF8000 (size = 0x00008000, end of FB)
(II) RADEONHD(0): FB: Allocated DRI Textures at offset 0x04279000 (size = 0x0BC00000)
(II) RADEONHD(0): Using 16 MB GART aperture
(II) RADEONHD(0): Using 2 MB for the ring buffer
(II) RADEONHD(0): Using 2 MB for vertex/indirect buffers
(II) RADEONHD(0): Using 12 MB for GART textures
(--) Depth 24 pixmap format is 32 bpp
(II) RADEONHD(0): Mapped IO @ 0xfdcf0000 to 0x7f250a67b000 (size 0x00010000)
(II) RADEONHD(0): Mapped FB @ 0xd0000000 to 0x7f24f6358000 (size 0x10000000)
(II) RADEONHD(0): Attempting to enable power management
(II) RADEONHD(0): Attempting to enable clock gating
(II) RADEONHD(0): Current Engine Clock: 594000
(II) RADEONHD(0): Current Memory Clock: 396000
(WW) RADEONHD(0): Not supporting SetVoltage V1 yet
(II) RADEONHD(0): Unused attribute: SET_VOLTAGE_GET_MAX_VOLTAGE: type 6 mode 1 index 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEONHD(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEONHD(0): [drm] framebuffer handle = 0xd0000000
(II) RADEONHD(0): [drm] added 1 reserved context for kernel
(II) RADEONHD(0): X context handle = 0x1
(II) RADEONHD(0): [drm] installed DRM signal handler
(II) RADEONHD(0): [pci] 16384 kB allocated with handle 0x104ae900
(II) RADEONHD(0): [pci] ring handle = 0x2b7ff000
(II) RADEONHD(0): [pci] Ring mapped at 0x7f24f6157000
(II) RADEONHD(0): [pci] Ring contents 0x00000000
(II) RADEONHD(0): [pci] ring read ptr handle = 0x1b800000
(II) RADEONHD(0): [pci] Ring read ptr mapped at 0x7f250a678000
(II) RADEONHD(0): [pci] Ring read ptr contents 0x00000000
(II) RADEONHD(0): [pci] vertex/indirect buffers handle = 0x2b800000
(II) RADEONHD(0): [pci] Vertex/indirect buffers mapped at 0x7f24f5f57000
(II) RADEONHD(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEONHD(0): [pci] GART texture map handle = 0x2b801000
(II) RADEONHD(0): [pci] GART Texture map mapped at 0x7f24f5397000
(II) RADEONHD(0): [drm] register handle = 0x2fff8000
(II) RADEONHD(0): [dri] Visual configs initialized
(II) RADEONHD(0): Attempting to set Engine Clock to 600000
(II) RADEONHD(0): Current Engine Clock: 594000
(II) RADEONHD(0): Current Memory Clock: 396000
(WW) RADEONHD(0): Not supporting SetVoltage V1 yet
(II) RADEONHD(0): Unused attribute: SET_VOLTAGE_GET_MAX_VOLTAGE: type 6 mode 1 index 0
(II) RADEONHD(0): [DRI] installation complete
(II) RADEONHD(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEONHD(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEONHD(0): [drm] dma control initialized, using IRQ 16
(II) RADEONHD(0): [drm] Initialized kernel GART heap manager, 12320768
(II) RADEONHD(0): Direct rendering enabled
(II) RADEONHD(0): Using DRM Command Processor (indirect) for acceleration.
(II) RADEONHD(0): Attaching EXA Composite hooks for R5xx.
(II) EXA(0): Offscreen pixmap area of 26841088 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) RADEONHD(0): On Crtc 0 Setting 60.0 Hz Mode: Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
None
(II) RADEONHD(0): DAC1 BG Adjustment: 0x6
(II) RADEONHD(0): DAC1 DAC Adjustment: 0xc
(**) RADEONHD(0): DPMS enabled
(II) RADEONHD(0): Xv: Textured Video initialised.
(WW) RADEONHD(0): Option "VendorName" is not used
(WW) RADEONHD(0): Option "ModelName" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib64/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEONHD(0): Setting screen physical size to 270 x 203
(II) config/hal: Adding input device Power Button
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 2.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" "(winkeys)"
(**) Option "xkb_options" "grp:ctrl_shift_toggle, grp_led:scroll"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" "(winkeys)"
(**) Option "xkb_options" "grp:ctrl_shift_toggle, grp_led:scroll"
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event1"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Found relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
(II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" "(winkeys)"
(**) Option "xkb_options" "grp:ctrl_shift_toggle, grp_led:scroll"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) RADEONHD(0): Attempting to disable power management
(II) RADEONHD(0): Attempting to disable clock gating
(II) RADEONHD(0): Attempting to set Engine Clock to 594000
(II) RADEONHD(0): Current Engine Clock: 594000
(II) RADEONHD(0): Current Memory Clock: 396000
(WW) RADEONHD(0): Not supporting SetVoltage V1 yet
(II) RADEONHD(0): Unused attribute: SET_VOLTAGE_GET_MAX_VOLTAGE: type 6 mode 1 index 0
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) ImPS/2 Logitech Wheel Mouse: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(EE) RADEONHD(0): RHDCSStop: Command Submission backend is not active!
(II) RADEONHD(0): [drm] removed 1 reserved context for kernel
(II) RADEONHD(0): [drm] unmapping 8192 bytes of SAREA 0x1b7ff000 at 0x7f250a679000
(II) RADEONHD(0): [drm] Closed DRM master.
Section "ServerLayout"
Identifier "DualHead"
Screen "Screen0" 0 0
# Screen "Screen1" RightOf "Screen0"
# Option "DesktopSetup" "horizontal"
# Option "CRT2Position" "RightOf 1680"
EndSection
Section "ServerFlags"
# Option "AllowEmptyImput" "false"
Option "AllowEmptyImput" "True"
#
### Option "AIGLX" "on"
#
# Option "DontZap" "off"
# Option "Xinerama" "On"
# Option "AutoAddDevices" "false"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
# FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/cyrillic/"
FontPath "/usr/share/fonts/win-fonts/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/corefonts/"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# Load "speedo"
# This loads the GLX module
Load "dbe" # Double buffer extension
Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# Load "freetype"
# Load "xtt"
Load "glx"
# This loads the DRI module
Load "dri"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "evdev"
# Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
#Section "Device"
# Identifier "intel"
# Driver "intel"
# Screen 0
# Option "DRI" "True"
# Option "XvMC" "True"
# Option "AccelMethod" "UXA"
#EndSection
Section "Device"
Identifier "ati-head0"
# Driver "ati"
Driver "radeonhd"
BusID "PCI:1:0:0"
Screen 0
Option "AccelMethod" "EXA"
#Option "HPD" "swap"
Option "HPD" "off"
EndSection
Section "Screen"
Identifier "Screen0"
Device "ati-head0"
# Device "intel"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050" "1024x768" "800x600" "640x480"
Virtual 3360 1050
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "ati-head1"
Monitor "Benq"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
#Section "Screen"
# Identifier "aticonfig-Screen[1]"
# Device "aticonfig-Device[1]"
# Monitor "aticonfig-Monitor[1]"
# DefaultDepth 24
# SubSection "Display"
# Viewport 0 0
# Depth 24
# EndSubSection
#EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection
