Am 22.04.2012 17:40, schrieb Andreas Färber:
I'm seeing the following errors from lspci:
pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c8
pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:d8
pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c0
pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c0
pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c8
My box has an IBM GXT6500P DVI graphics card plugged into PCI-X. After removing that card physically, I got an additional error:
pcilib: sysfs_fill_slots: Couldn't parse entry address 0000:00
pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c8
pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:d8
pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c0
pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c0
pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c8
The stdout output is identical between both, according to diff(1):
0001:00:02.0 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0001:00:02.2 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0001:00:02.3 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0001:00:02.4 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0001:00:02.6 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0001:cc:01.0 Mass storage controller: Promise Technology, Inc. 20275 (rev 01) 0001:d0:01.0 SCSI storage controller: Mylex Corporation AcceleRAID 600/500/400/Sapphire support Device (rev 04) 0002:00:02.0 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0002:00:02.2 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0002:00:02.3 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0002:00:02.4 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0002:cc:01.0 USB controller: NEC Corporation USB (rev 43) 0002:cc:01.1 USB controller: NEC Corporation USB (rev 43) 0002:cc:01.2 USB controller: NEC Corporation USB 2.0 (rev 04) 0002:d0:01.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03) 0002:d0:01.1 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
Is this a bug in pcilib? A hardware defect? How to verify?
After cross-grading from Factory ppc to 12.2 ppc64, I finally see my graphics card but still some warnings: linux:~ # lspci pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c0 pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c8 pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c8 pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:d8 pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c0 0000:00:01.0 VGA compatible controller: IBM GXT6500P Graphics Adapter (rev 04) 0001:00:02.0 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0001:00:02.2 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0001:00:02.3 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0001:00:02.4 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0001:00:02.6 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0001:cc:01.0 Mass storage controller: Promise Technology, Inc. 20275 (rev 01) 0001:d0:01.0 SCSI storage controller: Mylex Corporation AcceleRAID 600/500/400/Sapphire support Device (rev 04) 0002:00:02.0 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0002:00:02.2 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0002:00:02.3 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0002:00:02.4 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0002:cc:01.0 USB controller: NEC Corporation USB (rev 43) 0002:cc:01.1 USB controller: NEC Corporation USB (rev 43) 0002:cc:01.2 USB controller: NEC Corporation USB 2.0 (rev 04) 0002:d0:01.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03) 0002:d0:01.1 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03) Regards, Andreas -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-ppc+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-ppc+owner@opensuse.org