If/When you get it installed, PLEASE share your drive configuration!!
Again though, the ONLY way I managed to get it installed was via the
HMC and VNC (you never go into the graphical/Yast installation portion
on the console, only via VNC).
Even if you did make it into the Yast install via a console, the
graphical installation is almost to the point of unusable - even via a
terminal through HMC.
On 12/9/05, Martin Whitfield
Thanks guys
I tried Tomas's suggestion of insmod=e1000 hostip=192.168.1.10 netmask=255.255.255.0 This got me past the network config selections but I was then asked if I wanted to continue, selected yes and got a kernel panic again. Someone has also suggested I might get further if I use com port 2 as opposed to 1, will give it a go. I also now have a copy of SLES 9 sp2 so will also try that. If all that fails I will try upgrading the firmware. I'll let you know my findings
Regards Martin
Kevin McCombs
09/12/2005 14:58 To: suse-ppc@suse.com cc: Subject: Fw: [suse-ppc] Problems loading suse onto ibm p710
You may also want to verify that you are using the most up to date firmware release (SF235_180). Believe it or not, this often helps!
http://techsupport.services.ibm.com/server/mdownload/download.html
Contact me if you need assistance upgrading
____________________________ Kevin P.McCombs Unix Software Services IBM Systems and Technology Group http://www.ibm.com/servers/eserver/services ----- Forwarded by Kevin McCombs/Akron/IBM on 12/09/2005 09:52 AM -----
Tomas Baublys
To "Martin Whitfield" 12/09/2005 06:52
AM cc suse-ppc@suse.com Subject
Re: [suse-ppc] Problems loading suse onto ibm p710
You can provide following arguments to have your network configuration already done:
in this case there will be no DHCP request.
You will find SP2 for download links at: http://www.novell.com/products/linuxenterpriseserver/sp2.html
Mit freundlichen Gruessen / Best regards,
Tomas Baublys
IBM Certified Advanced Technical Expert (CATE) pSeries and AIX
pSeries Technical Sales Support EMEA Linux on Power Technical Focus Group Systems Sales, Central Region
"Martin Whitfield"
wrote on 12/09/2005 12:25:06 PM: Unfortunately with the following string "install console=hvsi0 textmode=1" the screen still goes blank after starting yast I also tried this vnc string "install vnc=1 vnc_password=abc123 netdevice=eth0", this takes me past the NIC selection and asks do I want
to use DHCP. I select 2 for no, however I get the kernel panic error again. I wonder if there is also an argument to "install" to answer the DHCP question, something like dhcp=no?
Thanks Martin
This e-mail contains information that may be confidential or privileged. If you are not the intended recipient please note that any copying, use, distribution or taking any action in reliance on the contents of this e-mail is prohibited and unlawful. If you have received this e-mail in error, please notify the sender by telephone or e-mail immediately. Any opinions expressed are those of the author and do not necessarily represent the views of Syan Ltd. This e-mail does not constitute either offer or acceptance of any contractually binding agreement; such offer or acceptance can only be communicated in writing.
Syan reserves the right to monitor and intercept e-mails sent and received on our network.
In accordance with good computing practice the recipient is advised to ensure that this e-mail is virus free.