Hello, a new disk from ri-data (ritek) 6X speed -rw
fine with dvdrwtools, it does not come in +rw on my store :( anyway I'll try
with an empty loop formated, burning over it.
--------------log-------------
tuxmaniaco ~ # dvd+rw-format -f /dev/dvdrw
* DVD±RW/-RAM format utility by
Gustavo Guillermo Pérez wrote:
Hello, a new disk from ri-data (ritek) 6X speed -rw fine with dvdrwtools, it does not come in +rw on my store :( anyway I'll try with an empty loop formated, burning over it.
Hi, Gustavo!
--------------log------------- tuxmaniaco ~ # dvd+rw-format -f /dev/dvdrw * DVD±RW/-RAM format utility by
, version 6.1. * 4.7GB DVD-RW media in Restricted Overwrite mode detected. * formatting 100.0\
This is correct.
tuxmaniaco ~ # cdrwtool -q -d /dev/pktcdvd/pktcdvd0 using device /dev/pktcdvd/pktcdvd0 open cdrom device: Input/output error
The "cdrwtool" is just for CD-RWs... you don't need it for DVD+RW drives.
tuxmaniaco ~ # dmesg | tail -n 10 UDF-fs: No partition found (1) attempt to access beyond end of device hdc: rw=0, want=68, limit=4 isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16 pktcdvd: writer pktcdvd0 mapped to hdc pktcdvd: pkt_get_last_written failed pktcdvd: pkt_get_last_written failed pktcdvd: pkt_get_last_written failed pktcdvd: pkt_get_last_written failed pktcdvd: pkt_get_last_written failed tuxmaniaco ~ #
... this is because your machine can't actually *find* a CD-RW drive in the machine to write to.
mkudffs --u16 --lvid=GUSBKP2006 --fsid=GUSBKP2006 --vid=GUS2006BKP /dev/pktcdvd/pktcdvd0 trying to change type of multiple extents tuxmaniaco ~ # mkudffs --u16 /dev/pktcdvd/pktcdvd0 trying to change type of multiple extents
What works for me is: dvd+rw-format -force /dev/hdc pktsetup pktcdvd0 /dev/hdc mkudffs --media-type=dvd --udfrev=0x0150 /dev/pktcdvd/pktcdvd0 mount -t udf -o rw,noatime /dev/pktcdvd/pktcdvd0 /media/dvdram/ '/dev/hdc' is, of course, the location of my DVD+RW drive. I have that in a shell script I run the first time I put a new disk into the drive and it sets everything up just nice. Best of luck! -- -- Michel Vaillancourt Wolfstar Systems
What works for me is:
dvd+rw-format -force /dev/hdc pktsetup pktcdvd0 /dev/hdc mkudffs --media-type=dvd --udfrev=0x0150 /dev/pktcdvd/pktcdvd0 At this point I got the same:
El Lunes, 31 de Julio de 2006 20:25, Michel Vaillancourt escribió: trying to change multiple type of extents other discs works fine dd if=/dev/zero bs=1M of=udf.iso count=4460 mkudffs -u16 udf.iso gzip udf.iso (to save space is about 4.4MB) this should work, but not for me zcat udf.iso.gz | growisofs -Z /dev/dvdrw=/dev/pts/0 instead mknod p tube zcat udf.iso.gz > tube in other terminal growiso -Z /dev/dvdrw=tube mounting the volume mount -o rw,noatime /dev/pktcdvd/pktcdvd0 /mnt and I got a read only udf filesystem mount -o remount,rw /mnt I can copy files :P, but on syslog I got errors about read only device... :( Well I guess would be better to find out +RW ultra hi speed media :P
mount -t udf -o rw,noatime /dev/pktcdvd/pktcdvd0 /media/dvdram/
'/dev/hdc' is, of course, the location of my DVD+RW drive. I have that in a shell script I run the first time I put a new disk into the drive and it sets everything up just nice. Best of luck! -- -- Michel Vaillancourt Wolfstar Systems
-- Gustavo Guillermo Pérez Compunauta uLinux www.compunauta.com
participants (2)
-
Gustavo Guillermo Pérez
-
Michel Vaillancourt