Hello all, I'm attempting to setup multipath iscsi to an equallogic ps4100 series san on opensuse 12.1 but I've run into a little issue, networking only working on one of the interfaces in the iscsi network. When both the interfaces in the iscsi network and configured and up I can only ping devices in the network over a single interface, say eth1 (ping -I eth1 172.16.0.2 ), and when i attempt to ping via eth2 ( ping -I eth2 172.16.0.2) it fails w/100% package loss. If I ifdown eth1, i'm then able to ping via eth2 (ping -I eth2 172.16.0.2). I've read/reviewed the SLES11 Storage Admin Guide, various Equallogic docs, and the great and might google, and haven't really come up with much. I think I may need to setup policy routing for this but I haven't had a chance to try it yet, so I figured in the meantime I'd reach out to the community. OpenSUSE 12.1: eth0 = 192.168.0.2 eth1 = 172.16.0.10 (iscsi net) eth2 = 172.16.0.11 (iscsi net) The SAN group_ip is 172.16.0.2 port 3260. Thanks! -- To unsubscribe, e-mail: opensuse-networking+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-networking+owner@opensuse.org