Hi, this is a tough one. When SuSE 8.0 tries to load some module for my built-in miniPCI Dell TrueMobile 1150 Series PC Card, it encounters a prism2_cs: CardServices release does not match! error message. Below I give a bief listing from dmesg: Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 02:01.0 PCI: Sharing IRQ 11 with 02:01.1 PCI: Sharing IRQ 11 with 02:01.2 PCI: Sharing IRQ 11 with 02:03.0 PCI: Found IRQ 11 for device 02:01.1 PCI: Sharing IRQ 11 with 02:01.0 PCI: Sharing IRQ 11 with 02:01.2 PCI: Sharing IRQ 11 with 02:03.0 PCI: Found IRQ 11 for device 02:03.0 PCI: Sharing IRQ 11 with 02:01.0 PCI: Sharing IRQ 11 with 02:01.1 PCI: Sharing IRQ 11 with 02:01.2 Yenta IRQ list 06b8, PCI irq11 Socket status: 30000006 Yenta IRQ list 06b8, PCI irq11 Socket status: 30000006 Yenta IRQ list 0000, PCI irq11 Socket status: 30000010 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. init_module: prism2_cs.o: 0.1.13-devel1 Loaded init_module: dev_info is: prism2_cs prism2_cs: CardServices release does not match! p80211.o: 0.1.13-devel1 Unloaded init_module: prism2_cs.o: 0.1.13-devel1 Loaded init_module: dev_info is: prism2_cs prism2_cs: CardServices release does not match! p80211.o: 0.1.13-devel1 Unloaded However, to some extent the card seems to be recognized: a:~ # cardctl ident Socket 0: no product info available Socket 1: no product info available Socket 2: product info: "Dell", "TrueMobile 1150 Series PC Card", "Version 01.01", "" manfid: 0x0156, 0x0002 function: 6 (network) Has anyone any helpful ideas? -Alex