Hallo zusammen, hat jemand die Koppelung mit einem Win CE PDA am laufen? Ich bekomme eine Verbindung, kann aber nichts kopieren oder bearbeiten. synce-serial-start : Serial connection established. Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB0 local IP address 192.168.131.102 remote IP address 192.168.131.201 Script /etc/ppp/ip-up finished (pid 15471), status = 0x0 ----------ctrl C oder ca 8 Minuten Terminating on signal 2. Connection terminated. Connect time 1.0 minutes. Sent 115 bytes, received 593 bytes. Script /etc/ppp/ip-down finished (pid 15916), status = 0x0 Connect time 1.0 minutes. Sent 115 bytes, received 593 bytes. synce-serial-start was unable to start the PPP daemon! ----------- An dem Strich bleibt die Verbindung ca 8 Minuten erhalten, danach kommt der 2. Teil. Bei einem Kommando z.B. pls kommt: pls pls: Unable to initialize RAPI: An unspecified failure has occurred Hat jemand eine Idee was noch fehlt? Der PDA ist ein Fujitsu LOOX 600. in messages steht dazu folgendes: 128 ID=31489 DF PROTO=TCP SPT=1123 DPT=5679 WINDOW=32768 RES=0x00 SYN URGP=0 OPT (020405B4010303000101080A000000000000000001010402) Feb 11 21:57:24 csb700 kernel: SFW2-IN-ILL-TARGET IN=ppp0 OUT= MAC= SRC=192.168.131.201 DST=192.168.131.102 LEN=64 TOS=0x00 PREC=0x00 TTL=128 ID=32257 DF PROTO=TCP SPT=1123 DPT=5679 WINDOW=32768 RES=0x00 SYN URGP=0 OPT (020405B4010303000101080A000000000000000001010402) Feb 11 21:57:45 csb700 pppd[16471]: Terminating on signal 2. Feb 11 21:57:45 csb700 pppd[16471]: Connection terminated. Feb 11 21:57:45 csb700 pppd[16471]: Connect time 4.6 minutes. Feb 11 21:57:45 csb700 pppd[16471]: Sent 115 bytes, received 1681 bytes. Gruß Reinhard