Hallo Zusammen, habe ein Problem mit meinem Winmodem vom lstcp kommt: 00:01.6 Modem: Silicon Integrated Systems [SiS] Intel 537 [56k Winmodem] (rev a0) Im BIOS wird es als SiS 7013 S/W Modem ausgegeben habe SuSE9.0 Kernel 2.4.21-192 und versucht den Treiber von Intel zu installieren (intel-537ep_secure-227390.tgz)... unter Hardware kommt dann das hier: 21: PCI 01.6: 0703 Modem (Generic) [Created at pci.65] Unique ID: 5QgM.vRLonO_fPLC Hardware Class: modem Model: "Mitac Intel 537 [56k Winmodem]" Vendor: pci 0x1039 "Silicon Integrated Systems Corp." Device: pci 0x7013 "Intel 537 [56k Winmodem]" SubVendor: pci 0x1071 "Mitac" SubDevice: pci 0x7521 Revision: 0xa0 I/O Ports: 0x1400-0x14ff (rw) I/O Ports: 0x1c00-0x1c7f (rw) IRQ: 11 (1134 events) Driver Info #0: Driver Status: slamrmo is not active Driver Activation Cmd: "modprobe slamrmo" Config Status: cfg=yes, avail=yes, need=no, active=unknown und wenn ich dann modprobe mache (was immer das bedeuten soll) kommt ein Fehler: Warning: loading /lib/modules/2.4.21-192-default/misc/slmdm.o will taint the kernel: non-GPL license - Smart Link Ltd. See http://www.tux.org/lkml/#export-tainted for information about tainted modules Module slmdm loaded, with warnings Warning: loading /lib/modules/2.4.21-192-default/misc/slamrmo.o will taint the kernel: non-GPL license - Smart Link Ltd. /lib/modules/2.4.21-192-default/misc/slamrmo.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.21-192-default/misc/slamrmo.o: insmod /lib/modules/2.4.21-192-default/misc/slamrmo.o failed /lib/modules/2.4.21-192-default/misc/slamrmo.o: insmod slamrmo failed was ist zu tun, damit das Dink zum laufen kommt? Grüss Euch Marcel