New Kubic snapshot 20211127 released!

28 Nov 2021

      Please note that this mail was generated by a script.
The described changes are computed based on the x86_64 DVD.
The full online repo contains too many changes to be listed here.

Please check the known defects of this snapshot before upgrading:
https://openqa.opensuse.org/tests/overview?distri=kubic&groupid=1&version=Tumbleweed&build=20211127
https://bugzilla.opensuse.org/buglist.cgi?product=openSUSE%20Tumbleweed&component=Kubic&query_format=advanced&resolution=---

Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org.
For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports
Packages changed:
  cups

=== Details ===

==== cups ====
Subpackages: cups-config libcups2

- Provide /usr/share/cups/ppdc/ in the "cups" main package
  to avoid that "lpinfo -m" results in /var/log/cups/error_log
  things like "ppdc: Unable to find include file font.defs"
  or "ppdc: Unable to find include file hp.h" and then
  "Bad driver information file /usr/share/cups/drv/sample.drv"
  (bsc#1186843)
- When cupsd creates directories with specific owner group
  and permissions (usually owner is 'root' and group matches
  "configure --with-cups-group=lp") specify same owner group and
  permissions in the RPM spec file to ensure those directories
  are installed by RPM with the right settings because if those
  directories were installed by RPM with different settings then
  cupsd would use them as is and not adjust its specific owner
  group and permissions which could lead to privilege escalation
  from 'lp' user to 'root' via symlink attacks e.g. if owner is
  falsely 'lp' instead of 'root' CVE-2021-25317 (bsc#1184161)
- upstream_pull_174.patch is
  https://github.com/OpenPrinting/cups/pull/174
  "Use 60s timeout for read_thread, revert read limits"
  to fix printing with older USB printers
- New upstream URL https://openprinting.github.io/cups
- Disable testsuite for now via "bcond_with testsuite"
  until https://github.com/OpenPrinting/cups/issues/155 is fixed
- Add "testsuite" conditional that disables anything within %check
- fix-negotiate-authentication-between-CGIs-and-scheduler.patch
  fixes web UI Kerberos authentication (bsc#1175960)
- Upstream changed to https://github.com/OpenPrinting/cups
- Added %check section to specfile that executes
  the old 'make check' and the new (see 2.3.3op1) 'make test'
- Version upgrade to 2.3.3op2:
  * Security: Fixed a buffer (read) overflow
    in the ippReadIO function (CVE-2020-10001)
  * Clarified the documentation for the "Listen" directive
  * Fixed duplicate ColorModel entries for AirPrint printers
  * Fixed directory/permission defaults for Debian
    kfreebsd-based systems
  * Fixed crash bug in ppdOpen
  * Fixed regression in snprintf emulation function
  * The scheduler's systemd service file now waits
    for the nslcd service to start
  * The libusb-based USB backend now uses a simpler read timer
    implementation to avoid a regression in a previous change
  * The PPD caching code now only tracks the APPrinterIconPath
    value on macOS
  * Fixed segfault in help.cgi when searching in man pages
  * Root certificates were incorrectly stored in "~/.cups/ssl".
  * Version upgrade to 2.3.3op1:
  * The automated test suite can now be activated using make test
    for consistency with other projects and CI environments - the
    old make check continues to work as well, and the previous test
    server behavior can be accessed by running make testserver.
  * ippeveprinter now supports multiple icons and strings files.
  * ippeveprinter now uses the system's FQDN with Avahi.
  * ippeveprinter now supports Get-Printer-Attributes on "/".
  * ippeveprinter now uses a deterministic "printer-uuid" value.
  * ippeveprinter now uses system sounds on macOS
    for Identify-Printer.
  * Updated ippfind to look for files in "~/Desktop" on Windows.
  * Updated ippfind to honor SKIP-XXX directives with PAUSE.
  * Updated IPP Everywhere support to work around printers that only
    advertise color raster support but really also support grayscale
  * ipptool now supports DNS-SD URIs like
    ipps://My%20Printer._ipps._tcp.local
  * The scheduler now allows root backends to have world read
    permissions but not world execute permissions
  * Failures to bind IPv6 listener sockets no longer cause errors
    if IPv6 is disabled on the host
  * The SNMP backend now supports the HP and Ricoh vendor MIBs
  * The scheduler no longer includes a timestamp in files it writes
  * The systemd service names are now "cups.service"
    and "cups-lpd.service"
  * The scheduler no longer adds the local hostname to
    the ServerAlias list
  * Added LogFileGroup directive in "cups-files.conf" to control
    the group owner of log files
  * Added --with-max-log-size configure option
  * Added --enable-sync-on-close configure option
  * Added --with-error-policy configure option
  * IPP Everywhere PPDs could have an "unknown" default InputSlot
  * The httpAddrListen function now uses a listen backlog of 128.
  * Added USB quirks
  * Fixed IPP Everywhere v1.1 conformance issues in ippeveprinter.
  * Fixed DNS-SD name collision support in ippeveprinter.
  * Fixed compiler and code analyzer warnings.
  * Fixed TLS support on Windows.
  * Fixed ippfind sub-type searches with Avahi.
  * Fixed the default hostname used by ippeveprinter on macOS.
  * Fixed resolution of local IPP-USB printers with Avahi.
  * Fixed coverity issues
  * Fixed httpAddrConnect issues
  * Fixed web interface device URI issue
  * Fixed lp/lpr "printer/class not found" error reporting
  * Fixed xinetd support for LPD clients
  * Fixed libtool build issue
  * Fixed a memory leak in the scheduler
  * Fixed a potential integer overflow in the PPD hashing code
  * Fixed output-bin and print-quality handling issues
  * Fixed PPD options getting mapped to odd IPP values
    like "tray---4"
  * Fixed remote access to the cupsd.conf and log files
  * Fixed the automated test suite when running in certain
    build/CI environments
  * Fixed a logging regression caused by a previous change
    for Apple issue #5604
  * Fixed fax phone number handling with GNOME
  * Fixed potential rounding error in rastertopwg filter
  * Fixed the "uri-security-supported" value from the scheduler
  * Fixed IPP backend crash bug with "printer-alert" values
  * Removed old Solaris inetconv(1m) reference in cups-lpd man page
  * Fixed default options that incorrectly use the "custom" prefix
  * Fixed a memory leak when resolving DNS-SD URIs
  * Fixed systemd status reporting by adopting the notify interface
  * Fixed crash in rastertopwg
  * Fixed cupsManualCopies values in IPP Everywhere PPDs
- Removed let-cupsd-start-after-network.patch
  as it is no longer required
- Removed CVE-2020-10001.patch as a fix as been merged upstream
- Removed section of specfile responsible for
  renaming "org.cups.cups*" systemd files to cups*, due to
  upstream renaming these files
- Remove code comments from expanded scriptlets to reduce size
  cf. https://build.opensuse.org/request/show/879976
- CVE-2020-10001.patch fixes CVE-2020-10001 (bsc#1180520)
  access to uninitialized buffer in ipp.c
- Version upgrade to 2.3.3:
  * CVE-2020-3898: The 'ppdOpen' function did not handle invalid UI
    constraint.  'ppdcSource::get_resolution' function did not
    handle invalid resolution strings.
  * CVE-2019-8842: The 'ippReadIO' function may under-read an
    extension field.
  * Fixed WARNING_OPTIONS support for GCC 9.x
  Changes in CUPS 2.3.2:
  Localization updates
  Changes in CUPS 2.3.1:
  * CVE-2019-2228: The 'ippSetValuetag' function did not validate
    the default language value.
  * Fixed a crash bug in the web interface.
  * The PPD cache code now looks up page sizes using their
    dimensions.
  * PPD files containing "custom" option keywords did not work.
  * Added a workaround for the scheduler's systemd support.
  * Added a DigestOptions directive for the 'client.conf' file to
    control whether MD5-based Digest authentication is allowed.
  * Fixed a bug in the handling of printer resource files.
  * The libusb-based USB backend now reports an error when the
    distribution permissions are wrong.
  * Added paint can labels to Dymo driver.
  * The 'ippeveprinter' program now supports authentication.
  * The 'ippeveprinter' program now advertises DNS-SD services on
    the correct interfaces, and provides a way to turn them off.
  * The '--with-dbusdir' option was ignored by the configure
    script.
  * Sandboxed applications were not able to get the default
    printer.
  * Log file access controls were not preserved by 'cupsctl'.
  * Default printers set with 'lpoptions' did not work in all
    cases.
  * Fixed an error in the jobs web interface template.
  * Fixed an off-by-one error in 'ippEnumString'.
  * Fixed some new compiler warnings.
  * Fixed a few issues with the Apple Raster support.
  * The IPP backend did not detect all cases where a job should be
    retried using a raster format.
  * Fixed spelling of "fold-accordion".
  * Fixed the default common name for TLS certificates used by
    'ippeveprinter'.
  * Fixed the option names used for IPP Everywhere finishing
    options.
  * Added support for the second roll of the DYMO Twin/DUO label
    printers.
  Changes in CUPS v2.3.0:
  * CVE-2019-8696 and CVE-2019-8675: Fixed SNMP buffer overflows.
  * Added a GPL2/LGPL2 exception to the new CUPS license terms.
  * Fixed a bug in the scheduler job cleanup code.
  * Fixed builds when there is no TLS library.
  * "make" failed with GZIP options.
  * Fixed potential excess logging from the scheduler when removing
    job files.
  * Fixed a NULL pointer dereference bug in 'httpGetSubField2'.
  * Added FIPS-140 workarounds for GNU TLS.
  * The scheduler no longer provides a default value for the
    description.
  * The scheduler now logs jobs held for authentication using the
    error level so it is clear what happened.
  * The 'lpadmin' command did not always update the PPD file for
    changes to the 'cupsIPPSupplies' and 'cupsSNMPSupplies' keywords.
  * The scheduler now uses both the group's membership list as well
    as the various OS-specific membership functions to determine
    whether a user belongs to a named group.
  * Added USB quirks rule for HP LaserJet 1015.
  * Fixed some PPD parser issues.
  * The IPP parser no longer allows invalid member attributes in
    collections.
  * The configure script now treats the "wheel" group as a
    potential system group.
  * Fixed IPP buffer overflow.
  * Fixed memory disclosure issue in the scheduler.
  * Fixed DoS issues in the scheduler.
  * Fixed an issue with unsupported "sides" values in the IPP
    backend.
  * The scheduler would restart continuously when idle and printers
    were not shared.
  * Fixed an issue with 'EXPECT !name WITH-VALUE ...' tests.
  * Fixed a command ordering issue in the Zebra ZPL driver.
  * Fixed a memory leak in 'ppdOpen'.
  Changes in CUPS v2.3rc1:
  * The 'cups-config' script no longer adds extra libraries when linking against
    shared libraries.
  * The supplied example print documents have been optimized for
    size.
  * The 'cupsctl' command now prevents setting "cups-files.conf"
    directives.
  * The "forbidden" message in the web interface is now explained.
  * The footer in the web interface covered some content on small
    displays.
  * The libusb-based USB backend now enforces read limits,
    improving print speed in many cases.
  * The 'ippeveprinter' command now looks for print commands in
    the "command" subdirectory.
  * The 'ipptool' command now supports '$date-current' and
    '$date-start' variables to insert the current and starting date
    and time values, as well as ISO-8601 relative time values such
    as "PT30S" for 30 seconds in the future.
  Changes in CUPS v2.3b8
  * Media size matching now uses a tolerance of 0.5mm.
  * The lpadmin command would hang with a bad PPD file.
  * Fixed a potential crash bug in cups-driverd.
  * Fixed a performance regression with large PPDs.
  * Fixed a memory reallocation bug in HTTP header value expansion.
  * Timed out job submission now yields an error.
  * Restored minimal support for the 'Emulators' keyword in PPD
    files to allow old Samsung printer drivers to continue to work.
  * The scheduler did not encode octetString values like
    "job-password" correctly for the print filters.
  * The 'cupsCheckDestSupported' function did not check octetString
    values correctly.
  * Added support for 'UserAgentTokens' directive in "client.conf".
  * Updated the systemd service file for cupsd.
  * The 'ippValidateAttribute' function did not catch all instances
    of invalid UTF-8 strings.
  * Fixed an issue with the self-signed certificates generated by
    GNU TLS.
  * Fixed a potential memory leak when reading at the end of a
    file.
  * Fixed potential unaligned accesses in the string pool.
  * Fixed a potential memory leak when loading a PPD file.
  * Added a USB quirks rule for the Lexmark E120n.
  * Updated the USB quirks rule for Zebra label printers.
  * The lpadmin command, web interface, and scheduler all queried
    an IPP Everywhere printer differently, resulting in different
    PPDs for the same printer.
  * The web interface no longer provides access to the log files.
  * Non-Kerberized printing to Windows via IPP was broken.
  * The scheduler no longer stops a printer if an error occurs when
    a job is canceled or aborted.
  * Added a USB quirks rule for the DYMO 450 Turbo.
  * Added a USB quirks rule for Xerox printers.
  * The scheduler's self-signed certificate did not include all of
    the alternate names for the server when using GNU TLS.
  * Fixed some PPD caching and IPP Everywhere PPD
    accounting/password bugs.
  * Fixed 'PreserveJobHistory' bug with time values.
  * The scheduler no longer advertises the HTTP methods it
    supports.
  * The scheduler did not always idle exit as quickly as it could.
  * Added a new 'ippeveprinter' command based on the old ippserver
    sample code.
  Changes in CUPS v2.3b7
  * Running ppdmerge with the same input and output filenames did
    not work as advertised.
  * Rebase let-cupsd-start-after-network.patch and
    cups-config-libs.patch.
  * Drop issue5509-fix-utf-8-validation-issue.patch and
    issue5453.patch: fixed upstream.
- make cups-devel pull in cups-rpm-helper to fix printer driver
  provides (boo#1172407)
- Fixes for %_libexecdir changing to /usr/libexec
- Add issue5509-fix-utf-8-validation-issue.patch (bsc#1118118)
  Fixes https://github.com/apple/cups/issues/5509
- Remove libcupscgi1, libcupsmime1, libcupsppdc1 from
  baselibs.conf
- Version upgrade to 2.3b6:
  This is the sixth beta of the CUPS 2.3 series which adopts the
  new CUPS license, adds support for IPP presets and finishing
  templates, and fixes a number of bugs and "polish" issues.
  For details see https://github.com/apple/cups/releases
  or the CHANGES.md file.
  Backward incompatible changes:
  * The cupsaddsmb program has been removed (Issue #5449)
  * The cupstestdsc program has been removed (Issue #5450)
  * The cupscgi, cupsmime, and cupsppdc support libraries
    are no longer installed as shared libraries.
  Changes include:
  * CVE-2018-4700: Linux session cookies used a predictable
    random number seed.
  * The lpoptions command now works with IPP Everywhere printers
    that have not yet been added as local queues (Issue #5045)
  * The lpadmin command would create a non-working printer
    in some error cases (Issue #5305)
  * The scheduler would crash if an empty AccessLog directive
    was specified (Issue #5309)
  * The scheduler did not idle-exit on some
    Linux distributions (Issue #5319)
  * Fixed a regression in the changes to ippValidateAttribute
    (Issue #5322, Issue #5330)
  * Fixed a crash bug in the Epson dot matrix driver (Issue #5323)
  * Automatic debug logging of job errors did not work
    with systemd (Issue #5337)
  * The web interface did not list the
    IPP Everywhere "driver" (Issue #5338)
  * The scheduler did not report all of the supported job options
    and values (Issue #5340)
  * The IPP Everywhere "driver" now properly supports
    face-up printers (Issue #5345)
  * Fixed some typos in the label printer drivers (Issue #5350)
  * Setting the Community name to the empty string in snmp.conf
    now disables SNMP supply level monitoring by all the
    standard network backends (Issue #5354)
  * Multi-file jobs could get stuck if the backend failed
    (Issue #5359, Issue #5413)
  * The IPP Everywhere "driver" no longer does local filtering
    when printing to a shared CUPS printer (Issue #5361)
  * The lpadmin command now correctly reports IPP errors
    when configuring an IPP Everywhere printer (Issue #5370)
  * Fixed some memory leaks discovered by Coverity (Issue #5375)
  * The PPD compiler incorrectly terminated JCL options
    (Issue #5379)
  * The cupstestppd utility did not generate errors for
    missing/mismatched CloseUI/JCLCloseUI keywords (Issue #5381)
  * The scheduler now reports the actual location
    of the log file (Issue #5398)
  * The generated PPD files for IPP Everywhere printers
    did not contain the cupsManualCopies keyword (Issue #5433)
  * Kerberos credentials might be truncated (Issue #5435)
  * The handling of MaxJobTime 0 did not match the documentation
    (Issue #5438)
  * Fixed a bug adding a queue with the -E option (Issue #5440)
  * The scheduler did not validate that required initial request
    attributes were in the operation group (rdar://41098178)
  * Fixed an issue with HTTP Digest authentication
    (rdar://41709086)
  * The scheduler could crash when job history was purged
    (rdar://42198057)
  * Fixed a crash bug when mapping PPD duplex options
    to IPP attributes (rdar://46183976)
  * Fixed a memory leak for some IPP (extension) syntaxes.
  * The snmp backend is now deprecated.
- issue5453.patch fixes https://github.com/apple/cups/issues/5453
- Version upgrade to 2.3b5:
  This is the fifth beta of the CUPS 2.3 series which adopts the
  new CUPS license, adds support for IPP presets and finishing
  templates, and fixes a number of bugs and "polish" issues.
  For details see https://github.com/apple/cups/releases
  or the CHANGES.md file.
  Changes include:
  * The ipptool program no longer checks for duplicate attributes
    when running in list or CSV mode (Issue #5278)
  * The cupsCreateJob, cupsPrintFile2, and cupsPrintFiles2 APIs
    did not use the supplied HTTP connection (Issue #5288)
  * Fixed another crash in the scheduler when adding an IPP
    Everywhere printer (Issue #5290)
  * Added a workaround for certain web browsers that
    do not support multiple authentication schemes
    in a single response header (Issue #5289)
  * Fixed policy limits containing the All operation (Issue #5296)
  * The scheduler was always restarted after idle-exit
    with systemd (Issue #5297)
  * The mailto notifier did not wait for the
    welcome message (Issue #5312)
  * Fixed a parsing bug in the pstops filter (Issue #5321)
  * The scheduler allowed environment variables to be specified
    in the cupsd.conf file (rdar://37836779, rdar://37836995,
    rdar://37837252, rdar://37837581)
  * Fax queues did not support pause (p) or
    wait-for-dialtone (w) characters (rdar://39212256)
  * The scheduler did not validate notify-recipient-uri values
    properly (rdar://40068936)
  * The IPP parser allowed invalid group tags (rdar://40442124)
  * Fixed a parsing bug in the new authentication code.
- issue5296_fix_policy_limits_using_All.patch is obsolete
  because it is fixed upstream (see "Issue #5296" above)
- Add patch let-cupsd-start-after-network.patch
  Let cuspd start after possible network connection (boo#1111351)
  This let cupsd also stop before a used network connection goes
  down, hence the cusp does not lock due waiting on remote printers.
- Fix warning message upon update (boo#1050845): Remove template
  service cups-lpd@ from service_* macro in scriptlets.
- issue5296_fix_policy_limits_using_All.patch fixes
  https://github.com/apple/cups/issues/5296
  by only the actually relevant part of
  https://github.com/apple/cups/commit/0873f681e43c04972b3d6bc90bdbdedb29e6e91...
  (follow-up of boo#936309 and bsc#577936 starting at comment 13)
- Version upgrade to 2.3b4:
  This is the fourth beta of the CUPS 2.3 series.
  For details see https://github.com/apple/cups/releases
  or the CHANGES.md file.
  Changes include:
  * Additional security fixes for:
    bsc#1061066 DBUS library aborts caller process
    in _dbus_check_is_valid_utf8 (in particular that aborts cupsd)
    and
    bsc#1087018 CVE-2017-18248: cups: The add_job function in
    scheduler/ipp.c in CUPS before 2.2.6, when D-Bus support is
    enabled, can be crashed by remote attackers by sending print
    jobs with an invalid username, related to a D-Bus notification
    which are the CUPS upstream issues
    https://github.com/apple/cups/issues/5143
    Remote DoS attack against cupsd via invalid username
    and malicious D-Bus library
    and
    https://github.com/apple/cups/issues/5186
    squash non-UTF-8 strings into ASCII on plain IPP level
    and
    https://github.com/apple/cups/issues/5229
    persistently substitute invalid job attributes
    with default values - not only in add_job
    see also
    bsc#1087072 dbus-1:
    Disable assertions to prevent un-expected DDoS attacks
  * NOTICE: Raw print queues are now deprecated (Issue #5269)
    so that now there is a warning message when you
    add or modify a queue to use the "raw driver" but
    raw printing will continue to work through CUPS 2.3.x, cf.
    https://lists.cups.org/pipermail/cups/2018-March/074060.html
  * Kerberized printing to another CUPS server did not work
    correctly (Issue #5233)
  * The scheduler now supports using temporary print queues
    for older IPP/1.1 print queues like those shared by CUPS 1.3
    and earlier (Issue #5241)
  * Systemd did not restart cupsd when configuration changes
    were made that required a restart (Issue #5263)
  * Fixed an Avahi crash bug in the scheduler (Issue #5268)
  * TLS connections now properly timeout (rdar://34938533)
  * Removed support for the '-D_PPD_DEPRECATED=""' developer
    cheat - the PPD API should no longer be used.
  * Removed support for '-D_IPP_PRIVATE_STRUCTURES=1' developer
    cheat - the IPP accessor functions should be used instead.
  * The symlink rastertodymo -> rastertolabel
    in /usr/lib/cups/filter is no longer provided.
- Removed fix_filter_Makefile.patch
  because since CUPS 2.3b4 it is fixed in the upstream code via
  https://github.com/apple/cups/issues/5247 more precisely via
  https://github.com/apple/cups/commit/ab89234de2d9bf36bb59f2aa4873d98e95ca4df...
- Version upgrade to 2.3b3:
  This is the third beta of the CUPS 2.3 series.
  For details see https://github.com/apple/cups/releases
  Changes include:
  * More fixes for printing to old CUPS servers (Issue #5211)
  * Additional changes for the scheduler to substitute
    default values for invalid job attributes
    when running in "relaxed conformance" mode
    (Issue #5229 - a follow-up of issues #5186 and #5143)
  A detailed list of changes can be found in the CHANGES.md file.
- fix_filter_Makefile.patch fixes
  https://github.com/apple/cups/issues/5247
- Version upgrade to 2.3b2:
  This is the second beta of the CUPS 2.3 series.
  For details see https://github.com/apple/cups/releases
  Changes include:
  * Printing to old CUPS servers has been fixed (Issue #5211)
  A detailed list of changes can be found in the CHANGES.md file.
- Version upgrade to 2.3b1:
  This is the first beta of the CUPS 2.3 series which
  adopts the new CUPS license (Apache License, Version 2.0),
  adds support for IPP presets and finishing templates,
  and fixes a number of bugs and "polish" issues.
  For details see https://github.com/apple/cups/releases
  Changes include:
  * CUPS is now provided under the Apache License, Version 2.0
  * The CUPS library now supports the latest HTTP Digest
    authentication specification including support for SHA-256
    (Issue #4862)
  * Dropped RSS subscription management from the
    web interface (Issue #5012)
  * The lpadmin command now provides a better error message when
    an unsupported System V interface script is used (Issue #5111)
  * The SSLOptions directive now supports MinTLS and MaxTLS
    options to control the minimum and maximum TLS versions
    that will be allowed, respectively (Issue #5119)
  * Dropped hard-coded CGI scripting language support (Issue #5124)
  * The scheduler now substitutes default values for invalid
    job attributes when running in "relaxed conformance"
    mode (Issue #5186 - a follow-up of issue #5143)
  A detailed list of changes can be found in the CHANGES.md file.
- Make sure cups-libs-<targettype> is removed.
- Version upgrade to 2.2.6:
  CUPS 2.2.6 is a general bug fix release.
  For details see https://github.com/apple/cups/releases
  Changes include:
  * DBUS notifications could crash the scheduler (Issue #5143)
    (see also bsc#1061066 "DBUS library aborts caller process")
  A detailed list of changes can be found in the CHANGES.md file.
- Use again the baselibs.conf from Fri Oct 13 11:11:10 UTC 2017
  that got broken by the change on Wed Oct 18 06:11:10 UTC 2017.
- Version upgrade to 2.2.5:
  CUPS 2.2.5 is a general bug fix release.
  For details see https://github.com/apple/cups/releases
- Version upgrade to 2.2.4:
  CUPS 2.2.4 is a general bug fix release.
  For details see https://github.com/apple/cups/releases
- Removed
  0001-Update-cupsEnumDests-implementation-to-return-early-if-all.patch
  0002-Save-work-on-Avahi-code.patch
  0003-Avahi-fixes-for-cupsEnumDests.patch
  because since CUPS 2.2.4 it is fixed in the upstream code
  via https://github.com/apple/cups/pull/4989 more precisely via
  https://github.com/apple/cups/commit/a2187a63425a3d6c05de1e1cbf8c26fd39a1ace...
  https://github.com/apple/cups/commit/657c5b5f91e6d5120c4ad7b118cf9098dd27f03...
  https://github.com/apple/cups/commit/3fae3b337df0be1a766857be741173d8a9915da...
- Fix typo in requires
- Implement shared library packaging guideline [boo#862112]
- Update package descriptions.
- Remove redundant Requires(pre) line ? the use of %post -p
  already implies it.
- Pre-require user(lp) in cups-libs
- In /usr/lib/tmpfiles.d/cups.conf use
  group 'root' for /run/cups/certs (boo#1042916).
- Major backward incompatible change since CUPS 2.2.0:
  There is no longer the directory /etc/cups/interfaces because
  since CUPS 2.2.0 so called "System V style Interface Scripts"
  are no longer supported for security reasons (see below the
  entry about the changes included in CUPS 2.2.0).
- Disabled cups-2.1.0-cups-systemd-socket.patch
  because it does no longer apply which needs to be examined
  and decided by someone who knows about systemd internals.
- Disabled
  0001-Update-cupsEnumDests-implementation-to-return-early-if-all.patch
  0002-Save-work-on-Avahi-code.patch
  0003-Avahi-fixes-for-cupsEnumDests.patch
  because they do no longer apply which needs to be examined
  and decided by someone who knows about Avahi internals.
- Version upgrade to 2.2.3:
  CUPS 2.2.3 is a general bug fix release.
  See https://github.com/apple/cups/releases
  Changes include:
  * The IPP backend could get into an infinite loop for certain
    errors, causing a hung queue (rdar://problem/28008717)
  * The scheduler could pause responding to client requests in
    order to save state changes to disk (rdar://problem/28690656)
  * Added support for PPD finishing keywords
    (Issue #4960, Issue #4961, Issue #4962)
  * The IPP backend did not send a media-col attribute for just
    the source or type (Issue #4963)
  * IPP Everywhere print queues did not always support all print
    qualities supported by the printer (Issue #4953)
  * IPP Everywhere print queues did not always support all media
    types supported by the printer (Issue #4953)
  * The IPP Everywhere PPD generator did not return useful error
    messages (Issue #4954)
  * The IPP Everywhere finishings support did not work correctly
    with common UI or command-line options (Issue #4976)
  * Fixed an error handling issue for the network backends
    (Issue #4979)
  * The "reprint job" option was not available for some canceled
    jobs (Issue #4915)
  * Updated the job listing in the web interface (Issue #4978)
  A detailed list of changes can be found in the CHANGES.txt file.
- Version upgrade to 2.2.2:
  CUPS 2.2.2 is a general bug fix release.
  See https://github.com/apple/cups/releases
  Changes include:
  * Fixed some issues with IPP Everywhere printer support
    (Issue #4893, Issue #4909, Issue #4916, Issue #4921,
    Issue #4923, Issue #4932, Issue #4933, Issue #4938)
  * The rastertopwg filter could crash with certain input
    (Issue #4942)
  * The scheduler did not detect when an encrypted connection
    was closed by the client on Linux (Issue #4901)
  * The cups-lpd program did not catch all legacy usage
    of ISO-8859-1 (Issue #4899)
  * The scheduler no longer creates log files on startup
    (rdar://problem/28332470)
  * The ippContainsString function now uses case-insensitive
    comparisons for mimeMediaType, name, and text values in
    conformance with RFC 2911.
  * The network backends now log the addresses that were found
    for a printer (rdar://problem/29268474)
  * Let's Encrypt certificates did not work when the hostname
    contained uppercase letters (Issue #4919)
  * Fixed reporting of printed pages in the web interface
    (Issue #4924)
  * Updated systemd config files (Issue #4935)
  A detailed list of changes can be found in the CHANGES.txt file.
- Version upgrade to 2.2.1:
  CUPS 2.2.1 is a general bug fix release.
  See https://github.com/apple/cups/releases
  Changes include:
  * Added "CreateSelfSignedCerts" directive for cups-files.conf
    to control whether the scheduler automatically creates
    its own self-signed X.509 certificates for TLS connections
    (Issue #4876)
  * http*Connect did not handle partial failures (Issue #4870)
  * cupsHashData did not use the correct hashing algorithm
    (rdar://problem/28209220)
  * Updated man pages (PR #4885)
  A detailed list of changes can be found in the CHANGES.txt file.
- Version upgrade to 2.2.0:
  CUPS 2.2.0 adds support for local IPP Everywhere print queues
  and includes several performance and security improvements.
  See https://github.com/apple/cups/releases
  Changes include:
  * Normalized the TLS certificate validation code and added
    additional error messages to aid troubleshooting.
  * http*Connect did not work on Linux when cupsd was not running
    (Issue #4870)
  * The --no-remote-any option of cupsctl had no effect
    (Issue #4866)
  * http*Connect did not return early when all addresses failed
    (Issue #4870)
  * The IPP backend did not validate TLS credentials properly.
  * The printer-state-message attribute was not cleared after a
    print job with no errors (Issue #4851)
  * The CUPS-Add-Modify-Class and CUPS-Add-Modify-Printer
    operations did not always return an error for failed
    adds (Issue #4854)
  * PPD files with names longer than 127 bytes did not work
    (Issue #4860)
  * CUPS now supports Let's Encrypt certificates on Linux.
  * All CUPS commands now support POSIX options (Issue #4813)
  * The scheduler now restarts faster (Issue #4760)
  * Improved performance of web interface with large numbers
    of jobs (Issue #3819)
  * Encrypted printing can now be limited to only trusted
    printers and servers (rdar://problem/25711658)
  * The scheduler now advertises PWG Raster attributes for
    IPP Everywhere clients (Issue #4428)
  * The scheduler now logs informational messages for jobs
    at LogLevel "info" (Issue #4815)
  * The scheduler now uses the getgrouplist function
    when available (Issue #4611)
  * The IPP backend no longer enables compression by default
    except for certain raster formats that generally benefit
    from it (rdar://problem/25166952)
  * The scheduler did not handle out-of-disk situations
    gracefully (Issue #4742)
  * The LPD mini-daemon now detects invalid UTF-8 sequences
    in job, document, and user names (Issue #4748)
  * The IPP backend now continues on to the next job
    when the remote server/printer puts the job on hold
    (rdar://problem/24858548)
  * The scheduler did not cancel multi-document jobs immediately
    (rdar://problem/24854834)
  * The scheduler did not return non-shared printers to local
    clients unless they connected to the domain socket
    (rdar://problem/24566996)
  * The scheduler now reads the spool directory if one or more
    job cache entries point to deleted jobs
    (rdar://problem/24048846)
  * Added support for disc media sizes (rdar://problem/20219536)
  * The httpAddrConnect and httpConnect* APIs now try connecting
    to multiple addresses in parallel (rdar://problem/20643153)
  * Interface scripts are no longer supported for security reasons
    (rdar://problem/23135640)
  A detailed list of changes can be found in the CHANGES.txt file.
- Version upgrade to 2.1.4:
  CUPS 2.1.4 is a general bug fix release.
  See https://github.com/apple/cups/releases
  Changes include:
  * Fixed reporting of 1284 Device IDs (Issue #3835, PR #3836)
  * Fixed printing of multiple files to raw queues (Issue #4782)
  * The scheduler did not implement the Hold-New-Jobs opertion
    correctly (Issue #4767)
  * The cups-lpd mini-daemon incorrectly included the document-name
    attribute when creating a job.  It should only be included when
    sending a job (Issue #4790)
  A detailed list of changes can be found in the CHANGES.txt file.
- Replace krb5-devel BuildRequires with pkgconfig(krb5) on
  suse_version >= 1315: give OBS a better chance to break up build
  cycles.
- Drop cups-1.7.5-cupsEnumDests-react-to-all-for-now.diff and add
  0001-Update-cupsEnumDests-implementation-to-return-early-if-all.patch,
  0002-Save-work-on-Avahi-code.patch and
  0003-Avahi-fixes-for-cupsEnumDests.patch which is what upstream
  finally commited to cups 2.2 sources in response to
  https://github.com/apple/cups/pull/4989 in order to fix cupsEnumDests
  to react to the ALL_FOR_NOW avahi event (and also include a similar
  fix for the dnssd case). Related to bsc#955432.
- Add cups-2.1.3-cupsEnumDests-react-to-all-for-now.diff .
  Avahi sends an ALL_FOR_NOW event when it finishes sending
  its cache contents. This patch makes cupsEnumDests finish
  when the signal is received so it doesn't block the caller
  doing nothing until the timeout finishes (related to bsc#955432,
  submitted upstream at https://github.com/apple/cups/pull/4989)
- Add /etc/cups to cups-libs package [bsc#1025689]
- Replace pkgconfig(libsystemd-daemon) BuildRequires with
  pkgconfig(libsystemd) on openSUSE 13.2 and newer: the various
  sub-libraries have been merged into libsystemd since version 209.
  openSUSE 13.1 was the last product to ship systemd 208.
- Remove CUPS.desktop and pixmap
  * Obsoletes patch cups-1.3.9-desktop_file.patch
- Version upgrade to 2.1.3:
  CUPS 2.1.3 fixes some issues in the scheduler, sample drivers,
  and user commands.
  A detailed list of changes can be found in the CHANGES.txt file.
  Changes include (excerpt):
  * The scheduler should not exit under memory pressure
    (rdar://problem/23255001)
  * Fixed some issues in ipptool for skipped tests
    (rdar://problem/24137160)
  * The "lp -H resume" command did not reset the
    "job-state-reasons" attribute value (STR #4752)
  * The scheduler did not allow access to resource files
    (icons, etc.) when the web interface was disabled (STR #4755)
- Version upgrade to 2.1.2:
  CUPS 2.1.2 fixes an issue in the 2.1.1 source archives which
  actually contained a current 2.2 snapshot.
  There are no other changes.
- Version upgrade to 2.1.1:
  CUPS 2.1.1 fixes a number of USB and IPP printing issues,
  addresses some error reporting and hardening issues in
  the scheduler, and updates some localizations.
  A detailed list of changes can be found in the CHANGES.txt file.
  Changes include (excerpt):
  * Security hardening fixes (rdar://problem/23131948,
    rdar://problem/23132108, rdar://problem/23132353,
    rdar://problem/23132803, rdar://problem/23133230,
    rdar://problem/23133393, rdar://problem/23133466,
    rdar://problem/23133833, rdar://problem/23133998,
    rdar://problem/23134228, rdar://problem/23134299,
    rdar://problem/23134356, rdar://problem/23134415,
    rdar://problem/23134506, rdar://problem/23135066,
    rdar://problem/23135122, rdar://problem/23135207,
    rdar://problem/23144290, rdar://problem/23144358,
    rdar://problem/23144461)
  * The cupsGetPPD* functions did not work with IPP printers
    (STR #4725)
  * Some older HP LaserJet printers need a delayed close when
    printing using the libusb-based USB backend (STR #4549)
  * The libusb-based USB backend did not unload the kernel usblp
    module if it was preventing the backend from accessing the
    printer (STR #4707)
  * Current Primera printers were incorrectly reported as Fargo
    printers (STR #4708)
  * The IPP backend did not always handle jobs getting canceled
    at the printer (rdar://problem/22716820)
  * Added USB quirk for Canon MP530 (STR #4730)
  * The scheduler did not deliver job notifications for jobs
    submitted to classes (STR #4733)
  * Changing the printer-is-shared value for a remote queue
    did not produce an error (STR #4738)
  * The IPP backend incorrectly included the job-password
    attribute in Validate-Job requests (rdar://problem/23531939)
- add -devel to build a 32bit wine on 64bit only Leap systems.
- Version upgrade to 2.1.0:
  CUPS 2.1.0 offers improved support for IPP Everywhere,
  adds support for advanced logging using journald on Linux, and
  includes new security features for encrypted printing and
  reduced network visibility in the default configuration.
  A detailed list of changes can be found in the CHANGES.txt file.
  Changes include (excerpt):
  * Added support for 3D printers (basic types only,
    no built-in filters) based on PWG white paper.
  * The IPP backend now stops sending print data
    if the printer indicates the job has been aborted
    or canceled (rdar://problem/17837631)
  * The IPP backend now sends the job-pages-per-set
    attribute when printing multiple copy jobs with
    finishings (rdar://problem/16792757)
  * The IPP backend now updates the cupsMandatory values when the
    printer configuration changes (rdar://problem/18126570)
  * No longer install banner files since third-party banner
    filters now supply their own (STR #4518)
  * The scheduler no longer listens on the loopback
    interface unless the web interface or printer sharing
    are enabled (rdar://problem/9136448)
  * Added a PPD generator for IPP Everywhere printers (STR #4258)
  * Now install "default" versions of more configuration
    files (rdar://problem/19024491) in particular
    cups-files.conf.default and snmp.conf.default
  * Added SSLOptions values to allow Diffie-Hellman key exchange
    and disable TLS/1.0 support.
  * Updated the scheduler to support more IPP Everywhere
    attributes (STR #4630)
  * The scheduler now supports advanced ASL and journald logging
    when "syslog" output is configured (STR #4474)
  * The scheduler now supports logging to stderr when running
    in the foreground (STR #4505)
- Adapted patches so that they apply to CUPS 2.1.0 sources:
  * cups-2.1.0-choose-uri-template.patch replaces
    cups-1.2rc1-template.patch
  * cups-2.1.0-default-webcontent-path.patch replaces
    cups-1.4.3-default-webcontent-path.patch
  * cups-2.1.0-cups-systemd-socket.patch replaces
    cups-systemd-socket.patch
- Fix bnc#943950, escape the macro call %systemd-tmpfiles
  in comment.
- Add gpg verification for the tarball
- Version update to 2.0.4:
  * Fixed a bug in cupsRasterWritePixels (STR #4650)
  * Fixed redirection in the web interface (STR #4538)
  * The IPP backend did not respond to side-channel
    requests (STR #4645)
  * The scheduler did not start all pending jobs
    at once (STR #4646)
  * The web search incorrectly searched time-at-xxx
    values (STR #4652)
  * Fixed an RPM spec file issue (STR #4657)
  * The scheduler incorrectly started jobs while canceling
    multiple jobs (STR #4648)
  * Fixed processing of server overrides without
    port numbers (STR #4675)
  * Documentation changes (STR #4651, STR #4674)
- cups-2.0.3-additional_policies.patch replaces
  cups-1.7-additional_policies.patch that still adds the same
  "allowallforanybody" policy but now with separated "Limit All"
  to avoid https://www.cups.org/str.php?L4659 (boo#936309).
- Added "-p /bin/bash" to RPM shell commands scriptlets that
  enforces bash to be safe against any possible "bashisms", cf
  https://en.opensuse.org/openSUSE:Packaging_scriptlet_snippets
- Fix the previous commit by using direct systemd call and
  ensuring we work even on older distros
- Fix postin-without-tmpfile-creation and run %tmpfiles_create
  macro on our cups.conf
- Version upgrade to 2.0.3:
  The new release addresses two security vulnerabilities,
  add localizations for German and Russian, and includes several
  general bug fixes. Changes include (excerpt):
  * Security: Fixed CERT VU #810572 CVE-2015-1158 CVE-2015-1159
    exploiting the dynamic linker (STR #4609) (bsc#924208)
  * Security: The scheduler could hang with malformed gzip data
    (STR #4602)
  * Restored missing generic printer icon file (STR #4587)
  * Fixed logging of configuration errors to show up as errors
    (STR #4582)
  * Fixed potential buffer overflows in raster code and filters
    (STR #4598, STR #4599, STR #4600, STR #4601)
  * Fixed <Limit> inside <Location> (STR #4575)
  * Fixed lpadmin when both -m and -o are used (STR #4578)
  * The web interface always showed support for 2-sided printing
    (STR #4595)
  * cupsRasterReadHeader did not fully validate the raster header
    (STR #4596)
  * The rastertopwg filter did not check for truncated input
    (STR #4597)
  * The cups-lpd mini-daemon did not check for request parameters
    (STR #4603)
  * The scheduler could get caught in a busy loop (STR #4605)
  * The sample Epson driver could crash (STR #4616)
  * The IPP backend now correctly monitors jobs
    (rdar://problem/20495955)
  * The ppdhtml and ppdpo utilities crashed when the -D option
    was used before a driver information file (STR #4627)
  * ippfind incorrectly substituted "=port" for service_port.
  * The IPP/1.1 test file did not handle the initial print job
    completing early (STR #4576)
  * Fixed a memory leak in cupsConnectDest (STR #4634)
  * PWG Raster Format output contained invalid ImageBox values
    (rdar://problem/21144309)
  * Added Russian translation (STR #4577)
  * Added German translation (STR #4635)
- cups-busy-loop.patch fixed STR #4605 is obsolete because
  it is fixed upstream (see above).
- cleaned up this whole RPM changlog (wrapped too long lines if
  possible and removed trailing whitespaces).
- Add patch cups-busy-loop.patch to fix rh#1179596 , cups#4605
- Add back the posttrans cleanup script as it is needed
- Add patch cups-systemd-socket.patch to fix socket activation
  and to match socket approach Fedora has.
- Version bump to 2.0.2:
  * Security: cupsRasterReadPixels buffer overflow with invalid
    page header and compressed raster data (STR #4551)
  * Mapping of PPD keywords to IPP keywords did not work if the PPD
    keyword was already an IPP keyword (rdar://problem/19121005)
  * cupsGetPPD* sent bad requests (STR #4567)
  * For detailed list see CHANGES.txt file
- Enable PIE for build
- Remove legacy paralel-port support as it is not really needed
  as most do not want it
- Update descriptions to just state what changed and let user
  find it out.
- Add back comment about %fdupes
- Remove exit 0 on scriptlets as it is provided by
  the %service bla ones already
- Fix the comment about openSUSE version on tmpfilesdir declaration
- cups-2.0.1 update:
  * lengthy list of changes see the upstream CHANGES.txt that is
    distributed with the package
  * Disabling of sslv3 to mitigate poodle
- Use gnutls to provide SSLOPtions configuration directive
  * openssl is no longer supported upstream
  * Remove the with-openssl-exception from license
- Remove cups.sysconfig as it is not used with systemd based distros
- Purposely lose support for SLE11 as it doubles size of some of the
  sections and keep suppor for openSUSE+SLE12
  * even with the conditions we would have to go unencrypted only
    as needs newer gnutls, so don't bother with keeping the compat
- Use upstream service and socket files to allow more working tools
- Removed patches:
  * cups-0001-systemd-add-systemd-socket-activation-and-unit-files.patch
  * cups-0002-systemd-listen-only-on-localhost-for-socket-activation.patch
  * cups-0003-systemd-secure-cups.service-unit-file.patch
  * cups-1.3.6-access_conf.patch
  * cups-1.5-additional_policies.patch
  * cups-1.5.4-CVE-2012-5519.patch
  * cups-1.5.4-strftime.patch
  * cups-move-everything-to-run.patch
  * cups-polld_avoid_busy_loop.patch
  * cups-provides-cupsd-service.patch
  * str4190.patch
  * str4351.patch
  * str4450.CVE-2014-3537.str4455.CVE-2014-5029.CVE-2014-5030.CVE-2014-5031.CUPS-1.5.4.patch
- Refreshed patches:
  * cups-1.3.9-desktop_file.patch
  * cups-config-libs.patch
- Added patches:
  * cups-1.7-additional_policies.patch
  * cups-systemd-socket.patch
- change BuildRequires for systemd to pkgconfig(systemd)
  and pkgconfig(libsystemd-daemon) to avoid build-cycles
- Version upgrade to 1.7.5:
  CUPS 1.7.5 addresses some minor issues and expands upon the
  symlink security protection. Changes include (excerpt):
  * Security: Addressed some more situations where symlinked
    files would be served by the web interface (CVE-2014-5029
    CVE-2014-5030 CVE-2014-5031 STR #4455 and bnc#887240).
  * The LPD backend did not work with some versions
    of glibc (STR #4452)
  * CGI scripts did not work (STR #4454)
- str4455-1.7.patch (see the previous entry below)
  is obsolete because it is fixed upstream since CUPS 1.7.5.
- Let fdupes only create symlinks in /usr/share/cups/templates/ to
  avoid a symlink /usr/share/cups/webcontent/images/cups-icon.png
  because since CUPS 1.7.4/1.7.5 the cupsd web server does
  no longer follow symlinks to avoid the security issues
  mentioned in the previous two entries below
  (fixes bnc#892587 a regression of bnc#887240).
- str4455-1.7.patch complements the incomplete fix for
  CVE-2014-3537 STR#445 in the CUPS 1.7.4 sources
  to fix the subsequent CVE-2014-5029 CVE-2014-5030
  CVE-2014-5031 STR#4455 (bnc#887240).
- Version upgrade to 1.7.4:
  CUPS 1.7.4 fixes several networking and build issues,
  and addresses a symlink security issue CVE-2014-3537.
  Changes since 1.7.3 include (excerpt):
  * Security: The web interface incorrectly served symlinked files
    and files that were not world-readable, potentially leading to
    a disclosure of information (CVE-2014-3537, STR #4450,
    and bnc#887240).
  * The "snmp" option did not work with the network backends
    (STR #4422).
  * The User directive in client.conf did not override the USER
    environment variable (STR #4426).
  * The web interface now properly shows a "Go" button for
    all text-based browsers (STR #4425).
  * The MaxJobTime directive now properly supports time
    values (STR #4434).
  * Fixed an "IPP read error" race condition issue (STR #4440).
- Version upgrade to 1.7.3:
  CUPS 1.7.3 includes a number of general bug fixes.
  Changes since 1.7.2 include (excerpt):
  * Fixed mapping of OutputBin values such as "Tray1".
  * Several ippGet* functions incorrectly returned -1
    instead of 0 on error.
  * Fixed an authentication race condition in
    cupsSendRequest (STR #4403).
  * The scheduler did not add the "job-hold-until-specified"
    reason when holding a job using the lp command (STR #4405).
  * Auto-typing of PWG Raster files did not work (STR #4417).
  * IPP queues using hardcoded credentials would ask
    for credentials (STR #4371).
- Version upgrade to 1.7.2:
  CUPS 1.7.2 addresses a web interface redirection security issue,
  some scheduler crashed on Linux, and other general bug fixes.
  Changes since 1.7.1 include (excerpt):
  * CVE-2014-2856: The scheduler now blocks URLs containing
    embedded HTML (STR #4356 and bnc#873899).
  * cupsDoIORequest could miss the server status, causing failed
    lpadmin and other administrative commands (STR #4386).
  * Fixed a D-BUS threading issue that caused the scheduler
    to crash (STR #4347).
  * The scheduler now automatically reconnects to Avahi
    as needed (STR #4370, STR #4373).
- str4351.patch that fixed STR #4351: cups-lpd hugh jobs (>2G) fail
  is obsolete because it is fixed upstream since CUPS 1.7.2.
- Removed the CUPS banner files in /usr/share/cups/banners/ and
  the CUPS testpage /usr/share/cups/data/testprint (which is also
  a CUPS banner file type) because they do no longer work
  since CUPS >= 1.6 (see http://www.cups.org/str.php?L4120)
  because there is no longer a filter for Linux that can convert
  the CUPS banner files. Since CUPS >= 1.6 only the banner files
  and testpage in the cups-filters package work via the
  cups-filters PDF workflow and the cups-filters package also
  provides the matching bannertopdf filter (bnc#873376).
- In case of systemd use --with-rundir=/run/cups
  instead of --with-rundir=/run (bnc#871640).
- str4351.patch from CUPS upstream fixes
  https://www.cups.org/str.php?L4351
  "STR #4351 cups-lpd hugh jobs (>2G) fail"
  (bnc#864782).
- Version upgrade to 1.7.1 (fate#314630):
  CUPS >= 1.6 has major incompatible changes compared to CUPS
  up to version 1.5.4 in particular when printing via network:
  * The IPP protocol default version increased form 1.1 to 2.0.
    Older IPP servers like CUPS 1.3.x (e.g. in SLE11)
    reject IPP 2.0 requests with "Bad Request" (STR #4231).
    By adding '/version=1.1' to ServerName in client.conf
    (e.g. ServerName older.server.example.com/version=1.1)
    or the CUPS_SERVER environment variable value or by
    adding it to the server name value of the '-h' opion
    (e.g. lpstat -h older.server.example.com/version=1.1 -p)
    the older IPP protocol version for older servers
    must be explicitly specified.
  * CUPS Browsing is dropped in CUPS but the new package
    cups-filters provides the cups-browsed that provides
    basic CUPS Browsing and Polling functionality.
    The native protocol in CUPS for automatic client discovery
    of printers is now DNS-SD.
  * Some printing filters and backends are dropped in CUPS
    but the new package cups-filters provides them so that
    cups-filters is usually needed (recommended by RPM)
    but cups-filters is not strictly required.
  * The cupsd configuration directives are split into two files
    cupsd.conf (can also be modified via HTTP PUT e.g. via cupsctl)
    and cups-files.conf (can only be modified manually by root)
    to have better default protection against misuse of privileges
    by normal users who have been specifically allowed
    by root to do cupsd configuration changes
    (STR #4223 CVE-2012-5519 bnc#789566).
  See the entries below for more information.
  For details see the openSUSE Bugzilla bnc#735404 issue.
  CUPS 1.7.1 improves network and USB printing, fixes some
  scheduler issues, and addresses a minor security issue
  in the lppasswd program.
  Changes since 1.7.0 include (excerpt):
  * Security: the lppasswd program incorrectly used settings
    from ~/.cups/client.conf (STR #4319)
  * ATTR messages could cause string pool memory corruption
    in the scheduler (rdar://problem/15382819)
  * Printing to a raw queue could result in corrupt output
    due to opportunistic compression (rdar://problem/15008524)
  * Japanese PPDs using with the Shift-JIS encoding
    did not work (rdar://problem/15427759)
  * The libusb-based USB backend incorrectly used write
    timeouts (rdar://problem/15564888)
  * The IPP backend did not wait for a busy printer
    to become available before attempting to print
    (rdar://problem/15465667)
  * Using "@IF(name)" in an Allow or Deny rule
    did not work (STR #4328)
  * The D-BUS notifier did not remove its lockfile (STR #4314)
  * CUPS incorrectly used the USER environment variable when
    the name did not match the user ID (STR #4327)
  For details see the CHANGES.txt file.
- cups-1.7-additional_policies.patch adds the 'allowallforanybody'
  policy to cupsd.conf (fate#303515) and replaces
  cups-1.6.2-adapt_cupsd.conf_defaults_for_SUSE.patch
- Clean up of systemd unit files (bnc#857372):
  Make it working again as simple and secure as it worked
  all the time in the past by providing only one single
  systemd unit file cups.service. In particular currently YaST
  cannot manage services with additional other systemd unit files.
  Furthermore systemd socket activation is currently insecure
  in case of IPv6 (CVE-2012-6094 bnc#795624).
- Clean up how cupsd is launched (via SysVinit or systemd)
  by maintaining strictly separated sections in cups.spec:
  Either for launching cupsd via systemd (if have_systemd is set)
  or for launching cupsd via SysVinit (if have_systemd is not set).
  SysVinit support cannot be removed because CUPS 1.7.1 still
  builds and can be used even for SLE11.
- The default group of users who are allowed to do cupsd
  configuration changes via requests to the running cupsd
  (i.e. the SystemGroup directive in cupsd.conf) is set
  to 'root' only (related to STR #4223 CVE-2012-5519 bnc#789566).
  In this context a general security advice:
  When root allows normal users to do system administration tasks
  (in particular when root allows normal users to administer
  system processes - i.e. processes that run as root), then
  this or that kind of privilege escalation will be possible.
  Only trustworthy users who do not misuse their privileges
  may get allowed to do specific system administration tasks.
- Version upgrade to 1.7.0
  CUPS >= 1.6 has major incompatible changes compared to CUPS 1.5.
  See the entries below for more information.
  For details see the openSUSE Bugzilla bnc#735404 issue.
  Changes since 1.7rc1 include (excerpt):
  * The lpadmin command did not send the PPD name from
    the "-m" option (rdar://problem/15264697).
  * The scheduler did not respond using the hostname
    specified by the client (rdar://problem/14583574).
  * Fixed a couple memory leaks in ippfind that were
    reported by Clang.
  * Fixed a compile issue on 64-bit Linux with Clang - need
    to use the -pie option instead of -Wl,-pie now
    (rdar://problem/14480938).
  * The scheduler incorrectly did not pass a FINAL_CONTENT_TYPE
    environment variable to the filters or backend
    (rdar://problem/14355011).
  For details see the CHANGES.txt file.
- Version upgrade to 1.7rc1 only for testing purpose.
  CUPS >= 1.6 has major incompatible changes compared to CUPS 1.5.
  After a version upgrade to CUPS >= 1.6 printing in the network
  would no longer work as it did up to CUPS 1.5.
  For details regarding incompatible changes in CUPS >= 1.6 see
  https://bugzilla.novell.com/show_bug.cgi?id=735404
  and follow the links therein.
  The 1.7 series is primarily a "polish" release with improved
  support for paid, PIN, and release printing, expanded support
  for IPP Everywhere, automatic support for data compression,
  and improved CUPS APIs.
  CUPS 1.7rc1 is the first release candidate for CUPS 1.7.0
  and includes the fixes from CUPS 1.6.3, adds a new
  ippfind utility, fixes some issues in the ipptool utility,
  and fixes some general printing bugs.
  For details what is new in CUPS 1.7 see the CHANGES.txt file.
  Excerpt:
  * Printer xxx-default values were not reported by
    Get-Printer-Attributes or lpoptions (rdar://problem/14401795)
  * Added a new ippfind tool for finding IPP printers and
    other Bonjour services (rdar://problem/13876199)
- Version upgrade to 1.6.3
  CUPS 1.6.3 fixes some compatibility issues with servers
  running CUPS 1.3.12 or older, fixes some general printing bugs,
  and fixes some minor security issues.
  For details what is new in CUPS 1.6 see the CHANGES-1.6.txt file.
  Excerpt:
  * The lp, lpq, lpr, and lpstat now display an error message
    advising the use of the /version=1.1 ServerName option
    (rdar://problem/14290628)
  * Added documentation about the /version=1.1 option to ServerName
    in client.conf (rdar://problem/14216262)
  * The lp, lpq, lpr, and lpstat commands incorrectly ignored
    the default printer set in the lpoptions file
    (rdar://problem/14216472)
  * Printing using "ipps" URIs was not encrypted.
- Version upgrade to 1.6.2.
  CUPS 1.6 has major incompatible changes compared to CUPS 1.5.
  For details regarding incompatible changes in CUPS 1.6 see
  https://bugzilla.novell.com/show_bug.cgi?id=735404
  and follow the links therein.
  For details what is new in CUPS 1.6 see the CHANGES.txt file.
  Excerpt:
  * Security: All file, directory, user, and group settings
    are now stored in a separate cups-files.conf configuration
    file that cannot be set through the CUPS web interface
    or APIs (STR #4223).
  * The IPP backend could crash if the printer disconnects
    early (STR #4284).
  * cupsGetPPD did not work with statically-configured CUPS
    shared queues (STR #4178).
  * Bad IPP responses could crash ipptool (STR #4262).
  * Updated USB quirk rules for various printers
    (STR #4217, STR #4263, STR #4286).
  * Added USB blacklisting for printers that require a custom
    backend (STR #4218).
  * The CUPS library did not always detect a timed out connection
    to the server which could cause temporary loss of printing
    from applications (STR #4187).
  * The IPP backend now stops queues when the server configuration
    prevents successful job submission (STR #4125).
  * CUPS 1.6 clients using the ServerName directive in client.conf
    did not work with CUPS 1.3.x or older servers
    (STR #4231, STR #4291).
  * The scheduler could crash when using Avahi
    (STR #4183, STR #4192, STR #4200, STR #4213).
  * The IPP backend could get stuck in an endless loop on certain
    network errors (STR #4194).
  * The scheduler no longer allows job-name values that are
    not valid network Unicode strings (STR #4072).
  * The network backends now support disabling of SNMP supply
    level queries via the "snmp" URI option (STR #4106).
  * The IPP backend did not specify the compression used
    (STR #4181).
  * The scheduler did not recognize dnssd: or ipps: URIs as
    Bonjour shared queues (STR #4158).
  * Applications could not get the PPD file for
    statically-configured Bonjour-shared print queues (STR #4159).
  * Fixed a USB backend compatibility issue on systems using
    libusb (STR #4155, STR #4191).
  * Some Bonjour features were not available on systems
    with Avahi (STR #4156).
- cups-1.6.1-revertSTR3929_to_default_IPP_1.1_again.patch is
  obsolete because it is fixed upstream (STR #4231, STR #4291).
- cups-1.6.2-adapt_cupsd.conf_defaults_for_SUSE.patch
  replaces cups-1.6.1-adapt_cupsd.conf_defaults_for_SUSE.patch
- Adapted cups-client.conf template file for CUPS 1.6.
- cups-1.6.1-adapt_cupsd.conf_defaults_for_SUSE.patch
  adapts the defaults in cupsd.conf for SUSE.
  It replaces cups-1.3.6-access_conf.patch that
  added 'Allow 127.0.0.2' to cupsd.conf to allow access
  for the loopback IP address 127.0.0.2 which is set for
  the hostname by SUSE in /etc/hosts at least up to
  SLE10 products.
  It also replaces cups-1.5-additional_policies.patch
  that added the 'allowallforanybody' policy to cupsd.conf
  see https://fate.novell.com/303515
  Furthermore it fixes some issues with the CUPS upstream
  defaults i.e. removal of no longer supported keywords
  BrowseOrder BrowseAllow DefaultAuthType (otherwise cupsd
  prints error messages of the form "Unknown directive
  BrowseOrder on line 22").
- cups-1.6.1-revertSTR3929_to_default_IPP_1.1_again.patch
  reverts the incompatible change in CUPS 1.6
  that makes IPP version 2.0 default
  (see https://www.cups.org/str.php?L3929)
  back to using IPP version 1.1 by default.
  Otherwise CUPS 1.6 on clients cannot talk to older CUPS
  servers in particular not to CUPS 1.3.9 on SLE11.
  E.g. on a CUPS 1.6 client "lpstat -h sle11.cups.server -p"
  would fail on the client with "lpstat: Bad Request" and
  the CUPS 1.3.9 server logs in /var/log/cups/error_log the
  lines "E ... cupsdReadClient: ... IPP Read Error!"
  and "D ... cupsdSendError: ... code=400 (Bad Request)".
- Version upgrade to 1.6.1.
  CUPS 1.6 has major incompatible changes compared to CUPS 1.5.
  After a version upgrade to CUPS 1.6 printing in the network
  would no longer work as it did up to CUPS 1.5.
  For an overview about what is new in CUPS 1.6 see
  http://www.cups.org/documentation.php/doc-1.6/whatsnew.html
  For details regarding incompatible changes in CUPS 1.6 see
  https://bugzilla.novell.com/show_bug.cgi?id=735404
  and follow the links therein.
  For details what is new in CUPS 1.6 see the CHANGES.txt file.
  Excerpt:
  * CUPS now supports color management using colord (STR #3808).
  * CUPS now supports Bonjour using Avahi (STR #3066).
  * The "brightness", "columns", "fitplot", "gamma", "hue",
    "natural-scaling", "penwidth", "position", "ppi",
    "saturation", and "scaling" options are not longer
    supported (STR #4010).
  * Added new destination connection and enumeration functions
    via new dynamic destination APIs (STR #3924).
  * Added new option, localization, and job submission functions
    via new APIs that do not depend on PPD files (STR #3925).
  * The scheduler now supports a DefaultAuthType of "auto" to
    automatically choose between Basic (username/password)
    and Negotiate (Kerberos) authentication.
  * CUPS no longer supports automatic remote printers or
    implicit classes via the CUPS, LDAP, or SLP protocols
    (STR #3922, STR #3923).
  * The PPD APIs are now deprecated and will be removed
    in a future version of CUPS (STR #3927).
  * The default IPP version for requests is now 2.0 (STR #3929).
  * The IPP APIs no longer expose the ipp_t or ipp_attribute_t
    structures and instead provide accessor functions (STR #3928).
  * The scheduler will no longer run programs with group write
    permission.
  * The PHP module has been removed (STR #3932).
  * The bannertops, commandtoescpx, commandtopclx, imagetops,
    imagetoraster, pdftops, rastertoescpx, rastertopclx,
    and texttops filters have been removed (STR #3930).
  * The serial and parallel backends have been removed (STR #3935).
- Adapted cups-config-libs.patch for CUPS 1.6.1
  (IMGLIBS is no longer present in cups-config.in).
- buildrequire systemd through the pkgconfig provide to get
  systemd-mini in build environment (to break cycle)
- Version upgrade to 1.5.4 (mainly a bugfix release) that fixes
  some IPP printing issues.
  Excerpt:
  * The IPP backend no longer tries to get the job status for
    printers that do not implement the required operation
    (STR #4083).
  * Sending a document in an unsupported format to an IPP printer
    now automatically cancels the job (STR #4093).
  * The IPP backend now treats the client-error-not-possible
    status code as a job history issue, allowing IPP printing to
    Windows to work(STR #4047).
  For a complete list see the CHANGES.txt file.
- revert_cups-ssl.m4_to_1.5.2.patch is now obsolete because of
  an upstream fix.
- license update: SUSE-GPL-2.0-with-openssl-exception and LGPL-2.1
  Apple grant an openssl linking exception (and an exception for
  linking on Apple owned operating systems).
- Save /etc/cups/cupsd.conf and /etc/cups/cupsd.conf.default
  from becoming hardlinked via the fdupes run in cups.spec
  (see the 'Wed Aug 26 21:43:03 CEST 2009' entry below)
  by making their content different and at the same time
  fix the misleading comment (openSUSE Bugzilla bnc#773971).
- Minor clean-up in cups.spec (the "Remove unpackaged files"
  via "rm -rf ") is no longer needed because
  those man pages are no longer installed.
- Upgraded to CUPS 1.5.3 (mainly a bugfix release) that fixes
  a number of PostScript, SSL, authenticated printing,
  and networking issues.
  Excerpt:
  * The scheduler could crash if a PPD file contained
    an invalid paper size (STR #4049).
  * Missing localizations caused empty output (STR #4033).
  * Changed how timeouts are implemented in the LPD backend
    (STR #4013).
  * The default InputSlot setting was never used (STR #3957).
  * Fixed the IPP backend's handling of HTTP/1.0 compatibility
    (STR #3988).
  For a complete list see the CHANGES.txt file.
- revert_cups-ssl.m4_to_1.5.2.patch reverts cups-ssl.m4 to what
  it was in CUPS 1.5.2 so that autoconf produces a syntactically
  correct configure script otherwise "bash -n configure" fails
  with "syntax error: unexpected end of file",
  see http://www.cups.org/str.php?L4084
- No longer require Ghostscript but only "Recommends: ghostscript"
  because the Ghostscript device "cups" is needed by several CUPS
  filters (in particular the "rasterto..." filters) but those
  filters are not used on all systems (e.g. on a print server
  with only "raw" queues) so that a weak Recommends fits better.
  Furthermore this avoids a build dependency cycle between the
  main-packages cups and ghostscript.
- No longer require /usr/bin/pdftops but only a "Recommends"
  because the CUPS filter /usr/lib/cups/filter/pdftops
  (which calls /usr/bin/pdftops) is not used on all systems
  (e.g. on a print server with only "raw" queues) so that
  a weak Recommends fits better.
- In cups.spec only "Requires: ghostscript" but no longer require
  ghostscript-fonts-std in cups.spec because in ghostscript.spec
  there is already "Requires: ghostscript-fonts-std"
  (related to openSUSE Bugzilla bnc#735824).
- In cups.spec remove the Obsoletes/Provides cups-SUSE-ppds-dat
  because cups-SUSE-ppds-dat.rpm existed only up to SLE10
  but it does no longer exist since 11.1/SLE11
  and CUPS 1.5.x is not provided for SLE10.
- Use traditional bash scriptlets for post/postun with
  an explicite "exit 0" line at the end to be fail safe and
  therefore also "PreReq: /sbin/ldconfig" explicitly for the
  cups-libs sub-package, see the "Shared_libraries" section in
  http://en.opensuse.org/openSUSE:Packaging_scriptlet_snippets
- Upgraded to CUPS 1.5.2 (mainly a bugfix release). This release
  fixes a number of printing, encryption, and ipptool issues.
  Excerpt:
  * The scheduler incorrectly used free() on a POSIX ACL value,
    which could cause a crash (STR #3970).
  * Encryption was broken with OpenSSL (probably STR #3933
    and bnc#739410 ).
  * Badly formed GIF files could cause the image filters
    to crash (STR #3914).
  For a complete list see the CHANGES.txt file.
- Use explicit buildrequires on the needed libraries.
  otherwise build will fail after libtiff-devel deps cleanup
- Cleanup requires of -devel package, which only needs glibc-devel
- cups-config-libs.patch fixes cups-config script,
  which with option --libs adds:
  LIBS="-lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lssl -lcrypto
  - lz -lpthread -lm -lcrypt "
  IMGLIBS="-ltiff -ljpeg -lpng"
  This only makes sense when using static linking but we do not
  ship static libraries and it will only bloat dependant packages.
- Update systemd patch, Bind to datagram socket as well in
  systemd cups.socket unit file, to prevent that port being
  stolen by another service (from RH).
- There is no need to use -fno-strict-aliasing
  in cflags any longer.
- Update systemd patch to a newer version that uses
  libsystemd-daemon instead of bundling sd-daemon wrappers.
- cups-0001-systemd-add-systemd-socket-activation-and-unit-files.patch
  adds complete systemd support, the hardware stuff is handled in
  builtin udev rules (see /lib/udev/rules.d/99-systemd.rules).
  See also http://0pointer.de/blog/projects/socket-activation2.html
- Upgraded to CUPS 1.5.0 (openSUSE Bugzilla bnc#722057)
  Backward incompatible changes:
  * The main header cups/cups.h no longer includes the PPD header
    cups/ppd.h which may require code changes to applications.
  * CUPS no longer supports the old ~/.cupsrc or ~/.lpoptions files
    from CUPS 1.1.x. The ~/.cups/client.conf and ~/.cups/lpoptions
    files that were introduced in CUPS 1.2 must now be used.
  * The scheduler now requires that filters and backends
    have group write permissions disabled (security).
  * The HP-GL/2 filter is no longer included (STR #3322).
  * The SCSI backend is no longer included (STR #3500).
  Other changes:
  * Updated the PostScript filter to support IncludeFeature
    in more circumstances (STR #3417).
  * The scheduler now sets the process group for child processes
    and manages the group (STR #2829).
  * The scheduler now more carefully creates and removes
    configuration, cache, and state files (STR #3715).
  * The lpadmin command now allows default option values
    to be deleted (STR #2959).
  * Restored support for GNU TLS and OpenSSL with threading
    enabled (STR #3605, STR #3461).
    Therefore cups-1.4.4-str3461-1.4.reverted.patch
    is no longer needed (openSUSE Bugzilla bnc#617026).
  * Increased the default RIPCache value to 128MB (STR #3535).
    Therefore cups-1.4.4-set_default_RIPCache_128m.patch
    is no longer needed (openSUSE Bugzilla bnc#628233).
  * Updated PDF filter to support Ghostscript ps2write (STR #3766).
  * Updated PDF filter to support Poppler option to preserve page
    sizes in PDF files when the user has not selected a particular
    media size (STR #3689).
  * Added new PWG Raster filter for IPP Everywhere printer support.
  * Added support for a new cupsFilter2 keyword in PPD files
    to allow for the propagation of the actual MIME media type
    produced by a filter.
  * Name resolution errors no longer no longer cause
    queues to stop (STR #3719, STR #3753). See also
    https://bugzilla.novell.com/show_bug.cgi?id=337794#c16
  * Added a new cups-exec helper program that applies security
    profiles to filters, port monitors, backends, CGI programs,
    and mini-daemons.
  * The web interface can now be disabled using the WebInterface
    directive in cupsd.conf (STR #2625).
  * The ipptest tool is now a first-class user program (STR #3484).
  For a complete list see the CHANGES.txt file.
- cups-1.4.4-str3461-1.4.reverted.patch (bnc#617026) and
  cups-1.4.4-set_default_RIPCache_128m.patch (bnc#628233)
  are no longer needed because the issues are fixed upstream.
  cups-1.5-additional_policies.patch (fate#303515) replaces the
  cups-1.4-additional_policies.patch which does no longer apply.
- add libtool as buildrequire to make the spec file more reliable
- Reverted the change from meissner below dated
  "Fri Sep 23 09:54:39 CEST 2011" so that baselibs.conf again
  contains only one line "cups-libs" as before because the
  submitrequest 85423 Printing/cups -> openSUSE:Factory/cups
  was declined by coolo with the following reason:
  "cups-devel-32bit requires cups-32bit (default requires),
  which does not exist".
- Upgraded to CUPS 1.4.8
  * network backends could crash if a printer returned a value
    of 0 for the maximum capacity for a supply (STR #3875)
  * For a complete list see the CHANGES.txt file.
- Upgraded to CUPS 1.4.7
  * imageto* filters could crash with bad GIF files (STR #3867)
  * CUPS did not work with some printers that incorrectly
    implemented the HTTP/1.1 standard (STR #3778, STR #3791)
  * Fixed crash in scheduler when the application/octet-stream
    MIME type was not defined (STR #3690)
  * The web interface no longer tries to use multi-part delivery
    when adding printers (STR #3455) using Epiphany or IE
  * "lp" and "lpr" failed with Kerberos enabled (STR #3768)
  * Remote printer URIs with options did not work (STR #3717)
  * The scheduler now only looks up interface hostnames
    if HostNameLookups are enabled (STR #3737)
  * The scheduler could crash if a browsed printer times out
    while a job is printing (STR #3754)
  * For a complete list see the CHANGES.txt file.
- cups-1.4.4-set_default_RIPCache_128m.patch enlarges
  the CUPS upstream default RIPCache from 8m to 128m
  to avoid various kind of printout failures
  (STR #3535, and Novell/openSUSE Bugzilla bnc#628233).
- cups-devel baselibs package for Wine 32bit on 64bit building
  (added "cups-devel requires cups-libs..." to baselibs.conf).
- Remove redundant tags/sections from specfile
  (removed "norootforbuild" and the "clean" section).
- "no" locale is "nb" (norwegian bokmal) these days
  (move /usr/share/locale/no to /usr/share/locale/nb).
- "zh" is probably meant as "zh_CN", as "zh_TW" exists
  (move /usr/share/locale/zh to /usr/share/locale/zh_CN).
- Cleaned up the RPM Requires:
  Removed the needless "Suggests: poppler-tools" because there
  is "Requires: /usr/bin/pdftops" which should be sufficient.
  Replaced the RPM Requires for foomatic-filters by Recommends
  because foomatic-rip is only needed by CUPS in a few cases
  and printer driver packages which need foomatic-rip require
  foomatic-filters on their own.
- Upgraded to CUPS 1.4.6
  CUPS 1.4.6 fixes in particular a regression:
  * A change was made in CUPS 1.4.5's pstops filter
    that it did not support landscape printing
    of PostScript files (STR #3722)
  * For a complete list see the CHANGES.txt file.
- Fixed coolo's quick and ditry unconditioned
  "PreReq: sysvinit(syslog)" stuff from below because build fails
  everywhere except openSUSE:Factory (i.e. openSUSE 11.4)
  because sysvinit(syslog) is nowhere else provided.
  Now the PreReq is only if suse_version > 1130.
- prereq init script syslog
-  Upgraded to CUPS 1.4.5
  CUPS 1.4.5 fixes several scheduler and printing bugs
  as well as a reported security bug, in particular:
  * Fixed a IPP parsing memory corruption bug
    (CVE-2010-2941, STR #3648, Novell/Suse Bugzilla bnc#649256)
  * Fixed a PPD loader bug that could crash the cupsd (STR #3680)
  * The scheduler restarts jobs while shutting down (STR #3679)
  * Did not initialize Kerberos in all cases (STR #3662)
  * The socket backend could go into an infinite loop
    with certain printers (STR #3622)
  * Moving a job via the web interface failed without
    asking for authentication (STR #3559)
  * The web interface did not allow a user to change
    the driver (STR #3537, STR #3601)
  * For a complete list see the CHANGES.txt file.
- Fixed /etc/init.d/cups (cups.init source file) so that stopping
  the cupsd waits up to 10 seconds until the cupsd had actually
  finished (if not SIGKILL would be sent to it) to make sure
  that "rccups restart" and "rccups stop ; rccups start" work
  correctly (see Novell/Suse Bugzilla bnc#622058).
- cups-1.4.4-str3461-1.4.reverted.patch reverts changes
  by CUPS STR #3461 as band-aid workaround for now to avoid
  that Mozilla.org applications crash when they try to print
  (STR #3461, STR #3605, and Novell/Suse Bugzilla bnc#617026).
- Upgraded to CUPS 1.4.4
  CUPS 1.4.4 fixes several security, scheduler, printing,
  and conformance issues, in particular:
  * The web interface now includes additional CSRF protection
    (CVE-2010-0540, STR #3498, STR #3593, and
    Novell/Suse Bugzilla bnc#601830)
  * The texttops filter did not check the results of allocations
    (CVE-2010-0542, STR #3516, Novell/Suse Bugzilla bnc#601352)
  * The web admin interface could disclose the contents of memory
    (CVE-2010-1748, STR #3577, Novell/Suse Bugzilla bnc#604271)
  * The fix for CVE-2009-3553 (STR #3200) was incomplete
    for systems that use kqueue or epoll (STR #3490)
  * CUPS could overwrite files as root in directories owned or
    writable by non-root users (STR #3510)
  * The OpenSSL interfaces have been made thread-safe and
    the GNU TLS interface is explicitly forbidden
    when threading is enabled (STR #3461)
  * The scheduler could crash on restart if classes
    were defined (STR #3524)
  * The socket backend no longer waits for back-channel data
    on platforms other than Mac OS X (STR #3495)
  * For a complete list see the CHANGES.txt file.
- Update cups-1.3.9-desktop_file.patch: add the Settings category
  (required since we use HardwareSettigns) and add NotShowIn=GNOME:
  in GNOME, the configuration tool we want to use is
  system-config-printer.
- Explicitly set configure option '--enable-debug' because
  otherwise the cups-debuginfo RPM would be empty.
- Removed no longer recognized configure option '--enable-pie'
  (it compiles and links with '-pie -fPIE -fPIC' by default).
- Disabled .SILENT in Makedefs.in so that make is verbose as usual.
- In cups.spec removed '-r' from the suse_update_desktop_file call
  to not replace valid (and previously patched via
  cups-1.3.9-desktop_file.patch) categories of the desktop file
  so that it shows up in the right place (this is particularly
  an issue with the LXDE/XFCE menu).
- cups-1.4.3-default-webcontent-path.patch changes the default path
  whereto the web content is installed from /usr/share/doc/...
  to /usr/share/cups/webcontent because the files of the CUPS
  web content are no documentation (see CUPS STR #3578 and
  Novell/Suse Bugzilla bnc#546023 starting at comment#6).
- In cups.spec replaced usage of the RPM macro 'name' by the
  explicite value 'cups' (except for the BuildRoot) so that
  CUPS could be built as well with a different package name
  (e.g. when someone likes to provide a CUPS SVN revision
  as 'cupsSVN' or a specifically adapted CUPS as 'cups4me').
- cups-krb5-config wrapper script for krb5-config is no longer
  needed because since April 2008 krb5-config works correctly
  (see Novell/Suse Bugzilla bnc#378270 and compare STR #3556).
- In cups.xinetd replaced '@LIB@' by '/usr/lib' and removed
  the perl substitute calls regarding '@LIB@' in cups.spec because
  since the upstream compliant CUPS 1.4 it is '/usr/lib/cups/'
  on all platforms (see Novell/Suse Bugzilla bnc#575544).
- Upgraded to CUPS 1.4.3:
  * The scheduler could try responding on a closed client
    connection, leading to a crash
    (CVE-2009-3553, STR #3200, and bnc#554861).
  * The lppasswd program allowed the localization files
    to be overridden when running in setuid mode
    (CVE-2010-0393, STR #3482, and bnc#574336).
  * The scheduler would crash when an active printer was deleted.
  * The DBUS notifier did not build (STR #3447).
  * The scheduler did not reset the SIGPIPE handler
    of child processes (STR #3399).
  * For a complete list see the CHANGES.txt file.
- cups-1.3.9-CVE-2009-3553.patch has become
  obsolete because it is fixed in the source.
- CUPS 1.3 -> 1.4 version upgrade and major cleanup:
  For the CUPS upstream changes see the CHANGES.txt file.
  Such a major version upgrade is the perfect chance
  to drop almost all our own patches to enforce a
  reset to almost 100% compliance with upstream.
  Here our openSUSE CUPS versions and their number of patches
  (i.e. the "Patch" entries in the cups.spec files):
    CUPS version 1.2.12 in openSUSE 10.3: 37
    CUPS version 1.3.7  in openSUSE 11.0: 29
    CUPS version 1.3.9  in openSUSE 11.1: 26
    CUPS version 1.3.11 in openSUSE 11.2: 17
  Of course this includes patches with backported bug fixes
  via our maintenance but nevertheless there were really
  too much openSUSE specific patches.
  Therefore I would like to provide CUPS 1.4 "as is" to the
  furthest possible extent (there are still 6 patches left).
  Then let's see if we get bug reports because of this.
  I did such a reset to 100% compliance with upstream
  already in the past for sane-backends and guess what:
  I got no single bug report at all because of this.
  I guess what they do at upstream is actually not so bad ;-)
- Added the explicite path to '--with-cachedir=/var/cache/cups'
  in cups.spec to avoid that the fallback value 'yes' results
  the cache directory '/etc/cups/yes/'.
- cups-1.3.11-CVE-2009-2820-regression-fix.patch and
  cups-1.3.11-CVE-2009-2820.patch have become
  obsolete because it is fixed in the source.
- cups-1.4-full_path_to_configure_with-pdftops.patch has become
  obsolete because it is fixed in the source.
- add baselibs.conf as a source
- enable parallel building
- Fixed the URL and MD5 sum comments for Source0 in cups.spec.
- cups-1.3.9-CVE-2009-3553.patch fixes a use-after-free bug
  in the scheduler which leads to remote denial of service,
  (CVE-2009-3553, CUPS STR #3200,
  and Novell/Suse Bugzilla bnc#554861)
- cups-1.3.11-CVE-2009-2820-regression-fix.patch
  fixes a regression which was introduced by
  the previous cups-1.3.11-CVE-2009-2820.patch
  which lets adding a class via CUPS Web Interface fail
  with an 'Unknown operation "{op}"' error message
  (CUPS STR #3401 and
  Novell/Suse Bugzilla bnc#548317 starting at comment #24).
- cups-1.3.11-CVE-2009-2820.patch fixes CUPS Web Interface
  Cross-Site Scripting (XSS) and CRLF injection in HTTP headers
  (CVE-2009-2820 and CUPS STR #3367 and
  Novell/Suse Bugzilla bnc#548317).
- updated patches to apply with fuzz=0
- Fixed as-needed issues when compiling additional tools
  by using the right ordering of source and linked library
  in 'gcc -opoll_ppd_base ... SOURCE1 -lcups'
  and 'gcc -olphelp ... SOURCE2 -lcups' which
  obsoletes the 'export SUSE_ASNEEDED=0' workaround,
  see the 'Fri Jul 10 12:34:54 CEST 2009' entry below.
- Run fdupes.
- full_path_to_configure_with-pdftops.patch
  adds support to specify a full path in
  'configure --with-pdftops=/usr/bin/pdftops'
  to avoid 'BuildRequires: xpdf-tools' which would
  bloat the build system but would be only needed to
  satisfy 'AC_PATH_PROG(CUPS_PDFTOPS, pdftops)'
  in cups-pdf.m4 if only 'configure --with-pdftops=pdftops'
  was possible (Novell/Suse Bugzilla bnc#526847).
- Upgraded to CUPS 1.3.11:
  * The scheduler and cupsfilter utility would crash with
  certain MIME .types rules (CUPS STR #3159).
  * cups-1.3.10-fix-DNS-rebinding-protection.patch
  (Novell/Suse Bugzilla bnc#516511 and CUPS STR #3238)
  is obsolete since CUPS 1.3.11 because it is fixed
  in the source (it is fixed via CUPS STR #3164).
  * For a complete list see the CHANGES.txt file.
- Set 'export SUSE_ASNEEDED=0' in cups.spec because build fails
  with --as-needed so that this is for now simply disabled.
- cups-1.3.10-fix-DNS-rebinding-protection.patch fixes
  a regression of the CUPS 1.3.10 DNS rebinding protection which
  lets e.g. "lpoptions -h localhost -p <queue> -l" fail with
  "lpoptions: Unable to get PPD file for <queue>: Bad Request"
  and in /var/log/cups/error_log there is the warning
  W ... Request from "localhost" using invalid Host: field "::1"
  but "::1" is the IPv6 loopback IP address for "localhost"
  (Novell/Suse Bugzilla bnc#489624 comment#19 and bnc#516511).
- Upgraded to CUPS 1.3.10:
  * Use a wrapper program filter/pdftops.c which only calls
  /usr/bin/pdftops (via configure --with-pdftops=/usr/bin/pdftops)
  instead of the CUPS fork of the Xpdf source code which was in
  the pdftops directory (CUPS STR #3129). Because of this
  cups-1.4svn-pdftops_as_filter.patch and
  cups-1.4svn-pdftops_dont_fail_on_cancel.patch are obsolete
  since CUPS 1.3.10 (the latter was fixed via CUPS STR #2808).
  * The scheduler now protects against DNS rebinding attacks
  (CUPS STR #3118 and Novell/Suse Bugzilla bnc#489624).
  * cups-1.3.9-cupstestppd.patch is obsolete since CUPS 1.3.10
  because it is fixed in the source (CUPS STR #2979).
  * cups-1.3.9-max_subscription.patch is obsolete
  since CUPS 1.3.10 because it is fixed in the source
  (no CUPS STR but mentioned in CHANGES.txt "The scheduler
  would crash if you exceeded the MaxSubscriptions limit").
  * cups-1.3.9-filter_png_overflow2.patch is obsolete
  since CUPS 1.3.10 because it is fixed in the source
  (CUPS STR #2974 and Novell/Suse Bugzilla bnc#448631).
  * cups-1.3.9-hpgltops2.patch is obsolete since CUPS 1.3.10
  because it is fixed in the source (CUPS STR #2966 which is the
  successor of CUPS STR #2911 and Novell/Suse Bugzilla bnc#430543).
  * cups-1.3.9-cupsImageReadTiff.patch is obsolete
  since CUPS 1.3.10 because it is fixed in the source
  (CUPS STR #3031 and Novell/Suse Bugzilla bnc#485895).
  * For a complete list see the CHANGES.txt file.
- cups-1.1.21rc2-preauth_security.patch and
  cups-1.1.21rc2-usermode.patch and
  cups-1.1.21-umlaut_printer.patch and
  cups-1.1.23-testpage.patch are finally removed
  since CUPS 1.3.10 because they were made for CUPS 1.1 and
  were no longer applied since CUPS 1.2 in Suse Linux 10.3.
  In particular cups-1.1.21rc2-usermode.patch can no longer
  apply since CUPS 1.2 because RunAsUser in cupsd.conf is
  no longer supported since CUPS 1.2, for more info see e.g. the
  "RunAsUser removed; reassurance wanted" mails on cups@easysw.com.
  Furthermore we neither got any Suse Linux/openSUSE user request
  nor any SLE11 beta-tester/customer request for them.
- Replaced "--enable-static" by "--disable-static" in configure
  so that the static libraries /usr/lib[64]/libcups.a and
  /usr/lib[64]/libcupsimage.a are no longer built and included
  in the cups-devel package to enforce detection of other software
  which might be built with static CUPS libraries so that those
  other software could be fixed to use the dynamic libraries
  (see also Novell/Suse Bugzilla bnc#509945).
- Set BROADCAST="ipp" in cups.SuSEfirewall2 source file (which
  gets installed as /etc/sysconfig/SuSEfirewall2.d/services/cups)
  so that adding "cups" to allowed services in the firewall
  also allows CUPS Browsing information via UDP broadcasts
  (Novell/Suse Bugzilla bnc#498429).
- cups-1.3.9-cupsImageReadTiff.patch fixes an integer overflow
  in the "_cupsImageReadTIFF()" function CVE-2009-0163
  (CUPS STR #3031 and Novell/Suse Bugzilla bnc#485895).
- added directory %{libdir}/cups/driver to %files of cups
  (bnc#465794)
- obsolete old cups-libs-XXbit and cups-devel-XXbit correctly
- use Obsoletes: -XXbit only for ppc64 to help solver during
  distupgrade (bnc#437293)
- fixed permission of snmp.conf (bnc#449570)
- fix for png size validation CVE-2008-??? (bnc#448631)
- correction for hpgl pen selection fix CVE-2008-3641 (bnc#430543)
- fixed rss subscription issue (bnc#446975)
- missed to fix a further PPD file: stcolor2.ppd
- Obsoletes: cups-SUSE-ppds-dat (bnc#438763)
- obsolete old -XXbit packages (bnc#437293)
- fixed issues in PPD files: failing through internal tests
- update to 1.3.9, which is mainly a bugfix version. For a complete
  list see included CHANGES.txt file, but important changes were
  already included via patches before.
  Deleted patches:
  cups-1.3.8-custom_ppd_fix.patch (CUPS STR #2889)
  cups-1.3.8-ssl_firefox.patch (CUPS STR #2892)
  cups-1.3.8-cupsfilter_path.patch (CUPS STR #2908)
  cups-1.3.8-pjl_ready_message.patch (CUPS STR #2909)
  cups-1.3.8-listener_compare.patch (CUPS STR #2910)
  cups-1.3.8-manyjob_finish.patch (CUPS STR #2913)
  cups-1.3.8-resolver_reinit.patch (CUPS STR #2920)
  cups-1.3.8-startstop_msg.patch (CUPS STR #2927)
  cups-1.3.8-noclobber_symlink.patch (CUPS STR #2937)
  cups-1.3.8-more_debuginfo.patch (CUPS STR #2943)
  cups-1.3.8-hostlookup.patch (CUPS STR #2946)
  cups-1.3.8-ipp_stop_after_pause.patch
  cups-1.3.8-lose_printers_on_allowed_users.patch
  Updated patches:
  cups-1.2.5-desktop_file.patch
- bugfixes:
  * printer stops after IPP pause
  * pritners got lost when users are set in Set Allowed Users Dialog
- added und integrated latest patches from upstream bugzilla:
  cups-1.3.8-custom_ppd_fix.patch (CUPS STR #2889)
  cups-1.3.8-ssl_firefox.patch (CUPS STR #2892)
  cups-1.3.8-cupsfilter_path.patch (CUPS STR #2908)
  cups-1.3.8-pjl_ready_message.patch (CUPS STR #2909)
  cups-1.3.8-listener_compare.patch (CUPS STR #2910)
  cups-1.3.8-manyjob_finish.patch (CUPS STR #2913)
  cups-1.3.8-resolver_reinit.patch (CUPS STR #2920)
  cups-1.3.8-startstop_msg.patch (CUPS STR #2927)
  cups-1.3.8-noclobber_symlink.patch (CUPS STR #2937)
  cups-1.3.8-more_debuginfo.patch (CUPS STR #2943)
  cups-1.3.8-hostlookup.patch (CUPS STR #2946)
- removed hplip in init script: hplip is no more (bnc#390663)
- beautified $BUILD_DISTRIBUTION_NAME setting
- Remove -p from fillups call.
- update to version 1.3.8:
  * bugfix version, which includes CVE-2008-1722
  * also includes some performance changes
  * refer to included CHANGES.txt file for full information
- removed obsolete patches
- removed deprecated use of %run_ldconfig
- added avahi-compat-mDNSResponder-devel to BuildRequieres
  (bnc#398700)
- fixed typo in Policy "easy"
- added two additional policies to cupsd.conf (fate#303515)
- fixed abuild failure: ownership of lppasswd
- fix directory/setgid permissions for lppasswd use (bnc#404142)
- crash on startup when BrowseAddress has no value (bnc#396969)
- added pdftops_any for 11.0 to Requires: (bugzilla#378434)
- renamed use of CUPS_PDFTOPS to HAVE_PDFTOPS in pdftops.c, to
  avoid execute of gs (bnc#390435)
- removed earlykdm from init script, due to new less CPU consuming
  start of daemon now (bnc#388007)
- merged both pdftops patches to one
- removed "recommended" remover (bnc#387267)
- new version of pdftops filter from svn extracted
- changed the perror() calls in pdftops.c for cups-1.3.x
  compatibility
- fixed the ghostscript call via new variable
  (unnecessary -> removed)
- grabbed and applied the wait() fix for childs from cups STR
- fix for integer overflow in png filter CVE-2008-1722
  (bugzilla#378335)
- not affected: CVE-2008-1693 (bugzilla#377872)
- added /usr/bin/pdftops to Requires:, and poppler-tools
  to Suggests:
- explicitly specify pdftops binary for configure to avoid
  adding buildrequires just for a binary path
- take out poppler for now to break the cycle, Klaus will
  fix correctly later
- changes for PDF.ppd
- added baselibs.conf file to build xxbit packages
  for multilib support
- pdftops uses now system command e.g. xpdf-tools
  (as in cups-1.4svn)
- due to requests: client.conf is back in /etc/cups
- fix for buildsystem: added wrapper script for krb5-config as the
  original output shows $CFLAGS $LIBDIR of cups.spec
  and rpath flags (bugzilla#378270)
- added missing directory /var/cache/cups to %files
- added pstopdf filter (from cups-mailto project at sourceforge.net)
- enabled krb5 support on request (bugzilla#377645)
- enabled further configure options: gcc's relro, gssapi
- and for run of cupsd: java, php, python (needs further activation)
- update to version 1.3.7:
  bugfix version only, includes CVE-2008-0047 and CVE-2008-1373.
  Refer to included CHANGES.txt file for full information
- worked on INFO in init file
- removed references to version SUSE 8.01 in specfile
- fixed issue in cgi-bin search CVE-2008-0047 (bugzilla#367225)
- update to version 1.3.6:
  * Documentation updates
  * Fixed a problem with the web interface "Use Kerberos
    Authentication" check box
  * The scheduler unconditionally overwrote the printer-state-
    message with "process-name failed" when a filter or backend
    failed, preventing a useful error message from being shown
    to the user.
  * Policies on CUPS-Move-Job didn't work as expected
  * The configure script only supported D-BUS on Linux
  * The scheduler did not support </LimitExcept>
  * The scheduler did not reset the job-hold-until attribute after
    a job's hold time was reached.
  * The scheduler did not support printer supply attributes
  * The Kerberos credentials provided by some Windows KDCs were
    still too large - now use a dynamic buffer to support
    credentials up to 64k in size
  * Printing a test page from the web interface incorrectly
    defaulted to the "guest" user
  * The cupsEncodeOptions2() function did not parse multiple-
    value attribute values properly
  * The scheduler incorrectly sent printer-stopped events for
    status updates from the print filters
  * The IPP backend could crash when handling printer errors
  * Multi-file jobs did not print to remote CUPS servers
  * The scheduler did not provide the Apple language ID to job
    filters.
  * Kerberos authentication did not work with the web interface
  * The requesing-user-name-allowed and -denied functionality
    did not work for Kerberos-authenticated usernames
  * CUPS didn't compile on HP-UX 11i
  * cupsEncodeOptions2() did not handle option values like "What's
    up, doc?" properly.
  * Added lots of memory allocation checks (Fortify)
  * The scheduler would crash if it was unable to add a job file
    (Fortify)
  * ppdOpen*() did not check all memory allocations (Coverity)
  * ippReadIO() did not check all memory allocations (Coverity)
  * The PostScript filter did not detect read errors (Coverity)
  * The scheduler did not check for a missing job-sheets-completed
    attribute when sending an event notification (Coverity)
  * "Set Printer Options" might not work with raw queues (Coverity)
  * cupsRasterInterpretPPD() could crash on certain PostScript
    errors (Coverity)
  * The USB backend did not check for back-channel support properly
    on all systems (Coverity)
  * Fixed memory leaks in the GIF and PNM image loading code
    (Coverity)
  * Removed some dead code in the CUPS API and scheduler (Coverity)
  * Fixed two overflow bugs in the HP-GL/2 filter (Coverity)
  * Fixed another ASN1 string parsing bug
  * The RSS notifier directory was not installed with the correct
    permissions.
  * The standard CUPS backends could use 100% CPU while waiting for
    print data
  * Filename-based MIME rules did not work
  * The cups-polld program did not exit if the scheduler crashed
  * The scheduler would crash if you tried to set the port-monitor
    on a raw queue
  * The scheduler could crash if a polled remote printer was
    converted to a class
  * The web interface and cupsctl did not correctly reflect the
    "allow printing from the Internet" state
  * The scheduler incorrectly treated MIME types as case- sensitive
  * The Java support classes did not send UTF-8 strings to the
    scheduler
  * The CGI code did not handle interrupted POST requests properly
  * The PostScript filter incorrectly handled number-up when the
    number of pages was evenly divisible by the number-up value.
  * The PDF filter incorrectly filtered pages when page-ranges and
    number-up were both specified
  * The IPP backend did not handle printing of pictwps files to a
    non-Mac CUPS server properly.
  * The scheduler did not detect network interface changes on
    operating systems other than Mac OS X
  * The scheduler now logs the UNIX error message when it is unable
    to create a request file such as a print job.
  * Added support for --enable-pie on Mac OS X.
- adapted access_conf.patch to 1.3.6
- changed permissions in %files according to cups (bugzilla#342772)
- update to version 1.3.5:
  * The SNMP backend did not check for negative string lengths
  * The scheduler incorrectly removed auth-info attributes,
    potentially leading to a loss of all options for a job.
  * The scheduler stopped sending CUPS browse packets on a restart
    when using fixed addresses
  * Fixed PDF filter security issues (CVE-2007-4352 CVE-2007-5392
    CVE-2007-5393)
  * Changing settings would always change the DefaultAuthType and
    Allow lines
  * The scheduler would crash when submitting an undefined format
    file from Samba with LogLevel debug2
  * The scheduler did not use poll() when epoll() was not supported
    by the running kernel
  * Fixed a compile problem with Heimdal Kerberos
  * The USB backend now retries connections to a printer
    indefinitely rather than stopping the queue.
  * Printers with untranslated JCL options were not exported to
    Samba correctly
  * The USB backend did not work with some Minolta USB printers
  * The strcasecmp() emulation code did not compile
  * The scheduler would crash if a job was sent to an empty class
  * The lpc command did not work in non-UTF-8 locales
  * Subscriptions for printer-stopped events also received other
    state changes
  * cupstestppd incorrectly reported translation errors for the
    "en" locale.
  * ppdOpen() did not handle custom options properly when the
    Custom attribute appeared before the OpenUI for that option.
  * The scheduler could crash when deleting a printer or listing
    old jobs.
  * The Mac OS X USB backend did not allow for requeuing of jobs
    submitted to a class.
  * lpmove didn't accept a job ID by itself.
  * The scheduler incorrectly removed job history information for
    remote print jobs.
  * The scheduler incorrectly sent the
    "com.apple.printerListChanged" message for printer state
    changes.
  * The PostScript filter drew the page borders (when enabled)
    outside the imageable area.
  * The LPD and IPP backends did not default to the correct port
    numbers when using alternate scheme names.
  * The scheduler incorrectly deleted hardwired remote printers on
    system sleep.
  * The scheduler would abort if a bad browse protocol name was
    listed in the cupsd.conf file.
  * The online cupsd.conf help file incorrectly showed "dns-sd"
    instead of "dnssd" for Bonjour sharing.
  * The scheduler could crash changing the port-monitor value.
  * The scheduler generated CoreFoundation errors when run as a
    background process.
  * When printing with number-up > 1, it was possible to get an
    extra blank page.
- removed CVE patches, which are already applied upstream
- Add dbus-1-devel to the BuildRequires.
- Add the --enable-dbus flag to the configure line to
  send DBUS signals out for queue change events.  This helps
  fix 345163.
- upgrade to version 1.3.4:
  * Documentation updates
  * CUPS now maps the "nb" locale to "no" on all platforms
  * CUPS did not work with a Windows 2003 R2 KDC
  * ippReadIO() could read past the end of a buffer
  * The scheduler would crash on shutdown if it was unable to
    create a Kerberos context.
  * Multiple AuthTypes in cupsd.conf did not work
  * The snmp.conf file referenced the wrong man page
  * The cupsaddsmb program didn't handle domain sockets properly
  * The scheduler now validates device URIs when adding printers.
  * Updated httpSeparateURI() to support hostnames with the
    backslash character.
  * Updated the Japanese localization
  * The parallel backend now gets the current IEEE-1284 device ID
    string on Linux
  * The IPP backend now checks the job status at variable
    intervals (from 1 to 10 seconds) instead of every 10 seconds
    for faster remote printing
  * "lpr -p" and "lpr -l" did not work
  * Compilation failed when a previous version of CUPS was
    installed and was included in the SSL include path
  * The scheduler did not reject requests with charsets other
    than US-ASCII or UTF-8, and the CUPS API incorrectly passed
    the locale charset to the scheduler instead of UTF-8
  * cups-deviced did not filter out duplicate devices.
  * The AppleTalk backend incorrectly added a scheme listing when
    AppleTalk was disabled or no printers were found.
  * The PostScript filter generated N^2 copies when the printer
    supported collated copies and user requested reverse-order
    output.
  * The scheduler did not reprint all of the files in a job that
    was held.
  * The scheduler did not update the printcap file after removing
    stale remote queues.
  * The cupsd.conf man page incorrectly referenced "AuthType
    Kerberos" instead of "AuthType Negotiate".
- fixes for xpdf CVE-2007-4352, CVE-2007-5393, CVE-2007-5392
  (bugzilla#335637)
- fix for IPP boundaries swamp-14294, CVE-2007-4351
  (bugzilla#335635)
- upgrade to version 1.3.3. Main features to 1.2.x:
  * Networking
  * Kerberos: CUPS now supports Kerberos authentication
  * Mac OS X Authorization Services: CUPS now supports the
    Authorization Services framework, providing role-based
    access control in addition to the tradition UNIX model
  * Peer Credentials: CUPS now supports authentication using
    peer credentials provided over UNiX domain sockets
  * SNMP Support: SNMP lookups are no longer performed by
    default, and IPP is no longer used for discovered printers
  * LPD Support; The LPD backend now supports a faster streaming
    mode that does not require a temporary file
  * Browsing
  * CUPS Browsing: The default configuration now shows shared
    printers from any address (not just @LOCAL)
  * DNS-SD (Bonjour/Zeroconf) Support: CUPS now supports printer
    sharing via DNS service discovery
  * LDAP w/SSL: CUPS now supports encrypted LDAP sessions
  * Web Interface
  * Internet Printer Sharing: You can now share printers over the
    Internet via the basic server settings
  * Improved On-Line Help: Searching the on-line help now shows
    results for all text, not just headings and links
  * Printer Setup: The available printer list is now only show
    when requested and the Add This Printer button now allows you
    to change the default name, location, and description
  * Printer Configuration: Raw printers and classes can now be
    configured using the Set Printer Options button
  * IPP Support
  * Job Printer Attributes: CUPS now provides
    job-printer-state-message and job-printer-state-reasons
    attributes containing copies of the corresponding printer
    attributes to provide important history information with each
    job
  * PPD Operations and Attributes: The new CUPS_GET_PPD operation
    allows you to retrieve PPD files from the scheduler; also,
    CUPS_GET_PPDS now reports more information and supports more
    value filters
  * Printer Defaults: The document-forma-default,
    notify-events-default, and notify-lease-duration-default
    attributes can be set for each printer and class
  * PWG Printer Alert Support: CUPS now supports the
    printer-alert and printer-alert-description attributes
  * Server-Side Options: Server-side default options can now be
    retrieved using the "printer-defaults" group keyword
  * Scheduler
  * Client Support: The scheduler now uses poll(), epoll(), or
    /dev/kqueue on platforms that provide them to support large
    numbers of clients
  * "Default" Authentication: You can now specify an AuthType of
    Default in locations and policies, which maps to the
    DefaultAuthType value
  * Larger Numbers of Clients: The scheduler now uses poll(),
    epoll(), or /dev/kqueue instead of select() when possible
  * New cupsctl Command: The new cupsctl command allows you to
    perform basic server configuration from the command-line
  * Printer Drivers
  * cupstestppd Improvements: The test utility now provides more
    extensive tests and options
  * Label Printer Driver: Added support for the Intellibar label
    printers
  * Localized Printer Drivers: The CUPS sample drivers are now
    localized in several languages
  * PJL Support: New cupsPJLCharset attribute controls character
    set for PJL strings
  * Pre-Filter Support: Drivers can now register format-specific
    filters to pre-screen print jobs
  * Side-Channel API; This new API provides out-of-band control
    of devices
  * CUPS API
  * Administration API: New cupsAdminGetServerSettings() and
    cupsAdminSetServerSettings() functions
  * Array API: New cupsArrayGetIndex(), cupsArrayGetInsert(),
    and cupsArrayNew2() functions
  * Destination API: New cupsRemoveDest() and
    cupsSetDefaultDest() functions
  * HTTP API: The http_t structure is now completely private
  * PPD API: New ppdLocalizeIPPReason()function and greatly
    improved ppdConflicts() performance
- added new files, adapted patches, and removed already
  included ones
- fix for missing newline before EOF in compressed files
  (bugzilla#309823)
- fix for exitcode on uiconstraints in cupstestppd
  (bugzilla#309822)
- patch: "None" needs to be valid value for cupstestppd
  (bugzilla#309219)
- fix for xpdf bugzilla#291690, CVE-2007-3387, swamp-11865
- upgrade to cups-1.2.12:
  * The PHP cups_print_file() function crashed if the options
    array contained non-string option values
  * The image/tiff file matching rule incorrectly identified some
    text files as TIFF files
  * The filter(7) man page incorrectly documented the "PAGE: total
    [#]-pages" message
  * PCL text files were mis-identified as HP-GL/2 and caused the
    HP-GL/2 filter to hang
  * When printing to a queue with user ACLs, the scheduler
    incorrectly returned a quota error instead of a "not allowed
    to print" error
  * cupsaddsmb could get in a loop if no printer drivers were
    installed
  * cupsRasterReadHeader() did not byte-swap the header properly
    when compiled with certain versions of GCC.
  * The IPP backend did not send the document-format attribute for
    filtered jobs
  * Some PPD files could cause a crash in ppdOpen2
  * The web admin interface incorrectly handled the "share
    printers" and "show remote printers" settings
  * The scheduler's log messages about AuthClass and AuthGroupName
    advised using a replacement directive but had the wrong syntax
  * Updated the PostScript/PJL and HP-GL/2 MIME rules to look in
    the first 4k of the file, not just the first 1k
  * Updated the Italian localization
- updated the mime and the psrewrite patch
- added quosnmp script to %doc
- removed rccupsrenice: cups-1.2.x does no longer traversing of
  filesystem during startup. reason no longer present.
- fixed as many rpmlint errors as possible
- Upgrade to cups-1.2.11:
  * "make distclean" didn't remove all generated files
  * Fixed a bug in the advertisement of classes
  * The IPP backend now stays running until the job is actually
    printed by the remote server; previously it would stop
    monitoring the job if it was held or temporarily stopped
  * PDF files were not always printed using the correct orientation
  * The scheduler could crash if you specified a bad file: URI for
    a printer
  * The Renew-Subscription operation now returns the
    notify-lease-duration value that was used
  * The IPP backend sent job options to IPP printers, however some
    printers tried to override the options embedded in the PS/PCL
    stream with those job options
  * ppdLocalize() now also tries a country-specific localization
    for when localizing to a generic locale name.
  * The cupstestppd program now allows for partial localizations to
    reduce the size of universal PPD files.
  * Chinese PPD files were incorrectly tagged with the "cn" locale
    (should have been "zh")
  * The backends now manage the printer-state-reasons attribute
    more accurately
  * Java, PHP, Perl, and Python scripts did not work properly
  * The scheduler would take forever to start if the maximum number
    of file descriptors was set to "unlimited"
  * The page-ranges option was incorrectly applied to the banner
    pages
  * Fixed some GCC compile warnings
  * The DBUS notification code was broken for older versions of
    DBUS
  * The IPv6 code did not compile on HP-UX 11.23
  * PPD constraints did not work properly with custom options.
  * Regular PPD options with the name "CustomFoo" did not work.
  * The USB backend did not work on NetBSD
  * The printer-state-reasons attribute was incorrectly cleared
    after a job completed
  * The scheduler did not set the printer operation policy on
    startup, only on soft reload
  * The AP_FIRSTPAGE_InputSlot option did not clear any ManualFeed
    setting that was made, which caused problems with some PPD
    files
  * cupsDoFileRequest() and cupsDoRequest() did not abort when
    getting an error in the response
  * The scheduler did not schedule jobs properly to remote or
    nested classes
  * Updated the mime.types and mime.convs headers to warn that the
    files are overwritten when CUPS is installed. Local changes
    should go in local.types or local.convs, respectively
  * The scheduler could get in an infinite loop if a printer in an
    implicit class disappeared
  * The pstops filter did not handle %%EndFeature comments properly
  * Fixed a problem with the Polish web page printer icons
  * ppdLocalize() now also localizes the cupsICCProfile attributes.
  * The scheduler still had a reference to the incorrect
    "notify-recipient" attribute
  * The "make check" and "make test" subscription tests did not set
    the locale
  * The "make check" and "make test" subscription tests incorrectly
    used the notify-recipient attribute instead of
    notify-recipient-uri
  * cupsRasterInterpretPPD() incorrectly limited the
    cupsBorderlessScalingFactor when specified in the job options.
- adapted cupstestppd patch
- added SuSEfirewall2 rules (bugzilla#247746)
- Upgrade to cups-1.2.10:
  * ppdLocalize() now supports localizing for Japanese using the
    "jp" locale name used by the ppdmerge program from the CUPS
    DDK 1.1.0
  * _cupsAdminSetServerSettings() did not support changing of
    top-level directives as designed.
  * The init script path check was broken.
  * CUPS incorrectly used the attribute "notify-recipient" instead
    of "notify-recicpient-uri" in several places
  * Fixed a configure script bug on MirBSD
  * The pdftops filter did not limit the amount of recursion of
    page sets
  * Custom page sizes with fractional point sizes did not work
  * The lpoptions command would crash when adding or removing
    options on a system with no printers
  * The scheduler did not use the default job-sheets (banners) for
    implicit classes
  * The scheduler could crash when listing complete jobs that had
    been unloaded from memory
  * The French localization was doubled up
  * Build system fixes for several platforms
  * The scheduler's openssl certificate generation code was broken
    on some platforms
  * The scheduler's log rotation check for devices was broken
  * The LPD mini-daemon did not handle the document-format option
    correctly
  * The pdftops filter ignored the "match" size option in the
    pdftops.conf file
  * cupstestppd now validates UTF-8 text strings in globalized PPD
    files
  * The outputorder=reverse option did not work with all printers
  * Classes containing other classes did not always work
  * Printer location and description information was lost if the
    corresponding string contained the "#" character
  * cupsRemoveOption() did not work properly
  * The USB backend did not work with some USB to parallel cables
    on Mac OS X.
  * The test page did not print the rulers properly on large media
    sizes
  * The text filter could crash when pretty printing certain types
    of files
- removed already included security patch xpdf_CVE_2007_0104
- Upgrade to cups-1.2.8:
  * Documentation fixes
  * The HTTP upgrade redirection used by the scheduler did not work
    with Internet Explorer
  * Members of a class with Unicode names did not appear correctly
    in the web interface
  * Changing the "Save debugging information" setting in the web
    interface no longer affects the other server settings
  * The scheduler did not choose SSL certificates correctly on Mac
    OS X
  * The scheduler could get in an infinite loop when printing to a
    remote class
  * The jobs web page did not have separating space after the
    number of pages column
  * Added French localization
  * Updated Spanish localization
  * Updated Japanese localization
  * cupsBorderlessScalingFacter was limited to a range of 0.9 to
    1.1, but some printers need larger values
  * Landscape printing of PDF files did not always work
  * Fixed slow USB printing on Minolta printers
  * The ZPL label printer driver could produce stretched output
  * The IPP backend now clears the printer-state-message when there
    are no outstanding errors or warnings
  * The CUPS Java scripting support did not work with recent
    versions of Java due to the use of Sun's private Base64 class
  * The scheduler did not pass HTTP GET form variables to custom
    CGI programs
  * The lpoptions command now displays the reason why a PPD file
    cannot be found
  * The scheduler did not accept "none" as a browse protocol name
  * The scheduler still loaded the remote printer cache, even when
    browsing was disabled
  * The SNMP backend now shows OfficeJet printers with the "HP"
    manufacturer prefix
  * Web interface HTML cleanup
  * The parallel backend consumed 100% CPU on FreeBSD due to an
    apparently common parallel port driver bug
  * ippReadIO() incorrectly returned IPP_IDLE when the initial IPP
    message header could not be read
  * cupsRasterInterpretPPD() did not support custom options
  * Collated output produced by the PostScript filter could lose
    some options
  * job-hold-until with time values for the next day would be held
    for 60 days
  * Some types of Sun raster files did not print correctly
  * Raw PBM files did not print correctly
  * The SNMP backend no longer uses IPP with HP printers, as some
    recent firmware versions appear to not work
  * cupsMarkOptions() did not handle the multiple-document-handling
    option
  * lpstat did not show the local job ID of active printers
  * The backends incorrectly used STATUS: media-tray-empty-error
    messages for out-of-paper conditions
  * cupsGetPPD2() returned the wrong error when the PPD file did
    not exist
  * cupsDoAuthentication() did not translate the password prompt
  * httpGetLength2() did not handle error messages without content
    correctly
  * Added support for 32/64-bit libraries on HP-UX Itanium systems
  * Fixed a configure script problem with the 32/64-bit library
    support
  * The PostScript filter did not properly output document setup
    commands for reversed output
  * The scheduler did not parse IPv6 netmasks properly
- removed backported, unnecessary patches
- fixed tcp_wrapper warnings (bugzilla#230730)
- fixed ps interpretation (bugzilla#242042)
- backported fixes from various issues, only in svn avail atm
- enabled LDAP on request (bugzilla#223007), no build cycle present
- fix for xpdf bugzilla#233113, CVE-2007-0104, swamp-7887
- added Required-Start: to rccupsrenice (bugzilla#231675)
- Fixed devel dependencies.
- removed broken locale patch: PS generation fails
  (bugzilla#227205)
- Upgrade to 1.2.7 (another bugfix version):
  * Documentation updates
  * The PostScript filter now rotates the bounding box values
    as needed
  * The scheduler no longer loads the remote printer cache when
    browsing is disabled
  * The scheduler no longer writes a new launchd configuration file
    if it doesn't have to
  * The scheduler now picks up on changes to IPv6
    and DNS configuration
  * The lpstat program could still hang
  * Fixed an inefficiency in the SNMP IPP detection code
  * The SSL negotiation code did not implement short timeouts
- fixed non conform PPD values in PSLEVEL*.PPD (bugzilla#219779)
- fixed perm problem of /etc/cups regarding lppasswd
  (bugzilla#218745)
- Upgrade to 1.2.6 (bugfix version):
  * "lpc status" did not show the number of queued jobs for
    disabled queues
  * The lpstat program could hang
  * The serial backend did not support the new USB serial filenames
    on Linux
  * The parallel backend did not support bidirectional I/O properly
  * The network backends now log the numeric address that is being
    used
  * Fixed a compile error when using libpaper
  * Fixed a compile error when compiling on Solaris with threading
    enabled
  * Missing printer-state-changed event for printer-state-message
    updates
- coolo's patch seems not to work, now using desktop-launch
  (bugzilla#207915)
- fixed cups.desktop file (bugzilla#207915)
- suse_update_desktop_file produces strange results in my xterm.
  redirecting output to /dev/null
- removed duplicate entry in %files: %{_libdir}/cups/monitor/*
- Upgrade to 1.2.5:
  * Documentation updates
  * The SNMP backend no longer uses IPP for Epson printers
  * Updated the configure script for Tru64 UNIX 5.1
  * Tru64 5.1B's getaddrinfo() and getnameinfo() functions leak file
  descriptors
  * cupsAddDest() didn't add the parent destination's options and
  attributes.
  * ppdConflicts() did not handle custom option constraints.
  * Raw printing of gzip'd files did not work
  * The scheduler no longer preserves default option choices when
  the new PPD no longer provides the old default choice
  * The Linux SCSI backend is now only built if the SCSI development
  headers are installed.
  * USB printing to Minolta printers did not work
  * Windows clients could not monitor the queue status
  * The scheduler didn't log the operation name in the access_log
  file for Create*Job and Print-Job requests.
  * The PostScript filter now separates collated copies with any
  required JCL commands so that JCL*based finishing options act on
  the individual copies and not all of the copies as a single
  document.
  * The PostScript filter now disables duplex printing when printing
  a 1*page document.
  * cups-lpd didn't pass the correct job-originating-host-name value
  * Fixed some speling errors in the German message catalog
  * cupstestppd did not catch PPD files with bad UIConstraints
  values
  * The USB backend did not work with the current udev- created
  printers if the first printer was disconnected
  * Mirrored and rotated printing did not work with some documents
  * 2-sided printing with banners did not work properly on some
  printers
  * Updated the raw type rule to handle PJL within the first 4k of a
  print job
  * Added an Estonian translation
  * Clarified the documentation for the cupsd.conf @LOCAL and
  @IF(name) allow/deny functionality
  * The PostScript filters did not escape the Title and For comments
  in the print job header
  * The scheduler would use 100% CPU if browsing was disabled and
  the cupsd.conf file contained BrowsePoll lines
  * The cupsDirRead() function did not work properly on
  non*POSIX-compliant systems
  * The cupsFile functions didn't handle read/write errors properly
- CUPS 1.2.4 fixes a number of web interface, scheduler,
  and CUPS API issues.
  Changes include:
- The --with-printcap configure option did not work
- The character set reported by cupsLangGet() did not always
  reflect the default character set of a given locale
- Older Lexmark and Tektronix printers did not work with IPP
- Failsafe printing did not work
- Some web interface redirects did not work
- The web interface change settings button could introduce
  a "Port 0" line in cupsd.conf if there was no loopback
  connection available
- The web interface change settings and edit configuration file
  buttons would truncate the cupsd.conf file
- The German web interface used the wrong printer icon images
- The "All Documents" link in the on-line help was missing a
  trailing slash
- The Polish web interface translation used the wrong URLs for
  the job history
- The "reprint job" button did not work
- The scheduler did not always report printer or job events
  properly
- The scheduler always stopped the queue on error, regardless
  of the exit code, if the error policy was set to "stop-printer"
- ppdEmitJCL() included UTF-8 characters in the JCL job name,
  which caused problems on some printers
- Fixed a buffering problem that cause high CPU usage
- The command-line applications did not convert command-line
  strings to UTF-8 as needed
- cupsDirRead() incorrectly aborted when reading a symbolic link
  that pointed to a file/directory that did not exist
- The cupsInterpretRasterPPD() function did not handle custom page
  sizes properly.
- Upgrade to 1.2.3:
  * The scheduler did not send job-state or job-config-changed events
  when a job was held, released, or changed
  * The scheduler now aborts if the configuration file and directory
  checks fail
  * Fixed a problem with ippPort() not using the port number that was
  set via the client.conf file or CUPS_SERVER environment variable
  * HTTP headers were not buffered
  * Some IPP printers (HP) did not like UTF-8 job names
  * The CUPS desktop icon is now localized for Polish
  * Printer options were not always honored when printing
  * The openssl command would lock up the scheduler when generating
  an encryption certificate on some platforms due to a lack of
  entropy for the random number generator
  * The web admin page did not recognize that "Listen 631" enabled
  remote access
  * The web admin page did not check whether changes were made to the
  Basic Server Settings check boxes
  * The IPP backend could generate N*N copies in certain edge cases.
  * The scheduler did not restore remote printers properly when
  BrowseShortNames was enabled
  * Polling did not handle changes to the network environment on Mac
  OS X
  * The "make test" subscription tests used invalid
  notify-recipient-uri values
  * Printers could be left in an undefined state on system sleep
  * The Berkeley and System V commands did not always use the
  expected character set
  * Remote printing fixes
  * The cupstestppd utility did not validate translation strings for
  custom options properly.
  * Multi-language PPD files were not properly localized in the web
  interface
  * The admin page's simple settings options did not check for local
  domain socket or IPv6 addresses and did not use "localhost" as
  the listen address.
  * An empty BrowseProtocols, BrowseLocalProtocols, or
  BrowseRemoteProtocols line would crash the scheduler instead of
  disabling the corresponding browsing options.
  * The scheduler now logs IPP operation status as debug messages
  instead of info or error.
  * cupsFileRewind() didn't clear the end-of-file state.
  * cupstestppd didn't report the actual misspelling of the
  1284DeviceID attribute
  * BrowseRelay didn't work on Debian
  * configure --without-languages didn't work
  * Manually added remote printers did not work
  * The  header was not installed.
  * Updated the build files for Autoconf 2.60
  * The scheduler incorrectly terminated the polling processes after
  receiving a partial log line.
  * The cups-lpd mini-daemon reported "No printer-state attribute
  found" errors when reporting the queue status
  * SNMP backend improvements
  * The scheduler erroneously reported an error with the CGI pipe
  * Fixed HP-UX compile problems
  * cupstestppd crashed with some PPD files
  * The  and  header files did not work with
  C++.
- upgrade to version 1.2.2, which fixes several build, platform,
  notification, and printing bugs. Changes include:
  * Documentation updates
  * CUPS didn't know about alternate character set names for
    Asian text
  * The lpoptions -o and -r options did not work unless you
    specified a printer.
  * The lpoptions command incorrectly allowed users to set
    printer attributes like printer-type
  * httpWait() did not flush the write buffer, causing
    "bad request" errors when communicating with CUPS 1.1.x
    servers
  * Polling did not sanitize the printer description, location,
    or make and model strings like broadcasts did.
  * Polled printers did not show the server's default job-sheets
    option value.
  * The Samba password prompt was not properly localized
  * Added a German translation
  * The scheduler now creates self-signed SSL certficates
    automatically when using OpenSSL and CDSA for encryption,
    just as for GNU TLS.
  * The SNMP backend sporatically reported some printers
    as "unknown"
  * The scheduler now forces BrowseTimeout to be at least twice
    the BrowseInterval value and non-zero to avoid common
    configuration errors.
  * The scheduler incorrectly returned printer URIs of the form
    "ipp://server/printers/classname" for classes
  * Updated Japanese localization
  * The scheduler's SSL certificate/key directory was not created
    on installation
  * Added a mailto.conf man page and help page
  * The parallel and USB backends no longer wait for the printer
    to go on-line - this caused problems with certain printers
    that don't follow with the IEEE-1284 standard
  * The scheduler could crash on a reload when implicit classes
    were present
  * The IPP backend incorrectly used the CUPS_ENCRYPTION
    environment variable to determine the default encryption
    mode when printing
  * USB printing did not work on Solaris
  * The scheduler sorted job priorities in the wrong order
  * The scheduler did not automatically restart notifiers
    that exited or crashed
  * IPv6 support did not work on NetBSD
  * The EPM packaging file did not work
  * The scheduler used up the CPU if BrowseRemoteProtocols
    was empty
  * Custom page sizes did not work
  * The SNMP backend could crash on some systems when SNMP
    logging was enabled
  * Browsing could produce some funny printer names when
    ServerName was set to an IP address
  * Fixed the log message for BrowseRelay
  * Fixes to allow CUPS to compile on MirBSD
  * The scheduler incorrectly set the FINAL_CONTENT_TYPE
    environment variable
  * The pdftops filter incorrectly embedded a "produced by"
    comment, causing PDF printing not to work on some
    operating systems
  * Sending raw jobs from a client system could cause the
    client's scheduler to eventually crash
  * The scheduler now checks that the notifier exists prior
    to accepting a new subscription request.
  * The scheduler now reports the supported notify-recipient
    schemes based on the contents of the ServerBin/notifier
    directory.
  * Event notifications did not include the
    notify-sequence-number or other required attributes
  * Allow/Deny addresses of the form "11.22.33.*" did not work
    on Linux
  * cupsGetPPD() did not work if the scheduler was only
    listening on a domain socket
  * The scheduler could crash advertising a class
  * The scheduler could crash if the default printer was deleted
  * Added a new default CUPS raster format (v3) which does not
    compress the raster stream in order to provide the same
    cupsRasterReadPixels() and cupsRasterWritePixels()
    performance as CUPS 1.1.x.
  * The cupsaddsmb man page listed the wrong files for
    the CUPS driver.
  * Some configure --with options did not work
  * "Allow @IF(name)" didn't work if "name" wasn't the first
    network interface
  * The lpstat command did not use the correct character set
    when reporting the date and time
  * The cupsaddsmb command and web interface did not update
    the Windows PPD files properly, resulting in corrupt PPD
    files for the Windows client to use
  * The cupsd.conf man page didn't describe the Listen domain
    socket syntax
  * The scheduler no longer tries to support more than
    FD_SETSIZE file descriptors.
  * CDSA (encryption) support fixes for MacOS X.
  * The lppasswd program needs to be setuid to root to create
    and update the /etc/cups/passwd.md5 file
  * 32/64-bit library installation was broken
  * The USB backend now reports a "no such device" error
    when using the old filename-based USB URIs instead of
    the "success" error.
  * Increased the HTTP and IPP read timeouts to 10 seconds,
    as 1 second was too short on congested networks
  * The SNMP backend now uses the device description over the
    printer-make-and-model attribute when the attribute
    contains a generic name
  * Fixed another file descriptor leak when printing raw files
  * Raw queues were not shared via LDAP
  * The pstops filter didn't always embed PageSetup commands
    from the PPD file
  * "make install" didn't work if you disabled all of the
    localizations.
  * The scheduler didn't always choose the least costly filter.
  * Fixed parsing of IPv6 addresses in Allow, Deny, BrowseAllow,
    BrowseDeny, and BrowseRelay directives
  * Printers that were shared via LDAP did not get added to
    the LDAP server properly
  * LDAP browsing would crash the scheduler if a required value
    was missing
  * Special cases for the "localhost" hostname did not work,
    causing printing to not work when the /etc/hosts file
    did not contain a localhost entry
  * Updated the Spanish translation
  * Reverse-order page output was broken when N-up or landscape
    orientations were used
  * The parallel, serial, socket, and USB backends needed print
    data before they would report back-channel data, causing
    problems with several new drivers
- fixed randomly crash when testing many PPD files
  (bugzilla#193354)
- moved 3.0 from BETA to STABLE
- do not use deprecated libpng function png_read_destroy
- reinjected lost --datadir into configure
- upgrade to version 1.2.1: a major release after long (>1y)
  development with new functions, many enhancements, bugfixes
  and new bugs
- removed Required-Start: in rccupsrenice; real fix for
  (bugzilla#172708)
- Only activate cupsrenice on initial install; [#172708].
- fixed pswrite.patch (bugzilla#169068)
- fixed the usb naming for special HP printers (bugzilla#163833)
- converted neededforbuild to BuildRequires
- Move cups-config to the libs sub package.  Then we do not bother
  anyone as cups-libs is required by cups-devel and cups; [#142004].
- Use -fstack-protector.
- moved cups-config into main package (bugzilla#142004)
- fixed %files for /etc/cups/printcap (bugzilla#140308)
- fixed various xpdf security issues (bugzilla#137156)
  CVE-2005-3624, CVE-2005-3625, CVE-2005-3626, CVE-2005-3627,
  CVE-2005-3628, CVE-2005-3193
- fixed xpdf overflow CVE-2005-3193 (bugzilla#137156)
- fixed the info of last printer in printcap file (bugzilla#132152)
- added global lpoptions file (bugzilla#118982)
- fixed $ppid test in rccupsrenice (bugzilla#119822)
- fixed short description in rccupsrenice (bugzilla#121873)
- changed filtering of mozilla-ps (bugzilla#130623)
- fixed segfault in cupstestppd (bugzilla#116468)
- fixed rccupsrenice: can handle mutliple pids in $ppid now
  (bugzilla#115863)
- fixed rccupsrenice: link points to correct script
- fixed rccupsrenice: requires changed to cupsd (bugzilla#115261)
- fixed length of stftime array in lpstat (bugzilla#105732)
- rccupsrenice checks if cupsd is running before processing
  (bugzilla#114650)
- coolo wants a speedup of system boot:
  rccups: cupsd gets now a lower ionice value if booting in level 5
  and rccupsrenice (new introduced) brings those io values back,
  later when system is up and running
- removed backends pipe and novell; now in cups-backends
- further changes for PIE
- renamed latest patches to my naming schema
- build with -fPI[CE] (not -fpi[ce]) to avoid GOT overflows in
  certain packages (e.g. scribus) on s390*
- build as PIE
- Bugzilla #41006 "Charset detection in CUPS":
  add missing includes and fix charset and language detection.
- removed permissions file from package (bugzilla#66305)
- changed permission of xinetd.d file
- fixed SUSE version in testpage (bugzilla#78075)
- gcc4.0 compilation fixes (thx to mls)
- fixed problem in lppasswd file generation (bugzilla#64370)
- fixed problem in library with authorization
- cupstestppd checks now PageSize more properly
- fixed lpstat segfault issue (bugzilla#66328)
- added "hplip" to rccups (bugzilla#65378)
- introduced norootforbuild
- update to version 1.1.23 and adaption of patches
- added xpdf buffer overflow fix; CAN-2005-0064 (bugzilla#49840)
- Use <owner>:<group> in permissions file.
- added additional xpdf buffer overflow patches (missing in this
  version)
- updated novell backend (bugzilla#41773)
- updated pipe backend (bugzilla#33659)
- updated to cups-1.1.22
- adapted spec file, patches, etc.
- Include common-* PAM config files in cups configuration
- added creation of group ntadmin in %pre (bugzilla#45719)
- cupstestppd fails on some doubtful Sharp PPDs (bugzilla#45648)
- removed ed from neededforbuild list
- fix for umlaut names when download of queue ppds (bugzilla#44975)
- cups-1.1.21 is now released
- cupsomatic removed (will be replaced by
  foomatic-rip/foomatic-filters)
- more useable messages in preauth patch
- ignores now short living childs in ppds.dat generation case
- fixed security problem in cupsomatic, CAN-2004-0801
  (bugzilla#44233)
- first try for cups-1.1.21rc2
- renumbered patches
- adapted old SuSE patches to this version
- removed /var/adm/notify -- ancient and no longer needed
- added test for /.buildenv to make users happy (bugzilla#43503)
- removed needless "rm -rf $RPM_BUILD_ROOT" in %install
- added -fno-strict-aliasing compile option (*sic*)
- added missing mime handling of pswrite (bugzilla#33862)
- removed x-devel-packages from neededforbuild
- fixed segfault in library (bugzilla#38381) - tested and
  works fine
- fixed image links in web interface (bugzilla#36403)
- fixed cupstestppd (bugzilla#36688)
- cupstestppd failed if PPD file has default for non-existance
  names (STR#476)
- patch for CPU excess if CGI is sending faster than client
  receiving (STR#595)
- faster scan of ppd files (bugzilla#33222)
- patch for broken HTTP authentication cache (STR#517)
- redirect administration tasks to primary server (STR#491)
- added pswrite filter script to produce PostScript1 output
- beautified filter ogonki
  "mktemp -q /tmp/dvitops.XXXXXX" -> ogonki.XXXXXX
- removed cups-1.1.19-no_dvi.patch, fixed cups-mime.patch instead
- added PS1 and PS2 PPD files (bugzilla#34938)
- backport of signed char usage for weird platforms (STR#518)
- cups-lpd mini-daemon rejects jobs if queue behing is
  rejecting (STR#515)
- fix for too fast CGI data delivery (STR#484)
- backport of fixes in CVS repository for scheduler and library,
  with many fixes, like crash on remote reject, close client on
  errors, propper http flushing, etc. -- first print tests
  work fine.
- many backports of fixes in CVS repository
- upgrade of pdftops to version 2.03
- memory overwrite fixed in rastertoepson
- fixed md5sum revealing problem (bugzilla#32862)
- fixed naming of some usb printers
- activated incidentally removed usermode patch (bugzilla#34438)
- added "printbill" to rccups
- Add pam-devel to neededforbuild
- fixed permission of directory interfaces (bugzilla#33337)
- added new option "-p" to generate ppds.dat only and exit
  (bugzilla#33222)
- added openslp support
- upgraded to 1.1.20 (final)
- changed LC_MESSAGES -> LC_CTYPE (= fixed bugzilla#26006)
- update to 1.1.20rc2
- authentication method for /admin changed (bugzilla#31158)
- fixed PPDs defaults: Letter -> A4 (bugzilla#30662)
- Set sticky bit for /var/spool/cups/tmp
- changed rcfile, as suggested in bugzilla#28444
- fixed typo in configuration for preauth security patch
- fix for the SLP browsing patch (missing/wrong initialize
  of variables)
- fix for boolean options in filters (CUPS STR#249)
- fix for check of written bytes in 4 backends (CUPS STR#253)
- fix for segfault when browsing and SLP is set on (CUPS STR#259)
- fix for restart problem of processed jobs (CUPS STR#226)
- fix for LPD port number in URI (CUPS STR#249)
- fix for Landscape PDF offset rotation position (CUPS STR#243)
- generated /etc/cups/printcap and link /etc/printcap due
  to UserMode (bugzilla#29671)
- fixed %_libdir problem in xinetd.d/cups-lpd (bugzilla#29877)
- last fix of bugzilla#29418 didn't work in reality. on specfile
  again.
- "-y" for fillup_and_insserv
- DOCDIR removed to fix bugzilla#29418
- specfile: daemon has now security patches -> start it on boot
  per default
- specfile: restart of daemon on package update
- Set explicit correct permissions of /etc/cups contents, else
  cups will do it.
- changed attributes for files (bugzilla#28736)
- fix for locale destroying (bugzilla#29218)
- made restrictrions in cupsd.conf to take preauthorization effect
- cupsd runs now as lp:lp (as suggested in bugzilla#28444)
- added preauthorization patch from okir - seems to work - thx
- fixed USB backend to report manufacturer and model, if
  description string is missing (cups STR#174)
- fixed problem with some embedded Type1C fonts (cups STR#177)
- fixed problem when reading files and using the POSIX locale
  (cups STR#159)
- added official patch for cupstestppd problem (bugzilla#27950)
- fixed problem with "keepalive on" (bugzilla#28154)
- fixed encode options to honor "yes" and "on" as values too
- fixed metadata in sysconfig file (bugzilla#28861)
- fixed cupstestppd (bugzilla#27950)
- don't strip explicitly, but let the brp scripts handle it
- fixed ogonkify (bugzilla#28307)
- fixed 64bit problem in printers.cgi (bugzilla#24786)
- removed dvi printing support due to missing packages
  (bugzilla#27032)
- splitted out foomatic-filters package, which is cups independed
  (except Coolo's faulty checking)
- fixed mandir problem under non-i386 architecture
- remove smb backand from file list and init script; it's now part
  of the samba-client package
- added ptal to Should-Start in rccups (bugzilla#27159)
- Add missing directories to filelist
- 1.1.19 is released -> updated
- remove unpackaged files from buildroot
- updated to 1.1.19rc3
- removed unnecessary patches
- removed README.SuSE (bugzilla#26479)
- added patch for cgi-interface: hostname is now mapped
  to localhost
- updated PrintAnalyzer script
- fixed "endless attempts to print" problem (bugzilla#25152)
- installs now correct pam file (bugzilla#23277)
- fixed location of foomatic-rip filters -> /usr/bin
- added link for foomatic-rip
- updated foomatic-rip (to latest, fixed version)
- fixed typo for manpage installation of foomatic-rip
- fixed file list of cups and cups-client (foomatic-rip is part
  of cups and therefore the corresponding package should contain
  the manpage too)
- updated cupsomatic to linuxprinting.org (hopefully fixed
  accounting problem)
- fix for add printer with KDE util (from CVS head)
- fixed again filelist :)
- fixed documenation path (buzgzilla#24083)
- fixed PPD file parsing (from CVS head)
- tested daemon
- fix filelist (file listed twice)
- updated foomatic-gswrapper
- added new foomatic-rip: filter, config file and manpage
- updated backends novell and pipe
- renamed sysconfig metadata:  sysconfig.cups -> cups.sysconfig
- renamed permissions file:    permissions.cups -> cups.permissions
- fixed problem in lpoptions (no more loops! :)
- Add sysconfig metadata [#22629]
- Use pam_unix2.so instead of pam_unix.so
- fixed "Error message when starting cups daemon" problem
  (bugzilla#22472)
- removed unnecessary DocumentRoot setting cupsd.conf
- changed replacement of distribution in testprint.ps
- rccups: moved hotplug from required start to should-start
  (bugzilla#23054)
- added /usr/bin/cupstestppd (bugzilla#23143)
- created xinetd.d file for cups-lpd
- added usb patch (for epson printers)
- added herrno patch in IPP protocol
- added two backends (pipe + novell), written by jsrain@suse.cz
- welcome back foomatic filter (makes more sense to have it here)
- updated to 1.1.18, adapted testpage.diff for new version
- fixed test for link problem in rccups
- removed foomatic filter. with next suse release will be
  in pkg cups-drivers
- updated to version 1.1.17, removed lib64 patch (now already
  in source tree)
- updated %files for all cups subpackages.
  (Now new cups files are included too :-)
- removed debuging option in spec file.
- updated to version 1.1.16, removed or adapted SuSE patches
- added prereq for groupadd (#19300)
- fix postinstall
- changed %post: removed "insserv" to make yast2 and security happy
- changed cupsd.conf for 127.0.0.2 access (bugzilla#18764)
- added directory /usr/share/cups/drivers for cupsaddsmb/samba
- fixed foomatic and foomatic-gswrapper (bugzilla#18425)
- gave %files sections a %deffattr and gave special files and dirs
  a required %attr permissions of lp.sys (bugzilla#18126)
- fixed hardcoded path CUPS_SERVERBIN (fixes ghostscript on lib64
  archs)
- Correct PreReq
- cups-devel now requires exact matching version of cups-libs
- added /var/log/cups to cups-libs (bugzilla#17617)
- add %run_ldconfig
- fix for author patch: crashed on reload signal
  (tested for stability)
- using now fillup to generate sysconfig file
- replaced delayed exit patch by CUPS authors one
- again rccups: rc.config only parsed, if present
  (for backward compatibility)
- updated rccups to satisfy new SuSE requirements
- added delayed exit of cupsd patch (for processing many PPD files)
- adapted the pam file for SuSE (according to Thorstens proposal)
- upgraded to version 1.1.15 and adapted all the old patches
- moved %{_sysconfdir}/cups to libs (as suggested by jsmeix)
- added symbolic link /usr/bin/lpc (bugzilla #16652)
- changed umask in rccups (bugzilla #16567)
- Running cupsd if no printer is configured makes no sense.
  Do not activate cupsd after installation in %post.
- fixed g++/cups-config problems in other cups subpackages
- added 'cups-config' to devel
- fixed linker problem (rpath) under x86_64
- therefore old x86_64 fix is no longer necessary: removed.
- added %ifarch x86_64 to avoid linking problems in specfile.
- updated to 1.1.14
- removed unnecessary patches
- adapted testpage.ps patch to new file
- fixed permission problem with lppasswd
- fixed %files section (now includes all %dirs too)
- don't call autoreconf, we can't use autoheader and automake here
- fixed too restrictive IPP security fix
- fixed documentation path (#13889)
- reorganized online documentation. old structure might confuse
  people (#13849)
- completed the IPP security fix again (hopefully the last time)
- completed the IPP security fix
- updated perl scripts cupsomatic, and foomatic-gswrapper
- made patch cups-cs-utf8.dif again. got build problems with
  last version.
- Added iso-8859-2 patch for czech utf-8 locale.
  Thanks to Petr Blahos .
- added IPP security fix
- log tcp-wrappers based connection refusals to cups' own logfiles
  instead of syslog.
- changed neededforbuild <libpng> to <libpng-devel-packages>
- added support for tcp-wrappers (cups-1.1.12-libwrap-addition.dif)
  token for /etc/hosts.{allow,deny} is "cupsd".
- Fix gcc version check.
- cups-client does not provide print_daemon anymore. print_daemon
  is required by aps but cups-client does not satisfy aps
  regarding this.
- START_CUPS variable removed
- up to 1.1.12
- fixes specfile
- add standard postscript PPD
- set DefaultPage{Size,Region} to A4 in ppd files
- now reqiures ghostscript_any
- add /etc/permissions.d/cups-client (#4094)
- personalize test page
- move old font directory if existing and send mail
- up to 1.1.11
- remove ghostscript-fonts-std from neededforbuild, this is only
  a runtime requirement
- work around cups' broken tmp file handling (#10142)
- move client.conf to libs package
- activate cat8 man pages
- add README.SuSE
- update lphelp
- split into cups-client and cups(-server) package
- add %ghosty smb printer backend support
- re-add ogonky for non-latin1 charsets (#9864)
- add printanalyzer script in doc
- removed cups.conf (now provided by susehelp)
- Remove -j parameter from spec file
- update to 1.1.10-1 (many fixes)
- fix output for dvi's (bug #9862)
- new poll_ppd_base
- split out cups-libs from cups
- add ssl directory
- make correct links for cups libraries
- use ghostscript fonts which are the same as the cups fonts
  and adjust dependecy for ghostscript-fonts-std
- enable SSL
- correct init script
- new version 1.1.9 .
- updated init script to new skeleton (Bug #8981).
- added support for PS files created by Netscape.
- Fix missing declarations.
- moved foomatic-gswrapper and cupsomatic
  from cups-drivers to cups
- patched cupsd to use /dev/urandom instead of /dev/random.
  This fixes bug #6703
- spec file overhaul
- using RPM_BUILD_ROOT now
- removed /etc/printcap from file list
- removed dependency to cups-drivers
- Wake up Epson Stylus USB printers before sending the print job.
- Added czech translations (czech.dif).
- added cups.conf for susehelp
- USB printers can be now addressed using URI
  usb:?vendor=<xxxx>&prod_id=<yyyy>
  where <xxxx> and <yyyy> are USB identification numbers. (e.g.
  usb:/dev/usb/lp?vendor=04a9&prod_id=1052 for Canon BJC-6100)
- fixed pplication/dvi -> application/dvi in conf/mime.convs
- update to 1.1.6-3 (fixing several security issues)
- update to 1.1.6 (fixes possible DoS attack)
- added missing reqiures for cups-drivers
- update to version 1.1.5
- cups configuration changed - Browsing now Off by default
- added DVI filter
- fixed spec
- fixed startscript
- added rc.config fillup and SuSEconfig script to automatically
  set browse address if demanded
- split into system and development package
- documentation root changed
- update to version 1.1.4
- small changes in spec file
- make post-script succeed unconditionally
- update to version 1.1.3
- restart daemon if already started
- added two little tools (poll_ppd_base, lphelp)
- added a few compatibility links
- turned automatic generation of printcap on
- turned implicit classes off since they are buggy
- fixed directory structure
- added links to lpd and rclpd
- added Conflicts line
- initial package

New Kubic snapshot 20211127 released!

Richard Brown