Am Donnerstag, 25. März 2010 17:15:41 schrieb Johannes Obermayr:
Am Donnerstag, 25. März 2010 16:43:56 schrieb Larry Finger:
On 03/25/2010 10:16 AM, Johannes Obermayr wrote:
Hi,
I installed Kernel 2.6.34-rc2 on three systems (all 11.2 with Kernel:HEAD repo). Two of them do not have any problems - they seem even a bit faster compared to 2.6.33.
But on one system (MSI K7T Turbo [MS-6330] with a AMD Duron 900) the kernel hangs at an early stage (all flavors). It is so early that I cannot provide any logs and only the reset button works then.
Can you please tell me what I have to do for providing useful information?
Btw. I am not really familiar with kexec and kdump ...
Does the boot splash screen come up? If so, hit ESC to clear it, then report the last line output. If that line is "Loading basic drivers", you might try adding "ipv6.disable=1" to the GRUB option line before booting.
I use every time "splash=0"
The other options are to set up netconsole or a serial console to capture the boot log.
Larry
What I can read on screen without times (I hope there are not any typos ...):
CR: 0000000000000000 ---[ end trace 17c212293c363a9e ]--- Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: swapper Tainted: G D W 2.6.34-rc2-2-desktop # 1 Call Trace: [<c02061ab>] try_stack_unwind+0x14b/0x170 [<c020503f>] dump_trace+0x3f/0xf0 [<c0205dbb>] show_trace_log_lvl+0x4b/0x60 [<c0205de8>] show_trace+0x18/0x20 [<c064c810>] dump_stack+0x6d/0x72 [<c064c861>] panic+0x4c/0xe8 [<c0244288>] find_new_reaper+0x78/0x80 [<c0245390>] forget_original_parent+0x30/0x270 [<c02455db>] exit_notify+0xb/0x170 [<c0245aee>] do_exit+0x17e/0x380 [<c0650856>] oops_end+0x86/0xc0 [<c022624f>] bad_area_nosemaphore+0xf/0x20 [<c064fc7a>] error_code+0x66/0x6c [<c0991c0f>] memmap_init+0x19/0x2c [<c020112f>] do_one-initcall+0x2f/0x190 [<c0964460>] do_basic_setup+0x3f/0x4d [<c09644dd>] kernel_init+0x6f/0xfa [<c02033ff>] kernel_thread_helper+0x6/0x10
Could this be the failure? I installed 2.6.31.12, 2.6.34-rc2 and then 2.6.31.12 again. When you look right you can see some missing kernel modules only in 2.6.34-rc2 at execution of mkinitrd. (Btw. do not say: "Hey, you are using another flavor now (default instead of desktop)" - As I said this problem is with all flavors. It is only for demonstration ...) # 2010-03-25 19:18:59 kernel-default-2.6.31.12-0.2.1.i586.rpm installed ok # Additional rpm output: # Free diskspace below /boot: 53511024 blocks # # Kernel image: /boot/vmlinuz-2.6.31.12-0.2-default # Initrd image: /boot/initrd-2.6.31.12-0.2-default # Root device: /dev/disk/by-id/ata-IC35L080AVVA07-0_VNC402A4GXUTPG-part2 (/dev/sda2) (mounted on / as ext3) # Resume device: /dev/disk/by-id/ata-IC35L080AVVA07-0_VNC402A4GXUTPG-part1 (/dev/sda1) # Kernel Modules: libata pata_pdc202xx_old pata_via ata_generic ide-core via82cxxx pdc202xx_old ide-pci-generic hwmon thermal_sys fan ata_piix edd rtc-lib rtc-core rtc-cmos pata_sc1200 pata_cmd64x pdc_adma pata_cs5536 pata_serverworks pata_hpt3x3 pata_optidma sata_via pata_ns87410 pata_marvell pata_ninja32 pata_cypress pata_winbond pata_atiixp pata_artop pata_opti ahci pata_sis sata_sis pata_hpt37x pata_rz1000 pata_cs5520 pata_netcell pata_acpi pata_qdi pata_sl82c105 pata_oldpiix sata_inic162x sata_qstor pata_ali pata_mpiix sata_sil24 pata_hpt366 sata_nv sata_vsc pata_amd pata_cs5530 pata_sil680 pata_triflex pata_pdc2027x pata_jmicron pata_it821x pata_legacy sata_uli pata_hpt3x2n sata_svw pata_sch sata_sx4 pata_cmd640 sata_mv pata_it8213 pata_efar pata_isapnp pata_ns87415 pcmcia_core pcmcia pata_pcmcia sata_promise pata_cs5535 sata_sil pata_radisys ohci-hcd ehci-hcd uhci-hcd hid usbhid # Features: block usb resume.userspace resume.kernel # 31819 blocks # 2010-03-25 19:18:59|install|kernel-default|2.6.31.12-0.2.1|i586|root@Vadda|openSUSE_11.2up|15b687e20b04f82c06d559fdd015688b73c573ab # 2010-03-25 19:27:30 kernel-default-2.6.34-rc2.2.1.i586.rpm installed ok # Additional rpm output: # Free diskspace below /boot: 53488520 blocks # # Kernel image: /boot/vmlinuz-2.6.34-rc2-2-default # Initrd image: /boot/initrd-2.6.34-rc2-2-default # Root device: /dev/disk/by-id/ata-IC35L080AVVA07-0_VNC402A4GXUTPG-part2 (/dev/sda2) (mounted on / as ext3) # Resume device: /dev/disk/by-id/ata-IC35L080AVVA07-0_VNC402A4GXUTPG-part1 (/dev/sda1) # modprobe: Module via82cxxx not found. # WARNING: no dependencies for kernel module 'via82cxxx' found. # modprobe: Module pdc202xx_old not found. # WARNING: no dependencies for kernel module 'pdc202xx_old' found. # modprobe: Module ide_pci_generic not found. # WARNING: no dependencies for kernel module 'ide_pci_generic' found. # Kernel Modules: scsi_mod libata pata_pdc202xx_old pata_via ata_generic hwmon thermal_sys fan ata_piix edd rtc-lib rtc-core rtc-cmos pata_sc1200 pata_cmd64x pdc_adma pata_cs5536 pata_serverworks pata_hpt3x3 pata_optidma pata_atp867x sata_via pata_ns87410 pata_marvell pata_rdc pata_ninja32 pata_cypress pata_winbond pata_atiixp pata_artop pata_opti ahci pata_sis sata_sis pata_hpt37x pata_rz1000 pata_cs5520 pata_netcell pata_acpi pata_qdi pata_sl82c105 pata_oldpiix sata_inic162x sata_qstor pata_piccolo pata_ali pata_mpiix sata_sil24 pata_hpt366 sata_nv sata_vsc pata_amd pata_cs5530 pata_sil680 pata_triflex pata_pdc2027x pata_jmicron pata_it821x sata_uli pata_hpt3x2n sata_svw pata_sch sata_sx4 pata_cmd640 sata_mv pata_it8213 pata_efar pata_isapnp pata_ns87415 pcmcia_core pcmcia pata_pcmcia sata_promise pata_cs5535 sata_sil pata_radisys sd_mod usbcore ohci-hcd ehci-hcd uhci-hcd hid usbhid # Features: block usb resume.userspace resume.kernel # 32505 blocks # 2010-03-25 19:27:30|install|kernel-default|2.6.34-rc2.2.1|i586|root@Vadda|Kernel:HEAD_11.2|c86e130c2bcde0dc2a4e87e462d0eb6769fa78c9 # 2010-03-25 19:33:57 kernel-default-2.6.31.12-0.2.1.i586.rpm installed ok # Additional rpm output: # Free diskspace below /boot: 53466272 blocks # # Kernel image: /boot/vmlinuz-2.6.31.12-0.2-default # Initrd image: /boot/initrd-2.6.31.12-0.2-default # Root device: /dev/disk/by-id/ata-IC35L080AVVA07-0_VNC402A4GXUTPG-part2 (/dev/sda2) (mounted on / as ext3) # Resume device: /dev/disk/by-id/ata-IC35L080AVVA07-0_VNC402A4GXUTPG-part1 (/dev/sda1) # Kernel Modules: libata pata_pdc202xx_old pata_via ata_generic ide-core via82cxxx pdc202xx_old ide-pci-generic hwmon thermal_sys fan ata_piix edd rtc-lib rtc-core rtc-cmos pata_sc1200 pata_cmd64x pdc_adma pata_cs5536 pata_serverworks pata_hpt3x3 pata_optidma sata_via pata_ns87410 pata_marvell pata_ninja32 pata_cypress pata_winbond pata_atiixp pata_artop pata_opti ahci pata_sis sata_sis pata_hpt37x pata_rz1000 pata_cs5520 pata_netcell pata_acpi pata_qdi pata_sl82c105 pata_oldpiix sata_inic162x sata_qstor pata_ali pata_mpiix sata_sil24 pata_hpt366 sata_nv sata_vsc pata_amd pata_cs5530 pata_sil680 pata_triflex pata_pdc2027x pata_jmicron pata_it821x pata_legacy sata_uli pata_hpt3x2n sata_svw pata_sch sata_sx4 pata_cmd640 sata_mv pata_it8213 pata_efar pata_isapnp pata_ns87415 pcmcia_core pcmcia pata_pcmcia sata_promise pata_cs5535 sata_sil pata_radisys ohci-hcd ehci-hcd uhci-hcd hid usbhid # Features: block usb resume.userspace resume.kernel # 31819 blocks # 2010-03-25 19:33:57|install|kernel-default|2.6.31.12-0.2.1|i586|root@Vadda|openSUSE_11.2up|15b687e20b04f82c06d559fdd015688b73c573ab -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-kernel+help@opensuse.org