From: Boris Brezillon
Use pwm_get/set_xxx() helpers instead of directly accessing the pwm->xxx
field. Doing that will ease adaptation of the PWM framework to support
atomic update.
Signed-off-by: Boris Brezillon
Signed-off-by: Thierry Reding
Git-commit: 4b58896f72176b781816a9e14dcea5f755b19b5c
Patch-mainline: v4.7-rc1
Signed-off-by: Matwey V. Kornilov
---
drivers/pwm/pwm-crc.c | 2 +-
drivers/pwm/pwm-lpc18xx-sct.c | 2 +-
drivers/pwm/pwm-sun4i.c | 3 ++-
3 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/pwm/pwm-crc.c b/drivers/pwm/pwm-crc.c
index 7101c7020bf4..bd0ebd04856a 100644
--- a/drivers/pwm/pwm-crc.c
+++ b/drivers/pwm/pwm-crc.c
@@ -75,7 +75,7 @@ static int crc_pwm_config(struct pwm_chip *c, struct pwm_device *pwm,
return -EINVAL;
}
- if (pwm->period != period_ns) {
+ if (pwm_get_period(pwm) != period_ns) {
int clk_div;
/* changing the clk divisor, need to disable fisrt */
diff --git a/drivers/pwm/pwm-lpc18xx-sct.c b/drivers/pwm/pwm-lpc18xx-sct.c
index 9163085101bc..52aba84a784e 100644
--- a/drivers/pwm/pwm-lpc18xx-sct.c
+++ b/drivers/pwm/pwm-lpc18xx-sct.c
@@ -249,7 +249,7 @@ static int lpc18xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
LPC18XX_PWM_EVSTATEMSK(lpc18xx_data->duty_event),
LPC18XX_PWM_EVSTATEMSK_ALL);
- if (pwm->polarity == PWM_POLARITY_NORMAL) {
+ if (pwm_get_polarity(pwm) == PWM_POLARITY_NORMAL) {
set_event = lpc18xx_pwm->period_event;
clear_event = lpc18xx_data->duty_event;
res_action = LPC18XX_PWM_RES_SET;
diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
index 67af9f62361f..03a99a53c39e 100644
--- a/drivers/pwm/pwm-sun4i.c
+++ b/drivers/pwm/pwm-sun4i.c
@@ -354,7 +354,8 @@ static int sun4i_pwm_probe(struct platform_device *pdev)
val = sun4i_pwm_readl(pwm, PWM_CTRL_REG);
for (i = 0; i < pwm->chip.npwm; i++)
if (!(val & BIT_CH(PWM_ACT_STATE, i)))
- pwm->chip.pwms[i].polarity = PWM_POLARITY_INVERSED;
+ pwm_set_polarity(&pwm->chip.pwms[i],
+ PWM_POLARITY_INVERSED);
clk_disable_unprepare(pwm->clk);
return 0;
--
2.12.0
--
To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org
To contact the owner, e-mail: opensuse-kernel+owner@opensuse.org
