Hallo Liste, als Neuling habe ich erstmal eine ganz generelle Frage. Mein Linux-Rechner (SuSE 6.3, Kernel 2.2.13) soll ueber eine ISDN-Leitung von einem entfernten WinNT-Client erreichbar sein. Er hat bislang eine Fritz!-Card, mit der ich mich als ippp0 erfolgreich mit T-online verbinde. Brauche ich fuer die Einwahl des WinNT-Clients eine zweite ISDN-Karte im Rechner, die dann ippp1 wird oder kann das alles mit der einen Karte abgewickelt werden ? Kann das zweite Interface ippp1 evtl. auch auf die gleiche (einzige) Karte zurueckgreifen ? Brauche ich ueberhaupt ein zweites Interface ? Im Augenblick (mit nur einer Karte und einem Interface ippp0) tritt bei einem Einwahlversuch folgendes Protokoll auf (xxxxxx ist die einwaehlende Nummer, yyyyyy ist die Nummer meines ippp0 Interfaces): Dec 28 11:45:46 compi-10 kernel: isdn_net: call from xxxxxx,7,0 -> yyyyyy Dec 28 11:45:46 compi-10 kernel: ippp0: call from xxxxxx -> yyyyyy accepted Dec 28 11:45:46 compi-10 isdnlog: Dec 28 11:45:46 * Call to tei 127 from +49 531/xxxxxx, Braunschweig on Daten_Compi-10 RING (Data) Dec 28 11:45:46 compi-10 isdnlog: Dec 28 11:45:46 Call to tei 92 from +49 531/xxxxxx, Braunschweig on Daten_Compi-10 CONNECT (Data) Dec 28 11:45:47 compi-10 ipppd[101]: Local number: yyyyyy, Remote number: 0191011, Type: incoming Dec 28 11:45:47 compi-10 ipppd[101]: PHASE_WAIT -> PHASE_ESTABLISHED, ifunit: 0, linkunit: 0, fd: 7 Dec 28 11:45:47 compi-10 kernel: isdn_net: ippp0 connected Dec 28 11:45:47 compi-10 kernel: isdn_net: chargetime of ippp0 now 43359024 Dec 28 11:45:50 compi-10 ipppd[101]: MPPP negotiation, He: No We: No Dec 28 11:45:50 compi-10 ipppd[101]: CCP enabled! Trying CCP. Dec 28 11:45:50 compi-10 ipppd[101]: CCP: got ccp-unit 0 for link 0 (protocol: 0x80fd) Dec 28 11:45:50 compi-10 ipppd[101]: ccp_resetci! Dec 28 11:45:51 compi-10 ipppd[101]: Could not determine local IP address Dec 28 11:45:51 compi-10 kernel: isdn_net: local hangup ippp0 Dec 28 11:45:51 compi-10 kernel: ippp0: Chargesum is 0 Dec 28 11:45:51 compi-10 ipppd[101]: Modem hangup Dec 28 11:45:51 compi-10 ipppd[101]: Connection terminated. Dec 28 11:45:51 compi-10 ipppd[101]: taking down PHASE_DEAD link 0, linkunit: 0 Dec 28 11:45:51 compi-10 ipppd[101]: closing fd 7 from unit 0 Dec 28 11:45:51 compi-10 ipppd[101]: link 0 closed , linkunit: 0 Dec 28 11:45:51 compi-10 ipppd[101]: reinit_unit: 0 Dec 28 11:45:51 compi-10 kernel: ippp, open, slot: 0, minor: 0, state: 0000 Dec 28 11:45:51 compi-10 kernel: ippp_ccp: allocating reset data structure Dec 28 11:45:51 compi-10 isdnlog: Dec 28 11:45:51 Call to tei 92 from +49 531/xxxxxx, Braunschweig on Daten_Compi-10 Normal call clearing (User) Dec 28 11:45:51 compi-10 ipppd[101]: Connect[0]: /dev/ippp0, fd: 7 Dec 28 11:45:51 compi-10 isdnlog: Dec 28 11:45:51 Call to tei 92 from +49 531/xxxxxx, Braunschweig on Daten_Compi-10 HANGUP ( 0:00:05) Merkwuerdigkeiten: in Zeile 5 steht unter Remote-number die Nummer der Telekom (was in diesem Fall ja nicht stimmt), dann scheint alles bis zu Zeile 13 zu laufen, wo mit 'Could not determine local IP adress' der Abbau der Verbindung beginnt. Ich bin sehr dankbar fuer Tipps aller Art, wie ich es schaffe, dass sich der WinNT-Rechner einwaehlen kann und ich trotzdem die Funktionalitaet der Provider-Anwahl behalte. Schon mal Allen einen guten Rutsch ohne Computer-(Y2K)-Probleme Gruss Norbert -- Norbert Boese Phone: +49 531 18533 Wassersport-Club Gifhorn e.V. Fax: +49 531 5923231 Webmaster http://www.wscg.de/ eMail: webmaster@wscg.de
Hallo Liste,
als Neuling habe ich erstmal eine ganz generelle Frage. Mein Linux-Rechner (SuSE 6.3, Kernel 2.2.13) soll ueber eine ISDN-Leitung von einem entfernten WinNT-Client erreichbar sein. Er hat bislang eine Fritz!-Card, mit der ich mich als ippp0 erfolgreich mit T-online verbinde.
Brauche ich fuer die Einwahl des WinNT-Clients eine zweite ISDN-Karte im Rechner, die dann ippp1 wird oder kann das alles mit der einen Karte abgewickelt werden ? Kann das zweite Interface ippp1 evtl. auch auf die gleiche (einzige) Karte zurueckgreifen ? Brauche ich ueberhaupt ein zweites Interface ?
Im Augenblick (mit nur einer Karte und einem Interface ippp0) tritt bei einem Einwahlversuch folgendes Protokoll auf (xxxxxx ist die einwaehlende Nummer, yyyyyy ist die Nummer meines ippp0 Interfaces):
Dec 28 11:45:46 compi-10 kernel: isdn_net: call from xxxxxx,7,0 -> yyyyyy Dec 28 11:45:46 compi-10 kernel: ippp0: call from xxxxxx -> yyyyyy accepted Dec 28 11:45:46 compi-10 isdnlog: Dec 28 11:45:46 * Call to tei 127 from +49 531/xxxxxx, Braunschweig on Daten_Compi-10 RING (Data) Dec 28 11:45:46 compi-10 isdnlog: Dec 28 11:45:46 Call to tei 92 from +49 531/xxxxxx, Braunschweig on Daten_Compi-10 CONNECT (Data) Dec 28 11:45:47 compi-10 ipppd[101]: Local number: yyyyyy, Remote number: 0191011, Type: incoming Dec 28 11:45:47 compi-10 ipppd[101]: PHASE_WAIT -> PHASE_ESTABLISHED, ifunit: 0, linkunit: 0, fd: 7 Dec 28 11:45:47 compi-10 kernel: isdn_net: ippp0 connected Dec 28 11:45:47 compi-10 kernel: isdn_net: chargetime of ippp0 now 43359024 Dec 28 11:45:50 compi-10 ipppd[101]: MPPP negotiation, He: No We: No Dec 28 11:45:50 compi-10 ipppd[101]: CCP enabled! Trying CCP. Dec 28 11:45:50 compi-10 ipppd[101]: CCP: got ccp-unit 0 for link 0 (protocol: 0x80fd) Dec 28 11:45:50 compi-10 ipppd[101]: ccp_resetci! Dec 28 11:45:51 compi-10 ipppd[101]: Could not determine local IP address Dec 28 11:45:51 compi-10 kernel: isdn_net: local hangup ippp0 Dec 28 11:45:51 compi-10 kernel: ippp0: Chargesum is 0 Dec 28 11:45:51 compi-10 ipppd[101]: Modem hangup Dec 28 11:45:51 compi-10 ipppd[101]: Connection terminated. Dec 28 11:45:51 compi-10 ipppd[101]: taking down PHASE_DEAD link 0,
Hallo, ich habe seit ein paar Tagen dieses Problem wie folgt gelöst. Der NT-Client ist mit einer 100MBit Karte ausgestattet und der Linux-Rechner besitzt sowohl eine ISDN Fritz PCI als auch eine 100MBit Karte. Der Linux-Rechner arbeitet als ISDN Router, wenn auf dem NT Client Netzanfragen für den Neztbereich außerhalb des lokalen LAN erfolgen (z.B. www.leo.org auf Netscape mit WinNT). LInux baut dann sofort eine Verbindung mit ISDN zum Provider auf und horcht den ISDN Verkehr ab. Erfolgt nach 60Sekunden keine weitere Übertragung über ISDN wird die Telefonverb. gekappt. Voraussetzungen für obiges System (siehe auch www.tlab.ch/router) WinNT mit TCPIP-Protokoll, als Gateway wird die 100MBit-Adresse des Linux-Routers angegeben. Linux mit ISDN und TCPIP Unterstützung /etc/route.conf muß richtig geseetzt sein, siehe dazu man route.conf oder SuSE-Handbuch. Bei mir funktionierte alles fast auf Anhieb. Viel Erfolg! Wolfgang At 14:11 29.12.99 +0100, Dr Norbert Boese wrote: linkunit: 0
Dec 28 11:45:51 compi-10 ipppd[101]: closing fd 7 from unit 0 Dec 28 11:45:51 compi-10 ipppd[101]: link 0 closed , linkunit: 0 Dec 28 11:45:51 compi-10 ipppd[101]: reinit_unit: 0 Dec 28 11:45:51 compi-10 kernel: ippp, open, slot: 0, minor: 0, state: 0000 Dec 28 11:45:51 compi-10 kernel: ippp_ccp: allocating reset data structure Dec 28 11:45:51 compi-10 isdnlog: Dec 28 11:45:51 Call to tei 92 from +49 531/xxxxxx, Braunschweig on Daten_Compi-10 Normal call clearing (User) Dec 28 11:45:51 compi-10 ipppd[101]: Connect[0]: /dev/ippp0, fd: 7 Dec 28 11:45:51 compi-10 isdnlog: Dec 28 11:45:51 Call to tei 92 from +49 531/xxxxxx, Braunschweig on Daten_Compi-10 HANGUP ( 0:00:05)
Merkwuerdigkeiten: in Zeile 5 steht unter Remote-number die Nummer der Telekom (was in diesem Fall ja nicht stimmt), dann scheint alles bis zu Zeile 13 zu laufen, wo mit 'Could not determine local IP adress' der Abbau der Verbindung beginnt.
Ich bin sehr dankbar fuer Tipps aller Art, wie ich es schaffe, dass sich der WinNT-Rechner einwaehlen kann und ich trotzdem die Funktionalitaet der Provider-Anwahl behalte.
Schon mal Allen einen guten Rutsch ohne Computer-(Y2K)-Probleme
Gruss Norbert
-- Norbert Boese Phone: +49 531 18533 Wassersport-Club Gifhorn e.V. Fax: +49 531 5923231 Webmaster http://www.wscg.de/ eMail: webmaster@wscg.de
--------------------------------------------------------------------- To unsubscribe, e-mail: suse-isdn-unsubscribe@suse.com For additional commands, e-mail: suse-isdn-help@suse.com
********************************************* * Wolfgang Ganzert Institut fuer Strahlantriebe Universitaet der Bundeswehr Muenchen Werner Heisenberg Weg 39 D-85577 Neubiberg Germany e-mail: Wolfgang.Ganzert@unibw-muenchen.de Phone: 089/6004-3037 or -3035 Fax: 089/6004-4092 * *********************************************
On Wed, Dec 29, 1999 at 02:11:18PM +0100, Dr Norbert Boese wrote:
Hallo Liste,
als Neuling habe ich erstmal eine ganz generelle Frage. Mein Linux-Rechner (SuSE 6.3, Kernel 2.2.13) soll ueber eine ISDN-Leitung von einem entfernten WinNT-Client erreichbar sein. Er hat bislang eine Fritz!-Card, mit der ich mich als ippp0 erfolgreich mit T-online verbinde.
Brauche ich fuer die Einwahl des WinNT-Clients eine zweite ISDN-Karte im Rechner, die dann ippp1 wird oder kann das alles mit der einen Karte abgewickelt werden ? Kann das zweite Interface ippp1 evtl. auch auf die gleiche (einzige) Karte zurueckgreifen ? Brauche ich ueberhaupt ein zweites Interface ?
Du brauchst keine 2. Karte, aber ein zweites Interface ippp1, der der ipppd mit anderen Optionen gestartet werden muss (fuer Einwahl, z.B. dass er dem anderen eine IP-Nummer uebermittelt).
Im Augenblick (mit nur einer Karte und einem Interface ippp0) tritt bei einem Einwahlversuch folgendes Protokoll auf (xxxxxx ist die einwaehlende Nummer, yyyyyy ist die Nummer meines ippp0 Interfaces):
Dec 28 11:45:46 compi-10 kernel: isdn_net: call from xxxxxx,7,0 -> yyyyyy Dec 28 11:45:46 compi-10 kernel: ippp0: call from xxxxxx -> yyyyyy accepted Dec 28 11:45:46 compi-10 isdnlog: Dec 28 11:45:46 * Call to tei 127 from +49 531/xxxxxx, Braunschweig on Daten_Compi-10 RING (Data) Dec 28 11:45:46 compi-10 isdnlog: Dec 28 11:45:46 Call to tei 92 from +49 531/xxxxxx, Braunschweig on Daten_Compi-10 CONNECT (Data) Dec 28 11:45:47 compi-10 ipppd[101]: Local number: yyyyyy, Remote number: 0191011, Type: incoming
Ok, der ipppd selbst bekommt nicht die richtige Nummer mit; ist aber auch egal, da er damit eh nicht anfangen koennte.
Dec 28 11:45:51 compi-10 ipppd[101]: Could not determine local IP address Dec 28 11:45:51 compi-10 kernel: isdn_net: local hangup ippp0
Klar, der "Client" teilt ihm keine mit... Lege Dir mit YaST ein zweites Interface ippp1 an, damit erhaelst Du auch ein /etc/ppp/options.ippp1, das aenderst Du manuell, ungefaehr so: --------------- # accept IP addresses from peer # use with dynamic IP #ipcp-accept-local #ipcp-accept-remote #noipdefault # try to get IP address from interface # option specific to ipppd (as opposed to pppd) # use only with static IP useifip # If this machine is a server, force authentication by uncommenting one # of the following. However, if this machine is a client, doing this will # prevent a succesful connection! (message "peer refused to authenticate"). # So, only uncomment on a server. # "+pap" / "+chap" NUR AKTIVIEREN, WENN DIES EIN SERVER IST!!! +pap +chap --------------- Den Rest so belassen. Am besten zum Debuggen zusaetzlich noch: --------------- debug +pwlog --------------- Die Einwahl sollte _nur_ auf ippp1, nicht auf ippp0 moeglich sein, siehe YaST-Maske. -- Klaus Franken, mail@klaus.franken.de ------------------------------------------------------------ D O N ' T P A N I C !!! ------------------------------------------------------------ LINUX-ISDN-HOWTO: http://www.franken.de/users/klaus ------------------------------------------------------------ Uptime: Linux 2.2.13, 1 Days, 22:43 Hours
participants (3)
-
Dr Norbert Boese
-
Klaus Franken
-
Wolfgang Ganzert