Hallo Liste, als Neuling habe ich erstmal eine ganz generelle Frage. Mein Linux-Rechner (SuSE 6.3, Kernel 2.2.13) soll ueber eine ISDN-Leitung von einem entfernten WinNT-Client erreichbar sein. Er hat bislang eine Fritz!-Card, mit der ich mich als ippp0 erfolgreich mit T-online verbinde. Brauche ich fuer die Einwahl des WinNT-Clients eine zweite ISDN-Karte im Rechner, die dann ippp1 wird oder kann das alles mit der einen Karte abgewickelt werden ? Kann das zweite Interface ippp1 evtl. auch auf die gleiche (einzige) Karte zurueckgreifen ? Brauche ich ueberhaupt ein zweites Interface ? Im Augenblick (mit nur einer Karte und einem Interface ippp0) tritt bei einem Einwahlversuch folgendes Protokoll auf (xxxxxx ist die einwaehlende Nummer, yyyyyy ist die Nummer meines ippp0 Interfaces): Dec 28 11:45:46 compi-10 kernel: isdn_net: call from xxxxxx,7,0 -> yyyyyy Dec 28 11:45:46 compi-10 kernel: ippp0: call from xxxxxx -> yyyyyy accepted Dec 28 11:45:46 compi-10 isdnlog: Dec 28 11:45:46 * Call to tei 127 from +49 531/xxxxxx, Braunschweig on Daten_Compi-10 RING (Data) Dec 28 11:45:46 compi-10 isdnlog: Dec 28 11:45:46 Call to tei 92 from +49 531/xxxxxx, Braunschweig on Daten_Compi-10 CONNECT (Data) Dec 28 11:45:47 compi-10 ipppd[101]: Local number: yyyyyy, Remote number: 0191011, Type: incoming Dec 28 11:45:47 compi-10 ipppd[101]: PHASE_WAIT -> PHASE_ESTABLISHED, ifunit: 0, linkunit: 0, fd: 7 Dec 28 11:45:47 compi-10 kernel: isdn_net: ippp0 connected Dec 28 11:45:47 compi-10 kernel: isdn_net: chargetime of ippp0 now 43359024 Dec 28 11:45:50 compi-10 ipppd[101]: MPPP negotiation, He: No We: No Dec 28 11:45:50 compi-10 ipppd[101]: CCP enabled! Trying CCP. Dec 28 11:45:50 compi-10 ipppd[101]: CCP: got ccp-unit 0 for link 0 (protocol: 0x80fd) Dec 28 11:45:50 compi-10 ipppd[101]: ccp_resetci! Dec 28 11:45:51 compi-10 ipppd[101]: Could not determine local IP address Dec 28 11:45:51 compi-10 kernel: isdn_net: local hangup ippp0 Dec 28 11:45:51 compi-10 kernel: ippp0: Chargesum is 0 Dec 28 11:45:51 compi-10 ipppd[101]: Modem hangup Dec 28 11:45:51 compi-10 ipppd[101]: Connection terminated. Dec 28 11:45:51 compi-10 ipppd[101]: taking down PHASE_DEAD link 0, linkunit: 0 Dec 28 11:45:51 compi-10 ipppd[101]: closing fd 7 from unit 0 Dec 28 11:45:51 compi-10 ipppd[101]: link 0 closed , linkunit: 0 Dec 28 11:45:51 compi-10 ipppd[101]: reinit_unit: 0 Dec 28 11:45:51 compi-10 kernel: ippp, open, slot: 0, minor: 0, state: 0000 Dec 28 11:45:51 compi-10 kernel: ippp_ccp: allocating reset data structure Dec 28 11:45:51 compi-10 isdnlog: Dec 28 11:45:51 Call to tei 92 from +49 531/xxxxxx, Braunschweig on Daten_Compi-10 Normal call clearing (User) Dec 28 11:45:51 compi-10 ipppd[101]: Connect[0]: /dev/ippp0, fd: 7 Dec 28 11:45:51 compi-10 isdnlog: Dec 28 11:45:51 Call to tei 92 from +49 531/xxxxxx, Braunschweig on Daten_Compi-10 HANGUP ( 0:00:05) Merkwuerdigkeiten: in Zeile 5 steht unter Remote-number die Nummer der Telekom (was in diesem Fall ja nicht stimmt), dann scheint alles bis zu Zeile 13 zu laufen, wo mit 'Could not determine local IP adress' der Abbau der Verbindung beginnt. Ich bin sehr dankbar fuer Tipps aller Art, wie ich es schaffe, dass sich der WinNT-Rechner einwaehlen kann und ich trotzdem die Funktionalitaet der Provider-Anwahl behalte. Schon mal Allen einen guten Rutsch ohne Computer-(Y2K)-Probleme Gruss Norbert -- Norbert Boese Phone: +49 531 18533 Wassersport-Club Gifhorn e.V. Fax: +49 531 5923231 Webmaster http://www.wscg.de/ eMail: webmaster@wscg.de