![](https://seccdn.libravatar.org/avatar/1380bc6943a548925d68775fedf634b8.jpg?s=120&d=mm&r=g)
Moin Karsten! Danke für Dein durchhalten ;)
Also IRQ 3 oder 4 funktioniert auf den meisten Boards nicht 5,7,9 sind meist die besten Kandidaten. hm, soso...
"isapnp.conf" 56L, 2006C written /etc # capiinit stop /etc # isapnp isapnp.conf Board 1 has Identity c6 ff ff ff ff 00 09 cd 06: AVM0900 Serial No -1 [checksum c6] isapnp.conf:46 -- Fatal - IO range check attempted while device activated isapnp.conf:46 -- Fatal - Error occurred executing request '<IORESCHECK> ' --- further action aborted /etc # capiinit start Warning: loading /lib/modules/2.4.20-4GB/misc/fcpnp.o will taint the kernel: non-GPL license - Proprietary See http://www.tux.org/lkml/#export-tainted for information about tainted modules Module fcpnp loaded, with warnings /etc #
Was sagt den jetzt cat /proc/interrupt # cat /proc/interrupts CPU0 0: 74667 XT-PIC timer 1: 7 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 0 XT-PIC fcpnp 8: 2 XT-PIC rtc 10: 3581 XT-PIC eth1 11: 5399 XT-PIC VIA686A, eth0, usb-uhci, usb-uhci 12: 17 XT-PIC PS/2 Mouse 14: 5977 XT-PIC ide0 15: 1 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 MIS: 0
und capiinfo ? # capiinfo Number of Controllers : 1 Controller 1: Manufacturer: AVM GmbH CAPI Version: 2.0 Manufacturer Version: 3.100-02 (49.2) Serial Number: 1000001 BChannels: 2 Global Options: 0x00000039 internal controller supported DTMF supported Supplementary Services supported channel allocation supported (leased lines) B1 protocols support: 0x4000011f 64 kbit/s with HDLC framing 64 kbit/s bit-transparent operation V.110 asynconous operation with start/stop byte framing V.110 synconous operation with HDLC framing T.30 modem for fax group 3 Modem asyncronous operation with start/stop byte framing B2 protocols support: 0x00000b1b ISO 7776 (X.75 SLP) Transparent LAPD with Q.921 for D channel X.25 (SAPI 16) T.30 fro fax group 3 ISO 7776 (X.75 SLP) with V.42bis compression V.120 asyncronous mode V.120 bit-transparent mode B3 protocols support: 0x800000bf Transparent T.90NL, T.70NL, T.90 ISO 8208 (X.25 DTE-DTE) X.25 DCE T.30 for fax group 3 reserved
0100 0200 39000000 1f010040 1b0b0000 bf000080 00000000 00000000 00000000 00000000 00000000 00000000 01000001 00020000 00000000 00000000 00000000 Supplementary services support: 0x000003ff Hold / Retrieve Terminal Portability ECT 3PTY Call Forwarding Call Deflection MCID CCBS
Was passiert beim minicom test ? No DIALTONE, obwohl ich den eben schonmal auf NO CARRIER hatte, aber ich habe dann neugestartet.
(eventuell noch ein modprobe capidrv notwendig, falls nur ccapiinit benutzt wurde und nicht rcisdn start) rcisdn wird beim booten gestartet und da gibts auch keine Fehlermeldung.
Was macht der Bootparameter noacpi? Ist das dass PowerManagement das ausgeschaltet wird? Jain, ACPI ist nur zum Teil Power Managment, sondern dient in erster Linie der Konfiguration der Onboard Komponenten, wie Interruptcontroller, PCI usw. Leider sind manche BIOS Versionen nicht voll ACPI kompatibel, was dann zu Problemen führt. Aha... muss man alles wissen.
Nun steht in der datei, isapnp.conf ja immernoch: # Number of IO addresses required: 32 (IO 0 (SIZE 32) (BASE 0x0200) (CHECK)) # IRQ 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15. # High true, edge sensitive interrupt (INT 0 (IRQ 3 (MODE +E))) Aber cat interrupts sagt ja er liegt auf 5, das checke ich nicht... Lars PS: By the way, gibts es hier eine aussicht auf Lösung, oder soll ich mir bitte gerne eine PCIFritzCard kaufen gehen??? ;)