Hallo ISDNler, ich habe auf meinem Pentium III/1 GHz- System mit ELSA Microlink PCI ISDN-Karte, das bislang unter SuSE 7.2 Professional, Kernel 2.4.10, lief, eine komplette _Neuinstallation_ auf SuSE 8.0 durchgeführt und mich dabei an die Vorgaben der automatischen Hardwareerkennung gehalten. Unter dem neuen System bekomme ich aber keine ISDN- Verbindung. Der Fehler äußert sich so: Die automatische HW-Erkennung von YaST2 "diagnostizierte" anstelle der Microlink PCI eine "Quickstep 1000", ebenfalls von ELSA. Dann suchte ich manuell die richtige Karte heraus, und führte den Treibertest durch, der auch positiv verlief. Nach dem Speichern wurde dann allerdings wieder die Quickstep 1000 angezeigt. An und Pfirsich ist die Microlink ja verträglich, und unter 7.2 hatte ich auch keine Probleme. Für den Internetzugang verwende ich, wie schon in der Vorgängerversion, kinternet. Beim Anklicken des Steckersymbols erfolgt keine sichtbare Reaktion, und alle Ping-Versuche nach draußen bleiben negativ. "Protokoll ansehen" meldet aber eine positive Verbindungsaufnahme. Die Kontextmenüpunkte "Einwahl", "Auflegen", "Start" sind nicht aktivierbar. Hat schon mal jemand etwas ähnliches erlebt oder sonst eine Idee, woran das liegen könnte? Danke, Daniel =============================== Anhänge ============================== -------------------------------------------- Protokoll von kinternet ------------------------------------------- SuSE Meta pppd (smpppd), Version 0.73 on linux. wwwoffle not is running Selection of interface/provider "ippp0"/"Innenstadt" succeeded. Starting connection. (2002-08-06 20:42:18 CEST) -------------------------------------------- /tmp/siga.txt ------------------------------------------- (...snip) 1.7 hwinfo-isdn 18: PCI 0b.0: 10300 ISDN Adapter [Created at pci.65] Unique ID: gZD2.O258dgix3E3 Hardware Class: isdn adapter Model: "Elsa QuickStep 1000" Vendor: 1048 "Elsa AG" Device: 1000 "QuickStep 1000" SubVendor: 1048 "Elsa AG" SubDevice: 1000 "?" Revision: 0x02 Memory Range: 0xda001000-??? (rw,non-prefetchable) I/O Ports: 0xd000-??? (rw) I/O Ports: 0xd400-??? (rw) IRQ: 5 (3 events) Driver Info #0: I4L Type: 18/12 [Elsa Microlink PCI] ----------------- 2.1 /var/log/messages (...snip) Aug 6 20:03:49 linux kernel: eth0: Davicom DM9102/DM9102A rev 49 at 0xcc00, 00:80:AD:70:B9:56, IRQ 10. Aug 6 20:03:52 linux smpppd[4695]: smpppd version 0.73 started Aug 6 20:03:57 linux /etc/hotplug/net.agent[4221]: No HW description found ... exiting Aug 6 20:04:03 linux init: Entering runlevel: 5 Aug 6 20:04:04 linux kernel: isapnp: Scanning for PnP cards... Aug 6 20:04:04 linux kernel: isapnp: No Plug & Play device found Aug 6 20:04:04 linux kernel: CSLIP: code copyright 1989 Regents of the University of California Aug 6 20:04:04 linux kernel: ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded Aug 6 20:04:04 linux kernel: HiSax: Linux Driver for passive ISDN cards Aug 6 20:04:04 linux kernel: HiSax: Version 3.5 (module) Aug 6 20:04:04 linux kernel: HiSax: Layer1 Revision 1.1.4.1 Aug 6 20:04:04 linux kernel: HiSax: Layer2 Revision 1.1.4.1 Aug 6 20:04:04 linux kernel: HiSax: TeiMgr Revision 1.1.4.1 Aug 6 20:04:04 linux kernel: HiSax: Layer3 Revision 1.1.4.1 Aug 6 20:04:04 linux kernel: HiSax: LinkLayer Revision 1.1.4.1 Aug 6 20:04:04 linux kernel: HiSax: Approval certification valid Aug 6 20:04:04 linux kernel: HiSax: Approved with ELSA Microlink PCI cards Aug 6 20:04:04 linux kernel: HiSax: Approved with Eicon Technology Diva 2.01 PCI cards Aug 6 20:04:04 linux kernel: HiSax: Approved with Sedlbauer Speedfax + cards Aug 6 20:04:04 linux kernel: HiSax: Approved with HFC-S PCI A based cards Aug 6 20:04:04 linux kernel: HiSax: Total 1 card defined Aug 6 20:04:04 linux kernel: HiSax: Card 1 Protocol EDSS1 Id=contr0 (0) Aug 6 20:04:04 linux kernel: HiSax: Elsa driver Rev. 1.1.4.1 Aug 6 20:04:04 linux kernel: Elsa: Microlink PCI defined at 0xd800/0xd400 IRQ 5 Aug 6 20:04:04 linux kernel: Elsa: IPAC version 2 Aug 6 20:04:04 linux kernel: Elsa PCI: IRQ 5 count 3 Aug 6 20:04:04 linux kernel: Elsa PCI: IRQ 5 count 6 Aug 6 20:04:04 linux kernel: HiSax: DSS1 Rev. 1.1.4.1 Aug 6 20:04:04 linux kernel: HiSax: 2 channels added Aug 6 20:04:04 linux kernel: HiSax: MAX_WAITING_CALLS added Aug 6 20:04:04 linux kernel: HiSax: debugging flags card 1 set to 4 Aug 6 20:04:04 linux kernel: HiSax: debugging flags card 1 set to 4 Aug 6 20:04:04 linux isdnlog: isdnlog Version 4.56 starting Aug 6 20:04:04 linux isdnlog: Holiday Version 1.10-Germany [12-Apr-1999] loaded [11 entries from /usr/lib/isdn/holiday- de.dat] Aug 6 20:04:04 linux isdnlog: Dest V1.01: File '/usr/lib/isdn/dest.cdb' opened fine - Dest 1.0 int (+h) AT DE NL CH Aug 6 20:04:05 linux isdnlog: Zone V1.25: Provider 0 File '/usr/lib/isdn/zone-de-dtag.cdb' opened fine - V1.25 K2 C2 N256 T157147 O1 L5 Aug 6 20:04:05 linux isdnlog: Rates Version 2.01rc2 [26- Jan-2002 20:46:13] loaded [43 Providers, 277 Zones, 1368 Areas, 42 Services, 266 Comments, 0 eXceptions, 4 Redirects, 912 Rates from /usr/lib/isdn/rate-de.dat] Aug 6 20:04:05 linux isdnlog: (ISDN subsystem with ISDN_MAX_CHANNELS > 16 detected, ioctl(IIOCNETGPN) is available) Aug 6 20:04:05 linux isdnlog: isdn.conf:2 active channels, 2 MSN/SI entries Aug 6 20:04:05 linux isdnlog: (Data versions: iprofd=0x06 net_cfg=0x06 /dev/isdninfo=0x01) Aug 6 20:04:05 linux isdnlog: Everything is fine, isdnlog- 4.56 is running in full featured mode. Aug 6 20:04:05 linux kernel: Kernel logging (proc) stopped. Aug 6 20:04:05 linux kernel: Kernel log daemon terminating. Aug 6 20:04:06 linux exiting on signal 15 Aug 6 20:04:06 linux syslogd 1.4.1: restart. Aug 6 20:04:11 linux kernel: klogd 1.4.1, log source = /proc/kmsg started. Aug 6 20:04:11 linux kernel: Inspecting /boot/System.map- 2.4.18-64GB-SMP Aug 6 20:04:11 linux kernel: Loaded 13537 symbols from /boot/System.map-2.4.18-64GB-SMP. Aug 6 20:04:11 linux kernel: Symbols match kernel version 2.4.18. Aug 6 20:04:11 linux kernel: Loaded 699 symbols from 29 modules. Aug 6 20:04:12 linux kernel: IPv6 v0.8 for NET4.0 Aug 6 20:04:12 linux kernel: IPv6 over IPv4 tunneling driver Aug 6 20:04:12 linux sshd[5200]: Server listening on :: port 22. Aug 6 20:04:12 linux kernel: lp0: using parport0 (polling). Aug 6 20:04:12 linux kernel: lp0: compatibility mode Aug 6 20:04:13 linux /usr/sbin/cron[5320]: (CRON) STARTUP (fork ok) Aug 6 20:04:14 linux modprobe: modprobe: Can't locate module char-major-10-134 Aug 6 20:04:20 linux /etc/hotplug/net.agent[5213]: No HW description found ... exiting Aug 6 20:04:23 linux kernel: eth0: no IPv6 routers present Aug 6 20:04:36 linux kdm[5470]: pam_unix2: session started for user daniel, service xdm Aug 6 20:04:40 linux kernel: hdg: status error: status=0x58 { DriveReady SeekComplete DataRequest } Aug 6 20:04:40 linux kernel: hdg: drive not ready for command Aug 6 20:04:45 linux kernel: hdg: status error: status=0x58 { DriveReady SeekComplete DataRequest } Aug 6 20:04:45 linux kernel: hdg: drive not ready for command Aug 6 20:04:51 linux kernel: hdg: status error: status=0x58 { DriveReady SeekComplete DataRequest } Aug 6 20:04:51 linux kernel: hdg: drive not ready for command Aug 6 20:04:51 linux kernel: hdg: status error: status=0x58 { DriveReady SeekComplete DataRequest } Aug 6 20:04:51 linux kernel: hdg: drive not ready for command Aug 6 20:05:11 linux kernel: hdg: status error: status=0xd0 { Busy } Aug 6 20:05:11 linux kernel: hdg: drive not ready for command Aug 6 20:05:12 linux kernel: ide3: reset: success Aug 6 20:06:02 linux kernel: ide-scsi: hda: unsupported command in request queue (0) Aug 6 20:06:02 linux kernel: end_request: I/O error, dev 03:00 (hda), sector 0 Aug 6 20:06:02 linux kernel: ide-scsi: hda: unsupported command in request queue (0) Aug 6 20:06:02 linux kernel: end_request: I/O error, dev 03:00 (hda), sector 2 Aug 6 20:06:02 linux kernel: ide-scsi: hda: unsupported command in request queue (0) Aug 6 20:06:02 linux kernel: end_request: I/O error, dev 03:00 (hda), sector 4 Aug 6 20:06:02 linux kernel: ide-scsi: hda: unsupported command in request queue (0) Aug 6 20:06:02 linux kernel: end_request: I/O error, dev 03:00 (hda), sector 6 Aug 6 20:06:02 linux kernel: VFS: Disk change detected on device ide0(3,0) Aug 6 20:06:02 linux kernel: ide-scsi: hda: unsupported command in request queue (0) Aug 6 20:06:02 linux kernel: end_request: I/O error, dev 03:00 (hda), sector 0 Aug 6 20:06:02 linux kernel: FAT: unable to read boot sector Aug 6 20:07:01 linux modprobe: modprobe: Can't locate module char-major-10-134 Aug 6 20:07:01 linux kdm[5470]: pam_unix2: session finished for user daniel, service xdm Aug 6 20:07:05 linux init: Switching to runlevel: 0 Aug 6 20:07:07 linux smpppd[4696]: terminating on signal 15 Aug 6 20:07:07 linux sshd[5200]: Received signal 15; terminating. Aug 6 20:07:07 linux kernel: Kernel logging (proc) stopped. Aug 6 20:07:07 linux kernel: Kernel log daemon terminating. Aug 6 20:07:08 linux exiting on signal 15 Aug 6 20:09:36 linux syslogd 1.4.1: restart. Aug 6 20:09:37 linux insmod: insmod: a module named sg already exists Aug 6 20:09:37 linux insmod: insmod: insmod char-major-21 failed Aug 6 20:09:37 linux insmod: insmod: a module named sg already exists Aug 6 20:09:37 linux insmod: insmod: insmod char-major-21 failed Aug 6 20:09:37 linux insmod: insmod: a module named st already exists Aug 6 20:09:37 linux insmod: insmod: insmod char-major-9 failed Aug 6 20:09:41 linux kernel: klogd 1.4.1, log source = /proc/kmsg started. Aug 6 20:09:41 linux kernel: Inspecting /boot/System.map- 2.4.18-64GB-SMP Aug 6 20:09:41 linux kernel: Loaded 13537 symbols from /boot/System.map-2.4.18-64GB-SMP. Aug 6 20:09:41 linux kernel: Symbols match kernel version 2.4.18. Aug 6 20:09:41 linux kernel: Loaded 335 symbols from 15 modules. Aug 6 20:09:41 linux kernel: isapnp: Scanning for PnP cards... Aug 6 20:09:41 linux kernel: isapnp: No Plug & Play device found Aug 6 20:09:41 linux kernel: CSLIP: code copyright 1989 Regents of the University of California Aug 6 20:09:41 linux kernel: ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded Aug 6 20:09:41 linux kernel: HiSax: Linux Driver for passive ISDN cards Aug 6 20:09:41 linux kernel: HiSax: Version 3.5 (module) Aug 6 20:09:41 linux kernel: HiSax: Layer1 Revision 1.1.4.1 Aug 6 20:09:41 linux kernel: HiSax: Layer2 Revision 1.1.4.1 Aug 6 20:09:41 linux kernel: HiSax: TeiMgr Revision 1.1.4.1 Aug 6 20:09:41 linux kernel: HiSax: Layer3 Revision 1.1.4.1 Aug 6 20:09:41 linux kernel: HiSax: LinkLayer Revision 1.1.4.1 Aug 6 20:09:41 linux kernel: HiSax: Approval certification valid Aug 6 20:09:41 linux kernel: HiSax: Approved with ELSA Microlink PCI cards Aug 6 20:09:41 linux kernel: HiSax: Approved with Eicon Technology Diva 2.01 PCI cards Aug 6 20:09:41 linux kernel: HiSax: Approved with Sedlbauer Speedfax + cards Aug 6 20:09:41 linux kernel: HiSax: Approved with HFC-S PCI A based cards Aug 6 20:09:41 linux kernel: HiSax: Total 1 card defined Aug 6 20:09:41 linux kernel: HiSax: Card 1 Protocol EDSS1 Id=contr0 (0) Aug 6 20:09:41 linux kernel: HiSax: Elsa driver Rev. 1.1.4.1 Aug 6 20:09:41 linux kernel: Elsa: Microlink PCI defined at 0xd400/0xd000 IRQ 5 Aug 6 20:09:41 linux kernel: Elsa: IPAC version 2 Aug 6 20:09:41 linux kernel: Elsa PCI: IRQ 5 count 0 Aug 6 20:09:41 linux kernel: Elsa PCI: IRQ 5 count 3 Aug 6 20:09:41 linux kernel: HiSax: DSS1 Rev. 1.1.4.1 Aug 6 20:09:41 linux kernel: HiSax: 2 channels added (...snip) 3.1 /etc/ppp/ioptions # /etc/ppp/ioptions # for isdn4linux/syncPPP global options for ipppd # # # Klaus Franken # Version: 15.05.97 (5.0) # # lock # Set 'debug' to create a lot of information in /var/log/messages #debug # Set '+pwlog' for logging passwords in /var/log/messages #+pwlog debug -------------------------------------------------------------- ----------------- 3.2 isdn_cfg /etc/sysconfig/isdn/cfg-contr0 AREACODE="02204" DEBUG="4" DIALPREFIX="" DRIVER="hisax" NAME="Elsa Microlink PCI" PARA_IO="" PARA_IRQ="" PARA_MEMBASE="" PARA_SUBTYPE="12" PARA_TYPE="18" PROTOCOL="euro" STARTMODE="onboot" UNIQUE="" -------------------------------------------------------------- ----------------- 3.3 isdn net config /etc/sysconfig/isdn/cfg-net0 CALLBACK="off" CHARGEHUP="on" COMPRESSION="no" DEFAULTROUTE="yes" DIALMODE="manual" DYNAMICIP="yes" FIREWALL="no" IDLETIME="300" IPADDR="0.0.0.0" MSN="0" MULTILINK="no" PROTOCOL="syncppp" PROVIDER="NetCologne" PTPADDR="0.0.0.0" STARTMODE="onboot" USEPEERDNS="yes" -------------------------------------------------------------- ----------------- 3.7 smpppd.conf # see "man smpppd" and "man smpppd.conf" for more information # note: values in /var/lib/smpppd/smpppd.var.conf have higher priority wwwoffle-use = no wwwoffle-fetch = no stop-on-disconnect = notdemand open-inet-socket = no number-of-loglines = 250 -------------------------------------------------------------- ----------------- 3.8 isdnctrl no ISDN info found -------------------------------------------------------------- ----------------- 11. network -------------------------------------------------------------- /etc/sysconfig/network/ifcfg-ippp0 # # DO NOT EDIT THIS FILE !!! # autogenerated by SuSEconfig.isdn from /etc/sysconfig/isdn/cfg-net0 # edit /etc/sysconfig/isdn/cfg-net0 instead and run # SuSEconfig --module isdn # STARTMODE="onboot" IPADDR="0.0.0.0" PTPADDR="0.0.0.0" DEFAULTROUTE="yes" FIREWALL="no" MSN="0" DIALMODE="manual" DIALPREFIX="" REMOTE_OUT="" REMOTE_IN="" PROVIDER="NetCologne" CHARGEHUP="on" IDLETIME="300" SLAVES="" MULTILINK="no" DEVICE="ippp0" LAYER2="hdlc" LAYER3="trans" ENCAP="syncppp" IP_RESEND="" IP_RESEND_PARAMETER="" DYNAMICIP="yes" USEPEERDNS="yes" IPPPD_OPTIONS="" ASKPASSWORD=""