Am Donnerstag, 20. Januar 2005 16:15 schrieb Karsten Keil: hab jetzt alles ausprobiert: pci=noapci : genauso ist apci=off Ergebnis kann kein fax senden Meldung von kdefaxprogramm: KDEPrint-Fax-Log Eingabedateien in PostScript umwandeln Fax wird gesendet an: 420449 () Überspielung an Fax mit /usr/bin/capisuitefax -d '420449' '/tmp/kde-ja/kdeprint_n8OLmwCJ' Traceback (most recent call last): File "/usr/bin/capisuitefax", line 203, in ? cs_helpers.writeDescription(newname,"dialstring=\""+dialstring+"\"\n" File "/usr/lib/python2.3/site-packages/cs_helpers.py", line 283, in writeDescription descr=open(filename[:filename.rindex('.')+1]+"txt","w") IOErro : [Errno 13] Permission denied: '/var/spool/capisuite/users/ja/sendq/fax-0.txt Capiinfo usw. melden: ja@linux:~> su Password: linux:/home/ja # cat /proc/interrupts CPU0 0: 152664 XT-PIC timer 1: 143 XT-PIC i8042 2: 0 XT-PIC cascade 5: 219 XT-PIC libata, ehci_hcd, VIA8233 9: 0 XT-PIC acpi 10: 9620 XT-PIC libata, SysKonnect SK-98xx, uhci_hcd, uhci_hcd 11: 30971 XT-PIC ohci1394, uhci_hcd, uhci_hcd, fcpci 12: 5304 XT-PIC i8042 14: 1569 XT-PIC ide0 NMI: 0 LOC: 0 ERR: 1 MIS: 0 linux:/home/ja # capiinfo Number of Controllers : 1 Controller 1: Manufacturer: AVM GmbH CAPI Version: 2.0 Manufacturer Version: 3.101-02 (49.18) Serial Number: 1000001 BChannels: 2 Global Options: 0x00000039 internal controller supported DTMF supported Supplementary Services supported channel allocation supported (leased lines) B1 protocols support: 0x4000011f 64 kbit/s with HDLC framing 64 kbit/s bit-transparent operation V.110 asynconous operation with start/stop byte framing V.110 synconous operation with HDLC framing T.30 modem for fax group 3 Modem asyncronous operation with start/stop byte framing B2 protocols support: 0x00000b1b ISO 7776 (X.75 SLP) Transparent LAPD with Q.921 for D channel X.25 (SAPI 16) T.30 for fax group 3 ISO 7776 (X.75 SLP) with V.42bis compression V.120 asyncronous mode V.120 bit-transparent mode B3 protocols support: 0x800000bf Transparent T.90NL, T.70NL, T.90 ISO 8208 (X.25 DTE-DTE) X.25 DCE T.30 for fax group 3 T.30 for fax group 3 with extensions Modem 0100 0200 39000000 1f010040 1b0b0000 bf000080 00000000 00000000 00000000 00000000 00000000 00000000 01000001 00020000 00000000 00000000 00000000 Supplementary services support: 0x000003ff Hold / Retrieve Terminal Portability ECT 3PTY Call Forwarding Call Deflection MCID CCBS linux:/home/ja # Wie schalte ich apic beim booten ein??? Wie kann ich im bios einen interrupt isolieren für fritz? Ami bios , ist alles auf Pnp eingestellt. Was kann mir ein Umstecken der Karte einbringen?? Danke für Deine Mühe bin erst morgen wieder an der Kiste schönen Abend und Feierabend Jörg
On Thu, Jan 20, 2005 at 02:00:16PM +0100, LogoAbel@web.de wrote:
Nachricht an Karsten Keil
hier capiinfo mit acpi:
ja@linux:~> su Password: linux:/home/ja # capiinfo Number of Controllers : 1
...
sieht OK aus.
mit pci=acpioff
pci=noacpi
nicht pci=acpioff
Interessanter ist /cat /proc/interrupts in beiden Faellen.
beim Versenden kommt dann folgende Fehlermeldung
Fax wird gesendet an: 420449 ()
Überspielung an Fax mit /usr/bin/capisuitefax -d '420449' '/tmp/kde-ja/kdeprint_0U1pJglF' Traceback (most recent call last): File "/usr/bin/capisuitefax", line 203, in ? cs_helpers.writeDescription(newname,"dialstring=\""+dialstring+"\"\n" File "/usr/lib/python2.3/site-packages/cs_helpers.py", line 283, in writeDescription
descr=open(filename[:filename.rindex('.')+1]+"txt","w") IOErro
[Errno 13] Permission denied: '/var/spool/capisuite/users/ja/sendq/fax-0.txt
Kann ich nichts zu sagen, das sieht sehr seltsam aus.
linux:/home/ja # cat /proc/interrupts CPU0 0: 4270728 XT-PIC timer 1: 589 XT-PIC i8042 2: 0 XT-PIC cascade 5: 197 XT-PIC libata, ehci_hcd, VIA8233 9: 0 XT-PIC acpi 10: 42229 XT-PIC libata, SysKonnect SK-98xx, uhci_hcd, uhci_hcd 11: 1064949 XT-PIC ohci1394, uhci_hcd, uhci_hcd, fcpci 12: 23024 XT-PIC i8042 14: 68229 XT-PIC ide0 NMI: 0 LOC: 0 ERR: 1 MIS: 0 linux:/home/ja #
bringt uns das weiter??
Ja, bei IRQ sharing mit fcpci gibt es immer wieder Probleme.
1. mal probieren ob es mit apic als bootoption besser wird (nicht acpi). auch hier ist cat /proc/interrupts interessant 2. Andere PCI Slots probieren oder im BIOS versuchen einen Interrupt fuer die Fritz PCI zu isolieren.
-- Karsten Keil SuSE Labs ISDN development