Hi, I've a problem with Ax25 under SuSE 7.3 It runs with Kernel 2.4-10. I've installed libax25, ax25apps and ax25tool. I made a copy of few conf files and the output messages of Ax25-up. Can u help me? Send a message at E-Mail address: cerrotta@libero.it TKS in advance. 73 de Jacob in Capri Island. Ax25-up when running .... linux:~ # cd /etc/ax25 linux:/etc/ax25 # ./ax25-up sethdlc: Version 0.5; (C) 1996-1997 by Thomas Sailer HB9JNX/AE 4WA driver name: baycom_ser_fdx current parameters: mode ser12* io 0x3f8 irq 4 ioctl (HDLCDRVCTL_SETMODE): Permission denied driver supported modes: ser12,ser3,ser24 sethdlc: Version 0.5; (C) 1996-1997 by Thomas Sailer HB9JNX/AE 4WA current parameters: TX delay 200ms, TX tail 20ms, slottime 30m s, p-persistence 128/256, Full duplex new parameters: TX delay 200ms, TX tail 20ms, slottime 30m s, p-persistence 128/256, Full duplex NET/ROM port netrom bound to device nr0 nrconfig: port netrom not active rsconfig: unable to open rsports file ax25d: invalid NET/ROM port 'netrom' ax25d: bad config entry on line 14 ax25d: bad config entry on line 15 ax25d: bad config entry on line 16 config file /etc/ax25/ax25rtd.conf not found linux:/etc/ax25 # ------------------------- # /etc/ax25/ax25d.conf # # ax25d Configuration File. # # AX.25 Ports begin with a '['. # # # Startbay0 [IC8FAX-2 via bay0 ] NOCALL * * * * * * L default * * * * * * - root /usr/sbin/axspawn axspawn %u # Endbay0 <netrom> parametres 1 10 * * * * * NOCALL * * * * * * L default * * * * * * - root /usr/sbin/node node ----------------------------------------------------------------------- /etc/ax25/ax25-up (script) #!/bin/bash # Version = ax25-config-0.3.2 # Startbay0 # Serielle Schnittstelle freigeben setserial /dev/ttyS0 uart none # Module einbinden modprobe ax25; modprobe baycom_ser_fdx; modprobe netrom # # Konfiguration des Modems: # Der Stern hinter "ser12" bedeutet, daß Software-DCD verwendet wird, # Ohne Stern wird Hardware-DCD erwartet. sethdlc -p -i bcsf0 mode "ser12*" io 0x3f8 # # Parameter einstellen: P=128, W=30, TX-Delay=200 sethdlc -i bcsf0 -a txd 200 txtail 20 slot 30 ppersist 128 full # # Modem im System anmelden und mit dem Rufzeichen verknüpfen /sbin/ifconfig bcsf0 hw ax25 IC8FAX-2 up nrattach netrom echo 100 > /proc/sys/net/ax25/bcsf0/t1_timeout echo 30 > /proc/sys/net/ax25/bcsf0/t2_timeout echo 3000 > /proc/sys/net/ax25/bcsf0/t3_timeout echo 20 > /proc/sys/net/ax25/bcsf0/maximum_retry_count echo 4 > /proc/sys/net/ax25/bcsf0/standard_window_size echo 256 > /proc/sys/net/ax25/bcsf0/maximum_packet_length # Port "bay0" als Netzwerkgerät "bcsf0" anmelden mit IP 192.168.1.1 /sbin/ifconfig bcsf0 192.168.1.1 netmask 255.255.255.0 \ broadcast 192.168.1.255 up # Endbay0 # StartARNM # # Logins von außen ermöglichen /usr/sbin/ax25d & echo $! > /var/run/ax25d.pid # # Start AX25 routing daemon /usr/sbin/ax25rtd & echo $! > /var/run/ax25rtd.pid # # Monitor auf Terminal 11 starten /usr/bin/listen -artc > /dev/tty11 & echo $! > /var/run/listen.pid # EndARNM --------------------------------------------------------- # /etc/ax25/axports # # The format of this file is: # # name callsign speed paclen window description # bay0 IC8FAX-2 1200 256 4 ser12-1200 Bd --------------------------------------------------------- /etc/ax25/ax25.config.bay0 (made by Mirko DG2FER) # # Don't add lines in this file, these will be lost next time you # Use the ax25-config utility. # Changes of existing lines will *not* being lost. Rufzeichen="IC8FAX-2" Modem="ser12" Ax25Device="bay0" NetDevice="bcsf0" KernelModules="ax25;baycom_ser_fdx" TxDelay="200" TxTail="20" Persistance="128" SlotTime="30" Paclen="256" MaxFrame="4" T1="100" T2="30" T3="3000" Retry="20" IpNr="192.168.1.1" Netmask="255.255.255.0" Broadcast="192.168.1.255" Port="/dev/ttyS0" SoftDcd="*" Baudrate="1200" IoBase="0x3f8" Irq="4" IntExt="" Clk="" Divider="" ChipClock="" Type="" ClockSource="" Mode="" StartAx25d="j" TcpIp="" Zugang="yes" GastName="no" BenutzerGruppe="users" BenutzerHome="/home" DMA="1" PTT="" PTT="" START_AX25RTD="" START_NETROM="" START_NODE="" NetRomCall="" NetRomAlias="" START_NETROMD="" Gateway="" GatewayAx25Path="" GatewayARP="44.130.25.80 db0ais-10" dns="" DataA="" DataB="" ctrlA="" ctrlB="" MIX="" Pipe="" kjd="" ---------------------------------------------------------- # /etc/ax25/nrports # # The format of this file is: # # name callsign alias paclen description # netrom IC8FAX-10 LINUX 235 Switch Port ----------------------------------------------------------- # /etc/ax25/nrbroadcast # # The format of this file is: # # ax25_name min_obs def_qual worst_qual verbose # bay0 5 192 100 0 -----------------------------------------------------------