Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&version=Tumbleweed&build=20180221 When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: GraphicsMagick cairo ceph (13.0.1.1987+g4a523803f8 -> 13.0.1.2078+g85df538001) evolution-data-server gjs graphite2 gstreamer-plugins-good harfbuzz (1.7.4 -> 1.7.5) hdf5 hp2xx (3.4.2 -> 3.4.4) libdatrie (0.2.9 -> 0.2.10) linphone lsof (4.89 -> 4.90) mjpegtools mutter (3.26.2+20180127.d32d358a6 -> 3.26.2+20180207.4b2d21ff0) obs-service-format_spec_file (20171107 -> 20180215) openvpn perl-IO-Socket-SSL (2.054 -> 2.056) php7 python-kiwi (9.12.9 -> 9.13.0) python-pytz (2017.3 -> 2018.3) python-typing (3.6.2 -> 3.6.4) spec-cleaner (1.0.2 -> 1.0.3) systemd thai-fonts vm-install (0.10.02 -> 0.10.03) wavpack xdotool (2.2012+git.20130201.65cb0b1 -> 3.20160805.1) xterm (330 -> 331) === Details === ==== GraphicsMagick ==== Subpackages: GraphicsMagick-devel libGraphicsMagick-Q16-3 libGraphicsMagick3-config libGraphicsMagickWand-Q16-2 - Add explicit buildrequires on: pkgconfig(libwebpmux), pkgconfig(libpng), pkgconfig(x11), pkgconfig(xext), pkgconfig(zlib), libjpeg-devel. all of them direct build dependencies but not included in the spec file ==== cairo ==== Subpackages: cairo-devel libcairo-gobject2 libcairo-script-interpreter2 libcairo2 libcairo2-32bit - Add explicit pkgconfig(zlib) and (conditionalized on build_xcb_backend) pkgconfig(xcb-render) BuildRequires: closer alignment with what configure checks for. ==== ceph ==== Version update (13.0.1.1987+g4a523803f8 -> 13.0.1.2078+g85df538001) Subpackages: librados2 librbd1 - Update to version 13.0.1-2078-g85df538001: + spec file: * revert "enable --without-python2 bcond for all distros" (as of Code 15, Python 2 bindings will not be built by default: projects wishing to build them will need to provide --with-python2 explicitly) (bsc#1081836) ==== evolution-data-server ==== Subpackages: evolution-data-server-lang libcamel-1_2-60 libebackend-1_2-10 libebook-1_2-19 libebook-contacts-1_2-2 libecal-1_2-19 libedata-book-1_2-25 libedata-cal-1_2-28 libedataserver-1_2-22 libedataserverui-1_2-1 - Update summaries - Drop redundant %if..%endif guards ==== gjs ==== Subpackages: libgjs0 typelib-1_0-GjsPrivate-1_0 - Do not try to build against s390 anymore, since it doesn't build with mozjs54 and s390 is only for compability with old applications (gjs doesn't qualifies). ==== graphite2 ==== Subpackages: graphite2-devel libgraphite2-3 libgraphite2-3-32bit - gcc8.patch: return correct value from stream operator ==== gstreamer-plugins-good ==== Subpackages: gstreamer-plugins-good-extra gstreamer-plugins-good-lang - Add gst-good-flacdec-flush-flac-decoder.patch: flacdec: flush flac decoder on lost sync (bgo#791473). - Add gst-good-fix-memory-leak-GAP-buffers.patch: interleave: Fix memory leak of GAP buffer (bgo#793067). ==== harfbuzz ==== Version update (1.7.4 -> 1.7.5) Subpackages: harfbuzz-devel libharfbuzz-icu0 libharfbuzz0 libharfbuzz0-32bit - Update to version 1.7.5: + Separate Khmer shaper from Indic. + First stab at AAT morx. Not hooked up. + Misc bug fixes. ==== hdf5 ==== Subpackages: libhdf5-101 libhdf5_hl100 - Trim description for size and drop most of the marketing blurb. Fix RPM groups. - Make module files package arch dependent: it contains arch-dependent paths (boo#1080442). - Prepend PKG_CONFIG_PATH in modules file (boo#1080426). - Add support for openmpi2 for HPC (FATE#325089). - Fix summary in module files (bnc#1080259) ==== hp2xx ==== Version update (3.4.2 -> 3.4.4) - Update to 3.4.4 * New features: - Added experimental support for scalable (truetype) fonts based on the freetype2 library. To enable this, obtain a suitable fixed-width font (such as Bitstream Vera Mono available from www.gnome.org/fonts) and add '-DSTROKED_FONTS=\"/path/to/this/truetype/font.ttf\"' in the DEFINES section of the Makefile) - DXF header improved, and line width and color support added - Added support for the rectangle mode within PE mode - Added NR as another end-of-image marker in multi-image files - hp2xx now tries to print the offending section of the input file when it encounters an error. - Added a new commandline option, -M <pen> to redirect pen 0 drawing commands to any other, ideally unused pen number. This works around the problem that redefining PC0 also changes the background color of raster images (but not vector files such as eps). * Bug fixes: - penwidth was erroneously set to the default 0.1 mm after drawing a label - xfig and rgip output did not yet handle the changed pencolor and width settings - polygons sometimes had the wrong sections filled in for some of the scanlines - forcing penwidth via the -p commandline option no longer worked for the conventional values between 1 and 9 - Simplified HPGL output could contain values in exponential notation (which is illegal in HPGL1) - Default miter limit in eps and pdf output was way too large - Using the -ansi compiler flag (as even suggested by the supplied Makefiles) could result in a broken binary (due to missing function prototypes) on some platforms - the size of the raster buffer was miscalculated in some circumstances - DT implementation was both incorrect and incomplete - AA with CT set to 'deviation distance' gave wrong results or even crashed the program - page counting of multi-image files was not always correct, rendering some images inaccessible, or causing the generation of blank image files) - SP in PE mode did not update the pen count, potentially resulting in color loss in the raster modes. - Using -h, -? or even -help for help no longer generates an error message before the help text is shown. - includes 3.4.3 * New features: - Raster graphics modes now use correctly scaled penwidths - Added support for (most of) the LA, line attributes command (cap/join types best supported in eps,fig and pdf for now) - Added support for the CR (relative color range) command - Added support for the IR (input reference points as percentage of current limits) command - Added support for the OW (output clipping window) command - hp2xx now recognizes (and ignores) the VS command to reduce number of runtime warnings - hp2xx now ignores stray Escape characters among HPGL commands - EMF export is now also available as an option on non-Windows builds if libEMF (http://libemf.sourceforge.net) is installed - hp2xx now translates FP commands into EP to show the outlines when the -n, --nofill option is used. (Previously polygon commands were ignored in that case unless they contained an explicit EP as well. This was particularly unfortunate in the case of polygon-derived text) - Added new commandline option -e, --extraclip <unit> for additional margin around clip regions. Some programs apparently miscalculate their frames. - Input files containing several plots are now rendered as separate images, even if the -P option is not used. Output file names are numbered starting from the second file, i.e. file.plt yields file.png file.1.png file.2.png. - TIFF creation on stdout now uses a safer method of generating and accessing its temporary file on Unix. - Added a new output format, G-code for CNC engraving * Bug fixes: - hp2xx now ignores SC commands with invalid parameters - hp2xx now ignores PS0 - IW without parameters now does not cause clipping when P1,P2 are still set to the 'hardware defaults'. - AC support in 3.4.2 slowed down the polygon fill code - raster mode was allocating a big 8 bit per pixel memory buffer even when the pen data would fit in 4bpp - PDF output would fold the image in some cases - The RO/IW fix in 3.4.2 broke other cases, fixed again. - The DXF header was a bit too minimalistic for some readers - Dots drawn for PUPDPU sequences were not clipped by IW - Unsupported subtypes 6 and 7 of SD and AD (weight & typeface) caused an error exit instead of simply being ignored - extremely short line segments could confuse the pattern state machine, resulting in no or extraneous lines being drawn - BP did not handle kind=5 (autorotation control). This could lead to misinterpretation of further arguments to BP, specifically title strings - Escape sequences inside PJL headers (two or more header lines starting with 'Esc-12345X') are now handled gracefully - Removed memory leak in the X11 previewers' zoom function - PDF output could omit lines in some cases - PM2 did not close the current polygon if necessary - Polygon fill range was not always initialized correctly - Compile fix for HPUX11 ansi compiler (add whitespace to work around what is probably a compiler bug) - Vertices of filled polygons were omitted from calculation of actual plot size - added ROWSPERSTRIP header parameter to TIFF files, as some programs rely on its presence - Dots for PUPDPU got drawn for PDPA as well, which made consecutive dashed lines restart the dash pattern for each segment instead of carrying over the remainder of the pattern from the previous one. - Removed the checks preventing negative or large offsets to be defined with the -o and -O commandline options - The viewbox given in the SVG header was too small - Closed several memory leaks (mainly important for multi-file operation). - The documentation was outdated in several aspects. - The SVG output used integral linewidths only roughly corresponding to the original values. - Files that explicitly asked for default arc precision (by providing a zero tolerance value) were not handled correctly - Text penwidth was always the same as that in use for linedrawing. This is now fixed, and the SD option for forcing this behaviour is now honored. - Some warning messages were emitted even in quiet mode. - rebase hp2xx-3.4.2-fix.patch - rebase hp2xx-3.4.2-png-deprecated.patch - drop hp2xx-3.4.2-implicit-decls.patch (fixed upstream) - add fix-stringcompare.patch (fixes rpm lint error) ==== libdatrie ==== Version update (0.2.9 -> 0.2.10) Subpackages: libdatrie1 libdatrie1-32bit - Fix RPM groups. Remove ineffective --with-pic. - update to version 0.2.10 * Correctly check doxygen version on configure * Optimization on AlphaMap mapping - remove libdatrie-doxygen-version-check.patch * upstreamed in 7db54c662357dba5f109eaf1b24490f46ca23d44 - use https urls ==== linphone ==== Subpackages: liblinphone++9 liblinphone-data liblinphone-devel liblinphone-lang liblinphone9 - Revert back to Python2: building with Python3 has regressions (boo#1077857). ==== lsof ==== Version update (4.89 -> 4.90) - Update to version 4.90 [bsc#1081562] * Taught the Configure script to create a dummy opt_random.h for FreeBSD systems whose <sys/random.h> includes it. * Added support for the FreeBSD ZFUSE file system. * Corrected the quoting in a Darwin putchar() statement in the dfile.c source file. * Added support for the FreeBSD DTYPE_PTS file descriptor and for unknown descriptors that reference the kernel's badfileops operation switch. Enabled FreeBSD 12.0 support. * Enhanced -K option with the form "-K i" to direct lsof to (i)gnore tasks. Linux task reports now include both process and task command names, making lsof's "-c <name>" option work correctly. * Added a patch to prevent NFS blocking in Linux * Installed a FreeBSD patch that prevents examining a TCP state structure during a race condition. * Updated FreeBSD for new UFS inode structure that lacks an i_dev member in the most recent 12.0-CURRENT. * Added "#define KLD_MODULE" to dlsof.h and dnode2.c to prevent <machine/cpuconf.h> from generating an "ARM_NARCH is 0" error. This is needed so lsof can access kernel structures. * Added recognition of the FreeBSD 11 file system name "nullfs". * Added a patch that is needed on FreeBSD 12 so the lsof compilation can obtain the inpcb and tcpcb structures from their respective header files. Updated FreeBSD dmnt.c for the ino64 changes. * Inserted a patch for Solaris 12.x to avoid compilation errors from <sys/aio_req.h>. * Added performance enhancement that uses the FreeBSD closefrom() and dup2() C library functions when available. * Corrected FreeBSD lsof's gathering of ZFS file device numbers. * Updated lsof test library for FreeBSD. * Updated socket optons information collection from the socket structure * Added patch to dlsof.h that avoids a _KERNEL conflict with bzero. * Corrected test library to handle 64 bit FreeBSD device numbers. * Added #defines for FreeBSD 12, src r324225 * Incorporated Linux pseudoterminal endpoint processing (+|-E) * Corrected Linux command extraction for commands that include parentheses -- e.g., "(sd-pam)". - remove lsof_4.89-nfs_hanging.patch that was applied upstream ==== mjpegtools ==== Subpackages: libmjpegutils-2_0-0 - Make source tarball generation reproducible (boo#1041090) ==== mutter ==== Version update (3.26.2+20180127.d32d358a6 -> 3.26.2+20180207.4b2d21ff0) Subpackages: libmutter-1-0 mutter-data mutter-lang - Update to version 3.26.2+20180207.4b2d21ff0: + renderer/x11: Enable GPU memory purge error extension if available (bgo#739178). + cogl/x11/renderer: Silence introspection warning (bgo#739178). + backends/x11: Preserve XI1 XDevice throughout ClutterInputDevice lifetime (glgo#mutter#7). ==== obs-service-format_spec_file ==== Version update (20171107 -> 20180215) - Update to version 20180215: + map GPL-1.0 to GPL-1.0-only - Update to version 20180214: + adapt license list for SPDX 3.0 + remove readd-exceptions.patch ==== openvpn ==== - Add --askpass to ExecStart, so that the user name and password are correctly being queried from the user. (bsc#1078026, boo#985798, boo#1031748) - Use %service_add/del macros throughout (bsc#1038406). ==== perl-IO-Socket-SSL ==== Version update (2.054 -> 2.056) - updated to 2.056 see /usr/share/doc/packages/perl-IO-Socket-SSL/Changes 2.056 2018/02/19 - Intercept - fix creation of serial number: base it on binary digest instead of treating hex fingerprint as binary. Allow use of own serial numbers again. - t/io-socket-ip.t - skip test if no IPv6 support on system RT#124464 - update PublicSuffix - updated to 2.055 see /usr/share/doc/packages/perl-IO-Socket-SSL/Changes 2.055 2018/02/15 - use SNI also if hostname was given all-uppercase - Utils::CERT_create - don't add authority key for issuer since Chrome does not like this - Intercept: - change behavior of code based cache to better support synchronizing within multiprocess/threaded setups - don't use counter for serial number but somehow base it on original certificate in order to avoid conflicts with reuse of serial numbers after restart - RT#124431 - better support platforms w/o IPv6 - RT#124306 - spelling fixes in documentation ==== php7 ==== Subpackages: apache2-mod_php7 php7-bcmath php7-bz2 php7-calendar php7-ctype php7-curl php7-dba php7-devel php7-dom php7-exif php7-fastcgi php7-ftp php7-gd php7-gettext php7-gmp php7-iconv php7-imap php7-json php7-ldap php7-mbstring php7-mysql php7-odbc php7-openssl php7-pdo php7-pear php7-pear-Archive_Tar php7-pgsql php7-shmop php7-snmp php7-sockets php7-sqlite php7-sysvsem php7-sysvshm php7-tidy php7-tokenizer php7-wddx php7-xmlreader php7-xmlwriter php7-xsl php7-zip php7-zlib - Remove buildRequires on: * libevent-devel: php7-fpm does not use it. * pam-devel: not used - Add buildrequire on zlib-devel explicitly. - libvpx is not needed but libwebp is, only when not building against system gd. xft likewise. - fixed memory leak in pgsql extension, php function pg_escape_bytea https://bugs.php.net/bug.php?id=75838 [bsc#1076970] (internal) + php7-pgsql-memory-leak.patch ==== python-kiwi ==== Version update (9.12.9 -> 9.13.0) - Bump version: 9.12.9 ? 9.13.0 - Fixup grub2 theme setup The presence of a background file was mandatory for kiwi to use the theme. But the background information is optional - Deleted obsolete boot descriptions The custom kiwi boot descriptions has been moved into the kiwi-descriptions github repo and builds the compat package kiwi-boot-descriptions from there. The build of the boot image(initrd) is done by dracut and the dracut module packages provided by kiwi. The classic custom boot descriptions can still be used as alternative method if the above package is installed. Related to Issue #576 - Create compatible boot options The boot option root=install:CDLABEL= is mandatory for install images which uses the dracut initrd system. But for the custom kiwi oemboot descriptions this is causing a problem when detecting the install device. Thus the above boot option is only applied for the initrd system which actually makes use of it - Update boot description search path With the move of the boot descriptions in its own package the kiwi search path needs to be adapted to look for boot descriptions in /usr/share/kiwi/custom_boot. In addition a runtime check to exit early if the boot description could not be found or is not specified will be provided. Related to Issue #576 - Update the docs to the current example present in kiwi-descriptions ==== python-pytz ==== Version update (2017.3 -> 2018.3) - specfile: * update copyright year * move from zip to tar.gz * updated line number in patches and fixed whitespace issues: o 0001-Fix-tests-for-older-timezone-versions.patch o fix-tests.patch o system-zoneinfo.patch - update to version 2018.3: * Test updates for Iana 2018c changes * delint * lint target & update iana build rule * Bump version numbers to 2018.3/2018c * Include license file in the generated wheel package * Update travis config ==== python-typing ==== Version update (3.6.2 -> 3.6.4) - specfile: * update copyright year - update to version 3.6.4: * no changelog available ==== spec-cleaner ==== Version update (1.0.2 -> 1.0.3) - Drop the debian control things, all releases fail to build - Update to 1.0.3: * Fix various lint issues * Switch to SPDX-3.0 license format * Add %doc -> %license conversion script * Fix crash bugs found when scanning whole Tumbleweed repo ==== systemd ==== Subpackages: libsystemd0 libsystemd0-32bit libudev-devel libudev1 libudev1-32bit systemd-32bit systemd-bash-completion systemd-logger systemd-sysvinit udev - Import commit 295ead0f396beb2b5199abd99a17e274c2581f95 f4f94ab2e meson: install rules/80-hotplug-cpu-mem.rules 2901aa9b9 meson: install rules/60-ssd-scheduler.rules 1293c0056 core: use id unit when retrieving unit file state (#8038) (bsc#1075801) 596b2b241 Revert "vconsole-setup: add SUSE specific settings for font/keyboard in sysconfig" 0b595da04 Revert "locale-setup: handle locale at boot time well" - Re-enable systemd-firstboot It's used by the installer and also by JeOS. - Use %systemd_post in %post - Own /usr/lib/systemd/system-environment-generators directory - More systemd rpm macro usages - Disable systemd-firstboot I don't think there's any use case for it currently. - Use systemd rpm macros in paths defined in the specfile - Stop importing i18n settings from /etc/sysconfig (fate#319454) Bits taken from SLE15. - Make systemd-timesyncd use the openSUSE NTP servers by default Previously systemd-timesyncd used the Google Public NTP servers time{1..4}.google.com ==== thai-fonts ==== - make the license SPDX compliant ==== vm-install ==== Version update (0.10.02 -> 0.10.03) - fate#324167: vm-install: remove deps on udhcp - Version 0.10.03 ==== wavpack ==== - Added CVE-2018-7253.patch: Fixed a heap based buffer overread in cli/dsdiff.c, which allowed remote attackers to cause DoS via a specially crafted input file (CVE-2018-7253, bsc#1081692) - Added CVE-2018-7254.patch: Fixed a buffer overread in cli/caff.c, which allowed remote attackers to cause DoS via a specially crafted input file (CVE-2018-7254, bsc#1081693) - Security fix [bsc#1079746, CVE-2018-6767] * Crafted wav file can trigger a stack buffer overflow when parsing the file * Added wavpack-CVE-2018-6767.patch ==== xdotool ==== Version update (2.2012+git.20130201.65cb0b1 -> 3.20160805.1) - update to 3.20160805.1 * Fix release tool problem. cflags.sh was missing from the previous two releases. * `make test-package-build` now works correctly on Fedora and OSX - includes 3.20160804.2 * Fix some bugs in the Makefile - includes 3.20160804.1 * Fix memory leaks in window search and charcode map lookups * xdotool selectwindow (xdo_select_window_with_click) now only selects the window if mouse button 1 is pressed. Any other buttons will cause this selection to be aborted. * Fix bug where `xdotool click` with --clearmodifiers can sometimes leave stuck keys or mouse buttons. * windowmove now supports coordinates as a percentage of screen size. For example, a move to 50% 50% would move the window such that the top-left corner of the window is in the center of the screen. * Typing commands (key and type) will now try to use XTEST instead of XSendEvent in a special circumstance. If the window id given (by window stack or the --window flag) is the currenly focused window, key sequences will be sent using XTEST. * getmouselocation, getwindowgeometry, and search commands: now supports --shell and --prefix for having stdout be consumable by bash or similar shells. * xdotool scripts such as running via `xdotool -` will now execute commands as lines of input are read. The previous behavior waited until stdin closed before executing anything. - includes 3.20150503 () * Fix sending wrong keys when using multiple keyboard layouts * Add --repeat and --repeat-delay to allow repetition of a key sequence * Fix handling of empty files in type command * consume regexp argument only if present. * update URLs to Github * Changes determined via: https://github.com/jordansissel/xdotool/compare/65cb0b1...v3.20150503.1 with an optional delay in between each full sequence. - drop _service file in favor of github release tarball - use https for site - cleanup with spec-cleaner - add remove-dead-function.patch * removes reference to function in header file that was removed ==== xterm ==== Version update (330 -> 331) Subpackages: xterm-bin - Patch #331 - 2017/12/30 * add workaround for improper grayscale adjustments made in FreeType library, exposed by changes to rounding in 2.8.1, which shows up as a gap in line-drawing characters * improve a special case where a non-Unicode font's line-drawing characters were not used, when specifying it via the utf8Fonts resource. * replace constant 10msec delay for next X event with new resource nextEventDelay, and reduce that to 1msec to accommodate faster machines than used when -hold was implemented in 1999 * add scroll-to action, which simplifies binding a key to scroll to the beginning or end of the saved-lines * add building blocks for alternate screen and/or title-stack features in the terminfo file. * improve calculations for cell-data size. * configure script: enable XHTML/SVG screen dumps by default. * configure script: enable 256-colors by default. * update config.guess, config.sub * configure script: option for --with-man2html to use improved script by default. * add case for private mode 1044 in DECRQM, to report the keepClipboard resource setting and corresponding menu entry. * fix an inconsistency between private mode 12 (the AT&T 610 cursor blink) and DECSCUSR: the former relied on having the cursorBlink resource set initially to enable the escape sequence, while the latter does not. * add private modes 13 and 14, as well as resource cursorBlinkXOR to allow better control over the cursor-blinking state * modify the html and svg screen dumps to support direct color * modify media copy (screen-printing) to support the same SGR codes as DECRQSS, including 88/256 indexed color as well as direct color. * improve options-parsing for query-status.pl script. * modify parsing of SGR direct-color control making color space identitier optional. The corresponding DECRQSS reply always returns an empty (default) field for the identifier. * add wide-attributes to DECRQSS reply for SGR. * add private mode 1046 to help with scripting applications. * correct expression used for readline-flags in DECRQM; to test the current flag rather than information stacked within the same variable. * correct typo in ctlseqs.ms reference to ISO-8613-6 * fix lintian warning for test-package. * fix typo in DECRQSS for SGR 48, which printed the foreground value for colors past 15. Also use colon delimiter for codes 38/48 in response * improve workaround for Debian #542434 by using the font's maximum width when no ISO-8859-1 glyphs are provided * work around a special case of Xft's mismanagement of its cached data by adding a check before the -report-fonts option to ensure that it does not use an XftPattern which may have been freed during a call to XftFontOpenPattern. * improve manual page description of regex option for onXClicks resources * add directColor resource. * additional manpage macro cleanup * add optional support for direct-colors * improve legacy/NRC character set mapping: + enable alternate NRC set designators for French and French Canadian, ?9? and ?f? respectively, as documented in ctlseqs. (?9? is documented for VT510, ?f? is a Kermit feature). + correct the Unicode value in the DEC Technical table to show capital delta. + referring to * http://vt100.net/docs/vt220-rm/table2-3b.html * http://vt100.net/docs/vt320-uu/appendixe.html + add entries for the DEC Supplemental Graphics table to display 0x28/0xa8 as � and 0x5d/0xdd as ?. referring to * http://www.vt100.net/charsets/technical.html * alter the Unicode values used for 0x2b through 0x2c to use curly braces to work with the ?middle? parts displayed with 0x2f and 0x30. + modify the VT220 ?Supplemental? table, giving a hint that it was probably meant to be ?Supplemental Graphics? and is the same as VT320's table. * quiet a few font-warnings when a derived fontname cannot be opened, overlooked in refactoring of font resources in patch #328 * correct error response for DECRQSS broken in cleanup of Coverity reports in patch #288 * improve DECRPM responses by returning mode not recognized for modes which may not be settable due to the selected decTerminalID resource * correct logic for print-immediate action, and enable corresponding menu entry * add configure option --with-pcre2 * fix a misspelled subsection title in ctlseqs.ms and add a note regarding blink which was rendered as bold in X11R6. Blinking text was implemented in Patch #60. * fix typos in xterm.man * fix typography in xterm.man * fix typo in INSTALL * add xterm-direct terminal description based on changes introduced in patch #277, and relying upon ncurses RGB extension. * modify xterm-new terminal description to use ECMA-48 REP, reflecting its use in xterm since patch #32 (1996). * clarify comment in ctlseqs.ms regarding blink: it has been part of xterm since patch #60 (1998). * update ftp URLs in documentation. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org