X does not start anymore after today's update
Hi, when I started my Tumbleweed this morning it still started lightdm fine. I did some maintenance tasks including a zypper dup. (The other things were just copying data in my home from another disk but this really shouldn't break X.) After the next reboot X/lightdm did not start anymore. I read /var/log/Xorg.0.log carefully multiple times now but do not find any error there. It does a lot of things and late includes all the different input drivers. After the last and 0.5 seconds later it starts to tell me that it removed devices again, undloads libinput and finally says (II) Server terminated successfully (0). Closing log file. So I'm a bit lost. The logs looks like a graceful X shutdown but for sure did not do that myself. From a quick look I see only a few packages which might be relevant and have been updated: xorg-x11-Xvnc kernel-default dmesg shows [ 20.012692] [drm] Unknown EDID CEA parser results [ 20.026952] [drm] Unknown EDID CEA parser results I cannot tell if I had those before. And because I was in the middle of setting up this new system I cannot/do not want to use snapper to go back completely to an intermediate state. Graphics device is Model: "ATI Cezanne" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x1638 "Cezanne" Driver: "amdgpu" Driver Modules: "amdgpu" Any ideas or other people having similar issues? Thanks, Wolfgang
On 20.11.2021 17:51, Wolfgang Rosenauer wrote:
Hi,
when I started my Tumbleweed this morning it still started lightdm fine.
I did some maintenance tasks including a zypper dup. (The other things were just copying data in my home from another disk but this really shouldn't break X.)
After the next reboot X/lightdm did not start anymore.
I read /var/log/Xorg.0.log carefully multiple times now but do not find any error there. It does a lot of things and late includes all the different input drivers. After the last and 0.5 seconds later it starts to tell me that it removed devices again, undloads libinput and finally says
(II) Server terminated successfully (0). Closing log file.
So I'm a bit lost. The logs looks like a graceful X shutdown but for sure did not do that myself.
From a quick look I see only a few packages which might be relevant and have been updated: xorg-x11-Xvnc kernel-default
dmesg shows [ 20.012692] [drm] Unknown EDID CEA parser results [ 20.026952] [drm] Unknown EDID CEA parser results
I cannot tell if I had those before.
And because I was in the middle of setting up this new system I cannot/do not want to use snapper to go back completely to an intermediate state.
Graphics device is Model: "ATI Cezanne" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x1638 "Cezanne" Driver: "amdgpu" Driver Modules: "amdgpu"
Any ideas or other people having similar issues?
Full output of "journalctl -b" and full Xorg.log may give some hints.
Am 20.11.21 um 16:24 schrieb Andrei Borzenkov:
Full output of "journalctl -b" and full Xorg.log may give some hints.
Xorg.log I didn't find anything useful. Checking journalctl -b ... and finally it surely was my stupidity :-( I added some users manually when migrating from my old to the new system and finally lightdm's var folder where owned by another user. Sorry for the noise. Wolfgang
El sáb, 20 nov 2021 a las 14:06, Wolfgang Rosenauer (<wolfgang@rosenauer.org>) escribió:
Am 20.11.21 um 16:24 schrieb Andrei Borzenkov:
Full output of "journalctl -b" and full Xorg.log may give some hints.
Xorg.log I didn't find anything useful. Checking journalctl -b ...
and finally it surely was my stupidity :-(
I added some users manually when migrating from my old to the new system and finally lightdm's var folder where owned by another user.
Sorry for the noise.
Today I experienced a black screen at the end of the Tumbleweed update, bay later appeared the Plasma screen. In dmesg I find (with Radeon RX-580): [ 0.839352] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 0.839354] vesafb: scrolling: redraw [ 0.839355] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 0.839368] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 8128k, total 8128k [ 0.839456] Console: switching to colour frame buffer device 240x67 [ 0.858557] fb0: VESA VGA frame buffer device [ 3.494774] [drm] amdgpu kernel modesetting enabled. [ 3.494858] amdgpu: CRAT table not found [ 3.494861] amdgpu: Virtual CRAT table created for CPU [ 3.494875] amdgpu: Topology: Add CPU node [ 3.498234] fb0: switching to amdgpu from VESA VGA [ 3.498343] Console: switching to colour dummy device 80x25 [ 3.498363] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 3.498480] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1DA2:0xE366 0xE7). [ 3.498486] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 3.498496] [drm] register mmio base: 0xF7FC0000 [ 3.498498] [drm] register mmio size: 262144 [ 3.498500] [drm] PCIE atomic ops is not supported [ 3.498505] [drm] add ip block number 0 <vi_common> [ 3.498507] [drm] add ip block number 1 <gmc_v8_0> [ 3.498508] [drm] add ip block number 2 <tonga_ih> [ 3.498509] [drm] add ip block number 3 <gfx_v8_0> [ 3.498511] [drm] add ip block number 4 <sdma_v3_0> [ 3.498512] [drm] add ip block number 5 <powerplay> [ 3.498513] [drm] add ip block number 6 <dm> [ 3.498515] [drm] add ip block number 7 <uvd_v6_0> [ 3.498516] [drm] add ip block number 8 <vce_v3_0> [ 3.498693] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window] [ 3.498698] caller pci_map_rom+0x79/0x1d0 mapping multiple BARs [ 3.498705] amdgpu 0000:01:00.0: No more image in the PCI ROM [ 3.499904] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 3.499907] amdgpu: ATOM BIOS: 113-1E3660EU-O55 [ 3.499926] [drm] UVD is enabled in VM mode [ 3.499927] [drm] UVD ENC is enabled in VM mode [ 3.499929] [drm] VCE enabled in VM mode [ 3.499959] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 3.501394] amdgpu 0000:01:00.0: amdgpu: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used) [ 3.501398] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 3.501405] [drm] Detected VRAM RAM=4096M, BAR=256M [ 3.501407] [drm] RAM width 256bits GDDR5 [ 3.501442] [drm] amdgpu: 4096M of VRAM memory ready [ 3.501444] [drm] amdgpu: 4096M of GTT memory ready. [ 3.501449] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 3.501812] [drm] PCIE GART of 256M enabled (table at 0x000000F4007E9000). [ 3.504038] [drm] Chained IB support enabled! [ 3.513726] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 3.533917] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 3.542619] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 3.607125] [drm] Display Core initialized with v3.2.149! [ 3.640592] BTRFS: device fsid 7fec0258-6ebe-4b0f-a0ff-831cc0ea0c23 devid 1 transid 125181 /dev/sda1 scanned by systemd-udevd (380) [ 3.690724] [drm] UVD and UVD ENC initialized successfully. [ 3.714116] usb 5-2: new low-speed USB device number 2 using ohci-pci [ 3.800671] [drm] VCE initialized successfully. [ 3.800676] kfd kfd: amdgpu: skipped device 1002:67df, PCI rejects atomics 730<0 [ 3.800697] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 36 [ 3.803219] [drm] fb mappable at 0xD0D19000 [ 3.803222] [drm] vram apper at 0xD0000000 [ 3.803223] [drm] size 8294400 [ 3.803224] [drm] fb depth is 24 [ 3.803224] [drm] pitch is 7680 [ 3.803282] fbcon: amdgpu (fb0) is primary device [ 3.889108] Console: switching to colour frame buffer device 240x67 [ 3.908418] amdgpu 0000:01:00.0: [drm] fb0: amdgpu frame buffer device [ 3.910254] usb 5-2: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.10 [ 3.910258] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.910261] usb 5-2: Product: USB Keyboard [ 3.910263] usb 5-2: Manufacturer: SIGMACHIP [ 3.928367] usbcore: registered new interface driver usbhid [ 3.928370] usbhid: USB HID core driver [ 3.930579] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.0/0003:1C4F:0002.0001/input/input3 [ 3.934858] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 3.935340] [drm] Initialized amdgpu 3.42.0 20150101 for 0000:01:00.0 on minor 0 Regards, Juan -- USA LINUX OPENSUSE QUE ES SOFTWARE LIBRE, NO NECESITAS PIRATEAR NADA Y NI TE VAS A PREOCUPAR MAS POR LOS VIRUS Y SPYWARES: http://www.opensuse.org/es/ Puedes visitar mi blog en: http://jerbes.blogspot.com.ar/
В письме от суббота, 20 ноября 2021 г. 17:51:15 MSK пользователь Wolfgang Rosenauer писал:
I did some maintenance tasks including a zypper dup. (The other things were just copying data in my home from another disk but this really shouldn't break X.)
After the next reboot X/lightdm did not start anymore.
Graphics device is Model: "ATI Cezanne" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x1638 "Cezanne" Driver: "amdgpu" Driver Modules: "amdgpu"
Any ideas or other people having similar issues?
I recently ran into a similar problem. After removing the xf86-video-ati package (see [1]), the X Server is now started without any problem. 1. https://bugzilla.opensuse.org/show_bug.cgi?id=1160807#c3
Am 20.11.21 um 17:19 schrieb Andrey Karepin:
В письме от суббота, 20 ноября 2021 г. 17:51:15 MSK пользователь Wolfgang Rosenauer писал:
I did some maintenance tasks including a zypper dup. (The other things were just copying data in my home from another disk but this really shouldn't break X.)
After the next reboot X/lightdm did not start anymore.
Graphics device is Model: "ATI Cezanne" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x1638 "Cezanne" Driver: "amdgpu" Driver Modules: "amdgpu"
Any ideas or other people having similar issues?
I recently ran into a similar problem. After removing the xf86-video-ati package (see [1]), the X Server is now started without any problem.
that didn't help unfortunately. Wolfgang
participants (4)
-
Andrei Borzenkov -
Andrey Karepin -
Juan Erbes -
Wolfgang Rosenauer