[opensuse-factory] "No human readable MCE decoding support on this CPU"
Hi! Afterupdating to 11.4 I noticed regular beeps from the speaker especially after computer is switched on. Now I found the cause: the kernel reports "No human readable MCE decoding support on this CPU". How can I combat it? I have Intel Core2 Duo. I woder if this will affect the next openSUSE release as well. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Monday 10 October 2011 10:58:19 Ilya Chernykh wrote:
Afterupdating to 11.4 I noticed regular beeps from the speaker especially after computer is switched on. Now I found the cause: the kernel reports "No human readable MCE decoding support on this CPU". How can I combat it? I have Intel Core2 Duo.
I woder if this will affect the next openSUSE release as well.
And it seems the error is as follows: mcelog: failed to prefill DIMM database from DMI data -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Monday 10 October 2011 11:15:07 Ilya Chernykh wrote:
failed to prefill DIMM database from DMI data
And also I get the following when running mcelog manually: HARDWARE ERROR. This is *NOT* a software problem! Please contact your hardware vendor MCE 0 CPU 0 BANK 3 TIME 1318231229 Mon Oct 10 11:20:29 2011 MCG status: MCi status: Error enabled Threshold based error status: green MCA: corrected filtering (some unreported errors in same region) Level-2 Generic memory hierarchy error STATUS 902000040120100e MCGSTATUS 0 MCGCAP 806 APICID 0 SOCKETID 0 CPUID Vendor Intel Family 6 Model 15 HARDWARE ERROR. This is *NOT* a software problem! Please contact your hardware vendor MCE 1 CPU 1 BANK 3 ADDR 7a18e758 TIME 1318231229 Mon Oct 10 11:20:29 2011 MCG status: MCi status: Error enabled MCi_ADDR register valid Threshold based error status: green MCA: Generic CACHE Level-2 Generic Error STATUS 942000440101010a MCGSTATUS 0 MCGCAP 806 APICID 1 SOCKETID 0 CPUID Vendor Intel Family 6 Model 15 HARDWARE ERROR. This is *NOT* a software problem! Please contact your hardware vendor MCE 0 CPU 0 BANK 3 TIME 1318231461 Mon Oct 10 11:24:21 2011 MCG status: MCi status: Error enabled Threshold based error status: green MCA: corrected filtering (some unreported errors in same region) Level-2 Generic memory hierarchy error STATUS 902000040220100e MCGSTATUS 0 MCGCAP 806 APICID 0 SOCKETID 0 CPUID Vendor Intel Family 6 Model 15 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Mon, Oct 10, 2011 at 11:26:37AM +0400, Ilya Chernykh wrote:
On Monday 10 October 2011 11:15:07 Ilya Chernykh wrote:
failed to prefill DIMM database from DMI data
And also I get the following when running mcelog manually:
HARDWARE ERROR. This is *NOT* a software problem! Please contact your hardware vendor
Did you do that? If not, why not? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
failed to prefill DIMM database from DMI data
And also I get the following when running mcelog manually:
HARDWARE ERROR. This is *NOT* a software problem! Please contact your hardware vendor
Did you do that? If not, why not?
You mean Intel? :-) Under 11.3 all was OK. I just applied "nomce" option to kernel, so got rid me of those annoying beeps. For all those months after the 11.4 release I just wondered why are those beeps. I suspected keyboard buffer overflow, network events, memory shortage and anything else. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Mon, Oct 10, 2011 at 09:30:49PM +0400, Ilya Chernykh wrote:
failed to prefill DIMM database from DMI data
And also I get the following when running mcelog manually:
HARDWARE ERROR. This is *NOT* a software problem! Please contact your hardware vendor
Did you do that? If not, why not?
You mean Intel? :-)
If they made your motherboard, yes. greg k-h -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Monday 10 October 2011 21:38:25 Greg KH wrote:
failed to prefill DIMM database from DMI data
And also I get the following when running mcelog manually:
HARDWARE ERROR. This is *NOT* a software problem! Please contact your hardware vendor
Did you do that? If not, why not?
You mean Intel? :-)
If they made your motherboard, yes.
Then possibly, Asus. But the warranty is already over long ago. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Mon, Oct 10, 2011 at 7:49 PM, Ilya Chernykh
Then possibly, Asus. But the warranty is already over long ago.
Run memtest first -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 10/10/2011 09:22 PM, Claudio Freire wrote:
On Mon, Oct 10, 2011 at 7:49 PM, Ilya Chernykh
wrote: Then possibly, Asus. But the warranty is already over long ago.
Run memtest first goto Yast2 System Runlevel and turn it off that will stop it from look for it. or goto your /et/init.d/rc(runlevel).d/ and remove K## and S## mcelog. For some reason it is the default
-- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb@comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb@arrl.net " VoIP via Skype:n5xwbg BMWMOA #:4146 Ambassador " http://counter.li.org " #279316 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Tuesday 11 October 2011 16:28:03 Donn Washburn wrote:
Then possibly, Asus. But the warranty is already over long ago.
Run memtest first goto Yast2 System Runlevel and turn it off that will stop it from look for it. or goto your /et/init.d/rc(runlevel).d/ and remove K## and S## mcelog. For some reason it is the default
Sorry I did not understnd what you are talking about. What is "Yast2 system runlevel", what should I turn off, for what it should stop look and what is K## and S##? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Tuesday 11 October 2011 16:28:03 Donn Washburn wrote:
Then possibly, Asus. But the warranty is already over long ago.
Run memtest first goto Yast2 System Runlevel and turn it off that will stop it from look for it. or goto your /et/init.d/rc(runlevel).d/ and remove K## and S## mcelog. For some reason it is the default
Sorry I did not understnd what you are talking about. What is "Yast2 system runlevel", what should I turn off, for what it should stop look and what is K## and S##?
For what you want to do, it's not really required to understand the init runlevel subsystem (although that is good to know, though). All you need to do is run "YaST System Services (Runlevel)" from the YaST menu under the System section. It presents a list of the system startup/stop scripts, and allows you to enable or disable running any. Just highlight the mcelog line and then hit the Disable button below and then hit OK; MCE will not start any longer. Note: This module is for "experts". While it is OK to disable the mcelog service, it is important not to disable a service unless you are absolutely sure what you are doing. Disabling some services can sometimes prevent proper startup in a given runlevel. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Tuesday 11 October 2011 19:16:45 dwgallien wrote:
For what you want to do, it's not really required to understand the init runlevel subsystem (although that is good to know, though). All you need to do is run "YaST System Services (Runlevel)" from the YaST menu under the System section. It presents a list of the system startup/stop scripts, and allows you to enable or disable running any. Just highlight the mcelog line and then hit the Disable button below and then hit OK; MCE will not start any longer.
I already uninstalled the mcelog package to get rid of the beeps. How can I disable it if I uninstalled it? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
* Ilya Chernykh
On Tuesday 11 October 2011 19:16:45 dwgallien wrote:
For what you want to do, it's not really required to understand the init runlevel subsystem (although that is good to know, though). All you need to do is run "YaST System Services (Runlevel)" from the YaST menu under the System section. It presents a list of the system startup/stop scripts, and allows you to enable or disable running any. Just highlight the mcelog line and then hit the Disable button below and then hit OK; MCE will not start any longer.
I already uninstalled the mcelog package to get rid of the beeps. How can I disable it if I uninstalled it?
If you "uninstalled" it, *why* would you need to disable it? Just curious. -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Tuesday 11 October 2011 19:16:45 dwgallien wrote:
For what you want to do, it's not really required to understand the init runlevel subsystem (although that is good to know, though). All you need to do is run "YaST System Services (Runlevel)" from the YaST menu under the System section. It presents a list of the system startup/stop scripts, and allows you to enable or disable running any. Just highlight the mcelog line and then hit the Disable button below and then hit OK; MCE will not start any longer.
I already uninstalled the mcelog package to get rid of the beeps. How can I disable it if I uninstalled it?
Huh??? Of course if it is not installed, it isn't there to disable. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 2011-10-10 19:30, Ilya Chernykh wrote:
Under 11.3 all was OK.
Try 11.3 again, if you have space for another partition. And factory. - -- Cheers / Saludos, Carlos E. R. (from 11.4 x86_64 "Celadon" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAk6UC0gACgkQtTMYHG2NR9U/BACdEteeuV5ogLhNQSS1+No58kiV cLkAnjvhDHZZDzm8tuHa83tQk9TWBwQP =OdpS -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Ilya Chernykh wrote:
Hi!
Afterupdating to 11.4 I noticed regular beeps from the speaker especially after computer is switched on. Now I found the cause: the kernel reports "No human readable MCE decoding support on this CPU". How can I combat it? I have Intel Core2 Duo.
I woder if this will affect the next openSUSE release as well.
Have you tried toggling mcelog off(or on) in Yast->System Services(Runlevel)? You can stop/start the service here manually as well as controlling what it does at boot. -Mike -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
participants (8)
-
Carlos E. R.
-
Claudio Freire
-
Donn Washburn
-
dwgallien
-
Greg KH
-
Ilya Chernykh
-
Michael Powell
-
Patrick Shanahan