Please note that this mail was generated by a script.
The described changes are computed based on the x86_64 DVD.
The full online repo contains too many changes to be listed here.
Please check the known defects of this snapshot before upgrading:
https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&version=Tumbleweed&build=20230125
Please do not reply to this email to report issues, rather file a bug
on bugzilla.opensuse.org. For more information on filing bugs please
see https://en.opensuse.org/openSUSE:Submitting_bug_reports
Packages changed:
Mesa
Mesa-drivers
gnome-sudoku (43.0 -> 43.1)
icewm (3.3.0 -> 3.3.1)
kernel-source (6.1.7 -> 6.1.8)
libpcap (1.10.1 -> 1.10.3)
libvirt (8.10.0 -> 9.0.0)
nano (7.1 -> 7.2)
python-libvirt-python (8.10.0 -> 9.0.0)
samba (4.17.4+git.303.89e23854eb7 -> 4.17.4+git.314.7b07e3c51a6)
sendmail
squid
systemd
virtualbox (7.0.4 -> 7.0.6)
virtualbox-kmp (7.0.4_k6.1.7_1 -> 7.0.6_k6.1.8_1)
vlgothic-fonts
xf86-video-qxl (0.1.5 -> 0.1.6)
zeromq
=== Details ===
==== Mesa ====
Subpackages: Mesa-dri-devel Mesa-libEGL1 Mesa-libGL1 Mesa-libglapi0 libgbm1
- force usage of gcc 12 only on Leap 15.5; there is no gcc12 on
Leap 15.4
- Add BuildRequires for x264 and x265 in case video_codecs should
be built.
- re-enable build on Leap, but only for 15.5; there is no gcc12
on Leap 15.4, which is now officially required by Mesa 22.3
==== Mesa-drivers ====
Subpackages: Mesa-dri Mesa-gallium Mesa-libva libxatracker2
- force usage of gcc 12 only on Leap 15.5; there is no gcc12 on
Leap 15.4
- Add BuildRequires for x264 and x265 in case video_codecs should
be built.
- re-enable build on Leap, but only for 15.5; there is no gcc12
on Leap 15.4, which is now officially required by Mesa 22.3
==== gnome-sudoku ====
Version update (43.0 -> 43.1)
Subpackages: gnome-sudoku-lang
- Update to version 43.1:
+ Revert "Fix redundant undo stack entries for earmarks".
+ Warnings when solution to puzzle is violated no longer consider
earmarks.
+ Updated translations.
==== icewm ====
Version update (3.3.0 -> 3.3.1)
Subpackages: icewm-config-upstream icewm-default icewm-lang icewm-lite
- Update to 3.3.1:
* Fully support nanosvg as an alternative to librsvg.
* Rolled up windows can now be moved vertically with icesh.
* Fix multi-monitor when primary monitor is right-below of secondary.
* Don't resize when a client adjusts its WM_NORMAL_HINTS increments.
* Report the audio interface in the configure summary.
* Consider that the keyboard may have been changed externally.
* Increase the timeout for the dynamic menu generator to 2 seconds.
* Don't reactivate a focused window when RaiseOnClick is guaranteed.
* Let the winoption "ignorePositionHint" also ignore the USPosition.
* Fix the "ignoreOverrideRedirect" winoption.
* Let icesh also spy on RandR monitor configuration events.
==== kernel-source ====
Version update (6.1.7 -> 6.1.8)
- Linux 6.1.8 (bsc#1012628).
- dma-buf: fix dma_buf_export init order v2 (bsc#1012628).
- btrfs: fix trace event name typo for FLUSH_DELAYED_REFS
(bsc#1012628).
- wifi: iwlwifi: fw: skip PPAG for JF (bsc#1012628).
- pNFS/filelayout: Fix coalescing test for single DS
(bsc#1012628).
- selftests/bpf: check null propagation only neither reg is
PTR_TO_BTF_ID (bsc#1012628).
- net: ethernet: marvell: octeontx2: Fix uninitialized variable
warning (bsc#1012628).
- tools/virtio: initialize spinlocks in vring_test.c
(bsc#1012628).
- vdpa/mlx5: Return error on vlan ctrl commands if not supported
(bsc#1012628).
- vdpa/mlx5: Avoid using reslock in event_handler (bsc#1012628).
- vdpa/mlx5: Avoid overwriting CVQ iotlb (bsc#1012628).
- virtio_pci: modify ENOENT to EINVAL (bsc#1012628).
- vduse: Validate vq_num in vduse_validate_config() (bsc#1012628).
- vdpa_sim_net: should not drop the multicast/broadcast packet
(bsc#1012628).
- net/ethtool/ioctl: return -EOPNOTSUPP if we have no phy stats
(bsc#1012628).
- r8169: move rtl_wol_enable_rx() and rtl_prepare_power_down()
(bsc#1012628).
- r8169: fix dmar pte write access is not set error (bsc#1012628).
- bpf: keep a reference to the mm, in case the task is dead
(bsc#1012628).
- RDMA/srp: Move large values to a new enum for gcc13
(bsc#1012628).
- selftests: net: fix cmsg_so_mark.sh test hang (bsc#1012628).
- btrfs: always report error in run_one_delayed_ref()
(bsc#1012628).
- x86/asm: Fix an assembler warning with current binutils
(bsc#1012628).
- f2fs: let's avoid panic if extent_tree is not created
(bsc#1012628).
- perf/x86/rapl: Treat Tigerlake like Icelake (bsc#1012628).
- cifs: fix race in assemble_neg_contexts() (bsc#1012628).
- memblock tests: Fix compilation error (bsc#1012628).
- perf/x86/rapl: Add support for Intel Meteor Lake (bsc#1012628).
- perf/x86/rapl: Add support for Intel Emerald Rapids
(bsc#1012628).
- of: fdt: Honor CONFIG_CMDLINE* even without /chosen node,
take 2 (bsc#1012628).
- fbdev: omapfb: avoid stack overflow warning (bsc#1012628).
- Bluetooth: hci_sync: Fix use HCI_OP_LE_READ_BUFFER_SIZE_V2
(bsc#1012628).
- Bluetooth: hci_qca: Fix driver shutdown on closed serdev
(bsc#1012628).
- wifi: brcmfmac: fix regression for Broadcom PCIe wifi devices
(bsc#1012628).
- wifi: mac80211: fix MLO + AP_VLAN check (bsc#1012628).
- wifi: mac80211: reset multiple BSSID options in stop_ap()
(bsc#1012628).
- wifi: mac80211: sdata can be NULL during AMPDU start
(bsc#1012628).
- nommu: fix memory leak in do_mmap() error path (bsc#1012628).
- nommu: fix do_munmap() error path (bsc#1012628).
- nommu: fix split_vma() map_count error (bsc#1012628).
- proc: fix PIE proc-empty-vm, proc-pid-vm tests (bsc#1012628).
- Add exception protection processing for vd in
axi_chan_handle_err function (bsc#1012628).
- LoongArch: Add HWCAP_LOONGARCH_CPUCFG to elf_hwcap
(bsc#1012628).
- zonefs: Detect append writes at invalid locations (bsc#1012628).
- nilfs2: fix general protection fault in nilfs_btree_insert()
(bsc#1012628).
- mm/shmem: restore SHMEM_HUGE_DENY precedence over MADV_COLLAPSE
(bsc#1012628).
- hugetlb: unshare some PMDs when splitting VMAs (bsc#1012628).
- mm/khugepaged: fix collapse_pte_mapped_thp() to allow anon_vma
(bsc#1012628).
- serial: stm32: Merge hard IRQ and threaded IRQ handling into
single IRQ handler (bsc#1012628).
- Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling
into single IRQ handler" (bsc#1012628).
- xhci-pci: set the dma max_seg_size (bsc#1012628).
- usb: xhci: Check endpoint is valid before dereferencing it
(bsc#1012628).
- xhci: Fix null pointer dereference when host dies (bsc#1012628).
- xhci: Add update_hub_device override for PCI xHCI hosts
(bsc#1012628).
- xhci: Add a flag to disable USB3 lpm on a xhci root port level
(bsc#1012628).
- usb: acpi: add helper to check port lpm capability using acpi
_DSM (bsc#1012628).
- xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI
tables (bsc#1012628).
- prlimit: do_prlimit needs to have a speculation check
(bsc#1012628).
- USB: serial: option: add Quectel EM05-G (GR) modem
(bsc#1012628).
- USB: serial: option: add Quectel EM05-G (CS) modem
(bsc#1012628).
- USB: serial: option: add Quectel EM05-G (RS) modem
(bsc#1012628).
- USB: serial: option: add Quectel EC200U modem (bsc#1012628).
- USB: serial: option: add Quectel EM05CN (SG) modem
... changelog too long, skipping 227 lines ...
- commit 2ebd33f
==== libpcap ====
Version update (1.10.1 -> 1.10.3)
- update to 1.10.3:
* Sort the PUBHDR variable in Makefile.in in "ls" order.
* Fix typo in comment in pflog.h.
* Remove two no-longer-present files from .gitignore.
* Update code and comments for handling failure to set promiscuous
mode based on new information.
- update to 1.10.2:
* Build system updates
* Developer visible fixes
* Fix some formatting string issues found by cppcheck
* "Dead" pcap_ts from pcap_open_dead() and ..._with_tstamp_precision():
Don't crash if pcap_breakloop() is called.
* Savefiles: multiple bug fixes handling files
* Capture: Never process more than INT_MAX packets in a
pcap_dispatch() call, to avoid integer overflow
* Packet filtering: PFLOG bug fixes and improvements
* Fix memory leak in capture device open
* Fix detection of CAN/CAN FD packets in direction check
* Fix double-free crashes on errors such as running on a kernel
with CONFIG_PACKET_MMAP not configured
* Multiple CANbus bug fixes
* Fix pcap_findalldevs() to find usbmon devices
* Fix handling of VLAN tagged packets if the link-layer type is
changed from DLT_LINUX_SLL to DLT_LINUX_SLL2
* Always turn on PACKET_AUXDATA
* Correctly compute the "real" length for isochronous USB transfers
==== libvirt ====
Version update (8.10.0 -> 9.0.0)
Subpackages: libvirt-client libvirt-daemon libvirt-daemon-config-network libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-storage-core libvirt-daemon-driver-storage-disk libvirt-daemon-driver-storage-iscsi libvirt-daemon-driver-storage-iscsi-direct libvirt-daemon-driver-storage-logical libvirt-daemon-driver-storage-mpath libvirt-daemon-driver-storage-rbd libvirt-daemon-driver-storage-scsi libvirt-daemon-qemu libvirt-daemon-xen libvirt-libs
- Update to libvirt 9.0.0
- jsc#PED-620
- Many incremental improvements and bug fixes, see
https://libvirt.org/news.html#v9-0-0-2023-01-16
- Added patches:
ef482951-apparmor-Allow-umount-dev.patch,
d6a8b9ee-qemu-Fix-managed-no-when-creating-ethdev.patch
==== nano ====
Version update (7.1 -> 7.2)
Subpackages: nano-lang
- update to 7.2:
*