This is very curious. I am trying to setup a Lexmark T520 laserprinter. When I use the PPD from the Windows driver (the same PPD is also found here: ) in YasT it gives an error and does not permit use of the PPD file: Checking file "./LEXT520.PPD" ./LEXT520.PPD: FAIL **FAIL** BAD PSVersion - not "(string) int". REF: Pages 62-64, section 5.3. WARN File contains a mix of CR, LF, and CR LF line endings! WARN Non-Windows PPD files should use lines ending with only LF, not CR LF! WARN Obsolete PPD version 4.2! REF: Page 42, section 5.2. WARN Manufacturer required by PPD 4.3 spec. REF: Pages 58-59, section 5.3. WARN Duplex shares a common prefix with Duplexer REF: Page 15, section 3.2. 0 files passed Problem is its a valid PPD file and if I setup the printer with an http-browser at localhost:631 it works fine. Also I can not find any documentation about this error anyplace on the internet. This isn't a cheap host-based or "winprinter" its a "real" printer that supports Postscript (hence the PPD) 1) The PPD-checking needs to be fixed 2) The error message needs to be changed to express something meaningful or the errormessage needs to be carefully documented. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org