April 2021 - openSUSE Commits - openSUSE Mailing Lists

commit qemu for openSUSE:Factory
by Source-Sync 30 Apr '21

30 Apr '21

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package qemu for openSUSE:Factory checked in at 2021-05-01 00:46:18 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/qemu (Old) and /work/SRC/openSUSE:Factory/.qemu.new.1947 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "qemu" Sat May 1 00:46:18 2021 rev:202 rq:889331 version:unknown Changes: -------- --- /work/SRC/openSUSE:Factory/qemu/qemu.changes 2021-04-18 21:44:22.480647181 +0200 +++ /work/SRC/openSUSE:Factory/.qemu.new.1947/qemu.changes 2021-05-01 00:46:23.263535126 +0200 @@ -1,0 +2,24 @@ +Mon Apr 19 15:40:22 UTC 2021 - Bruce Rogers <brogers(a)suse.com> + +- Include upstream patch designated as stable material and reviewed + for applicability to include here + mptsas-Remove-unused-MPTSASState-pending.patch +- Clarify in support documents that cpu-add was removed in this + release from both the human monitor protocol (HMP) and QMP + interfaces + +------------------------------------------------------------------- +Thu Apr 15 17:19:42 UTC 2021 - Bruce Rogers <brogers(a)suse.com> + +- 6.0.0 qemu is about to be released. Add comments to the in- + package support documents (supported.<arch>.txt) about the new + deprecations as of that release as an early head's up for qemu + users. These deprecations include these command-line options: + -M option: kernel-irqchip=off + -chardev tty + -chardev paraport + -enable-fips + -writeconfig + -spice password=string + +------------------------------------------------------------------- New: ---- mptsas-Remove-unused-MPTSASState-pending.patch ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ qemu.spec ++++++ --- /var/tmp/diff_new_pack.oYBvrH/_old 2021-05-01 00:46:25.467525307 +0200 +++ /var/tmp/diff_new_pack.oYBvrH/_new 2021-05-01 00:46:25.471525289 +0200 @@ -213,52 +213,53 @@ Patch00078: hw-arm-virt-acpi-build-Fix-GSIV-values-o.patch Patch00079: hw-isa-Kconfig-Add-missing-dependency-VI.patch Patch00080: hw-isa-piix4-Migrate-Reset-Control-Regis.patch -Patch00081: net-vmxnet3-validate-configuration-value.patch -Patch00082: XXX-dont-dump-core-on-sigabort.patch -Patch00083: qemu-binfmt-conf-Modify-default-path.patch -Patch00084: qemu-cvs-gettimeofday.patch -Patch00085: qemu-cvs-ioctl_debug.patch -Patch00086: qemu-cvs-ioctl_nodirection.patch -Patch00087: linux-user-add-binfmt-wrapper-for-argv-0.patch -Patch00088: PPC-KVM-Disable-mmu-notifier-check.patch -Patch00089: linux-user-binfmt-support-host-binaries.patch -Patch00090: linux-user-Fake-proc-cpuinfo.patch -Patch00091: linux-user-use-target_ulong.patch -Patch00092: Make-char-muxer-more-robust-wrt-small-FI.patch -Patch00093: linux-user-lseek-explicitly-cast-non-set.patch -Patch00094: AIO-Reduce-number-of-threads-for-32bit-h.patch -Patch00095: xen_disk-Add-suse-specific-flush-disable.patch -Patch00096: qemu-bridge-helper-reduce-security-profi.patch -Patch00097: qemu-binfmt-conf-use-qemu-ARCH-binfmt.patch -Patch00098: roms-Makefile-pass-a-packaging-timestamp.patch -Patch00099: Raise-soft-address-space-limit-to-hard-l.patch -Patch00100: increase-x86_64-physical-bits-to-42.patch -Patch00101: i8254-Fix-migration-from-SLE11-SP2.patch -Patch00102: acpi_piix4-Fix-migration-from-SLE11-SP2.patch -Patch00103: Make-installed-scripts-explicitly-python.patch -Patch00104: hw-smbios-handle-both-file-formats-regar.patch -Patch00105: xen-add-block-resize-support-for-xen-dis.patch -Patch00106: tests-qemu-iotests-Triple-timeout-of-i-o.patch -Patch00107: tests-Fix-block-tests-to-be-compatible-w.patch -Patch00108: xen-ignore-live-parameter-from-xen-save-.patch -Patch00109: tests-change-error-message-in-test-162.patch -Patch00110: hw-intc-exynos4210_gic-provide-more-room.patch -Patch00111: configure-only-populate-roms-if-softmmu.patch -Patch00112: pc-bios-s390-ccw-net-avoid-warning-about.patch -Patch00113: roms-change-cross-compiler-naming-to-be-.patch -Patch00114: test-add-mapping-from-arch-of-i686-to-qe.patch -Patch00115: configure-remove-pkgversion-from-CONFIG_.patch -Patch00116: docs-add-SUSE-support-statements-to-html.patch -Patch00117: s390x-Fix-stringop-truncation-issue-repo.patch -Patch00118: Revert-qht-constify-qht_statistics_init.patch -Patch00119: qht-Revert-some-constification-in-qht.c.patch -Patch00120: meson-install-ivshmem-client-and-ivshmem.patch -Patch00121: Revert-roms-efirom-tests-uefi-test-tools.patch -Patch00122: Makefile-Don-t-check-pc-bios-as-pre-requ.patch -Patch00123: roms-Makefile-add-cross-file-to-qboot-me.patch -Patch00124: usb-Help-compiler-out-to-avoid-a-warning.patch -Patch00125: module-for-virtio-gpu-pre-load-module-to.patch -Patch00126: qom-handle-case-of-chardev-spice-module-.patch +Patch00081: mptsas-Remove-unused-MPTSASState-pending.patch +Patch00082: net-vmxnet3-validate-configuration-value.patch +Patch00083: XXX-dont-dump-core-on-sigabort.patch +Patch00084: qemu-binfmt-conf-Modify-default-path.patch +Patch00085: qemu-cvs-gettimeofday.patch +Patch00086: qemu-cvs-ioctl_debug.patch +Patch00087: qemu-cvs-ioctl_nodirection.patch +Patch00088: linux-user-add-binfmt-wrapper-for-argv-0.patch +Patch00089: PPC-KVM-Disable-mmu-notifier-check.patch +Patch00090: linux-user-binfmt-support-host-binaries.patch +Patch00091: linux-user-Fake-proc-cpuinfo.patch +Patch00092: linux-user-use-target_ulong.patch +Patch00093: Make-char-muxer-more-robust-wrt-small-FI.patch +Patch00094: linux-user-lseek-explicitly-cast-non-set.patch +Patch00095: AIO-Reduce-number-of-threads-for-32bit-h.patch +Patch00096: xen_disk-Add-suse-specific-flush-disable.patch +Patch00097: qemu-bridge-helper-reduce-security-profi.patch +Patch00098: qemu-binfmt-conf-use-qemu-ARCH-binfmt.patch +Patch00099: roms-Makefile-pass-a-packaging-timestamp.patch +Patch00100: Raise-soft-address-space-limit-to-hard-l.patch +Patch00101: increase-x86_64-physical-bits-to-42.patch +Patch00102: i8254-Fix-migration-from-SLE11-SP2.patch +Patch00103: acpi_piix4-Fix-migration-from-SLE11-SP2.patch +Patch00104: Make-installed-scripts-explicitly-python.patch +Patch00105: hw-smbios-handle-both-file-formats-regar.patch +Patch00106: xen-add-block-resize-support-for-xen-dis.patch +Patch00107: tests-qemu-iotests-Triple-timeout-of-i-o.patch +Patch00108: tests-Fix-block-tests-to-be-compatible-w.patch +Patch00109: xen-ignore-live-parameter-from-xen-save-.patch +Patch00110: tests-change-error-message-in-test-162.patch +Patch00111: hw-intc-exynos4210_gic-provide-more-room.patch +Patch00112: configure-only-populate-roms-if-softmmu.patch +Patch00113: pc-bios-s390-ccw-net-avoid-warning-about.patch +Patch00114: roms-change-cross-compiler-naming-to-be-.patch +Patch00115: test-add-mapping-from-arch-of-i686-to-qe.patch +Patch00116: configure-remove-pkgversion-from-CONFIG_.patch +Patch00117: docs-add-SUSE-support-statements-to-html.patch +Patch00118: s390x-Fix-stringop-truncation-issue-repo.patch +Patch00119: Revert-qht-constify-qht_statistics_init.patch +Patch00120: qht-Revert-some-constification-in-qht.c.patch +Patch00121: meson-install-ivshmem-client-and-ivshmem.patch +Patch00122: Revert-roms-efirom-tests-uefi-test-tools.patch +Patch00123: Makefile-Don-t-check-pc-bios-as-pre-requ.patch +Patch00124: roms-Makefile-add-cross-file-to-qboot-me.patch +Patch00125: usb-Help-compiler-out-to-avoid-a-warning.patch +Patch00126: module-for-virtio-gpu-pre-load-module-to.patch +Patch00127: qom-handle-case-of-chardev-spice-module-.patch # Patches applied in roms/seabios/: Patch01000: seabios-use-python2-explicitly-as-needed.patch Patch01001: seabios-switch-to-python3-as-needed.patch @@ -1203,23 +1204,24 @@ %patch00113 -p1 %patch00114 -p1 %patch00115 -p1 -%if %{legacy_qemu_kvm} %patch00116 -p1 -%endif +%if %{legacy_qemu_kvm} %patch00117 -p1 +%endif %patch00118 -p1 %patch00119 -p1 %patch00120 -p1 %patch00121 -p1 %patch00122 -p1 -%ifarch aarch64 %patch00123 -p1 -%endif -%ifarch %arm %ix86 ppc +%ifarch aarch64 %patch00124 -p1 %endif +%ifarch %arm %ix86 ppc %patch00125 -p1 +%endif %patch00126 -p1 +%patch00127 -p1 %patch01000 -p1 %patch01001 -p1 %patch01002 -p1 ++++++ README.PACKAGING ++++++ --- /var/tmp/diff_new_pack.oYBvrH/_old 2021-05-01 00:46:25.627524595 +0200 +++ /var/tmp/diff_new_pack.oYBvrH/_new 2021-05-01 00:46:25.631524576 +0200 @@ -30,14 +30,16 @@ 'opensuse-', so, for example, for the v5.2.0 based SLE-15-SP3 qemu, the branch would be named 'opensuse-5.2'. You want to start your work based on the current patchqueue as contained in 'frombundle', so one approach is to do (depending on -your local repo's current state), 'branch -B opensuse-5.2 frombundle', and then -cherry-pick upstream patches into it, or interactive rebase it to modify or -delete patches, etc. Be careful to keep the branch based on the upstream tag -which represents the package tarball however! Once you have the patch queue -ready to go, simply run 'bash ./update_git.sh git2pkg' (in your local obs branch -directory) to refresh the bundles.tar.xz file, as well as the package spec and -patch files. The package qemu.changes file is modified to list added or removed -patches as a starting point for documenting the change. +your local repo's current state), 'git checkout -f --recurse-submodules -B + opensuse-5.2 frombundle', and then cherry-pick upstream patches into it, or +interactive rebase it to modify or delete patches, etc. Be careful to keep the +branch based on the upstream tag which represents the package tarball however! + +Once you have the patch queue ready to go, simply run 'bash ./update_git.sh +git2pkg' (in your local obs branch directory) to refresh the bundles.tar.xz +file, as well as the package spec and patch files. The package qemu.changes file +is modified to list added or removed patches as a starting point for documenting +the change. When you are ready to check in the package, using 'bash update_git.sh ci' is provided as a convenience (and to help preserve correct spec file formatting, ++++++ bundles.tar.xz ++++++ Binary files old/553032db17440f8de011390e5a1cfddd13751b0b.bundle and new/553032db17440f8de011390e5a1cfddd13751b0b.bundle differ ++++++ mptsas-Remove-unused-MPTSASState-pending.patch ++++++ From: Michael Tokarev <mjt(a)tls.msk.ru> Date: Mon, 19 Apr 2021 15:42:47 +0200 Subject: mptsas: Remove unused MPTSASState 'pending' field (CVE-2021-3392) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Git-commit: 3791642c8d60029adf9b00bcb4e34d7d8a1aea4d While processing SCSI i/o requests in mptsas_process_scsi_io_request(), the Megaraid emulator appends new MPTSASRequest object 'req' to the 's->pending' queue. In case of an error, this same object gets dequeued in mptsas_free_request() only if SCSIRequest object 'req->sreq' is initialised. This may lead to a use-after-free issue. Since s->pending is actually not used, simply remove it from MPTSASState. Cc: qemu-stable(a)nongnu.org Signed-off-by: Michael Tokarev <mjt(a)tls.msk.ru> Reviewed-by: Philippe Mathieu-Daud�� <philmd(a)redhat.com> Signed-off-by: Philippe Mathieu-Daud�� <philmd(a)redhat.com> Reported-by: Cheolwoo Myung <cwmyung(a)snu.ac.kr> Message-id: 20210419134247.1467982-1-f4bug(a)amsat.org Message-Id: <20210416102243.1293871-1-mjt(a)msgid.tls.msk.ru> Suggested-by: Paolo Bonzini <pbonzini(a)redhat.com> Reported-by: Cheolwoo Myung <cwmyung(a)snu.ac.kr> BugLink: https://bugs.launchpad.net/qemu/+bug/1914236 (CVE-2021-3392) Fixes: e351b826112 ("hw: Add support for LSI SAS1068 (mptsas) device") [PMD: Reworded description, added more tags] Signed-off-by: Philippe Mathieu-Daud�� <philmd(a)redhat.com> Reviewed-by: Peter Maydell <peter.maydell(a)linaro.org> Signed-off-by: Peter Maydell <peter.maydell(a)linaro.org> Signed-off-by: Bruce Rogers <brogers(a)suse.com> --- hw/scsi/mptsas.c | 6 ------ hw/scsi/mptsas.h | 1 - 2 files changed, 7 deletions(-) diff --git a/hw/scsi/mptsas.c b/hw/scsi/mptsas.c index f86616544bacf71da60270ad06ed..12c957e06be41e80963bcabae1f8 100644 --- a/hw/scsi/mptsas.c +++ b/hw/scsi/mptsas.c @@ -251,13 +251,10 @@ static int mptsas_build_sgl(MPTSASState *s, MPTSASRequest *req, hwaddr addr) static void mptsas_free_request(MPTSASRequest *req) { - MPTSASState *s = req->dev; - if (req->sreq != NULL) { req->sreq->hba_private = NULL; scsi_req_unref(req->sreq); req->sreq = NULL; - QTAILQ_REMOVE(&s->pending, req, next); } qemu_sglist_destroy(&req->qsg); g_free(req); @@ -303,7 +300,6 @@ static int mptsas_process_scsi_io_request(MPTSASState *s, } req = g_new0(MPTSASRequest, 1); - QTAILQ_INSERT_TAIL(&s->pending, req, next); req->scsi_io = *scsi_io; req->dev = s; @@ -1318,8 +1314,6 @@ static void mptsas_scsi_realize(PCIDevice *dev, Error **errp) s->request_bh = qemu_bh_new(mptsas_fetch_requests, s); - QTAILQ_INIT(&s->pending); - scsi_bus_new(&s->bus, sizeof(s->bus), &dev->qdev, &mptsas_scsi_info, NULL); } diff --git a/hw/scsi/mptsas.h b/hw/scsi/mptsas.h index b85ac1a5fcc7ad3ffc72923c734c..c046497db71989a564ed46481036 100644 --- a/hw/scsi/mptsas.h +++ b/hw/scsi/mptsas.h @@ -79,7 +79,6 @@ struct MPTSASState { uint16_t reply_frame_size; SCSIBus bus; - QTAILQ_HEAD(, MPTSASRequest) pending; }; void mptsas_fix_scsi_io_endianness(MPIMsgSCSIIORequest *req); ++++++ supported.arm.txt ++++++ --- /var/tmp/diff_new_pack.oYBvrH/_old 2021-05-01 00:46:26.167522189 +0200 +++ /var/tmp/diff_new_pack.oYBvrH/_new 2021-05-01 00:46:26.167522189 +0200 @@ -146,8 +146,9 @@ This website tracks feature deprecation and removal at the upstream development level. Our qemu package inherits this community direction, but be aware that we can and will deviate as needed. Those deviations and additional - information can be found in this section. Feature deprecation is also tracked - in Appendix B of the qemu-doc.* files installed with the qemu package. + information can be found in this section. Feature deprecation as well as + removed features are also tracked in the "QEMU System Emulator User's Guide" + section of the documentation installed with the qemu package. - The use of "?" as a parameter to "-cpu", "-soundhw", "-device", "-M", "-machine" and "-d" is now considered deprecated. Use "help" @@ -173,6 +174,12 @@ -device virtio-blk,scsi= (use virtio-scsi instead) -device virtio-blk-pci,scsi= (use virtio-scsi instead) -realtime mlock= (use -overcommit mem-lock- instead) + (the following are early notices of deprecation in a future qemu version) + -chardev tty (use serial name instead) + -chardev paraport (use parallel name instead) + -enable-fips (not really helpful - see https://git.qemu.org/?p=qemu.git;a=commit;h=166310299a1e7824bbff17e1f016659… for details) + -spice password=string (use password-string option instead) + -writeconfig (no replacement - never really worked right) - These previously supported command line options are no longer supported: <previously mentioned items have been moved to another category> @@ -219,7 +226,6 @@ - These previously supported QMP commands are now deprecated: change (use blockdev-change-medium or change-vnc-password instead) - cpu-add migrate-set-cache-size (use migrate-set-parameters instead) migrate_set_downtime (use migrate-set-parameters instead) migrate_set_speed (use migrate-set-parameters instead) @@ -228,15 +234,15 @@ query-migrate-cache-size (use query-migrate-parameters instead) - This previously supported QMP command is no longer recognized: + cpu-add (use device_add instead) - These previously supported monitor commands are now deprecated: change - cpu-add migrate_set_downtime migrate_set_speed - These previously supported monitor commands are no longer recognized: - cpu-add + cpu-add (use device_add instead) pci_add (use device_add instead) pci_del (use device_del instead) usb_add (use device_add instead) @@ -539,7 +545,6 @@ closefd cont cpu - cpu-add device_add device_del device-list-properties ++++++ supported.s390.txt ++++++ --- /var/tmp/diff_new_pack.oYBvrH/_old 2021-05-01 00:46:26.207522011 +0200 +++ /var/tmp/diff_new_pack.oYBvrH/_new 2021-05-01 00:46:26.207522011 +0200 @@ -142,8 +142,9 @@ This website tracks feature deprecation and removal at the upstream development level. Our qemu package inherits this community direction, but be aware that we can and will deviate as needed. Those deviations and additional - information can be found in this section. Feature deprecation is also tracked - in Appendix B of the qemu-doc.* files installed with the qemu package. + information can be found in this section. Feature deprecation as well as + removed features are also tracked in the "QEMU System Emulator User's Guide" + section of the documentation installed with the qemu package. - The use of "?" as a parameter to "-cpu", "-soundhw", "-device", "-M", "-machine" and "-d" is now considered deprecated. Use "help" @@ -164,10 +165,16 @@ considered deprecated. In the future those names will be standardized to acpitable, boot, and smp respectively. -- This previously supported command line option is now considered deprecated: +- These previously supported command line options are now considered deprecated: -device virtio-blk,scsi= (use virtio-scsi instead) -device virtio-blk-pci,scsi= (use virtio-scsi instead) -realtime mlock= (use -overcommit mem-lock= instead) + (the following are early notices of deprecation in a future qemu version) + -chardev tty (use serial name instead) + -chardev paraport (use parallel name instead) + -enable-fips (not really helpful - see https://git.qemu.org/?p=qemu.git;a=commit;h=166310299a1e7824bbff17e1f016659… for details) + -spice password=string (use password-string option instead) + -writeconfig (no replacement - never really worked right) - These previously supported command line options are no longer supported: <previously mentioned items have been moved to another category> @@ -212,7 +219,6 @@ - These previously supported QMP commands are now deprecated: change (use blockdev-change-medium or change-vnc-password instead) - cpu-add migrate-set-cache-size (use migrate-set-parameters instead) migrate_set_downtime (use migrate-set-parameters instead) migrate_set_speed (use migrate-set-parameters instead) @@ -220,13 +226,16 @@ query-events query-migrate-cache-size (use query-migrate-parameters instead) +- This previously supported QMP command is no longer recognized: + cpu-add (use device_add instead) + - These previously supported monitor commands are now deprecated: change migrate_set_downtime migrate_set_speed - These previously supported monitor commands are no longer recognized: - cpu-add + cpu-add (use device_add instead) pci_add (use device_add instead) pci_del (use device_del instead) @@ -532,7 +541,6 @@ closefd cont cpu - cpu-add device_add device_del device-list-properties ++++++ supported.x86.txt ++++++ --- /var/tmp/diff_new_pack.oYBvrH/_old 2021-05-01 00:46:26.239521868 +0200 +++ /var/tmp/diff_new_pack.oYBvrH/_new 2021-05-01 00:46:26.239521868 +0200 @@ -165,8 +165,9 @@ This website tracks feature deprecation and removal at the upstream development level. Our qemu package inherits this community direction, but be aware that we can and will deviate as needed. Those deviations and additional - information can be found in this section. Feature deprecation is also tracked - in Appendix B of the qemu-doc.* files installed with the qemu package. + information can be found in this section. Feature deprecation as well as + removed features are also tracked in the "QEMU System Emulator User's Guide" + section of the documentation installed with the qemu package. - When no video adapter is specified, the default used is stdvga. This differs from the default of prior releases which was cirrus. The cirrus adapter was @@ -211,6 +212,13 @@ -device virtio-blk,scsi= (use virtio-scsi instead) -device virtio-blk-pci,scsi= (use virtio-scsi instead) -realtime mlock= (use -overcommit mem-lock= instead) + (the following are early notices of deprecation in a future qemu version) + -M option kernel-irqchip=off + -chardev tty (use serial name instead) + -chardev paraport (use parallel name instead) + -enable-fips (not really helpful - see https://git.qemu.org/?p=qemu.git;a=commit;h=166310299a1e7824bbff17e1f016659… for details) + -spice password=string (use password-string option instead) + -writeconfig (no replacement - never really worked right) - These previously supported command line options are no longer supported: <previously mentioned items have been moved to another category> @@ -297,7 +305,6 @@ - These previously supported QMP commands are now deprecated: change (use blockdev-change-medium or change-vnc-password instead) - cpu-add migrate-set-cache-size (use migrate-set-parameters instead) migrate_set_downtime (use migrate-set-parameters instead) migrate_set_speed (use migrate-set-parameters instead) @@ -305,13 +312,16 @@ query-events query-migrate-cache-size (use query-migrate-parameters instead) +- This previously supported QMP command is no longer recognized: + cpu-add (use device_add instead) + - These previously supported monitor commands are now deprecated: change migrate_set_downtime migrate_set_speed - These previously supported monitor commands are no longer recognized: - cpu-add + cpu-add (use device_add instead) cpu_set pci_add (use device_add instead) pci_del (use device_del instead) @@ -658,7 +668,6 @@ closefd cont cpu - cpu-add device_add device_del device-list-properties ++++++ update_git.sh ++++++ --- /var/tmp/diff_new_pack.oYBvrH/_old 2021-05-01 00:46:26.295521619 +0200 +++ /var/tmp/diff_new_pack.oYBvrH/_new 2021-05-01 00:46:26.299521601 +0200 @@ -14,6 +14,20 @@ #============================================================================== +clean_up_temp_dirs() +{ +echo "Cleaning temporary files before exit" +rm -rf $GIT_DIR +rm -rf $CMP_DIR +rm -rf $BUN_DIR +exit +} + +# handle signals gracefully by cleaning the temporary data used before exit +trap clean_up_temp_dirs EXIT + +#============================================================================== + check_requirements() { RC=0 if [[ ! -e ./config.sh ]]; then @@ -508,7 +522,11 @@ else PREFIX=$(echo $VALUE|tail -c 5) fi - cp $patchname savedir/$PREFIX-$patchname + if [[ "$NUMBERED_PATCHES" = "0" ]]; then + cp $patchname savedir/$PREFIX-$patchname + else + cp $patchname savedir/$patchname + fi let COUNTER+=1 done fi @@ -815,15 +833,6 @@ #============================================================================== -clean_up_temp_dirs() -{ -rm -rf $GIT_DIR -rm -rf $CMP_DIR -rm -rf $BUN_DIR -} - -#============================================================================== - if [[ ! -e $(readlink -f ${LOCAL_REPO_MAP[0]}) ]]; then echo "No local repo found at ${LOCAL_REPO_MAP[0]}" if [ "$GIT_UPSTREAM_COMMIT_ISH" = "LATEST" ]; then @@ -952,7 +961,6 @@ else if [ "$1" ]; then echo "ERROR: unrecognized option '$1'. Script in LATEST mode only recognizes 'pause' and 'continue' options" - clean_up_temp_dirs exit fi fi @@ -985,7 +993,6 @@ echo "continue after rebase selected but tarball is out of date. Continuing not possible." echo "If desired, save your rebase work (eg, branch $GIT_BRANCH), because otherwise it will" echo "be lost. Then run script again without the continue option" - clean_up_temp_dirs exit fi redo_tarball_and_rebase_patches &> ~/latest.log # This includes a bundle2local @@ -996,7 +1003,6 @@ if [[ "$PAUSE_BEFORE_BUNDLE_CREATION" = "1" ]]; then echo "Feel free to also do the work now occasioned by the selected 'pause' option" fi - clean_up_temp_dirs exit fi CONTINUE_AFTER_REBASE=1 @@ -1005,7 +1011,6 @@ echo "As requested, pausing before re-creating bundle of bundles for additional patch or specfile work" echo "(using current 'ready to go' $GIT_BRANCH branch of local repos to produce patches.)" echo "When changes are complete, finish the workflow by passing 'continue' to script" - clean_up_temp_dirs exit fi if [ "$CONTINUE_AFTER_REBASE" = "1" ]; then @@ -1051,5 +1056,4 @@ ;; esac fi -clean_up_temp_dirs exit

1 0

commit branding-openSUSE for openSUSE:Factory
by Source-Sync 30 Apr '21

30 Apr '21

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package branding-openSUSE for openSUSE:Factory checked in at 2021-05-01 00:46:16 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/branding-openSUSE (Old) and /work/SRC/openSUSE:Factory/.branding-openSUSE.new.1947 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "branding-openSUSE" Sat May 1 00:46:16 2021 rev:116 rq:889326 version:84.87.20200106 Changes: -------- --- /work/SRC/openSUSE:Factory/branding-openSUSE/branding-openSUSE.changes 2021-03-08 15:17:20.429942350 +0100 +++ /work/SRC/openSUSE:Factory/.branding-openSUSE.new.1947/branding-openSUSE.changes 2021-05-01 00:46:22.147540097 +0200 @@ -1,0 +2,7 @@ +Thu Apr 29 14:05:43 UTC 2021 - Dominique Leuenberger <dimstar(a)opensuse.org> + +- Also skip *.tr as config files in + /etc/bootsplash/themes/openSUSE/bootloader (in addition to + /etc/bootsplash/themes/openSUSE/cdrom) + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ branding-openSUSE.spec ++++++ --- /var/tmp/diff_new_pack.8SbdKJ/_old 2021-05-01 00:46:22.879536836 +0200 +++ /var/tmp/diff_new_pack.8SbdKJ/_new 2021-05-01 00:46:22.883536818 +0200 @@ -317,8 +317,8 @@ %if 0%{?gfxboot} > 0 %files -n gfxboot-branding-%{theme_name} %{_sysconfdir}/bootsplash -%config %{_sysconfdir}/bootsplash/themes/openSUSE/bootloader/* # Intentionally skipping over .tr files as they are hard links +%config %{_sysconfdir}/bootsplash/themes/openSUSE/bootloader/*.{hlp,jpg,mod,dat,txt,tlk,cfg,fnt} %config %{_sysconfdir}/bootsplash/themes/openSUSE/cdrom/*.{hlp,jpg,mod,dat,txt,tlk,cfg,fnt} %config %{_sysconfdir}/bootsplash/themes/openSUSE/cdrom/bootlogo %{_sysconfdir}/bootsplash/themes/openSUSE/cdrom/*

1 0

commit sensors for openSUSE:Factory
by Source-Sync 30 Apr '21

30 Apr '21

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package sensors for openSUSE:Factory checked in at 2021-05-01 00:46:15 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/sensors (Old) and /work/SRC/openSUSE:Factory/.sensors.new.1947 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "sensors" Sat May 1 00:46:15 2021 rev:106 rq:889321 version:3.6.0 Changes: -------- --- /work/SRC/openSUSE:Factory/sensors/sensors.changes 2021-02-18 20:47:41.087158332 +0100 +++ /work/SRC/openSUSE:Factory/.sensors.new.1947/sensors.changes 2021-05-01 00:46:20.239548597 +0200 @@ -1,0 +2,7 @@ +Mon Apr 26 13:06:50 UTC 2021 - Jean Delvare <jdelvare(a)suse.com> + +- change-pidfile-path-from-var-run-to-run.patch: Change PIDFile + path from /var/run to /run (bsc#1185183). +- var-run-deprecated.patch: /var/run is deprecated (bsc#1185183). + +------------------------------------------------------------------- New: ---- change-pidfile-path-from-var-run-to-run.patch var-run-deprecated.patch ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ sensors.spec ++++++ --- /var/tmp/diff_new_pack.MnfLRG/_old 2021-05-01 00:46:21.091544801 +0200 +++ /var/tmp/diff_new_pack.MnfLRG/_new 2021-05-01 00:46:21.095544783 +0200 @@ -43,12 +43,15 @@ #PATCH-FEATURE-UPSTREAM add ftsteutates support Patch7: lm_sensors-3.4.0-sensors-detect-add-ftsteutates-support.patch Patch8: lm_sensors-3.5.0-libsensors-fix-soname.patch -#PATCH-FEATURE-UPSTREAM add ftsteutates support +#PATCH-FEATURE-UPSTREAM fix w83677hgi support Patch9: lm_sensors-3.6.0-sensors-detect-fix-driver-for-w83677hgi.patch #PATCH-FIX-UPSTREAM Deal gracefully with unreadable fan inputs Patch10: pwmconfig-handle-fan-input-error.patch #PATCH-FIX-UPSTREAM Further raise the fan threshold Patch11: pwmconfig-raise-fan-threshold.patch +#PATCH-FIX-UPSTREAM Change PIDFile path from /var/run to /run +Patch12: change-pidfile-path-from-var-run-to-run.patch +Patch13: var-run-deprecated.patch BuildRequires: bison BuildRequires: flex BuildRequires: rrdtool-devel @@ -120,6 +123,8 @@ %patch9 -p1 %patch10 -p1 %patch11 -p1 +%patch12 -p1 +%patch13 -p1 %build RPM_OPT_FLAGS="%{optflags}" ++++++ change-pidfile-path-from-var-run-to-run.patch ++++++ From: puneetse <22071208+puneetse(a)users.noreply.github.com> Date: Wed, 11 Mar 2020 09:36:51 -0700 Subject: Change PIDFile path from /var/run to /run Git-commit: 25f4f8793730ef3d170f1f2bd729a82fd61a4784 Patch-mainline: Yes References: bsc#1185183 /var/run is considered a legacy directory by systemd 239+ and having it in unit files causes a warning to be emitted to the journal. --- prog/init/fancontrol.service | 2 +- prog/init/sensord.service | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) --- a/prog/init/fancontrol.service +++ b/prog/init/fancontrol.service @@ -5,7 +5,7 @@ After=lm_sensors.service [Service] Type=simple -PIDFile=/var/run/fancontrol.pid +PIDFile=/run/fancontrol.pid ExecStart=/usr/sbin/fancontrol [Install] --- a/prog/init/sensord.service +++ b/prog/init/sensord.service @@ -5,7 +5,7 @@ After=lm_sensors.service [Service] EnvironmentFile=/etc/sysconfig/sensord Type=forking -PIDFile=/var/run/sensord.pid +PIDFile=/run/sensord.pid ExecStart=/usr/sbin/sensord -i $INTERVAL -l $LOG_INTERVAL -f daemon $SENSORD_ARGS [Install] ++++++ var-run-deprecated.patch ++++++ From: Jean Delvare <jdelvare(a)suse.de> Subject: /var/run is deprecated Patch-mainline: Not yet, will submit later today References: bsc#1185183 Systemd now wants PID files in /run, not /var/run. Service files have been updated upstream already, but not the path used by the actual programs. Change them too so that things don't break when the /var/run symlink is eventually dropped. --- prog/pwm/fancontrol | 2 +- prog/pwm/pwmconfig | 2 +- prog/sensord/args.c | 4 ++-- prog/sensord/sensord.8 | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) --- a/prog/pwm/fancontrol +++ b/prog/pwm/fancontrol @@ -38,7 +38,7 @@ # # -PIDFILE="/var/run/fancontrol.pid" +PIDFILE="/run/fancontrol.pid" #DEBUG=1 MAX=255 --- a/prog/pwm/pwmconfig +++ b/prog/pwm/pwmconfig @@ -30,7 +30,7 @@ # LM_VERSION='3.6.0' -PIDFILE="/var/run/fancontrol.pid" +PIDFILE="/run/fancontrol.pid" if [ -f "$PIDFILE" ] then --- a/prog/sensord/args.c +++ b/prog/sensord/args.c @@ -33,7 +33,7 @@ #include "version.h" struct sensord_arguments sensord_args = { - .pidFile = "/var/run/sensord.pid", + .pidFile = "/run/sensord.pid", .scanTime = 60, .logTime = 30 * 60, .rrdTime = 5 * 60, @@ -97,7 +97,7 @@ static const char *daemonSyntax = " -T, --rrd-no-average -- switch RRD in non-average mode\n" " -r, --rrd-file <file> -- RRD file (default <none>)\n" " -c, --config-file <file> -- configuration file\n" - " -p, --pid-file <file> -- PID file (default /var/run/sensord.pid)\n" + " -p, --pid-file <file> -- PID file (default /run/sensord.pid)\n" " -f, --syslog-facility <f> -- syslog facility to use (default local4)\n" " -g, --rrd-cgi <img-dir> -- output an RRD CGI script and exit\n" " -a, --load-average -- include load average in RRD file\n" --- a/prog/sensord/sensord.8 +++ b/prog/sensord/sensord.8 @@ -86,7 +86,7 @@ configuration file is used. .IP "-p, --pid-file file" Specify what PID file to write; the default is to write the file -`/var/run/sensord.pid'. You should always specify an absolute path +`/run/sensord.pid'. You should always specify an absolute path here. The file is removed when the daemon exits. .IP "-f, --syslog-facility facility" Specify the

1 0

commit libgsm for openSUSE:Factory
by Source-Sync 30 Apr '21

30 Apr '21

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package libgsm for openSUSE:Factory checked in at 2021-05-01 00:46:15 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/libgsm (Old) and /work/SRC/openSUSE:Factory/.libgsm.new.1947 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "libgsm" Sat May 1 00:46:15 2021 rev:27 rq:889288 version:1.0.19 Changes: -------- --- /work/SRC/openSUSE:Factory/libgsm/libgsm.changes 2019-08-16 15:32:12.301933834 +0200 +++ /work/SRC/openSUSE:Factory/.libgsm.new.1947/libgsm.changes 2021-05-01 00:46:19.383552410 +0200 @@ -1,0 +2,9 @@ +Thu Apr 29 07:40:46 UTC 2021 - Dirk M��ller <dmueller(a)suse.com> + +- update to 1.0.19: + * Make it easier to include gsm.h from C++ by wrapping it with macros. + Throw a #define _POSIX_C_SOURCE 200809L into toast.h to make it + possible for Linux glibc to just work. + * Switch from compress/.Z to gzip/.gz + +------------------------------------------------------------------- Old: ---- gsm-1.0.18.tar.gz New: ---- gsm-1.0.19.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ libgsm.spec ++++++ --- /var/tmp/diff_new_pack.rItvQO/_old 2021-05-01 00:46:19.831550415 +0200 +++ /var/tmp/diff_new_pack.rItvQO/_new 2021-05-01 00:46:19.835550396 +0200 @@ -1,7 +1,7 @@ # # spec file for package libgsm # -# Copyright (c) 2019 SUSE LINUX GmbH, Nuernberg, Germany. +# Copyright (c) 2021 SUSE LLC # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,9 +17,9 @@ %define _name gsm -%define _version 1.0-pl18 +%define _version 1.0-pl19 Name: libgsm -Version: 1.0.18 +Version: 1.0.19 Release: 0 Summary: GSM 06.10 Lossy Speech Compressor Library and Utilities License: ISC ++++++ gsm-1.0.18.tar.gz -> gsm-1.0.19.tar.gz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/gsm-1.0-pl18/ChangeLog new/gsm-1.0-pl19/ChangeLog --- old/gsm-1.0-pl18/ChangeLog 2018-05-06 04:57:47.000000000 +0200 +++ new/gsm-1.0-pl19/ChangeLog 2020-03-27 22:17:44.000000000 +0100 @@ -1,3 +1,12 @@ +Fri Mar 27 15:18:06 2020 + + * Release 1.0 Patchlevel 19 + Make it easier to include gsm.h from C++ by wrapping it with macros. + Throw a #define _POSIX_C_SOURCE 200809L into toast.h to make it + possible for Linux glibc to just work. + (Thanks to enh(a)google.com for the suggestion; errors are mine.) + Switch from compress/.Z to gzip/.gz + Sat May 5 21:48:20 2018 * Release 1.0 Patchlevel 18 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/gsm-1.0-pl18/Makefile new/gsm-1.0-pl19/Makefile --- old/gsm-1.0-pl18/Makefile 2018-05-06 04:07:28.000000000 +0200 +++ new/gsm-1.0-pl19/Makefile 2020-03-27 22:17:15.000000000 +0100 @@ -102,7 +102,7 @@ ARFLAGS = cr RMFLAGS = FIND = find -COMPRESS = compress +COMPRESS = gzip COMPRESSFLAGS = # RANLIB = true RANLIB = ranlib @@ -401,14 +401,14 @@ # Distribution -dist: gsm-1.0.tar.Z +dist: gsm-1.0.tar.gz @echo dist: Done. -gsm-1.0.tar.Z: $(STUFF) $(SOURCES) $(HEADERS) $(MANUALS) +gsm-1.0.tar.gz: $(STUFF) $(SOURCES) $(HEADERS) $(MANUALS) ( cd $(ROOT)/..; \ tar cvf - `cat $(ROOT)/gsm-1.0/MANIFEST \ | sed '/^#/d'` \ - ) | $(COMPRESS) $(COMPRESSFLAGS) > $(ROOT)/gsm-1.0.tar.Z + ) | $(COMPRESS) $(COMPRESSFLAGS) > $(ROOT)/gsm-1.0.tar.gz # Clean diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/gsm-1.0-pl18/add-test/add_test.c new/gsm-1.0-pl19/add-test/add_test.c --- old/gsm-1.0-pl18/add-test/add_test.c 2018-05-06 04:53:58.000000000 +0200 +++ new/gsm-1.0-pl19/add-test/add_test.c 2020-03-27 22:13:19.000000000 +0100 @@ -6,6 +6,10 @@ /* $Header: /tmp_amd/presto/export/kbs/jutta/src/gsm/RCS/add_test.c,v 1.2 1994/05/10 20:18:17 jutta Exp $ */ +#ifndef _POSIX_C_SOURCE +#define _POSIX_C_SOURCE 200809L +#endif + #include <stdio.h> #include <stdlib.h> #include <string.h> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/gsm-1.0-pl18/inc/gsm.h new/gsm-1.0-pl19/inc/gsm.h --- old/gsm-1.0-pl18/inc/gsm.h 2018-05-06 04:53:02.000000000 +0200 +++ new/gsm-1.0-pl19/inc/gsm.h 2020-03-27 22:07:05.000000000 +0100 @@ -10,6 +10,10 @@ #define GSM_H #ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus # define NeedFunctionPrototypes 1 #endif @@ -43,7 +47,7 @@ #define GSM_MAGIC 0xD /* 13 kbit/s RPE-LTP */ -#define GSM_PATCHLEVEL 18 +#define GSM_PATCHLEVEL 19 #define GSM_MINOR 0 #define GSM_MAJOR 1 @@ -68,4 +72,8 @@ #undef GSM_P +#ifdef __cplusplus +} // extern "C" +#endif + #endif /* GSM_H */ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/gsm-1.0-pl18/inc/private.h new/gsm-1.0-pl19/inc/private.h --- old/gsm-1.0-pl18/inc/private.h 2018-05-06 04:56:33.000000000 +0200 +++ new/gsm-1.0-pl19/inc/private.h 2020-03-27 22:04:51.000000000 +0100 @@ -9,6 +9,10 @@ #ifndef PRIVATE_H #define PRIVATE_H +#ifdef __cplusplus + extern "C" { +#endif + typedef short word; /* 16 bit signed int */ typedef long longword; /* 32 bit signed int */ @@ -266,4 +270,8 @@ #include "unproto.h" +#ifdef __cplusplus + } // extern "C" +#endif + #endif /* PRIVATE_H */ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/gsm-1.0-pl18/inc/toast.h new/gsm-1.0-pl19/inc/toast.h --- old/gsm-1.0-pl18/inc/toast.h 2018-05-06 04:07:28.000000000 +0200 +++ new/gsm-1.0-pl19/inc/toast.h 2020-03-27 22:08:19.000000000 +0100 @@ -11,6 +11,10 @@ #include "config.h" +#ifndef _POSIX_C_SOURCE +#define _POSIX_C_SOURCE 200809L +#endif + #include <sys/types.h> #include <sys/stat.h>

1 0

commit libyui for openSUSE:Factory
by Source-Sync 30 Apr '21

30 Apr '21

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package libyui for openSUSE:Factory checked in at 2021-05-01 00:46:14 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/libyui (Old) and /work/SRC/openSUSE:Factory/.libyui.new.1947 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "libyui" Sat May 1 00:46:14 2021 rev:61 rq:889279 version:4.2.8 Changes: -------- --- /work/SRC/openSUSE:Factory/libyui/libyui.changes 2021-04-23 17:50:45.718808238 +0200 +++ /work/SRC/openSUSE:Factory/.libyui.new.1947/libyui.changes 2021-05-01 00:46:17.463560963 +0200 @@ -1,0 +2,24 @@ +Thu Apr 29 11:11:56 UTC 2021 - Stefan Hundhammer <shundhammer(a)suse.com> + +- Fixed license headers to use the correct license (LGPL) everywhere + (bsc#1185443) +- 4.2.8 + +------------------------------------------------------------------- +Mon Apr 26 14:12:06 UTC 2021 - Stefan Hundhammer <shundhammer(a)suse.com> + +- Auto-publish C++ API docs (libyui base lib doxygen autodocs) + as GitHub pages when a PR to master is merged + (part of bsc#1181653) + Doc URL: https://libyui.github.io/libyui/api-doc/index.html +- 4.2.7 + +------------------------------------------------------------------- +Mon Apr 26 10:57:55 UTC 2021 - Stefan Hundhammer <shundhammer(a)suse.com> + +- Moved CI scripts into new subdir scripts/ to unclutter toplevel dir + (part of bsc#1181653) +- Renamed ambiguously named script local.sh to local-prefix.sh +- 4.2.6 + +------------------------------------------------------------------- Old: ---- libyui-4.2.5.tar.bz2 New: ---- libyui-4.2.8.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ libyui-bindings.spec ++++++ --- /var/tmp/diff_new_pack.Ie5Dsz/_old 2021-05-01 00:46:18.127558005 +0200 +++ /var/tmp/diff_new_pack.Ie5Dsz/_new 2021-05-01 00:46:18.131557988 +0200 @@ -20,7 +20,7 @@ Name: libyui-bindings # DO NOT manually bump the version here; instead, use rake version:bump -Version: 4.2.5 +Version: 4.2.8 Release: 0 Summary: Bindings for libyui License: LGPL-2.1-only OR LGPL-3.0-only ++++++ libyui-ncurses-pkg.spec ++++++ --- /var/tmp/diff_new_pack.Ie5Dsz/_old 2021-05-01 00:46:18.159557863 +0200 +++ /var/tmp/diff_new_pack.Ie5Dsz/_new 2021-05-01 00:46:18.163557845 +0200 @@ -19,7 +19,7 @@ Name: libyui-ncurses-pkg # DO NOT manually bump the version here; instead, use rake version:bump -Version: 4.2.5 +Version: 4.2.8 Release: 0 %define so_version 15 libyui-ncurses-rest-api.spec: same change libyui-ncurses.spec: same change ++++++ libyui-qt-graph.spec ++++++ --- /var/tmp/diff_new_pack.Ie5Dsz/_old 2021-05-01 00:46:18.243557488 +0200 +++ /var/tmp/diff_new_pack.Ie5Dsz/_new 2021-05-01 00:46:18.247557471 +0200 @@ -19,7 +19,7 @@ Name: libyui-qt-graph # DO NOT manually bump the version here; instead, use rake version:bump -Version: 4.2.5 +Version: 4.2.8 Release: 0 %define so_version 15 ++++++ libyui-qt-pkg.spec ++++++ --- /var/tmp/diff_new_pack.Ie5Dsz/_old 2021-05-01 00:46:18.271557364 +0200 +++ /var/tmp/diff_new_pack.Ie5Dsz/_new 2021-05-01 00:46:18.275557346 +0200 @@ -19,7 +19,7 @@ Name: libyui-qt-pkg # DO NOT manually bump the version here; instead, use rake version:bump -Version: 4.2.5 +Version: 4.2.8 Release: 0 %define so_version 15 libyui-qt-rest-api.spec: same change libyui-qt.spec: same change libyui-rest-api.spec: same change libyui.spec: same change ++++++ libyui-4.2.5.tar.bz2 -> libyui-4.2.8.tar.bz2 ++++++ ++++ 10127 lines of diff (skipped)

1 0

commit python-pyxdg for openSUSE:Factory
by Source-Sync 30 Apr '21

30 Apr '21

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package python-pyxdg for openSUSE:Factory checked in at 2021-05-01 00:46:13 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/python-pyxdg (Old) and /work/SRC/openSUSE:Factory/.python-pyxdg.new.1947 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "python-pyxdg" Sat May 1 00:46:13 2021 rev:12 rq:889231 version:0.27 Changes: -------- --- /work/SRC/openSUSE:Factory/python-pyxdg/python-pyxdg.changes 2020-12-04 21:27:25.246032946 +0100 +++ /work/SRC/openSUSE:Factory/.python-pyxdg.new.1947/python-pyxdg.changes 2021-05-01 00:46:16.283566220 +0200 @@ -1,0 +2,6 @@ +Thu Apr 29 07:22:54 UTC 2021 - Mark��ta Machov�� <mmachova(a)suse.com> + +- Obsolete python-xdg to resolve conflicting state (boo#1178803) + * see https://bbs.archlinux.org/viewtopic.php?id=262403 for a workaround + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ python-pyxdg.spec ++++++ --- /var/tmp/diff_new_pack.llYECm/_old 2021-05-01 00:46:16.847563707 +0200 +++ /var/tmp/diff_new_pack.llYECm/_new 2021-05-01 00:46:16.847563707 +0200 @@ -1,7 +1,7 @@ # # spec file for package python-pyxdg # -# Copyright (c) 2020 SUSE LLC +# Copyright (c) 2021 SUSE LLC # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -36,6 +36,7 @@ Requires: hicolor-icon-theme Requires: shared-mime-info Conflicts: python-xdg +Obsoletes: python-xdg BuildArch: noarch %python_subpackages

1 0

commit gnome-branding-MicroOS for openSUSE:Factory
by Source-Sync 30 Apr '21

30 Apr '21

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package gnome-branding-MicroOS for openSUSE:Factory checked in at 2021-05-01 00:46:12 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/gnome-branding-MicroOS (Old) and /work/SRC/openSUSE:Factory/.gnome-branding-MicroOS.new.1947 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "gnome-branding-MicroOS" Sat May 1 00:46:12 2021 rev:2 rq:889224 version:20210427 Changes: -------- --- /work/SRC/openSUSE:Factory/gnome-branding-MicroOS/gnome-branding-MicroOS.changes 2021-03-24 16:11:12.123828812 +0100 +++ /work/SRC/openSUSE:Factory/.gnome-branding-MicroOS.new.1947/gnome-branding-MicroOS.changes 2021-05-01 00:46:15.311570550 +0200 @@ -1,0 +2,12 @@ +Tue Apr 27 23:37:33 UTC 2021 - Micha�� Rostecki <mrostecki(a)suse.com> + +- Wait for Internet connectivity before proceeding with next steps. + Before this change, the mod-firstboot script was failing when: + * there was no network configured on the first boot (happens + when using NetworkManager, since it's not configured by YaST + during installation) + * the script started before wifi connection was properly + established +- 20210427 + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ gnome-branding-MicroOS.spec ++++++ --- /var/tmp/diff_new_pack.FAz9G6/_old 2021-05-01 00:46:15.899567931 +0200 +++ /var/tmp/diff_new_pack.FAz9G6/_new 2021-05-01 00:46:15.899567931 +0200 @@ -1,6 +1,7 @@ # # spec file for package gnome-branding-MicroOS # +# Copyright (c) 2021 SUSE LLC # Copyright (c) 2021 SUSE Software Solutions GmbH # # All modifications and additions to the file contributed by third parties @@ -15,6 +16,7 @@ # Please submit bugfixes or comments via https://bugs.opensuse.org/ # + Name: gnome-branding-MicroOS Summary: MicroOS Desktop default settings License: BSD-3-Clause @@ -26,12 +28,12 @@ Source3: mod-firstboot.desktop Source4: mod-firstboot BuildArch: noarch -BuildRequires: gio-branding-openSUSE BuildRequires: flatpak -Requires: sound-theme-freedesktop -Requires: gio-branding-openSUSE +BuildRequires: gio-branding-openSUSE Requires: flatpak -Version: 20210322 +Requires: gio-branding-openSUSE +Requires: sound-theme-freedesktop +Version: 20210427 Release: 0 %description ++++++ mod-firstboot ++++++ --- /var/tmp/diff_new_pack.FAz9G6/_old 2021-05-01 00:46:15.967567627 +0200 +++ /var/tmp/diff_new_pack.FAz9G6/_new 2021-05-01 00:46:15.971567610 +0200 @@ -1,5 +1,9 @@ #!/bin/sh ( +echo "# Waiting for Internet connection" +until /usr/bin/ping -q -c 1 flathub.org; do sleep 1; done +echo "20" + echo "# Adding Flathub Repository" /usr/bin/flatpak remote-add --user --if-not-exists flathub /usr/share/microos-desktop/flathub.flatpakrepo if [ "$?" != 0 ] ; then @@ -7,7 +11,7 @@ --text="Adding Flathub Repo Failed" exit 1 fi -echo "25" +echo "40" echo "# Installing Firefox" /usr/bin/flatpak install --user --noninteractive flathub org.mozilla.firefox @@ -17,7 +21,7 @@ exit 1 fi -echo "50" +echo "60" echo "# Installing Calculator" /usr/bin/flatpak install --user --noninteractive flathub org.gnome.Calculator if [ "$?" != 0 ] ; then @@ -26,7 +30,7 @@ exit 1 fi -echo "75" +echo "80" echo "# Installing gEdit" /usr/bin/flatpak install --user --noninteractive flathub org.gnome.gedit if [ "$?" != 0 ] ; then

1 0

commit evolution for openSUSE:Factory
by Source-Sync 30 Apr '21

30 Apr '21

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package evolution for openSUSE:Factory checked in at 2021-05-01 00:46:11 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/evolution (Old) and /work/SRC/openSUSE:Factory/.evolution.new.1947 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "evolution" Sat May 1 00:46:11 2021 rev:243 rq:889214 version:3.40.0 Changes: -------- --- /work/SRC/openSUSE:Factory/evolution/evolution.changes 2021-04-12 12:37:42.561393317 +0200 +++ /work/SRC/openSUSE:Factory/.evolution.new.1947/evolution.changes 2021-05-01 00:46:14.555573918 +0200 @@ -1,0 +2,5 @@ +Thu Apr 29 07:46:08 UTC 2021 - Dominique Leuenberger <dimstar(a)opensuse.org> + +- Add 7cfe4190e.patch: Fix build with cmake 3.20.1. + +------------------------------------------------------------------- New: ---- 7cfe4190e.patch ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ evolution.spec ++++++ --- /var/tmp/diff_new_pack.heJH48/_old 2021-05-01 00:46:15.039571761 +0200 +++ /var/tmp/diff_new_pack.heJH48/_new 2021-05-01 00:46:15.039571761 +0200 @@ -29,7 +29,8 @@ Group: Productivity/Networking/Email/Clients URL: https://wiki.gnome.org/Apps/Evolution/ Source0: https://download.gnome.org/sources/evolution/3.40/%{name}-%{version}.tar.xz - +# PATCH-FIX-UPSTREAM 7cfe4190e.patch dimstar(a)opensuse.org -- PrintableOptions.cmake: Correct variable name comparison, fix build with cmake 3.20.1 +Patch0: https://gitlab.gnome.org/GNOME/evolution/-/commit/7cfe4190e.patch BuildRequires: bison BuildRequires: bogofilter BuildRequires: cmake ++++++ 7cfe4190e.patch ++++++ From 7cfe4190e3e72b40472d57871459f1b136393003 Mon Sep 17 00:00:00 2001 From: Milan Crha <mcrha(a)redhat.com> Date: Wed, 14 Apr 2021 16:58:08 +0200 Subject: [PATCH] PrintableOptions.cmake: Correct variable name comparison CMake 3.20.1 errors out with: CMake Error at cmake/modules/PrintableOptions.cmake:38 (message): variable name cannot be empty Call Stack (most recent call first): CMakeLists.txt:152 (add_printable_variable) Change how the parameter value is compared, to fix it. --- cmake/modules/PrintableOptions.cmake | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/cmake/modules/PrintableOptions.cmake b/cmake/modules/PrintableOptions.cmake index ba1c9d0b7f..339f1da4b4 100644 --- a/cmake/modules/PrintableOptions.cmake +++ b/cmake/modules/PrintableOptions.cmake @@ -19,40 +19,40 @@ # prints all the build options previously added with the above functions macro(add_printable_variable_bare _name) - if(_name STREQUAL "") + if("${_name}" STREQUAL "") message(FATAL_ERROR "variable name cannot be empty") - endif(_name STREQUAL "") + endif("${_name}" STREQUAL "") list(APPEND _printable_options ${_name}) endmacro() macro(add_printable_option _name _description _default_value) - if(_name STREQUAL "") + if("${_name}" STREQUAL "") message(FATAL_ERROR "option name cannot be empty") - endif(_name STREQUAL "") + endif("${_name}" STREQUAL "") option(${_name} ${_description} ${_default_value}) add_printable_variable_bare(${_name}) endmacro() macro(add_printable_variable _name _description _default_value) - if(_name STREQUAL "") + if("${_name}" STREQUAL "") message(FATAL_ERROR "variable name cannot be empty") - endif(_name STREQUAL "") + endif("${_name}" STREQUAL "") set(${_name} ${_default_value} CACHE STRING ${_description}) add_printable_variable_bare(${_name}) endmacro() macro(add_printable_variable_path _name _description _default_value) - if(_name STREQUAL "") + if("${_name}" STREQUAL "") message(FATAL_ERROR "path variable name cannot be empty") - endif(_name STREQUAL "") + endif("${_name}" STREQUAL "") set(${_name} ${_default_value} CACHE PATH ${_description}) add_printable_variable_bare(${_name}) endmacro() macro(add_printable_variable_filepath _name _description _default_value) - if(_name STREQUAL "") + if("${_name}" STREQUAL "") message(FATAL_ERROR "filepath variable name cannot be empty") - endif(_name STREQUAL "") + endif("${_name}" STREQUAL "") set(${_name} ${_default_value} CACHE FILEPATH ${_description}) add_printable_variable_bare(${_name}) endmacro() -- GitLab

1 0

commit virglrenderer for openSUSE:Factory
by Source-Sync 30 Apr '21

30 Apr '21

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package virglrenderer for openSUSE:Factory checked in at 2021-05-01 00:46:10 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/virglrenderer (Old) and /work/SRC/openSUSE:Factory/.virglrenderer.new.1947 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "virglrenderer" Sat May 1 00:46:10 2021 rev:13 rq:889210 version:0.9.1 Changes: -------- --- /work/SRC/openSUSE:Factory/virglrenderer/virglrenderer.changes 2021-04-10 15:26:39.758328013 +0200 +++ /work/SRC/openSUSE:Factory/.virglrenderer.new.1947/virglrenderer.changes 2021-05-01 00:46:12.647582417 +0200 @@ -1,0 +2,6 @@ +Thu Apr 29 07:31:09 UTC 2021 - Martin Pluskal <mpluskal(a)suse.com> + +- Update to version 0.9.1: + * Various small bugfixes + +------------------------------------------------------------------- Old: ---- virglrenderer-virglrenderer-0.9.0.tar.gz New: ---- virglrenderer-virglrenderer-0.9.1.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ virglrenderer.spec ++++++ --- /var/tmp/diff_new_pack.rHeFZO/_old 2021-05-01 00:46:13.087580457 +0200 +++ /var/tmp/diff_new_pack.rHeFZO/_new 2021-05-01 00:46:13.091580440 +0200 @@ -18,14 +18,13 @@ %define libname lib%{name}1 Name: virglrenderer -Version: 0.9.0 +Version: 0.9.1 Release: 0 Summary: Virgl Rendering library License: MIT Group: Development/Libraries/C and C++ URL: https://virgil3d.github.io/ Source0: https://gitlab.freedesktop.org/virgl/%{name}/-/archive/%{name}-%{version}/%… - BuildRequires: Mesa-devel BuildRequires: meson >= 0.46 BuildRequires: pkgconfig >= 0.9.0 ++++++ virglrenderer-virglrenderer-0.9.0.tar.gz -> virglrenderer-virglrenderer-0.9.1.tar.gz ++++++ ++++ 55937 lines of diff (skipped)

1 0

commit less for openSUSE:Factory
by Source-Sync 30 Apr '21

30 Apr '21

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package less for openSUSE:Factory checked in at 2021-05-01 00:46:10 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/less (Old) and /work/SRC/openSUSE:Factory/.less.new.1947 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "less" Sat May 1 00:46:10 2021 rev:61 rq:889202 version:581.2 Changes: -------- --- /work/SRC/openSUSE:Factory/less/less.changes 2021-04-27 21:34:18.119948217 +0200 +++ /work/SRC/openSUSE:Factory/.less.new.1947/less.changes 2021-05-01 00:46:11.799586195 +0200 @@ -1,0 +2,7 @@ +Thu Apr 29 07:19:56 UTC 2021 - Dirk M��ller <dmueller(a)suse.com> + +- update to 581.2: + * This fixes a bug found in less-581 where the terminal was sometimes left in + mouse-reporting mode after exiting less. + +------------------------------------------------------------------- Old: ---- less-581.sig less-581.tar.gz New: ---- less-581.2.sig less-581.2.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ less.spec ++++++ --- /var/tmp/diff_new_pack.HV4pKB/_old 2021-05-01 00:46:12.207584377 +0200 +++ /var/tmp/diff_new_pack.HV4pKB/_new 2021-05-01 00:46:12.211584359 +0200 @@ -17,19 +17,19 @@ Name: less -Version: 581 +Version: 581.2 Release: 0 Summary: Text File Browser and Pager Similar to more License: BSD-2-Clause OR GPL-3.0-or-later Group: Productivity/Text/Utilities URL: https://www.greenwoodsoftware.com/less/ -Source: http://www.greenwoodsoftware.com/less/less-%{version}.tar.gz +Source: https://www.greenwoodsoftware.com/less/less-%{version}.tar.gz Source1: README.SUSE Source2: lessopen.sh Source3: lessclose.sh Source4: lesskey.src -Source5: http://www.greenwoodsoftware.com/less/less-%{version}.sig -Source6: http://www.greenwoodsoftware.com/less/pubkey.asc#/%{name}.keyring +Source5: https://www.greenwoodsoftware.com/less/less-%{version}.sig +Source6: https://www.greenwoodsoftware.com/less/pubkey.asc#/%{name}.keyring Patch0: less-429-shell.patch Patch2: less-429-more.patch BuildRequires: automake ++++++ less-581.tar.gz -> less-581.2.tar.gz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/less-581/NEWS new/less-581.2/NEWS --- old/less-581/NEWS 2021-04-07 03:31:17.000000000 +0200 +++ new/less-581.2/NEWS 2021-04-28 17:00:07.000000000 +0200 @@ -12,7 +12,7 @@ ====================================================================== - Major changes between "less" versions 563 and 581 + Major changes between "less" versions 563 and 581.2 * Change ESC-u command to toggle, not disable, highlighting per man page. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/less-581/README new/less-581.2/README --- old/less-581/README 2021-04-07 03:31:17.000000000 +0200 +++ new/less-581.2/README 2021-04-28 17:00:07.000000000 +0200 @@ -1,7 +1,7 @@ - Less, version 581 + Less, version 581.2 - This is the distribution of less, version 581, released 06 Apr 2021. + This is the distribution of less, version 581.2, released 28 Apr 2021. This program is part of the GNU project (http://www.gnu.org) This program is free software. You may redistribute it and/or diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/less-581/help.c new/less-581.2/help.c --- old/less-581/help.c 2021-04-07 03:31:14.000000000 +0200 +++ new/less-581.2/help.c 2021-04-28 17:00:04.000000000 +0200 @@ -1,4 +1,4 @@ -/* This file was generated by mkhelp.pl from less.hlp at 1:31 on 2021/4/7 */ +/* This file was generated by mkhelp.pl from less.hlp at 14:59 on 2021/4/28 */ #include "less.h" constant char helpdata[] = { '\n', diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/less-581/less.man new/less-581.2/less.man --- old/less-581/less.man 2021-04-07 03:31:20.000000000 +0200 +++ new/less-581.2/less.man 2021-04-28 17:00:10.000000000 +0200 @@ -1817,4 +1817,4 @@ - Version 581: 06 Apr 2021 LESS(1) + Version 581.2: 28 Apr 2021 LESS(1) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/less-581/less.nro new/less-581.2/less.nro --- old/less-581/less.nro 2021-04-07 03:31:19.000000000 +0200 +++ new/less-581.2/less.nro 2021-04-28 17:00:10.000000000 +0200 @@ -1,5 +1,5 @@ '\" t -.TH LESS 1 "Version 581: 06 Apr 2021" +.TH LESS 1 "Version 581.2: 28 Apr 2021" .SH NAME less \- opposite of more .SH SYNOPSIS diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/less-581/lessecho.man new/less-581.2/lessecho.man --- old/less-581/lessecho.man 2021-04-07 03:31:20.000000000 +0200 +++ new/less-581.2/lessecho.man 2021-04-28 17:00:10.000000000 +0200 @@ -51,4 +51,4 @@ - Version 581: 06 Apr 2021 LESSECHO(1) + Version 581.2: 28 Apr 2021 LESSECHO(1) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/less-581/lessecho.nro new/less-581.2/lessecho.nro --- old/less-581/lessecho.nro 2021-04-07 03:31:20.000000000 +0200 +++ new/less-581.2/lessecho.nro 2021-04-28 17:00:10.000000000 +0200 @@ -1,4 +1,4 @@ -.TH LESSECHO 1 "Version 581: 06 Apr 2021" +.TH LESSECHO 1 "Version 581.2: 28 Apr 2021" .SH NAME lessecho \- expand metacharacters .SH SYNOPSIS diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/less-581/lesskey.man new/less-581.2/lesskey.man --- old/less-581/lesskey.man 2021-04-07 03:31:20.000000000 +0200 +++ new/less-581.2/lesskey.man 2021-04-28 17:00:10.000000000 +0200 @@ -358,4 +358,4 @@ - Version 581: 06 Apr 2021 LESSKEY(1) + Version 581.2: 28 Apr 2021 LESSKEY(1) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/less-581/lesskey.nro new/less-581.2/lesskey.nro --- old/less-581/lesskey.nro 2021-04-07 03:31:20.000000000 +0200 +++ new/less-581.2/lesskey.nro 2021-04-28 17:00:10.000000000 +0200 @@ -1,5 +1,5 @@ '\" t -.TH LESSKEY 1 "Version 581: 06 Apr 2021" +.TH LESSKEY 1 "Version 581.2: 28 Apr 2021" .SH NAME lesskey \- specify key bindings for less .SH SYNOPSIS diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/less-581/screen.c new/less-581.2/screen.c --- old/less-581/screen.c 2021-04-07 03:31:12.000000000 +0200 +++ new/less-581.2/screen.c 2021-04-28 17:00:03.000000000 +0200 @@ -1673,8 +1673,6 @@ public void init_mouse(VOID_PARAM) { - if (!mousecap) - return; #if !MSDOS_COMPILER ltputs(sc_s_mousecap, sc_height, putchr); #else @@ -1693,8 +1691,6 @@ public void deinit_mouse(VOID_PARAM) { - if (!mousecap) - return; #if !MSDOS_COMPILER ltputs(sc_e_mousecap, sc_height, putchr); #else @@ -1718,7 +1714,8 @@ ltputs(sc_init, sc_height, putchr); if (!no_keypad) ltputs(sc_s_keypad, sc_height, putchr); - init_mouse(); + if (mousecap) + init_mouse(); } init_done = 1; if (top_scroll) @@ -1741,7 +1738,8 @@ { if (!no_init) win32_init_term(); - init_mouse(); + if (mousecap) + init_mouse(); } win32_init_vt_term(); @@ -1763,7 +1761,8 @@ #if !MSDOS_COMPILER if (!(quit_if_one_screen && one_screen)) { - deinit_mouse(); + if (mousecap) + deinit_mouse(); if (!no_keypad) ltputs(sc_e_keypad, sc_height, putchr); if (!no_init) @@ -1776,7 +1775,8 @@ win32_deinit_vt_term(); if (!(quit_if_one_screen && one_screen)) { - deinit_mouse(); + if (mousecap) + deinit_mouse(); if (!no_init) win32_deinit_term(); } diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/less-581/version.c new/less-581.2/version.c --- old/less-581/version.c 2021-04-07 03:31:16.000000000 +0200 +++ new/less-581.2/version.c 2021-04-28 17:00:06.000000000 +0200 @@ -919,6 +919,7 @@ v579 2/14/21 Fix double-width char bugs and non-match search crash. v580 3/2/21 Some color fixes; fix compiler warnings; some lesstest support. v581 4/6/21 Ignore SIGTSTP in secure mode; don't print "skipping" when filtering. +v581.2 4/28/21 Fix failure to deinit mouse. */ -char version[] = "581"; +char version[] = "581.2";

1 0