April 2016 - openSUSE Commits - openSUSE Mailing Lists

commit librevenge for openSUSE:Factory
by root＠hilbert.suse.de 30 Apr '16

30 Apr '16

Hello community, here is the log from the commit of package librevenge for openSUSE:Factory checked in at 2016-04-30 23:24:59 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/librevenge (Old) and /work/SRC/openSUSE:Factory/.librevenge.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "librevenge" Changes: -------- --- /work/SRC/openSUSE:Factory/librevenge/librevenge.changes 2016-01-13 22:44:37.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.librevenge.new/librevenge.changes 2016-04-30 23:25:01.000000000 +0200 @@ -1,0 +2,8 @@ +Fri Apr 15 07:54:39 UTC 2016 - dimstar(a)opensuse.org + +- Do not BuildRequire gdb: there is no need to be ordered behind + gdb in the build tree. Configure does check for the presence of + the gdb binary, but the detected value is not used in the entire + source tree. + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ librevenge.spec ++++++ --- /var/tmp/diff_new_pack.cCvFqJ/_old 2016-04-30 23:25:01.000000000 +0200 +++ /var/tmp/diff_new_pack.cCvFqJ/_new 2016-04-30 23:25:01.000000000 +0200 @@ -30,7 +30,6 @@ BuildRequires: doxygen BuildRequires: fdupes BuildRequires: gcc-c++ -BuildRequires: gdb BuildRequires: pkg-config BuildRequires: xz BuildRequires: pkgconfig(cppunit)

1 0

commit bind for openSUSE:Factory
by root＠hilbert.suse.de 30 Apr '16

30 Apr '16

Hello community, here is the log from the commit of package bind for openSUSE:Factory checked in at 2016-04-30 23:24:51 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/bind (Old) and /work/SRC/openSUSE:Factory/.bind.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "bind" Changes: -------- --- /work/SRC/openSUSE:Factory/bind/bind.changes 2016-03-18 21:33:30.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.bind.new/bind.changes 2016-04-30 23:24:53.000000000 +0200 @@ -1,0 +2,6 @@ +Thu Apr 14 09:56:18 UTC 2016 - lnussel(a)suse.de + +- remove BuildRequire libcap. That is only a legacy library, not + actually used for building. libcap-devel pulls in the right one. + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ bind.spec ++++++ --- /var/tmp/diff_new_pack.XwvWUl/_old 2016-04-30 23:24:54.000000000 +0200 +++ /var/tmp/diff_new_pack.XwvWUl/_new 2016-04-30 23:24:54.000000000 +0200 @@ -46,7 +46,6 @@ Patch101: runidn.diff Patch102: idnkit-powerpc-ltconfig.patch BuildRequires: krb5-devel -BuildRequires: libcap BuildRequires: libcap-devel BuildRequires: libmysqlclient-devel BuildRequires: libtool

1 0

commit libmicrohttpd for openSUSE:Factory
by root＠hilbert.suse.de 30 Apr '16

30 Apr '16

Hello community, here is the log from the commit of package libmicrohttpd for openSUSE:Factory checked in at 2016-04-30 23:24:43 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/libmicrohttpd (Old) and /work/SRC/openSUSE:Factory/.libmicrohttpd.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "libmicrohttpd" Changes: -------- --- /work/SRC/openSUSE:Factory/libmicrohttpd/libmicrohttpd.changes 2015-12-23 08:48:42.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.libmicrohttpd.new/libmicrohttpd.changes 2016-04-30 23:24:45.000000000 +0200 @@ -1,0 +2,9 @@ +Thu Apr 14 18:10:40 UTC 2016 - mpluskal(a)suse.com + +- Update to 0.9.49 + * See provided Changelog for details +- Fix typo in previous changelog entry +- Refresh patches +- Use pkgconfig style dependencies + +------------------------------------------------------------------- @@ -4 +13 @@ -- Update to 0.9.4 +- Update to 0.9.48 Old: ---- libmicrohttpd-0.9.48.tar.gz libmicrohttpd-0.9.48.tar.gz.sig New: ---- libmicrohttpd-0.9.49.tar.gz libmicrohttpd-0.9.49.tar.gz.sig ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ libmicrohttpd.spec ++++++ --- /var/tmp/diff_new_pack.dmS5YQ/_old 2016-04-30 23:24:46.000000000 +0200 +++ /var/tmp/diff_new_pack.dmS5YQ/_new 2016-04-30 23:24:46.000000000 +0200 @@ -1,7 +1,7 @@ # # spec file for package libmicrohttpd # -# Copyright (c) 2015 SUSE LINUX GmbH, Nuernberg, Germany. +# Copyright (c) 2016 SUSE LINUX GmbH, Nuernberg, Germany. # Copyright (c) 2010,2011,2012 Stephan Kleine # # All modifications and additions to the file contributed by third parties @@ -19,7 +19,7 @@ %global libmicrohttpd libmicrohttpd12 Name: libmicrohttpd -Version: 0.9.48 +Version: 0.9.49 Release: 0 Summary: Small Embeddable HTTP Server Library License: LGPL-2.1+ @@ -33,15 +33,15 @@ Patch2: libmicrohttpd_test_data.patch BuildRequires: curl BuildRequires: file-devel -BuildRequires: libcurl-devel BuildRequires: libgcrypt-devel >= 1.2.4 -BuildRequires: libgnutls-devel -BuildRequires: libtasn1-devel BuildRequires: libtool BuildRequires: makeinfo BuildRequires: openssl-devel BuildRequires: pkg-config BuildRequires: socat +BuildRequires: pkgconfig(gnutls) +BuildRequires: pkgconfig(libcurl) +BuildRequires: pkgconfig(libtasn1) BuildRoot: %{_tmppath}/%{name}-%{version}-build %description @@ -72,7 +72,7 @@ %package -n %{libmicrohttpd} Summary: Small embeddable http server library -Group: System/libraries +Group: System/Libraries %description -n %{libmicrohttpd} Shared library for %{name} (%{summary}). @@ -81,7 +81,8 @@ Summary: Small Embeddable HTTP Server Library Group: Development/Libraries/C and C++ Requires: %{libmicrohttpd} = %{version} -Requires: libgnutls-devel +Requires: pkg-config +Requires: pkgconfig(gnutls) Requires(post): info Requires(preun): info @@ -91,8 +92,8 @@ %prep %setup -q -%patch1 -p1 -%patch2 -p1 +%patch1 +%patch2 %build %configure \ @@ -108,7 +109,7 @@ make %{?_smp_mflags} %install -make DESTDIR=%{buildroot} install %{?_smp_mflags} +make %{?_smp_mflags} DESTDIR=%{buildroot} install find %{buildroot} -type f -name "*.la" -delete -print %check @@ -116,7 +117,6 @@ make -j 1 check %post -n %{libmicrohttpd} -p /sbin/ldconfig - %postun -n %{libmicrohttpd} -p /sbin/ldconfig %post devel @@ -137,7 +137,7 @@ %{_includedir}/microhttpd.h %{_libdir}/%{name}.so %{_libdir}/pkgconfig/%{name}.pc -%{_infodir}/%{name}*.info* -%{_mandir}/man3/%{name}.3* +%{_infodir}/%{name}*.info%{ext_info} +%{_mandir}/man3/%{name}.3%{ext_man} %changelog ++++++ disable-stalling-test.patch ++++++ --- /var/tmp/diff_new_pack.dmS5YQ/_old 2016-04-30 23:24:46.000000000 +0200 +++ /var/tmp/diff_new_pack.dmS5YQ/_new 2016-04-30 23:24:46.000000000 +0200 @@ -1,7 +1,7 @@ -Index: libmicrohttpd-0.9.48/src/testcurl/test_start_stop.c +Index: src/testcurl/test_start_stop.c =================================================================== ---- libmicrohttpd-0.9.48.orig/src/testcurl/test_start_stop.c -+++ libmicrohttpd-0.9.48/src/testcurl/test_start_stop.c +--- src/testcurl/test_start_stop.c.orig ++++ src/testcurl/test_start_stop.c @@ -108,21 +108,6 @@ main (int argc, char *const *argv) { unsigned int errorCount = 0; ++++++ libmicrohttpd-0.9.48.tar.gz -> libmicrohttpd-0.9.49.tar.gz ++++++ ++++ 8377 lines of diff (skipped) ++++++ libmicrohttpd_test_data.patch ++++++ --- /var/tmp/diff_new_pack.dmS5YQ/_old 2016-04-30 23:24:46.000000000 +0200 +++ /var/tmp/diff_new_pack.dmS5YQ/_new 2016-04-30 23:24:46.000000000 +0200 @@ -1,7 +1,7 @@ -Index: libmicrohttpd-0.9.48/src/testcurl/https/test_https_sni.c +Index: src/testcurl/https/test_https_sni.c =================================================================== ---- libmicrohttpd-0.9.48.orig/src/testcurl/https/test_https_sni.c -+++ libmicrohttpd-0.9.48/src/testcurl/https/test_https_sni.c +--- src/testcurl/https/test_https_sni.c.orig ++++ src/testcurl/https/test_https_sni.c @@ -186,7 +186,7 @@ do_get (const char *url) size_t len; struct curl_slist *dns_info; @@ -20,10 +20,10 @@ { fprintf (stderr, "Error: local file & received file differ.\n"); free (cbc.buf); -Index: libmicrohttpd-0.9.48/src/testcurl/https/tls_test_common.c +Index: src/testcurl/https/tls_test_common.c =================================================================== ---- libmicrohttpd-0.9.48.orig/src/testcurl/https/tls_test_common.c -+++ libmicrohttpd-0.9.48/src/testcurl/https/tls_test_common.c +--- src/testcurl/https/tls_test_common.c.orig ++++ src/testcurl/https/tls_test_common.c @@ -74,7 +74,7 @@ test_daemon_get (void *cls, char url[255]; size_t len; @@ -74,10 +74,10 @@ len) != 0) ) { fprintf (stderr, "Error: local file & received file differ.\n"); -Index: libmicrohttpd-0.9.48/src/testcurl/https/tls_test_common.h +Index: src/testcurl/https/tls_test_common.h =================================================================== ---- libmicrohttpd-0.9.48.orig/src/testcurl/https/tls_test_common.h -+++ libmicrohttpd-0.9.48/src/testcurl/https/tls_test_common.h +--- src/testcurl/https/tls_test_common.h.orig ++++ src/testcurl/https/tls_test_common.h @@ -34,7 +34,7 @@ #define DEAMON_TEST_PORT 4233

1 0

commit ImageMagick for openSUSE:Factory
by root＠hilbert.suse.de 30 Apr '16

30 Apr '16

Hello community, here is the log from the commit of package ImageMagick for openSUSE:Factory checked in at 2016-04-30 23:24:30 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/ImageMagick (Old) and /work/SRC/openSUSE:Factory/.ImageMagick.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "ImageMagick" Changes: -------- --- /work/SRC/openSUSE:Factory/ImageMagick/ImageMagick.changes 2016-01-08 15:22:23.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.ImageMagick.new/ImageMagick.changes 2016-04-30 23:24:32.000000000 +0200 @@ -1,0 +2,11 @@ +Thu Apr 14 14:30:54 UTC 2016 - pgajdos(a)suse.com + +- Update to 6.9.3-8: + * Respect gravity when rendering text (e.g. convert -gravity center + my.txt). + * Return empty string for %d property and no directory. + * Return filename for the %i property. + * Fixed lost pixels in frequency space. + * etc. see ChangeLog + +------------------------------------------------------------------- Old: ---- ImageMagick-6.9.3-0.tar.xz ImageMagick-6.9.3-0.tar.xz.asc New: ---- ImageMagick-6.9.3-8.tar.xz ImageMagick-6.9.3-8.tar.xz.asc ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ ImageMagick.spec ++++++ --- /var/tmp/diff_new_pack.KZi19M/_old 2016-04-30 23:24:33.000000000 +0200 +++ /var/tmp/diff_new_pack.KZi19M/_new 2016-04-30 23:24:33.000000000 +0200 @@ -63,7 +63,7 @@ %define maj 6 %define mfr_version %{maj}.9.3 -%define mfr_revision 0 +%define mfr_revision 8 %define quantum_depth 16 %define source_version %{mfr_version}-%{mfr_revision} %define clibver 2 ++++++ ImageMagick-6.7.6.1-no-dist-lzip.patch ++++++ --- /var/tmp/diff_new_pack.KZi19M/_old 2016-04-30 23:24:33.000000000 +0200 +++ /var/tmp/diff_new_pack.KZi19M/_new 2016-04-30 23:24:33.000000000 +0200 @@ -1,13 +1,13 @@ Index: configure.ac =================================================================== ---- configure.ac.orig 2015-01-16 14:05:25.789759058 +0100 -+++ configure.ac 2015-01-16 14:06:22.867489168 +0100 -@@ -44,7 +44,7 @@ +--- configure.ac.orig 2016-04-14 16:11:00.551271813 +0200 ++++ configure.ac 2016-04-14 16:12:17.951272238 +0200 +@@ -49,7 +49,7 @@ AX_PREFIX_CONFIG_H([magick/magick-baseconfig.h],[MagickCore]) AC_CANONICAL_SYSTEM AC_CANONICAL_TARGET --AM_INIT_AUTOMAKE([1.12 nostdinc color-tests foreign parallel-tests silent-rules subdir-objects dist-bzip2 dist-lzip dist-xz dist-zip]) -+AM_INIT_AUTOMAKE([1.12 nostdinc color-tests foreign parallel-tests silent-rules subdir-objects dist-bzip2 dist-xz dist-zip]) - m4_ifdef([AM_SILENT_RULES],[AM_SILENT_RULES([yes])]) +-AM_INIT_AUTOMAKE([foreign color-tests -Wall -Wno-portability subdir-objects dist-bzip2 dist-lzip dist-xz dist-zip tar-ustar]) ++AM_INIT_AUTOMAKE([foreign color-tests -Wall -Wno-portability subdir-objects dist-bzip2 dist-xz dist-zip tar-ustar]) + AM_SILENT_RULES([yes]) # ++++++ ImageMagick-6.9.3-0.tar.xz -> ImageMagick-6.9.3-8.tar.xz ++++++ /work/SRC/openSUSE:Factory/ImageMagick/ImageMagick-6.9.3-0.tar.xz /work/SRC/openSUSE:Factory/.ImageMagick.new/ImageMagick-6.9.3-8.tar.xz differ: char 27, line 1

1 0

commit libcap1 for openSUSE:Factory
by root＠hilbert.suse.de 30 Apr '16

30 Apr '16

Hello community, here is the log from the commit of package libcap1 for openSUSE:Factory checked in at 2016-04-30 23:24:17 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/libcap1 (Old) and /work/SRC/openSUSE:Factory/.libcap1.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "libcap1" Changes: -------- --- /work/SRC/openSUSE:Factory/libcap1/libcap1.changes 2014-10-05 20:27:26.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.libcap1.new/libcap1.changes 2016-04-30 23:24:18.000000000 +0200 @@ -1,0 +2,6 @@ +Thu Apr 14 09:59:26 UTC 2016 - lnussel(a)suse.de + +- Don't provide libcap as that leads to confusion with the libcap + package that is actually libcap2 + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ libcap1.spec ++++++ --- /var/tmp/diff_new_pack.D5FA5B/_old 2016-04-30 23:24:19.000000000 +0200 +++ /var/tmp/diff_new_pack.D5FA5B/_new 2016-04-30 23:24:19.000000000 +0200 @@ -1,7 +1,7 @@ # # spec file for package libcap1 # -# Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2016 SUSE LINUX GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -42,7 +42,6 @@ Obsoletes: libcap-64bit %endif # -Provides: libcap = %{version} # 10.2 had libcap 1.92, 10.3 had libcap 1.10 Obsoletes: libcap <= 1.92

1 0

commit powerpc-utils for openSUSE:Factory
by root＠hilbert.suse.de 30 Apr '16

30 Apr '16

Hello community, here is the log from the commit of package powerpc-utils for openSUSE:Factory checked in at 2016-04-30 23:24:09 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/powerpc-utils (Old) and /work/SRC/openSUSE:Factory/.powerpc-utils.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "powerpc-utils" Changes: -------- --- /work/SRC/openSUSE:Factory/powerpc-utils/powerpc-utils.changes 2016-04-03 23:04:18.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.powerpc-utils.new/powerpc-utils.changes 2016-04-30 23:24:10.000000000 +0200 @@ -1,0 +2,12 @@ +Thu Apr 14 11:38:50 UTC 2016 - jloeser(a)suse.com + +- version update to 1.3.1 (FATE#319933) + +- modified patches: + * ofpathname_powernv.patch + * powerpc-utils-lsprop.patch + +- removed patches: + * 0001-nvram-Correct-valid-partition-name-checking.patch + +------------------------------------------------------------------- Old: ---- 0001-nvram-Correct-valid-partition-name-checking.patch powerpc-utils-1.3.0.tar.gz New: ---- powerpc-utils-1.3.1.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ powerpc-utils.spec ++++++ --- /var/tmp/diff_new_pack.x2O2rJ/_old 2016-04-30 23:24:11.000000000 +0200 +++ /var/tmp/diff_new_pack.x2O2rJ/_new 2016-04-30 23:24:11.000000000 +0200 @@ -31,7 +31,7 @@ BuildRequires: automake BuildRequires: librtas-devel BuildRequires: zlib-devel -Version: 1.3.0 +Version: 1.3.1 Release: 0 Url: https://github.com/nfont/powerpc-utils Summary: Utilities for PowerPC Hardware @@ -43,7 +43,6 @@ Source1: nvsetenv Patch1: powerpc-utils-lsprop.patch Patch2: ofpathname_powernv.patch -Patch3: 0001-nvram-Correct-valid-partition-name-checking.patch ExclusiveArch: ppc ppc64 ppc64le %description @@ -54,7 +53,6 @@ %setup -q %patch1 -p1 %patch2 -p1 -%patch3 -p1 %build ./autogen.sh ++++++ ofpathname_powernv.patch ++++++ --- /var/tmp/diff_new_pack.x2O2rJ/_old 2016-04-30 23:24:11.000000000 +0200 +++ /var/tmp/diff_new_pack.x2O2rJ/_new 2016-04-30 23:24:11.000000000 +0200 @@ -1,8 +1,8 @@ -Index: powerpc-utils-1.2.26/scripts/ofpathname +Index: powerpc-utils-1.3.1/scripts/ofpathname =================================================================== ---- powerpc-utils-1.2.26.orig/scripts/ofpathname -+++ powerpc-utils-1.2.26/scripts/ofpathname -@@ -1473,7 +1473,7 @@ of2l_fc() +--- powerpc-utils-1.3.1.orig/scripts/ofpathname ++++ powerpc-utils-1.3.1/scripts/ofpathname +@@ -1626,7 +1626,7 @@ of2l_nvme() . $PSERIES_PLATFORM if [[ $platform = $PLATFORM_POWERNV ]]; then echo "$OFPATHNAME: is not supported on the $platform_name platform" ++++++ powerpc-utils-1.3.0.tar.gz -> powerpc-utils-1.3.1.tar.gz ++++++ ++++ 3690 lines of diff (skipped) ++++++ powerpc-utils-lsprop.patch ++++++ --- /var/tmp/diff_new_pack.x2O2rJ/_old 2016-04-30 23:24:11.000000000 +0200 +++ /var/tmp/diff_new_pack.x2O2rJ/_new 2016-04-30 23:24:11.000000000 +0200 @@ -1,8 +1,8 @@ -Index: powerpc-utils-1.2.26/src/lsprop.c +Index: powerpc-utils-1.3.1/src/lsprop.c =================================================================== ---- powerpc-utils-1.2.26.orig/src/lsprop.c -+++ powerpc-utils-1.2.26/src/lsprop.c -@@ -16,7 +16,7 @@ +--- powerpc-utils-1.3.1.orig/src/lsprop.c ++++ powerpc-utils-1.3.1/src/lsprop.c +@@ -25,7 +25,7 @@ #include <endian.h> int recurse;

1 0

commit libapr-util1 for openSUSE:Factory
by root＠hilbert.suse.de 30 Apr '16

30 Apr '16

Hello community, here is the log from the commit of package libapr-util1 for openSUSE:Factory checked in at 2016-04-30 23:23:54 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/libapr-util1 (Old) and /work/SRC/openSUSE:Factory/.libapr-util1.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "libapr-util1" Changes: -------- --- /work/SRC/openSUSE:Factory/libapr-util1/libapr-util1.changes 2016-02-17 12:14:00.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.libapr-util1.new/libapr-util1.changes 2016-04-30 23:23:55.000000000 +0200 @@ -1,0 +2,5 @@ +Thu Apr 7 09:45:00 UTC 2016 - pgajdos(a)suse.com + +- require just posgresql-devel everywhere, it seems to work now + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ libapr-util1.spec ++++++ --- /var/tmp/diff_new_pack.mmz7dV/_old 2016-04-30 23:23:56.000000000 +0200 +++ /var/tmp/diff_new_pack.mmz7dV/_new 2016-04-30 23:23:56.000000000 +0200 @@ -41,11 +41,7 @@ BuildRequires: openldap2-devel BuildRequires: openssl-devel BuildRequires: pkgconfig -%if 0%{?suse_version} == 1315 && !0%{?is_opensuse} -BuildRequires: postgresql-devel < 9.4 -%else BuildRequires: postgresql-devel >= 9.1.0 -%endif BuildRequires: sqlite-devel %requires_ge libapr1 BuildRoot: %{_tmppath}/%{name}-%{version}-build

1 0

commit argyllcms for openSUSE:Factory
by root＠hilbert.suse.de 30 Apr '16

30 Apr '16

Hello community, here is the log from the commit of package argyllcms for openSUSE:Factory checked in at 2016-04-30 23:23:36 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/argyllcms (Old) and /work/SRC/openSUSE:Factory/.argyllcms.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "argyllcms" Changes: -------- --- /work/SRC/openSUSE:Factory/argyllcms/argyllcms.changes 2015-02-27 11:09:08.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.argyllcms.new/argyllcms.changes 2016-04-30 23:23:38.000000000 +0200 @@ -1,0 +2,133 @@ +Wed Apr 13 09:40:00 UTC 2016 - lnussel(a)suse.de + +- BuildRequire systemd-rpm-macros which defines _udevrulesdir for us + +------------------------------------------------------------------- +Tue Nov 24 20:16:44 UTC 2015 - p.drouand(a)gmail.com + +- Update to version 1.8.3 + * Added SpyderCheckr24 scaning .cht and .cie files. + * Fixed USB problem with i1pro (Rev B & D ?), where communications + would occasionally break down on fast systems. + * Added another fixed display intergration time to i1pro non-adaptive + emission mode to cope with higher brightness displays. + * Added workaround for i1d3 Rev. B status code 0x83 on very low + light measurement + * Fixed minor bug in i1d3.c that truncated serial number string. + * Fixed bug in Klein K10 driver - adaptive measurement wasn't properly + using all the extra measurements. + * Improved Klein K10 driver to be more robust when lights off command + returns bogus error codes, or causes a cascade of bogus measurement + errors. + * Added workaround for OS X 10.9+ "App Nap" problem. + * Added maximum sensor frequency check for Spyder & i1d3 drivers, + so that erronious readings due to excessive brightness can't be missed. + * Changed chartread so that it doesn't warn of a possible wrong strip + being read, nor allows bi-directional strip reading, if "printtarg -r" + was used. A warning will be issued if "printtarg -r" was used, and + "chartread -B" wasn't used. + * Fixed collink for eeColor Full range RGB to use output curve + ("second" 1D curves) to compensate for cLUT being wired for 1.0 + output from 1.0 input. + * Added "lp" gamut mapping intent :- Luminance Preserving Perceptual, + for Photographers concerned with maintaining tonal variations. + * Fixed bugs in image specific gamut mapping that were degrading + the accuracy of the result. + * Re-wrote gamut smoothing code, and re-tuned it to behave similarly + to the V1.8.2 release. + * Changed default viewing condition glare to 5%, to smooth out shadow tone curve. + * Reduced the level of Helmholtz-Kohlrausch effect in CIECAM02 + implementation in the light of visual experiments. +- Changes from version 1.8.2 + * Fixed endless loop bug in alternate calibration selectors code. +- Changes from version 1.8.1 + * Fixed bug in "spec2cie -n" wrong field indexes were being used. + * Fixed colorimeter calibration selectors to add in alternate + selectors if the letters are free. +- Changes from version 1.8.0 + * Added support for the Image Engineering EX1 spectroradiometer. + * Added support for the SwatchMate Cube reflective colorimeter, + with improved accuracy. + * Added Added Television Lighting Consistency Index (EBU TLCI-2012 Qa) + to spotread and specplot output. + * Added R9 value to CRI value in spotread and specplot output. + * Added workaround for JETI specbos having been calibrated by + a 3rd party, and its calibrated range being out of sync with + its claimed range. + * Added support for "EMISINPUT" type .ti3 file. + * Build using OpenSSL rather than axTLS if it is built on Linux. + * Fixed stack space problem in OS X UI programs by expanding main + thread proxy to have 8MB instead of the default 512K. + * Updated built in libtiff to V4.0.4beta. + * Changed CGATS format to not emit unknown keyword declaration ("KEYWORD") + by default. + * Added inst_calc_cond_mask to inst.h to allow for flags in calibration + conditions. A consequence of this is that calc needs to be masked with + this when comparing against a specific condition, and the inst_calc_optional_flag + should be cleared if it is set, before callint inst->calibrate() if the + user wants to proceed with a particular calibration. + * Fixed bug with dispcal -e N + * Fixed bug in xicclu -fg and -kp + * Added dispcal -x x option to allow reading a chart and manually entering + the XYZ values. + * Fix spyder4 & 5 bug where some display types were set as refresh + when they shouldn't be. + * Fix collink "Warning :- RGB black hack trigger more than once!" + when -b is used with input video encoding (-e). + * Changed colprof so that the default ICC description is the base + filename rather than the whole file path. + * Fix technology type and display type selector "uniqueification" + bug that shows up in "ccxxmake -??". + * Add OEM field to ccmx and ccss files to mark files that have + been installed from OEM disk, so that custom ccmx & ccss files + can be given suggested selector letter priority (+ ref/CRT.ccss). + * Tweak CGATS write format to avoid scientific notation until the + numbers are bigger and smaller (i.e until e6 and e-6 are needed). +- Changes from version 1.7.0 + * Improved gamut mapping to reduce unnecessary changes to less + saturated colors such as skin tones. + * Add support for DataColor Spyder 5. + * Add support for ColorHug2 colorimeter. + * Add support for Klein K10-A colorimeter. + * Added Google ChromeCast as a test patch generator for Video displays. + * Added ls2ti3 tool to convert LightSpace .bcs files to .ti3. + * Added IRIDAS .cube 3DLut format support to collink. + * Add X3D and X3DOM support as an alternative to VRML, and make X3DOM + the default. + * Add better cross compatibility with non-Argyll ICC profiles using + ArgyllCMS 'arts' tag to mark 'wtpt' Absolute Colorimetric chromaticity + transform, as well as implement proper absolute colorimetric intent + for Display profiles use the 'chad' tag. Note that the standard + ICC profiles provided by ArgyllCMS in the ref directory (such as sRGB etc.) + now include an 'arts' tag. + * Ignore any patches that have zero values for creating Display profiles, + unless they are for device zero. + * Fix various instrument communications problems for JETI specbos, + DTP20, DTP92 & DTP94. + * Fix gestaltSystemVersion warning on OS X 10.10. + * Fix very major bug in illumread. It wasn't actually working at all + since V1.4.0. + * Added collink -I[gG][:p.p]:x.x options that allows an output offset + gamma curve be targetted instead of BT1886. + * Added dispcal and collink -b black point hack. This forces the input + zero to map to the output zero for well behaved displays, reducing + dependence on the instrument accuracy for a very dark black point. + * Added preset list of display techologies to select from in ccxxmake. + * Added a -P prune option to profcheck, that creates a .ti3 file pruned + of any patches that have a delta E fit error greater than a threshold. + This may be of use in eliminating bad reading values from a measurement set. + * Added histogram plot option -h to both profcheck and verify. + * Added a dispread & fakeread -Z option to set the number of bits to + quantize the test values to. + * Fixed bug in targen - the -V dark emphasis wasn't being applied to OFPS + generated points. + * Make sure that if an instrument display reading is interrupted by a + forced calibration, that the user is asked to place it back on the + display before resuming the measurements. +- Remove obsolete patches + * argyllcms-udev-builtin.patch + * argyllcms-udev-hwdb.patch +- Some specfile cleanups and improvements +- Update argyllcms-udev151.patch + +------------------------------------------------------------------- Old: ---- Argyll_V1.6.3_src.zip argyllcms-udev-builtin.patch argyllcms-udev-hwdb.patch New: ---- Argyll_V1.8.3_src.zip ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ argyllcms.spec ++++++ --- /var/tmp/diff_new_pack.nw0cQi/_old 2016-04-30 23:23:39.000000000 +0200 +++ /var/tmp/diff_new_pack.nw0cQi/_new 2016-04-30 23:23:39.000000000 +0200 @@ -1,7 +1,7 @@ # # spec file for package argyllcms # -# Copyright (c) 2015 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2016 SUSE LINUX GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -16,20 +16,18 @@ # -%define _udevrulesdir %(pkg-config --variable=udevdir udev)/rules.d - -%define archivename Argyll_V%{version}%{?alphaversion}_src.zip +%define tarname Argyll Name: argyllcms -Version: 1.6.3 +Version: 1.8.3 Release: 0 Summary: ICC compatible color management system License: AGPL-3.0 and GPL-2.0+ and MIT Group: System/X11/Utilities - -Url: http://www.%{name}.com/ - -Source0: %{url}%{archivename} +Url: http://www.argyllcms.com/ +# factory-auto doesn't like this +#Source0: http://www.argyllcms.com/%{tarname}_V%{version}_src.zip +Source0: %{tarname}_V%{version}_src.zip Source1: 19-color.fdi Source2: color-device-file.policy Source3: ajam-2.5.2-1.3.3.tgz @@ -38,10 +36,6 @@ Patch5: argyllcms-udev151.patch Patch7: ajam-include.patch Patch8: argyllcms-1.4.0-warnings.patch -# PATCH-FIX-UPSTREAM argyllcms-udev-builtin.patch fcrozat(a)suse.com -- usb-db is now builtin in udev -Patch9: argyllcms-udev-builtin.patch -# PATCH-FIX-UPSTREAM argyllcms-udev-hwdb.patch fcrozat(a)suse.com -- usb-db is replaced by hwdb in recent udev -Patch10: argyllcms-udev-hwdb.patch # PATCH-FIX-UPSTREAM argyllcms-decl.patch sbrabec(a)suse.cz -- Add missing headers. Patch12: argyllcms-decl.patch @@ -52,14 +46,10 @@ BuildRequires: xorg-x11-devel #needed for ajam BuildRequires: bison -BuildRoot: %{_tmppath}/%{name}-%{version}-build - +BuildRequires: systemd-rpm-macros +BuildRequires: pkgconfig(openssl) BuildRequires: pkgconfig(udev) Requires: udev -%if 0%{?suse_version} < 1120 -BuildRequires: hal -Requires: hal -%endif # FIXME: The application dlopens libcolordcompat.so, which does not # exists in openSUSE colord package. We should use Suggests # or Recommends here, and change its name in the source code @@ -94,17 +84,8 @@ This package contains the Argyll color management system documentation. %prep -%setup -q -n Argyll_V%{version} -%if 0%{?suse_version} >= 1120 +%setup -q -n %{tarname}_V%{version} %patch5 -p1 -b .udev151 -%if 0%{?suse_version} >= 1220 -%if 0%{?suse_version} >= 1310 -%patch10 -p1 -b .hwdb -%else -%patch9 -p1 -b .builtin -%endif -%endif -%endif %patch8 -p1 -b .warnings %patch12 -p1 @@ -146,23 +127,11 @@ sed -i -e 's/^CREATED .*/CREATED "$TIMESTAMP"/g' %{buildroot}%{_datadir}/color/argyll/ref/RefMediumGamut.gam -%if 0%{?suse_version} < 1120 -# Do some device permission magic -install -d -m 0755 %{buildroot}%{_datadir}/hal/fdi/policy/10osvendor/ -install -p -m 0644 %{SOURCE1} \ - %{buildroot}%{_datadir}/hal/fdi/policy/10osvendor/ - -install -d -m 0755 %{buildroot}%{_datadir}/PolicyKit/policy/ -install -p -m 0644 %{SOURCE2} \ - %{buildroot}%{_datadir}/PolicyKit/policy/ -%else install -d -m 0755 %{buildroot}%{_udevrulesdir} install -p -m 0644 usb/55-Argyll.rules \ %{buildroot}%{_udevrulesdir} -%endif - -%clean -rm -rf %{buildroot} +chmod a-x *.txt +chmod a-x doc/* %files %defattr(-,root,root,-) @@ -171,13 +140,7 @@ %{_bindir}/* %dir %{_datadir}/color %{_datadir}/color/argyll - -%if 0%{?suse_version} < 1120 -%{_datadir}/hal/fdi/policy/10osvendor/19-color.fdi -%{_datadir}/PolicyKit/policy/color-device-file.policy -%else %{_udevrulesdir}/55-Argyll.rules -%endif %files doc %defattr(-,root,root,-) ++++++ argyllcms-udev151.patch ++++++ --- /var/tmp/diff_new_pack.nw0cQi/_old 2016-04-30 23:23:39.000000000 +0200 +++ /var/tmp/diff_new_pack.nw0cQi/_new 2016-04-30 23:23:39.000000000 +0200 @@ -2,17 +2,16 @@ =================================================================== --- Argyll_V1.6.0.orig/usb/55-Argyll.rules +++ Argyll_V1.6.0/usb/55-Argyll.rules -@@ -77,13 +77,6 @@ ATTRS{idVendor}=="04d8", ATTRS{idProduct - ATTRS{idVendor}=="273f", ATTRS{idProduct}=="1001", ENV{COLOR_MEASUREMENT_DEVICE}="1" - +@@ -113,11 +113,4 @@ + # Debian has + # ...., TAG+="uaccess", TAG+="udev-acl" # Debian, but should be in 70-uaccess.rules -# Let udev-acl manage these devices, if it's available -TEST=="/var/run/ConsoleKit/database", ENV{COLOR_MEASUREMENT_DEVICE}=="*?", ENV{ACL_MANAGE}="1" - --# Otherwise, restrict access to members of the plugdev group, --# which the user may have to add to the system. --ENV{COLOR_MEASUREMENT_DEVICE}=="*?", ENV{ACL_MANAGE}!="*?", MODE="660", GROUP="plugdev" +-# Otherwise, restrict access to members of the colord group, +-# which the user may have to add to the system and add themselves to. +-ENV{COLOR_MEASUREMENT_DEVICE}=="*?", ENV{ACL_MANAGE}!="*?", MODE="660", GROUP="colord" - - # Set ID_VENDOR and ID_MODEL acording to VID and PID - TEST=="/lib/udev/usb-db", IMPORT{program}="usb-db %p" + LABEL="argyll_rules_end"

1 0

commit open-iscsi for openSUSE:Factory
by root＠hilbert.suse.de 30 Apr '16

30 Apr '16

Hello community, here is the log from the commit of package open-iscsi for openSUSE:Factory checked in at 2016-04-30 23:23:18 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/open-iscsi (Old) and /work/SRC/openSUSE:Factory/.open-iscsi.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "open-iscsi" Changes: -------- --- /work/SRC/openSUSE:Factory/open-iscsi/open-iscsi.changes 2016-01-23 01:15:47.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.open-iscsi.new/open-iscsi.changes 2016-04-30 23:23:20.000000000 +0200 @@ -1,0 +2,9 @@ +Wed Apr 13 17:06:42 UTC 2016 - lduncan(a)suse.com + +- Ported 3 changes from SLE 12 that are not upstream, but + are needed here, as there are in SLE: + * Fixed systemd start of iscsi.service (bsc#897565) + * iscsiuio: ARP table too small when switches involve + * Discovery via non-tcp transport needs IPC set. + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ open-iscsi-Factory-latest.diff.bz2 ++++++ --- /var/tmp/diff_new_pack.eWf2A4/_old 2016-04-30 23:23:21.000000000 +0200 +++ /var/tmp/diff_new_pack.eWf2A4/_new 2016-04-30 23:23:21.000000000 +0200 @@ -1480,7 +1480,7 @@ [ "$iscsiuio_pid" ] && kill -TERM $iscsiuio_pid diff --git a/etc/systemd/iscsi.service b/etc/systemd/iscsi.service new file mode 100644 -index 000000000000..0239ef6936a5 +index 000000000000..7aa655f1f32d --- /dev/null +++ b/etc/systemd/iscsi.service @@ -0,0 +1,15 @@ @@ -1492,7 +1492,7 @@ + +[Service] +Type=oneshot -+ExecStart=/sbin/iscsiadm -m node --loginall=automatic ++ExecStart=-/sbin/iscsiadm -m node --loginall=automatic +ExecStop=/sbin/iscsiadm -m node --logoutall=automatic +SuccessExitStatus=21 +RemainAfterExit=true @@ -8837,7 +8837,7 @@ + context->flags |= IPV6_FLAGS_DISABLE_DHCPV6; } diff --git a/iscsiuio/src/uip/ipv6.h b/iscsiuio/src/uip/ipv6.h -index 167f5f69383b..bc63762ebc55 100644 +index 167f5f69383b..35864377d9f3 100644 --- a/iscsiuio/src/uip/ipv6.h +++ b/iscsiuio/src/uip/ipv6.h @@ -1,5 +1,6 @@ @@ -9203,7 +9203,8 @@ + struct ipv6_addr default_router; + struct ipv6_prefix_entry *addr_list; u8_t hop_limit; - #define UIP_ARPTAB_SIZE 8 +-#define UIP_ARPTAB_SIZE 8 ++#define UIP_ARPTAB_SIZE 16 struct uip_stack *ustack; #define MAX_MCADDR_TABLE 5 @@ -11869,7 +11870,7 @@ return 0; } diff --git a/iscsiuio/src/uip/uipopt.h b/iscsiuio/src/uip/uipopt.h -index c91ec54c2876..946fce284926 100644 +index c91ec54c2876..bcc8949b8f16 100644 --- a/iscsiuio/src/uip/uipopt.h +++ b/iscsiuio/src/uip/uipopt.h @@ -53,7 +53,6 @@ @@ -11898,6 +11899,15 @@ /** * \name UDP configuration options * @{ +@@ -342,7 +341,7 @@ + #ifdef UIP_CONF_ARPTAB_SIZE + #define UIP_ARPTAB_SIZE UIP_CONF_ARPTAB_SIZE + #else +-#define UIP_ARPTAB_SIZE 8 ++#define UIP_ARPTAB_SIZE 16 + #endif + + /** @@ -356,7 +355,7 @@ /** @} */ @@ -20854,11 +20864,20 @@ echo "$RPM src rpm copied to $DESTDIR" diff --git a/rpm/open-iscsi.changes b/rpm/open-iscsi.changes -index 2e21afc6bc7b..ac5ff5f591f4 100644 +index 2e21afc6bc7b..140df4d6d0c5 100644 --- a/rpm/open-iscsi.changes +++ b/rpm/open-iscsi.changes -@@ -1,4 +1,467 @@ +@@ -1,4 +1,476 @@ ------------------------------------------------------------------- ++Wed Apr 13 17:06:42 UTC 2016 - lduncan(a)suse.com ++ ++- Ported 3 changes from SLE 12 that are not upstream, but ++ are needed here, as there are in SLE: ++ * Fixed systemd start of iscsi.service (bsc#897565) ++ * iscsiuio: ARP table too small when switches involve ++ * Discovery via non-tcp transport needs IPC set. ++ ++------------------------------------------------------------------- +Thu Jan 14 23:56:07 UTC 2016 - lduncan(a)suse.com + +- Synced with current upstream as of today, which included 29 @@ -20900,7 +20919,7 @@ + * Allow setting host params to return EAGAIN errors. + +------------------------------------------------------------------- -+Thu Jan 07 01:39:10 UTC 16 - lduncan(a)suse.com ++Thu Jan 07 01:39:10 UTC 2016 - lduncan(a)suse.com + +- Removing creation of the open-isns RPM, since it + is now created in its own package @@ -21325,7 +21344,7 @@ Fri Dec 9 15:09:01 CET 2011 - hare(a)suse.de - iscsiadm: Return correct error when login fails (bnc#715071) -@@ -40,6 +503,11 @@ Fri Nov 4 09:15:52 CET 2011 - hare(a)suse.de +@@ -40,6 +512,11 @@ Fri Nov 4 09:15:52 CET 2011 - hare(a)suse.de - Stop iscsiuio when run inside initrd (bnc#728095) ------------------------------------------------------------------- @@ -21337,7 +21356,7 @@ Mon Oct 24 09:13:19 CEST 2011 - hare(a)suse.de - Update iscsiuio to 0.7.0.14f (bnc#687392) -@@ -101,6 +569,11 @@ Tue Jun 21 15:09:46 CEST 2011 - hare(a)suse.de +@@ -101,6 +578,11 @@ Tue Jun 21 15:09:46 CEST 2011 - hare(a)suse.de - Include scripts for automated build ------------------------------------------------------------------- @@ -21349,7 +21368,7 @@ Wed Feb 2 11:32:12 CET 2011 - mweckbecker(a)suse.de - Fix the following issues: -@@ -224,6 +697,11 @@ Wed Nov 18 10:33:27 CET 2009 - hare(a)suse.de +@@ -224,6 +706,11 @@ Wed Nov 18 10:33:27 CET 2009 - hare(a)suse.de - Read initiatorname correctly from sysfs (bnc#541882) ------------------------------------------------------------------- @@ -21361,7 +21380,7 @@ Wed Aug 19 12:58:13 CEST 2009 - hare(a)suse.de - Synchronize startup settings (bnc#514273) -@@ -231,11 +709,24 @@ Wed Aug 19 12:58:13 CEST 2009 - hare(a)suse.de +@@ -231,11 +718,24 @@ Wed Aug 19 12:58:13 CEST 2009 - hare(a)suse.de - Do not use temp file in iscsi_discovery (bnc#528711) ------------------------------------------------------------------- @@ -23091,7 +23110,7 @@ log_error("Cannot start conn %d:%d (err %d)", session->id, conn->id, rc); diff --git a/usr/discoveryd.c b/usr/discoveryd.c -index de080ea2c271..f5359c741efe 100644 +index de080ea2c271..1955ce9062d6 100644 --- a/usr/discoveryd.c +++ b/usr/discoveryd.c @@ -40,11 +40,11 @@ @@ -23155,6 +23174,18 @@ isns_function_name(function)); isns_message_release(msg); continue; +@@ -1034,11 +1034,6 @@ static void __do_st_disc_and_login(struct discovery_rec *drec) + drec->u.sendtargets.reopen_max = 0; + + iface_link_ifaces(&setup_ifaces); +- /* +- * disc code assumes this is not set and wants to use +- * the userspace IO code. +- */ +- ipc = NULL; + + rc = idbm_bind_ifaces_to_nodes(discovery_sendtargets, drec, + &setup_ifaces, &rec_list); diff --git a/usr/event_poll.c b/usr/event_poll.c index f36fec162bf0..209ee0280c0a 100644 --- a/usr/event_poll.c

1 0

commit libgltf for openSUSE:Factory
by root＠hilbert.suse.de 30 Apr '16

30 Apr '16

Hello community, here is the log from the commit of package libgltf for openSUSE:Factory checked in at 2016-04-30 23:23:09 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/libgltf (Old) and /work/SRC/openSUSE:Factory/.libgltf.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "libgltf" Changes: -------- --- /work/SRC/openSUSE:Factory/libgltf/libgltf.changes 2014-09-30 19:41:59.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.libgltf.new/libgltf.changes 2016-04-30 23:23:11.000000000 +0200 @@ -1,0 +2,6 @@ +Wed Apr 13 10:45:39 UTC 2016 - fvogt(a)suse.com + +- Update to libgltf-0.0.2 (LO 4.3.3+) + libgltf-0.0.1.tar.bz2 -> libgltf-0.0.2.tar.bz2 + +------------------------------------------------------------------- Old: ---- libgltf-0.0.1.tar.bz2 New: ---- libgltf-0.0.2.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ libgltf.spec ++++++ --- /var/tmp/diff_new_pack.vNBZKM/_old 2016-04-30 23:23:12.000000000 +0200 +++ /var/tmp/diff_new_pack.vNBZKM/_new 2016-04-30 23:23:12.000000000 +0200 @@ -1,7 +1,7 @@ # # spec file for package libgltf # -# Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2016 SUSE LINUX GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -18,7 +18,7 @@ %define libname libgltf-0_0-0 Name: libgltf -Version: 0.0.1 +Version: 0.0.2 Release: 0 Summary: C++ Library for rendering OpenGL models stored in glTF format License: MPL-2.0 ++++++ libgltf-0.0.1.tar.bz2 -> libgltf-0.0.2.tar.bz2 ++++++ ++++ 12605 lines of diff (skipped)

1 0