February 2015 - openSUSE Commits - openSUSE Mailing Lists

commit python3-gunicorn for openSUSE:Factory
by root＠hilbert.suse.de 01 Feb '15

01 Feb '15

Hello community, here is the log from the commit of package python3-gunicorn for openSUSE:Factory checked in at 2015-02-01 12:30:31 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/python3-gunicorn (Old) and /work/SRC/openSUSE:Factory/.python3-gunicorn.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "python3-gunicorn" Changes: -------- --- /work/SRC/openSUSE:Factory/python3-gunicorn/python3-gunicorn.changes 2015-01-20 12:32:42.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.python3-gunicorn.new/python3-gunicorn.changes 2015-02-01 12:30:42.000000000 +0100 @@ -1,0 +2,21 @@ +Sat Jan 31 22:46:32 UTC 2015 - arun(a)gmx.de + +- update to version 19.2.0: + * optimize the sync workers when listening on a single interface + * add --sendfile settings to enable/disable sendfile. fix issue:856 + * add the selectors module to the code base. issue:886 + * add --max-requests-jitter setting to set the maximum jitter to add + to the max-requests setting. + * fix issue:899 propagate proxy_protocol_info to keep-alive requests + * fix issue:863 worker timeout: dynamic timeout has been removed + * fix: Avoid world writable file + * fix issue:941 set logconfig default to paster more trivially + * add statsd-prefix config setting: set the prefix to use when + emitting statsd metrics + * issue:832 log to console by default + * fix :issue:`908` make sure the worker can continue to accept + requests + * fix issue:867 Fix eventlet shutdown to actively shut down the + workers. + +------------------------------------------------------------------- Old: ---- gunicorn-19.1.1.tar.gz New: ---- gunicorn-19.2.0.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ python3-gunicorn.spec ++++++ --- /var/tmp/diff_new_pack.7Ax8AE/_old 2015-02-01 12:30:43.000000000 +0100 +++ /var/tmp/diff_new_pack.7Ax8AE/_new 2015-02-01 12:30:43.000000000 +0100 @@ -1,7 +1,7 @@ # # spec file for package python3-gunicorn # -# Copyright (c) 2015 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2015 SUSE LINUX GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,7 +17,7 @@ Name: python3-gunicorn -Version: 19.1.1 +Version: 19.2.0 Release: 0 Summary: WSGI HTTP Server for UNIX License: MIT ++++++ gunicorn-19.1.1.tar.gz -> gunicorn-19.2.0.tar.gz ++++++ ++++ 7457 lines of diff (skipped) -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit python3-pip for openSUSE:Factory
by root＠hilbert.suse.de 01 Feb '15

01 Feb '15

Hello community, here is the log from the commit of package python3-pip for openSUSE:Factory checked in at 2015-02-01 12:30:29 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/python3-pip (Old) and /work/SRC/openSUSE:Factory/.python3-pip.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "python3-pip" Changes: -------- --- /work/SRC/openSUSE:Factory/python3-pip/python3-pip.changes 2015-01-09 20:50:31.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.python3-pip.new/python3-pip.changes 2015-02-01 12:30:39.000000000 +0100 @@ -1,0 +2,17 @@ +Sat Jan 31 22:07:04 UTC 2015 - arun(a)gmx.de + +- update to version 6.0.7: + * Fix a regression where Numpy requires a build path without + symlinks to properly build. + * Fix a broken log message when running pip wheel without a + requirement. + * Don’t mask network errors while downloading the file as a hash + failure. + * Properly create the state file for the pip version check so it + only happens once a week. + * Fix an issue where switching between Python 3 and Python 2 would + evict cached items. + * Fix a regression where pip would be unable to successfully + uninstall a project without a normalized version. + +------------------------------------------------------------------- Old: ---- pip-6.0.6.tar.gz New: ---- pip-6.0.7.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ python3-pip.spec ++++++ --- /var/tmp/diff_new_pack.g2vRbk/_old 2015-02-01 12:30:40.000000000 +0100 +++ /var/tmp/diff_new_pack.g2vRbk/_new 2015-02-01 12:30:40.000000000 +0100 @@ -17,7 +17,7 @@ Name: python3-pip -Version: 6.0.6 +Version: 6.0.7 Release: 0 Url: http://www.pip-installer.org Summary: Pip installs packages. Python packages. An easy_install replacement ++++++ pip-6.0.6.tar.gz -> pip-6.0.7.tar.gz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/AUTHORS.txt new/pip-6.0.7/AUTHORS.txt --- old/pip-6.0.6/AUTHORS.txt 2015-01-03 10:32:01.000000000 +0100 +++ new/pip-6.0.7/AUTHORS.txt 2015-01-28 22:35:25.000000000 +0100 @@ -73,6 +73,7 @@ Igor Sobreira <igor(a)igorsobreira.com> Ilya Baryshev <baryshev(a)gmail.com> INADA Naoki <songofacandy(a)gmail.com> +Ionel Cristian Mărieș <contact(a)ionelmc.ro> Ionel Maries Cristian <ionel.mc(a)gmail.com> Jakub Stasiak <kuba.stasiak(a)gmail.com> Jakub Vysoky <jakub(a)borka.cz> @@ -100,6 +101,7 @@ Kevin Burke <kev(a)inburke.com> Kevin Frommelt <kevin.frommelt(a)webfilings.com> Kumar McMillan <kumar.mcmillan(a)gmail.com> +Laurent Bristiel <laurent(a)bristiel.com> Leon Sasson <leonsassonha(a)gmail.com> Lev Givon <lev(a)columbia.edu> Lincoln de Sousa <lincoln(a)comum.org> @@ -130,6 +132,7 @@ Oscar Benjamin <oscar.j.benjamin(a)gmail.com> Patrick Dubroy <pdubroy(a)gmail.com> Patrick Jenkins <patrick(a)socialgrowthtechnologies.com> +patricktokeeffe <patricktokeeffe(a)users.noreply.github.com> Paul Moore <p.f.moore(a)gmail.com> Paul Nasrat <pnasrat(a)gmail.com> Paul Oswald <pauloswald(a)gmail.com> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/CHANGES.txt new/pip-6.0.7/CHANGES.txt --- old/pip-6.0.6/CHANGES.txt 2015-01-03 10:32:01.000000000 +0100 +++ new/pip-6.0.7/CHANGES.txt 2015-01-28 22:35:25.000000000 +0100 @@ -1,3 +1,22 @@ +**6.0.7 (2015-01-28)** + +* Fix a regression where Numpy requires a build path without symlinks to + properly build. + +* Fix a broken log message when running ``pip wheel`` without a requirement. + +* Don't mask network errors while downloading the file as a hash failure. + +* Properly create the state file for the pip version check so it only happens + once a week. + +* Fix an issue where switching between Python 3 and Python 2 would evict cached + items. + +* Fix a regression where pip would be unable to successfully uninstall a + project without a normalized version. + + **6.0.6 (2015-01-03)** * Continue the regression fix from 6.0.5 which was not a complete fix. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/PKG-INFO new/pip-6.0.7/PKG-INFO --- old/pip-6.0.6/PKG-INFO 2015-01-03 10:32:20.000000000 +0100 +++ new/pip-6.0.7/PKG-INFO 2015-01-28 22:35:32.000000000 +0100 @@ -1,6 +1,6 @@ Metadata-Version: 1.1 Name: pip -Version: 6.0.6 +Version: 6.0.7 Summary: The PyPA recommended tool for installing Python packages. Home-page: https://pip.pypa.io/ Author: The pip developers diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/__init__.py new/pip-6.0.7/pip/__init__.py --- old/pip-6.0.6/pip/__init__.py 2015-01-03 10:32:01.000000000 +0100 +++ new/pip-6.0.7/pip/__init__.py 2015-01-28 22:35:25.000000000 +0100 @@ -30,7 +30,7 @@ cmdoptions = pip.cmdoptions # The version as used in the setup.py and the docs conf.py -__version__ = "6.0.6" +__version__ = "6.0.7" logger = logging.getLogger(__name__) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/_vendor/cachecontrol/__init__.py new/pip-6.0.7/pip/_vendor/cachecontrol/__init__.py --- old/pip-6.0.6/pip/_vendor/cachecontrol/__init__.py 2015-01-03 10:32:01.000000000 +0100 +++ new/pip-6.0.7/pip/_vendor/cachecontrol/__init__.py 2015-01-28 22:35:25.000000000 +0100 @@ -2,6 +2,10 @@ Make it easy to import from cachecontrol without long namespaces. """ +__author__ = 'Eric Larson' +__email__ = 'eric(a)ionrock.org' +__version__ = '0.11.1' + from .wrapper import CacheControl from .adapter import CacheControlAdapter from .controller import CacheController diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/_vendor/cachecontrol/controller.py new/pip-6.0.7/pip/_vendor/cachecontrol/controller.py --- old/pip-6.0.6/pip/_vendor/cachecontrol/controller.py 2015-01-03 10:32:01.000000000 +0100 +++ new/pip-6.0.7/pip/_vendor/cachecontrol/controller.py 2015-01-28 22:35:25.000000000 +0100 @@ -112,15 +112,19 @@ current_age = max(0, now - date) # TODO: There is an assumption that the result will be a - # urllib3 response object. This may not be best since we - # could probably avoid instantiating or constructing the - # response until we know we need it. + # urllib3 response object. This may not be best since we + # could probably avoid instantiating or constructing the + # response until we know we need it. resp_cc = self.parse_cache_control(headers) # determine freshness freshness_lifetime = 0 + + # Check the max-age pragma in the cache control header if 'max-age' in resp_cc and resp_cc['max-age'].isdigit(): freshness_lifetime = int(resp_cc['max-age']) + + # If there isn't a max-age, check for an expires header elif 'expires' in headers: expires = parsedate_tz(headers['expires']) if expires is not None: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/_vendor/cachecontrol/heuristics.py new/pip-6.0.7/pip/_vendor/cachecontrol/heuristics.py --- old/pip-6.0.6/pip/_vendor/cachecontrol/heuristics.py 2015-01-03 10:32:01.000000000 +0100 +++ new/pip-6.0.7/pip/_vendor/cachecontrol/heuristics.py 2015-01-28 22:35:25.000000000 +0100 @@ -5,11 +5,24 @@ from datetime import datetime, timedelta +def expire_after(delta, date=None): + date = date or datetime.now() + return date + delta + + +def datetime_to_header(dt): + return formatdate(calendar.timegm(dt.timetuple())) + + class BaseHeuristic(object): - def warning(self): + def warning(self, response): """ Return a valid 1xx warning header value describing the cache adjustments. + + The response is provided too allow warnings like 113 + http://tools.ietf.org/html/rfc7234#section-5.5.4 where we need + to explicitly say response is over 24 hours old. """ return '110 - "Response is Stale"' @@ -17,15 +30,15 @@ """Update the response headers with any new headers. NOTE: This SHOULD always include some Warning header to - signify that the response was cached by the client, not by way - of the provided headers. - return response. + signify that the response was cached by the client, not + by way of the provided headers. """ return {} def apply(self, response): + warning_header = {'warning': self.warning(response)} response.headers.update(self.update_headers(response)) - response.headers.update({'warning': self.warning()}) + response.headers.update(warning_header) return response @@ -39,7 +52,28 @@ if 'expires' not in response.headers: date = parsedate(response.headers['date']) - expires = datetime(*date[:6]) + timedelta(days=1) - headers['expires'] = formatdate(calendar.timegm(expires.timetuple())) - + expires = expire_after(timedelta(days=1), + date=datetime(*date[:6])) + headers['expires'] = datetime_to_header(expires) + headers['cache-control'] = 'public' return headers + + +class ExpiresAfter(BaseHeuristic): + """ + Cache **all** requests for a defined time period. + """ + + def __init__(self, **kw): + self.delta = timedelta(**kw) + + def update_headers(self, response): + expires = expire_after(self.delta) + return { + 'expires': datetime_to_header(expires), + 'cache-control': 'public', + } + + def warning(self, response): + tmpl = '110 - Automatically cached for %s. Response might be stale' + return tmpl % self.delta diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/_vendor/cachecontrol/serialize.py new/pip-6.0.7/pip/_vendor/cachecontrol/serialize.py --- old/pip-6.0.6/pip/_vendor/cachecontrol/serialize.py 2015-01-03 10:32:01.000000000 +0100 +++ new/pip-6.0.7/pip/_vendor/cachecontrol/serialize.py 2015-01-28 22:35:25.000000000 +0100 @@ -1,10 +1,29 @@ +import base64 import io +import json +import zlib from pip._vendor.requests.structures import CaseInsensitiveDict from .compat import HTTPResponse, pickle +def _b64_encode_bytes(b): + return base64.b64encode(b).decode("ascii") + + +def _b64_encode_str(s): + return _b64_encode_bytes(s.encode("utf8")) + + +def _b64_decode_bytes(b): + return base64.b64decode(b.encode("ascii")) + + +def _b64_decode_str(s): + return _b64_decode_bytes(s).decode("utf8") + + class Serializer(object): def dumps(self, request, response, body=None): @@ -12,15 +31,29 @@ if body is None: body = response.read(decode_content=False) + + # NOTE: 99% sure this is dead code. I'm only leaving it + # here b/c I don't have a test yet to prove + # it. Basically, before using + # `cachecontrol.filewrapper.CallbackFileWrapper`, + # this made an effort to reset the file handle. The + # `CallbackFileWrapper` short circuits this code by + # setting the body as the content is consumed, the + # result being a `body` argument is *always* passed + # into cache_response, and in turn, + # `Serializer.dump`. response._fp = io.BytesIO(body) data = { "response": { - "body": body, - "headers": response.headers, + "body": _b64_encode_bytes(body), + "headers": dict( + (_b64_encode_str(k), _b64_encode_str(v)) + for k, v in response.headers.items() + ), "status": response.status, "version": response.version, - "reason": response.reason, + "reason": _b64_encode_str(response.reason), "strict": response.strict, "decode_content": response.decode_content, }, @@ -34,7 +67,20 @@ header = header.strip() data["vary"][header] = request.headers.get(header, None) - return b"cc=1," + pickle.dumps(data, pickle.HIGHEST_PROTOCOL) + # Encode our Vary headers to ensure they can be serialized as JSON + data["vary"] = dict( + (_b64_encode_str(k), _b64_encode_str(v) if v is not None else v) + for k, v in data["vary"].items() + ) + + return b",".join([ + b"cc=2", + zlib.compress( + json.dumps( + data, separators=(",", ":"), sort_keys=True, + ).encode("utf8"), + ), + ]) def loads(self, request, data): # Short circuit if we've been given an empty set of data @@ -65,18 +111,10 @@ # just treat it as a miss and return None return - def _loads_v0(self, request, data): - # The original legacy cache data. This doesn't contain enough - # information to construct everything we need, so we'll treat this as - # a miss. - return - - def _loads_v1(self, request, data): - try: - cached = pickle.loads(data) - except ValueError: - return - + def prepare_response(self, request, cached): + """Verify our vary headers match and construct a real urllib3 + HTTPResponse object. + """ # Special case the '*' Vary value as it means we cannot actually # determine if the cached response is suitable for this request. if "*" in cached.get("vary", {}): @@ -94,3 +132,41 @@ preload_content=False, **cached["response"] ) + + def _loads_v0(self, request, data): + # The original legacy cache data. This doesn't contain enough + # information to construct everything we need, so we'll treat this as + # a miss. + return + + def _loads_v1(self, request, data): + try: + cached = pickle.loads(data) + except ValueError: + return + + return self.prepare_response(request, cached) + + def _loads_v2(self, request, data): + try: + cached = json.loads(zlib.decompress(data).decode("utf8")) + except ValueError: + return + + # We need to decode the items that we've base64 encoded + cached["response"]["body"] = _b64_decode_bytes( + cached["response"]["body"] + ) + cached["response"]["headers"] = dict( + (_b64_decode_str(k), _b64_decode_str(v)) + for k, v in cached["response"]["headers"].items() + ) + cached["response"]["reason"] = _b64_decode_str( + cached["response"]["reason"], + ) + cached["vary"] = dict( + (_b64_decode_str(k), _b64_decode_str(v) if v is not None else v) + for k, v in cached["vary"].items() + ) + + return self.prepare_response(request, cached) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/_vendor/colorama/__init__.py new/pip-6.0.7/pip/_vendor/colorama/__init__.py --- old/pip-6.0.6/pip/_vendor/colorama/__init__.py 2015-01-03 10:32:01.000000000 +0100 +++ new/pip-6.0.7/pip/_vendor/colorama/__init__.py 2015-01-28 22:35:25.000000000 +0100 @@ -1,7 +1,7 @@ # Copyright Jonathan Hartley 2013. BSD 3-Clause license, see LICENSE file. from .initialise import init, deinit, reinit -from .ansi import Fore, Back, Style +from .ansi import Fore, Back, Style, Cursor from .ansitowin32 import AnsiToWin32 -__version__ = '0.3.2' +__version__ = '0.3.3' diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/_vendor/colorama/ansi.py new/pip-6.0.7/pip/_vendor/colorama/ansi.py --- old/pip-6.0.6/pip/_vendor/colorama/ansi.py 2015-01-03 10:32:01.000000000 +0100 +++ new/pip-6.0.7/pip/_vendor/colorama/ansi.py 2015-01-28 22:35:25.000000000 +0100 @@ -5,10 +5,14 @@ ''' CSI = '\033[' +OSC = '\033]' +BEL = '\007' + def code_to_chars(code): return CSI + str(code) + 'm' + class AnsiCodes(object): def __init__(self, codes): for name in dir(codes): @@ -16,27 +20,72 @@ value = getattr(codes, name) setattr(self, name, code_to_chars(value)) + +class AnsiCursor(object): + def UP(self, n=1): + return CSI + str(n) + "A" + def DOWN(self, n=1): + return CSI + str(n) + "B" + def FORWARD(self, n=1): + return CSI + str(n) + "C" + def BACK(self, n=1): + return CSI + str(n) + "D" + def POS(self, x=1, y=1): + return CSI + str(y) + ";" + str(x) + "H" + +def set_title(title): + return OSC + "2;" + title + BEL + +def clear_screen(mode=2): + return CSI + str(mode) + "J" + +def clear_line(mode=2): + return CSI + str(mode) + "K" + + class AnsiFore: - BLACK = 30 - RED = 31 - GREEN = 32 - YELLOW = 33 - BLUE = 34 - MAGENTA = 35 - CYAN = 36 - WHITE = 37 - RESET = 39 + BLACK = 30 + RED = 31 + GREEN = 32 + YELLOW = 33 + BLUE = 34 + MAGENTA = 35 + CYAN = 36 + WHITE = 37 + RESET = 39 + + # These are fairly well supported, but not part of the standard. + LIGHTBLACK_EX = 90 + LIGHTRED_EX = 91 + LIGHTGREEN_EX = 92 + LIGHTYELLOW_EX = 93 + LIGHTBLUE_EX = 94 + LIGHTMAGENTA_EX = 95 + LIGHTCYAN_EX = 96 + LIGHTWHITE_EX = 97 + class AnsiBack: - BLACK = 40 - RED = 41 - GREEN = 42 - YELLOW = 43 - BLUE = 44 - MAGENTA = 45 - CYAN = 46 - WHITE = 47 - RESET = 49 + BLACK = 40 + RED = 41 + GREEN = 42 + YELLOW = 43 + BLUE = 44 + MAGENTA = 45 + CYAN = 46 + WHITE = 47 + RESET = 49 + + # These are fairly well supported, but not part of the standard. + LIGHTBLACK_EX = 100 + LIGHTRED_EX = 101 + LIGHTGREEN_EX = 102 + LIGHTYELLOW_EX = 103 + LIGHTBLUE_EX = 104 + LIGHTMAGENTA_EX = 105 + LIGHTCYAN_EX = 106 + LIGHTWHITE_EX = 107 + class AnsiStyle: BRIGHT = 1 @@ -47,4 +96,4 @@ Fore = AnsiCodes( AnsiFore ) Back = AnsiCodes( AnsiBack ) Style = AnsiCodes( AnsiStyle ) - +Cursor = AnsiCursor() diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/_vendor/colorama/ansitowin32.py new/pip-6.0.7/pip/_vendor/colorama/ansitowin32.py --- old/pip-6.0.6/pip/_vendor/colorama/ansitowin32.py 2015-01-03 10:32:01.000000000 +0100 +++ new/pip-6.0.7/pip/_vendor/colorama/ansitowin32.py 2015-01-28 22:35:25.000000000 +0100 @@ -1,6 +1,7 @@ # Copyright Jonathan Hartley 2013. BSD 3-Clause license, see LICENSE file. import re import sys +import os from .ansi import AnsiFore, AnsiBack, AnsiStyle, Style from .winterm import WinTerm, WinColor, WinStyle @@ -41,7 +42,8 @@ sequences from the text, and if outputting to a tty, will convert them into win32 function calls. ''' - ANSI_RE = re.compile('\033\[((?:\d|;)*)([a-zA-Z])') + ANSI_CSI_RE = re.compile('\033\[((?:\d|;)*)([a-zA-Z])') # Control Sequence Introducer + ANSI_OSC_RE = re.compile('\033\]((?:.|;)*?)(\x07)') # Operating System Command def __init__(self, wrapped, convert=None, strip=None, autoreset=False): # The wrapped stream (normally sys.stdout or sys.stderr) @@ -53,16 +55,17 @@ # create the proxy wrapping our output stream self.stream = StreamWrapper(wrapped, self) - on_windows = sys.platform.startswith('win') + on_windows = os.name == 'nt' + on_emulated_windows = on_windows and 'TERM' in os.environ # should we strip ANSI sequences from our output? if strip is None: - strip = on_windows + strip = on_windows and not on_emulated_windows self.strip = strip # should we should convert ANSI sequences into win32 calls? if convert is None: - convert = on_windows and not wrapped.closed and is_a_tty(wrapped) + convert = on_windows and not wrapped.closed and not on_emulated_windows and is_a_tty(wrapped) self.convert = convert # dict of ansi codes to win32 functions and parameters @@ -71,7 +74,6 @@ # are we wrapping stderr? self.on_stderr = self.wrapped is sys.stderr - def should_wrap(self): ''' True if this class is actually needed. If false, then the output @@ -82,7 +84,6 @@ ''' return self.convert or self.strip or self.autoreset - def get_win32_calls(self): if self.convert and winterm: return { @@ -99,6 +100,14 @@ AnsiFore.CYAN: (winterm.fore, WinColor.CYAN), AnsiFore.WHITE: (winterm.fore, WinColor.GREY), AnsiFore.RESET: (winterm.fore, ), + AnsiFore.LIGHTBLACK_EX: (winterm.fore, WinColor.BLACK, True), + AnsiFore.LIGHTRED_EX: (winterm.fore, WinColor.RED, True), + AnsiFore.LIGHTGREEN_EX: (winterm.fore, WinColor.GREEN, True), + AnsiFore.LIGHTYELLOW_EX: (winterm.fore, WinColor.YELLOW, True), + AnsiFore.LIGHTBLUE_EX: (winterm.fore, WinColor.BLUE, True), + AnsiFore.LIGHTMAGENTA_EX: (winterm.fore, WinColor.MAGENTA, True), + AnsiFore.LIGHTCYAN_EX: (winterm.fore, WinColor.CYAN, True), + AnsiFore.LIGHTWHITE_EX: (winterm.fore, WinColor.GREY, True), AnsiBack.BLACK: (winterm.back, WinColor.BLACK), AnsiBack.RED: (winterm.back, WinColor.RED), AnsiBack.GREEN: (winterm.back, WinColor.GREEN), @@ -108,10 +117,17 @@ AnsiBack.CYAN: (winterm.back, WinColor.CYAN), AnsiBack.WHITE: (winterm.back, WinColor.GREY), AnsiBack.RESET: (winterm.back, ), + AnsiBack.LIGHTBLACK_EX: (winterm.back, WinColor.BLACK, True), + AnsiBack.LIGHTRED_EX: (winterm.back, WinColor.RED, True), + AnsiBack.LIGHTGREEN_EX: (winterm.back, WinColor.GREEN, True), + AnsiBack.LIGHTYELLOW_EX: (winterm.back, WinColor.YELLOW, True), + AnsiBack.LIGHTBLUE_EX: (winterm.back, WinColor.BLUE, True), + AnsiBack.LIGHTMAGENTA_EX: (winterm.back, WinColor.MAGENTA, True), + AnsiBack.LIGHTCYAN_EX: (winterm.back, WinColor.CYAN, True), + AnsiBack.LIGHTWHITE_EX: (winterm.back, WinColor.GREY, True), } return dict() - def write(self, text): if self.strip or self.convert: self.write_and_convert(text) @@ -136,7 +152,8 @@ calls. ''' cursor = 0 - for match in self.ANSI_RE.finditer(text): + text = self.convert_osc(text) + for match in self.ANSI_CSI_RE.finditer(text): start, end = match.span() self.write_plain_text(text, cursor, start) self.convert_ansi(*match.groups()) @@ -152,21 +169,29 @@ def convert_ansi(self, paramstring, command): if self.convert: - params = self.extract_params(paramstring) + params = self.extract_params(command, paramstring) self.call_win32(command, params) - def extract_params(self, paramstring): - def split(paramstring): - for p in paramstring.split(';'): - if p != '': - yield int(p) - return tuple(split(paramstring)) + def extract_params(self, command, paramstring): + if command in 'Hf': + params = tuple(int(p) if len(p) != 0 else 1 for p in paramstring.split(';')) + while len(params) < 2: + # defaults: + params = params + (1,) + else: + params = tuple(int(p) for p in paramstring.split(';') if len(p) != 0) + if len(params) == 0: + # defaults: + if command in 'JKm': + params = (0,) + elif command in 'ABCD': + params = (1,) + + return params def call_win32(self, command, params): - if params == []: - params = [0] if command == 'm': for param in params: if param in self.win32_calls: @@ -175,17 +200,29 @@ args = func_args[1:] kwargs = dict(on_stderr=self.on_stderr) func(*args, **kwargs) - elif command in ('H', 'f'): # set cursor position - func = winterm.set_cursor_position - func(params, on_stderr=self.on_stderr) - elif command in ('J'): - func = winterm.erase_data - func(params, on_stderr=self.on_stderr) - elif command == 'A': - if params == () or params == None: - num_rows = 1 - else: - num_rows = params[0] - func = winterm.cursor_up - func(num_rows, on_stderr=self.on_stderr) + elif command in 'J': + winterm.erase_screen(params[0], on_stderr=self.on_stderr) + elif command in 'K': + winterm.erase_line(params[0], on_stderr=self.on_stderr) + elif command in 'Hf': # cursor position - absolute + winterm.set_cursor_position(params, on_stderr=self.on_stderr) + elif command in 'ABCD': # cursor position - relative + n = params[0] + # A - up, B - down, C - forward, D - back + x, y = {'A': (0, -n), 'B': (0, n), 'C': (n, 0), 'D': (-n, 0)}[command] + winterm.cursor_adjust(x, y, on_stderr=self.on_stderr) + + def convert_osc(self, text): + for match in self.ANSI_OSC_RE.finditer(text): + start, end = match.span() + text = text[:start] + text[end:] + paramstring, command = match.groups() + if command in '\x07': # \x07 = BEL + params = paramstring.split(";") + # 0 - change title and icon (we will only change title) + # 1 - change icon (we don't support this) + # 2 - change title + if params[0] in '02': + winterm.set_title(params[1]) + return text diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/_vendor/colorama/win32.py new/pip-6.0.7/pip/_vendor/colorama/win32.py --- old/pip-6.0.6/pip/_vendor/colorama/win32.py 2015-01-03 10:32:01.000000000 +0100 +++ new/pip-6.0.7/pip/_vendor/colorama/win32.py 2015-01-28 22:35:25.000000000 +0100 @@ -13,18 +13,18 @@ windll = None SetConsoleTextAttribute = lambda *_: None else: - from ctypes import ( - byref, Structure, c_char, c_short, c_uint32, c_ushort, POINTER - ) + from ctypes import byref, Structure, c_char, POINTER + + COORD = wintypes._COORD class CONSOLE_SCREEN_BUFFER_INFO(Structure): """struct in wincon.h.""" _fields_ = [ - ("dwSize", wintypes._COORD), - ("dwCursorPosition", wintypes._COORD), + ("dwSize", COORD), + ("dwCursorPosition", COORD), ("wAttributes", wintypes.WORD), ("srWindow", wintypes.SMALL_RECT), - ("dwMaximumWindowSize", wintypes._COORD), + ("dwMaximumWindowSize", COORD), ] def __str__(self): return '(%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d)' % ( @@ -58,7 +58,7 @@ _SetConsoleCursorPosition = windll.kernel32.SetConsoleCursorPosition _SetConsoleCursorPosition.argtypes = [ wintypes.HANDLE, - wintypes._COORD, + COORD, ] _SetConsoleCursorPosition.restype = wintypes.BOOL @@ -67,7 +67,7 @@ wintypes.HANDLE, c_char, wintypes.DWORD, - wintypes._COORD, + COORD, POINTER(wintypes.DWORD), ] _FillConsoleOutputCharacterA.restype = wintypes.BOOL @@ -77,11 +77,17 @@ wintypes.HANDLE, wintypes.WORD, wintypes.DWORD, - wintypes._COORD, + COORD, POINTER(wintypes.DWORD), ] _FillConsoleOutputAttribute.restype = wintypes.BOOL + _SetConsoleTitleW = windll.kernel32.SetConsoleTitleA + _SetConsoleTitleW.argtypes = [ + wintypes.LPCSTR + ] + _SetConsoleTitleW.restype = wintypes.BOOL + handles = { STDOUT: _GetStdHandle(STDOUT), STDERR: _GetStdHandle(STDERR), @@ -98,26 +104,27 @@ handle = handles[stream_id] return _SetConsoleTextAttribute(handle, attrs) - def SetConsoleCursorPosition(stream_id, position): - position = wintypes._COORD(*position) + def SetConsoleCursorPosition(stream_id, position, adjust=True): + position = COORD(*position) # If the position is out of range, do nothing. if position.Y <= 0 or position.X <= 0: return # Adjust for Windows' SetConsoleCursorPosition: # 1. being 0-based, while ANSI is 1-based. # 2. expecting (x,y), while ANSI uses (y,x). - adjusted_position = wintypes._COORD(position.Y - 1, position.X - 1) - # Adjust for viewport's scroll position - sr = GetConsoleScreenBufferInfo(STDOUT).srWindow - adjusted_position.Y += sr.Top - adjusted_position.X += sr.Left + adjusted_position = COORD(position.Y - 1, position.X - 1) + if adjust: + # Adjust for viewport's scroll position + sr = GetConsoleScreenBufferInfo(STDOUT).srWindow + adjusted_position.Y += sr.Top + adjusted_position.X += sr.Left # Resume normal processing handle = handles[stream_id] return _SetConsoleCursorPosition(handle, adjusted_position) def FillConsoleOutputCharacter(stream_id, char, length, start): handle = handles[stream_id] - char = c_char(char) + char = c_char(char.encode()) length = wintypes.DWORD(length) num_written = wintypes.DWORD(0) # Note that this is hard-coded for ANSI (vs wide) bytes. @@ -134,3 +141,6 @@ # Note that this is hard-coded for ANSI (vs wide) bytes. return _FillConsoleOutputAttribute( handle, attribute, length, start, byref(num_written)) + + def SetConsoleTitle(title): + return _SetConsoleTitleW(title) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/_vendor/colorama/winterm.py new/pip-6.0.7/pip/_vendor/colorama/winterm.py --- old/pip-6.0.6/pip/_vendor/colorama/winterm.py 2015-01-03 10:32:01.000000000 +0100 +++ new/pip-6.0.7/pip/_vendor/colorama/winterm.py 2015-01-28 22:35:25.000000000 +0100 @@ -15,9 +15,9 @@ # from wincon.h class WinStyle(object): - NORMAL = 0x00 # dim text, dim background - BRIGHT = 0x08 # bright text, dim background - + NORMAL = 0x00 # dim text, dim background + BRIGHT = 0x08 # bright text, dim background + BRIGHT_BACKGROUND = 0x80 # dim text, bright background class WinTerm(object): @@ -34,22 +34,26 @@ def set_attrs(self, value): self._fore = value & 7 self._back = (value >> 4) & 7 - self._style = value & WinStyle.BRIGHT + self._style = value & (WinStyle.BRIGHT | WinStyle.BRIGHT_BACKGROUND) def reset_all(self, on_stderr=None): self.set_attrs(self._default) self.set_console(attrs=self._default) - def fore(self, fore=None, on_stderr=False): + def fore(self, fore=None, light=False, on_stderr=False): if fore is None: fore = self._default_fore self._fore = fore + if light: + self._style |= WinStyle.BRIGHT self.set_console(on_stderr=on_stderr) - def back(self, back=None, on_stderr=False): + def back(self, back=None, light=False, on_stderr=False): if back is None: back = self._default_back self._back = back + if light: + self._style |= WinStyle.BRIGHT_BACKGROUND self.set_console(on_stderr=on_stderr) def style(self, style=None, on_stderr=False): @@ -73,7 +77,7 @@ position.X += 1 position.Y += 1 return position - + def set_cursor_position(self, position=None, on_stderr=False): if position is None: #I'm not currently tracking the position, so there is no default. @@ -84,37 +88,64 @@ handle = win32.STDERR win32.SetConsoleCursorPosition(handle, position) - def cursor_up(self, num_rows=0, on_stderr=False): - if num_rows == 0: - return + def cursor_adjust(self, x, y, on_stderr=False): handle = win32.STDOUT if on_stderr: handle = win32.STDERR position = self.get_position(handle) - adjusted_position = (position.Y - num_rows, position.X) - self.set_cursor_position(adjusted_position, on_stderr) + adjusted_position = (position.Y + y, position.X + x) + win32.SetConsoleCursorPosition(handle, adjusted_position, adjust=False) - def erase_data(self, mode=0, on_stderr=False): - # 0 (or None) should clear from the cursor to the end of the screen. + def erase_screen(self, mode=0, on_stderr=False): + # 0 should clear from the cursor to the end of the screen. # 1 should clear from the cursor to the beginning of the screen. - # 2 should clear the entire screen. (And maybe move cursor to (1,1)?) - # - # At the moment, I only support mode 2. From looking at the API, it - # should be possible to calculate a different number of bytes to clear, - # and to do so relative to the cursor position. - if mode[0] not in (2,): - return + # 2 should clear the entire screen, and move cursor to (1,1) handle = win32.STDOUT if on_stderr: handle = win32.STDERR - # here's where we'll home the cursor - coord_screen = win32.COORD(0,0) csbi = win32.GetConsoleScreenBufferInfo(handle) # get the number of character cells in the current buffer - dw_con_size = csbi.dwSize.X * csbi.dwSize.Y + cells_in_screen = csbi.dwSize.X * csbi.dwSize.Y + # get number of character cells before current cursor position + cells_before_cursor = csbi.dwSize.X * csbi.dwCursorPosition.Y + csbi.dwCursorPosition.X + if mode == 0: + from_coord = csbi.dwCursorPosition + cells_to_erase = cells_in_screen - cells_before_cursor + if mode == 1: + from_coord = win32.COORD(0, 0) + cells_to_erase = cells_before_cursor + elif mode == 2: + from_coord = win32.COORD(0, 0) + cells_to_erase = cells_in_screen # fill the entire screen with blanks - win32.FillConsoleOutputCharacter(handle, ' ', dw_con_size, coord_screen) + win32.FillConsoleOutputCharacter(handle, ' ', cells_to_erase, from_coord) # now set the buffer's attributes accordingly - win32.FillConsoleOutputAttribute(handle, self.get_attrs(), dw_con_size, coord_screen ); - # put the cursor at (0, 0) - win32.SetConsoleCursorPosition(handle, (coord_screen.X, coord_screen.Y)) + win32.FillConsoleOutputAttribute(handle, self.get_attrs(), cells_to_erase, from_coord) + if mode == 2: + # put the cursor where needed + win32.SetConsoleCursorPosition(handle, (1, 1)) + + def erase_line(self, mode=0, on_stderr=False): + # 0 should clear from the cursor to the end of the line. + # 1 should clear from the cursor to the beginning of the line. + # 2 should clear the entire line. + handle = win32.STDOUT + if on_stderr: + handle = win32.STDERR + csbi = win32.GetConsoleScreenBufferInfo(handle) + if mode == 0: + from_coord = csbi.dwCursorPosition + cells_to_erase = csbi.dwSize.X - csbi.dwCursorPosition.X + if mode == 1: + from_coord = win32.COORD(0, csbi.dwCursorPosition.Y) + cells_to_erase = csbi.dwCursorPosition.X + elif mode == 2: + from_coord = win32.COORD(0, csbi.dwCursorPosition.Y) + cells_to_erase = csbi.dwSize.X + # fill the entire screen with blanks + win32.FillConsoleOutputCharacter(handle, ' ', cells_to_erase, from_coord) + # now set the buffer's attributes accordingly + win32.FillConsoleOutputAttribute(handle, self.get_attrs(), cells_to_erase, from_coord) + + def set_title(self, title): + win32.SetConsoleTitle(title) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/_vendor/requests/__init__.py new/pip-6.0.7/pip/_vendor/requests/__init__.py --- old/pip-6.0.6/pip/_vendor/requests/__init__.py 2015-01-03 10:32:01.000000000 +0100 +++ new/pip-6.0.7/pip/_vendor/requests/__init__.py 2015-01-28 22:35:25.000000000 +0100 @@ -42,8 +42,8 @@ """ __title__ = 'requests' -__version__ = '2.5.0' -__build__ = 0x020500 +__version__ = '2.5.1' +__build__ = 0x020501 __author__ = 'Kenneth Reitz' __license__ = 'Apache 2.0' __copyright__ = 'Copyright 2014 Kenneth Reitz' diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/_vendor/requests/auth.py new/pip-6.0.7/pip/_vendor/requests/auth.py --- old/pip-6.0.6/pip/_vendor/requests/auth.py 2015-01-03 10:32:01.000000000 +0100 +++ new/pip-6.0.7/pip/_vendor/requests/auth.py 2015-01-28 22:35:25.000000000 +0100 @@ -67,6 +67,7 @@ self.nonce_count = 0 self.chal = {} self.pos = None + self.num_401_calls = 1 def build_digest_header(self, method, url): @@ -154,7 +155,7 @@ def handle_redirect(self, r, **kwargs): """Reset num_401_calls counter on redirects.""" if r.is_redirect: - setattr(self, 'num_401_calls', 1) + self.num_401_calls = 1 def handle_401(self, r, **kwargs): """Takes the given response and tries digest-auth, if needed.""" @@ -168,7 +169,7 @@ if 'digest' in s_auth.lower() and num_401_calls < 2: - setattr(self, 'num_401_calls', num_401_calls + 1) + self.num_401_calls += 1 pat = re.compile(r'digest ', flags=re.IGNORECASE) self.chal = parse_dict_header(pat.sub('', s_auth, count=1)) @@ -188,7 +189,7 @@ return _r - setattr(self, 'num_401_calls', num_401_calls + 1) + self.num_401_calls = 1 return r def __call__(self, r): diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/_vendor/requests/compat.py new/pip-6.0.7/pip/_vendor/requests/compat.py --- old/pip-6.0.6/pip/_vendor/requests/compat.py 2015-01-03 10:32:01.000000000 +0100 +++ new/pip-6.0.7/pip/_vendor/requests/compat.py 2015-01-28 22:35:25.000000000 +0100 @@ -76,7 +76,7 @@ try: import simplejson as json except (ImportError, SyntaxError): - # simplejson does not support Python 3.2, it thows a SyntaxError + # simplejson does not support Python 3.2, it throws a SyntaxError # because of u'...' Unicode literals. import json diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/_vendor/requests/models.py new/pip-6.0.7/pip/_vendor/requests/models.py --- old/pip-6.0.6/pip/_vendor/requests/models.py 2015-01-03 10:32:01.000000000 +0100 +++ new/pip-6.0.7/pip/_vendor/requests/models.py 2015-01-28 22:35:25.000000000 +0100 @@ -20,11 +20,10 @@ from .packages.urllib3.filepost import encode_multipart_formdata from .packages.urllib3.util import parse_url from .packages.urllib3.exceptions import ( - DecodeError, ReadTimeoutError, ProtocolError) + DecodeError, ReadTimeoutError, ProtocolError, LocationParseError) from .exceptions import ( - HTTPError, RequestException, MissingSchema, InvalidURL, - ChunkedEncodingError, ContentDecodingError, ConnectionError, - StreamConsumedError) + HTTPError, MissingSchema, InvalidURL, ChunkedEncodingError, + ContentDecodingError, ConnectionError, StreamConsumedError) from .utils import ( guess_filename, get_auth_from_url, requote_uri, stream_decode_response_unicode, to_key_val_list, parse_header_links, @@ -351,7 +350,10 @@ return # Support for unicode domain names and paths. - scheme, auth, host, port, path, query, fragment = parse_url(url) + try: + scheme, auth, host, port, path, query, fragment = parse_url(url) + except LocationParseError as e: + raise InvalidURL(*e.args) if not scheme: raise MissingSchema("Invalid URL {0!r}: No schema supplied. " @@ -615,7 +617,7 @@ def ok(self): try: self.raise_for_status() - except RequestException: + except HTTPError: return False return True diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/_vendor/requests/utils.py new/pip-6.0.7/pip/_vendor/requests/utils.py --- old/pip-6.0.6/pip/_vendor/requests/utils.py 2015-01-03 10:32:02.000000000 +0100 +++ new/pip-6.0.7/pip/_vendor/requests/utils.py 2015-01-28 22:35:25.000000000 +0100 @@ -115,7 +115,7 @@ def guess_filename(obj): """Tries to guess the filename of the given object.""" name = getattr(obj, 'name', None) - if name and name[0] != '<' and name[-1] != '>': + if name and isinstance(name, builtin_str) and name[0] != '<' and name[-1] != '>': return os.path.basename(name) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/_vendor/six.py new/pip-6.0.7/pip/_vendor/six.py --- old/pip-6.0.6/pip/_vendor/six.py 2015-01-03 10:32:02.000000000 +0100 +++ new/pip-6.0.7/pip/_vendor/six.py 2015-01-28 22:35:25.000000000 +0100 @@ -1,6 +1,6 @@ """Utilities for writing code that runs on Python 2 and 3""" -# Copyright (c) 2010-2014 Benjamin Peterson +# Copyright (c) 2010-2015 Benjamin Peterson # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to deal @@ -23,12 +23,13 @@ from __future__ import absolute_import import functools +import itertools import operator import sys import types __author__ = "Benjamin Peterson <benjamin(a)python.org>" -__version__ = "1.8.0" +__version__ = "1.9.0" # Useful for very coarse version differentiation. @@ -88,8 +89,12 @@ def __get__(self, obj, tp): result = self._resolve() setattr(obj, self.name, result) # Invokes __set__. - # This is a bit ugly, but it avoids running this again. - delattr(obj.__class__, self.name) + try: + # This is a bit ugly, but it avoids running this again by + # removing this descriptor. + delattr(obj.__class__, self.name) + except AttributeError: + pass return result @@ -554,6 +559,12 @@ def iterlists(d, **kw): return iter(d.lists(**kw)) + + viewkeys = operator.methodcaller("keys") + + viewvalues = operator.methodcaller("values") + + viewitems = operator.methodcaller("items") else: def iterkeys(d, **kw): return iter(d.iterkeys(**kw)) @@ -567,6 +578,12 @@ def iterlists(d, **kw): return iter(d.iterlists(**kw)) + viewkeys = operator.methodcaller("viewkeys") + + viewvalues = operator.methodcaller("viewvalues") + + viewitems = operator.methodcaller("viewitems") + _add_doc(iterkeys, "Return an iterator over the keys of a dictionary.") _add_doc(itervalues, "Return an iterator over the values of a dictionary.") _add_doc(iteritems, @@ -593,6 +610,9 @@ import io StringIO = io.StringIO BytesIO = io.BytesIO + _assertCountEqual = "assertCountEqual" + _assertRaisesRegex = "assertRaisesRegex" + _assertRegex = "assertRegex" else: def b(s): return s @@ -605,14 +625,28 @@ return ord(bs[0]) def indexbytes(buf, i): return ord(buf[i]) - def iterbytes(buf): - return (ord(byte) for byte in buf) + iterbytes = functools.partial(itertools.imap, ord) import StringIO StringIO = BytesIO = StringIO.StringIO + _assertCountEqual = "assertItemsEqual" + _assertRaisesRegex = "assertRaisesRegexp" + _assertRegex = "assertRegexpMatches" _add_doc(b, """Byte literal""") _add_doc(u, """Text literal""") +def assertCountEqual(self, *args, **kwargs): + return getattr(self, _assertCountEqual)(*args, **kwargs) + + +def assertRaisesRegex(self, *args, **kwargs): + return getattr(self, _assertRaisesRegex)(*args, **kwargs) + + +def assertRegex(self, *args, **kwargs): + return getattr(self, _assertRegex)(*args, **kwargs) + + if PY3: exec_ = getattr(moves.builtins, "exec") @@ -643,6 +677,21 @@ """) +if sys.version_info[:2] == (3, 2): + exec_("""def raise_from(value, from_value): + if from_value is None: + raise value + raise value from from_value +""") +elif sys.version_info[:2] > (3, 2): + exec_("""def raise_from(value, from_value): + raise value from from_value +""") +else: + def raise_from(value, from_value): + raise value + + print_ = getattr(moves.builtins, "print", None) if print_ is None: def print_(*args, **kwargs): @@ -697,6 +746,14 @@ write(sep) write(arg) write(end) +if sys.version_info[:2] < (3, 3): + _print = print_ + def print_(*args, **kwargs): + fp = kwargs.get("file", sys.stdout) + flush = kwargs.pop("flush", False) + _print(*args, **kwargs) + if flush and fp is not None: + fp.flush() _add_doc(reraise, """Reraise an exception.""") @@ -704,7 +761,7 @@ def wraps(wrapped, assigned=functools.WRAPPER_ASSIGNMENTS, updated=functools.WRAPPER_UPDATES): def wrapper(f): - f = functools.wraps(wrapped)(f) + f = functools.wraps(wrapped, assigned, updated)(f) f.__wrapped__ = wrapped return f return wrapper @@ -737,6 +794,25 @@ return metaclass(cls.__name__, cls.__bases__, orig_vars) return wrapper + +def python_2_unicode_compatible(klass): + """ + A decorator that defines __unicode__ and __str__ methods under Python 2. + Under Python 3 it does nothing. + + To support Python 2 and 3 with a single code base, define a __str__ method + returning text and apply this decorator to the class. + """ + if PY2: + if '__str__' not in klass.__dict__: + raise ValueError("@python_2_unicode_compatible cannot be applied " + "to %s because it doesn't define __str__()." % + klass.__name__) + klass.__unicode__ = klass.__str__ + klass.__str__ = lambda self: self.__unicode__().encode('utf-8') + return klass + + # Complete the moves implementation. # This code is at the end of this module to speed up module loading. # Turn this module into a package. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/_vendor/vendor.txt new/pip-6.0.7/pip/_vendor/vendor.txt --- old/pip-6.0.6/pip/_vendor/vendor.txt 2015-01-03 10:32:02.000000000 +0100 +++ new/pip-6.0.7/pip/_vendor/vendor.txt 2015-01-28 22:35:25.000000000 +0100 @@ -1,10 +1,10 @@ distlib==0.2.0 html5lib==0.999 # See: https://github.com/html5lib/html5lib-python/issues/161 -six==1.8.0 -colorama==0.3.2 -requests==2.5.0 +six==1.9.0 +colorama==0.3.3 +requests==2.5.1 certifi==14.05.14 -CacheControl==0.10.7 +CacheControl==0.11.1 lockfile==0.10.2 progress==1.2 ipaddress==1.0.7 # Only needed on 2.6, 2.7, and 3.2 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/commands/wheel.py new/pip-6.0.7/pip/commands/wheel.py --- old/pip-6.0.6/pip/commands/wheel.py 2015-01-03 10:32:02.000000000 +0100 +++ new/pip-6.0.7/pip/commands/wheel.py 2015-01-28 22:35:25.000000000 +0100 @@ -222,7 +222,7 @@ logger.error( "You must give at least one requirement to %s " "(see \"pip help %s\")", - self.name, + self.name, self.name, ) return diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/download.py new/pip-6.0.7/pip/download.py --- old/pip-6.0.6/pip/download.py 2015-01-03 10:32:02.000000000 +0100 +++ new/pip-6.0.7/pip/download.py 2015-01-28 22:35:25.000000000 +0100 @@ -549,76 +549,75 @@ show_progress = False show_url = link.show_url - try: - def resp_read(chunk_size): - try: - # Special case for urllib3. - for chunk in resp.raw.stream( - chunk_size, - # We use decode_content=False here because we do - # want urllib3 to mess with the raw bytes we get - # from the server. If we decompress inside of - # urllib3 then we cannot verify the checksum - # because the checksum will be of the compressed - # file. This breakage will only occur if the - # server adds a Content-Encoding header, which - # depends on how the server was configured: - # - Some servers will notice that the file isn't a - # compressible file and will leave the file alone - # and with an empty Content-Encoding - # - Some servers will notice that the file is - # already compressed and will leave the file - # alone and will add a Content-Encoding: gzip - # header - # - Some servers won't notice anything at all and - # will take a file that's already been compressed - # and compress it again and set the - # Content-Encoding: gzip header - # - # By setting this not to decode automatically we - # hope to eliminate problems with the second case. - decode_content=False): - yield chunk - except AttributeError: - # Standard file-like object. - while True: - chunk = resp.raw.read(chunk_size) - if not chunk: - break - yield chunk - progress_indicator = lambda x, *a, **k: x - - if link.netloc == PyPI.netloc: - url = show_url - else: - url = link.url_without_fragment - - if show_progress: # We don't show progress on cached responses - if total_length: - logger.info( - "Downloading %s (%s)", url, format_size(total_length), - ) - progress_indicator = DownloadProgressBar( - max=total_length, - ).iter - else: - logger.info("Downloading %s", url) - progress_indicator = DownloadProgressSpinner().iter - elif cached_resp: - logger.info("Using cached %s", url) + def resp_read(chunk_size): + try: + # Special case for urllib3. + for chunk in resp.raw.stream( + chunk_size, + # We use decode_content=False here because we do + # want urllib3 to mess with the raw bytes we get + # from the server. If we decompress inside of + # urllib3 then we cannot verify the checksum + # because the checksum will be of the compressed + # file. This breakage will only occur if the + # server adds a Content-Encoding header, which + # depends on how the server was configured: + # - Some servers will notice that the file isn't a + # compressible file and will leave the file alone + # and with an empty Content-Encoding + # - Some servers will notice that the file is + # already compressed and will leave the file + # alone and will add a Content-Encoding: gzip + # header + # - Some servers won't notice anything at all and + # will take a file that's already been compressed + # and compress it again and set the + # Content-Encoding: gzip header + # + # By setting this not to decode automatically we + # hope to eliminate problems with the second case. + decode_content=False): + yield chunk + except AttributeError: + # Standard file-like object. + while True: + chunk = resp.raw.read(chunk_size) + if not chunk: + break + yield chunk + + progress_indicator = lambda x, *a, **k: x + + if link.netloc == PyPI.netloc: + url = show_url + else: + url = link.url_without_fragment + + if show_progress: # We don't show progress on cached responses + if total_length: + logger.info( + "Downloading %s (%s)", url, format_size(total_length), + ) + progress_indicator = DownloadProgressBar( + max=total_length, + ).iter else: logger.info("Downloading %s", url) - - logger.debug('Downloading from URL %s', link) - - for chunk in progress_indicator(resp_read(4096), 4096): - if download_hash is not None: - download_hash.update(chunk) - content_file.write(chunk) - finally: - if link.hash and link.hash_name: - _check_hash(download_hash, link) + progress_indicator = DownloadProgressSpinner().iter + elif cached_resp: + logger.info("Using cached %s", url) + else: + logger.info("Downloading %s", url) + + logger.debug('Downloading from URL %s', link) + + for chunk in progress_indicator(resp_read(4096), 4096): + if download_hash is not None: + download_hash.update(chunk) + content_file.write(chunk) + if link.hash and link.hash_name: + _check_hash(download_hash, link) return download_hash diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/req/req_install.py new/pip-6.0.7/pip/req/req_install.py --- old/pip-6.0.6/pip/req/req_install.py 2015-01-03 10:32:02.000000000 +0100 +++ new/pip-6.0.7/pip/req/req_install.py 2015-01-28 22:35:25.000000000 +0100 @@ -557,33 +557,27 @@ dist = self.satisfied_by or self.conflicts_with paths_to_remove = UninstallPathSet(dist) - - pip_egg_info_path = os.path.join(dist.location, - dist.egg_name()) + '.egg-info' - dist_info_path = os.path.join(dist.location, - '-'.join(dist.egg_name().split('-')[:2]) - ) + '.dist-info' - # Workaround - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=618367 - debian_egg_info_path = pip_egg_info_path.replace( - '-py%s' % pkg_resources.PY_MAJOR, '') - easy_install_egg = dist.egg_name() + '.egg' develop_egg_link = egg_link_path(dist) - - pip_egg_info_exists = os.path.exists(pip_egg_info_path) - debian_egg_info_exists = os.path.exists(debian_egg_info_path) - dist_info_exists = os.path.exists(dist_info_path) - if pip_egg_info_exists or debian_egg_info_exists: - # package installed by pip - if pip_egg_info_exists: - egg_info_path = pip_egg_info_path - else: - egg_info_path = debian_egg_info_path - paths_to_remove.add(egg_info_path) + egg_info_exists = dist.egg_info and os.path.exists(dist.egg_info) + if develop_egg_link: + # develop egg + with open(develop_egg_link, 'r') as fh: + link_pointer = os.path.normcase(fh.readline().strip()) + assert (link_pointer == dist.location), ( + 'Egg-link %s does not match installed location of %s ' + '(at %s)' % (link_pointer, self.name, dist.location) + ) + paths_to_remove.add(develop_egg_link) + easy_install_pth = os.path.join(os.path.dirname(develop_egg_link), + 'easy-install.pth') + paths_to_remove.add_pth(easy_install_pth, dist.location) + elif egg_info_exists and dist.egg_info.endswith('.egg-info'): + paths_to_remove.add(dist.egg_info) if dist.has_metadata('installed-files.txt'): for installed_file in dist.get_metadata( 'installed-files.txt').splitlines(): path = os.path.normpath( - os.path.join(egg_info_path, installed_file) + os.path.join(dist.egg_info, installed_file) ) paths_to_remove.add(path) # FIXME: need a test for this elif block @@ -603,28 +597,23 @@ paths_to_remove.add(path + '.py') paths_to_remove.add(path + '.pyc') - elif dist.location.endswith(easy_install_egg): + elif dist.location.endswith('.egg'): # package installed by easy_install + # We cannot match on dist.egg_name because it can slightly vary + # i.e. setuptools-0.6c11-py2.6.egg vs setuptools-0.6rc11-py2.6.egg paths_to_remove.add(dist.location) + easy_install_egg = os.path.split(dist.location)[1] easy_install_pth = os.path.join(os.path.dirname(dist.location), 'easy-install.pth') paths_to_remove.add_pth(easy_install_pth, './' + easy_install_egg) - elif develop_egg_link: - # develop egg - with open(develop_egg_link, 'r') as fh: - link_pointer = os.path.normcase(fh.readline().strip()) - assert (link_pointer == dist.location), ( - 'Egg-link %s does not match installed location of %s ' - '(at %s)' % (link_pointer, self.name, dist.location) - ) - paths_to_remove.add(develop_egg_link) - easy_install_pth = os.path.join(os.path.dirname(develop_egg_link), - 'easy-install.pth') - paths_to_remove.add_pth(easy_install_pth, dist.location) - elif dist_info_exists: + elif egg_info_exists and dist.egg_info.endswith('.dist-info'): for path in pip.wheel.uninstallation_paths(dist): paths_to_remove.add(path) + else: + logger.debug( + 'Not sure how to uninstall: %s - Check: %s', + dist, dist.location) # find distutils scripts= scripts if dist.has_metadata('scripts') and dist.metadata_isdir('scripts'): diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/utils/build.py new/pip-6.0.7/pip/utils/build.py --- old/pip-6.0.6/pip/utils/build.py 2015-01-03 10:32:02.000000000 +0100 +++ new/pip-6.0.7/pip/utils/build.py 2015-01-28 22:35:25.000000000 +0100 @@ -1,5 +1,6 @@ from __future__ import absolute_import +import os.path import tempfile from pip.utils import rmtree @@ -14,7 +15,11 @@ delete = True if name is None: - name = tempfile.mkdtemp(prefix="pip-build-") + # We realpath here because some systems have their default tmpdir + # symlinked to another directory. This tends to confuse build + # scripts, so we canonicalize the path by traversing potential + # symlinks here. + name = os.path.realpath(tempfile.mkdtemp(prefix="pip-build-")) # If we were not given an explicit directory, and we were not given # an explicit delete option, then we'll default to deleting. if delete is None: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip/utils/outdated.py new/pip-6.0.7/pip/utils/outdated.py --- old/pip-6.0.6/pip/utils/outdated.py 2015-01-03 10:32:02.000000000 +0100 +++ new/pip-6.0.7/pip/utils/outdated.py 2015-01-28 22:35:25.000000000 +0100 @@ -73,8 +73,11 @@ # Attempt to write out our version check file with lockfile.LockFile(self.statefile_path): - with open(self.statefile_path) as statefile: - state = json.load(statefile) + if os.path.exists(self.statefile_path): + with open(self.statefile_path) as statefile: + state = json.load(statefile) + else: + state = {} state[sys.prefix] = { "last_check": current_time.strftime(SELFCHECK_DATE_FMT), diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip.egg-info/PKG-INFO new/pip-6.0.7/pip.egg-info/PKG-INFO --- old/pip-6.0.6/pip.egg-info/PKG-INFO 2015-01-03 10:32:20.000000000 +0100 +++ new/pip-6.0.7/pip.egg-info/PKG-INFO 2015-01-28 22:35:31.000000000 +0100 @@ -1,6 +1,6 @@ Metadata-Version: 1.1 Name: pip -Version: 6.0.6 +Version: 6.0.7 Summary: The PyPA recommended tool for installing Python packages. Home-page: https://pip.pypa.io/ Author: The pip developers diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/pip-6.0.6/pip.egg-info/pbr.json new/pip-6.0.7/pip.egg-info/pbr.json --- old/pip-6.0.6/pip.egg-info/pbr.json 2015-01-03 10:32:20.000000000 +0100 +++ new/pip-6.0.7/pip.egg-info/pbr.json 2015-01-28 22:35:31.000000000 +0100 @@ -1 +1 @@ -{"git_version": "a898b9b", "is_release": true} \ No newline at end of file +{"git_version": "2a96914", "is_release": true} \ No newline at end of file -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit python3-pymongo for openSUSE:Factory
by root＠hilbert.suse.de 01 Feb '15

01 Feb '15

Hello community, here is the log from the commit of package python3-pymongo for openSUSE:Factory checked in at 2015-02-01 12:30:27 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/python3-pymongo (Old) and /work/SRC/openSUSE:Factory/.python3-pymongo.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "python3-pymongo" Changes: -------- --- /work/SRC/openSUSE:Factory/python3-pymongo/python3-pymongo.changes 2014-12-16 14:47:40.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.python3-pymongo.new/python3-pymongo.changes 2015-02-01 12:30:37.000000000 +0100 @@ -1,0 +2,24 @@ +Sat Jan 31 22:02:54 UTC 2015 - arun(a)gmx.de + +- specfile: + * update copyright year + * remove ifdef for opensuse version < 1130 + +- update to version 2.8: + * Version 2.8 is a major release that provides full support for + MongoDB 3.0 and fixes a number of bugs. + * Support for the SCRAM-SHA-1 authentication mechanism (new in + MongoDB 3.0). + * JSON decoder support for the new $numberLong and $undefined types. + * JSON decoder support for the $date type as an ISO-8601 string. + * Support passing an index name to + :meth:`~pymongo.cursor.Cursor.hint`. + * The :meth:`~pymongo.cursor.Cursor.count` method will use a hint if + one has been provided through :meth:`~pymongo.cursor.Cursor.hint`. + * A new socketKeepAlive option for the connection pool. + * New generator based BSON decode functions, + :func:`~bson.decode_iter` and :func:`~bson.decode_file_iter`. + * Internal changes to support alternative storage engines like + wiredtiger. + +------------------------------------------------------------------- Old: ---- pymongo-2.7.2.tar.gz New: ---- pymongo-2.8.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ python3-pymongo.spec ++++++ --- /var/tmp/diff_new_pack.GDaHsR/_old 2015-02-01 12:30:38.000000000 +0100 +++ /var/tmp/diff_new_pack.GDaHsR/_new 2015-02-01 12:30:38.000000000 +0100 @@ -1,7 +1,7 @@ # # spec file for package python3-pymongo # -# Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2015 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,7 +17,7 @@ Name: python3-pymongo -Version: 2.7.2 +Version: 2.8 Release: 0 Url: http://github.com/mongodb/mongo-python-driver Summary: Python driver for MongoDB @@ -31,9 +31,6 @@ BuildRequires: python3-distribute #BuildRequires: python-nose Suggests: mongodb -%if %{?suse_version} <= 1140 -%define python3_sitearch /usr/lib64/python3.1/site-packages -%endif #currently mongodb is available only for little-endian CPU ExclusiveArch: %{ix86} x86_64 ++++++ pymongo-2.7.2.tar.gz -> pymongo-2.8.tar.gz ++++++ ++++ 7822 lines of diff (skipped) -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit python3-virtualenv for openSUSE:Factory
by root＠hilbert.suse.de 01 Feb '15

01 Feb '15

Hello community, here is the log from the commit of package python3-virtualenv for openSUSE:Factory checked in at 2015-02-01 12:30:24 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/python3-virtualenv (Old) and /work/SRC/openSUSE:Factory/.python3-virtualenv.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "python3-virtualenv" Changes: -------- --- /work/SRC/openSUSE:Factory/python3-virtualenv/python3-virtualenv.changes 2015-01-07 09:38:36.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.python3-virtualenv.new/python3-virtualenv.changes 2015-02-01 12:30:35.000000000 +0100 @@ -1,0 +2,7 @@ +Sat Jan 31 22:01:21 UTC 2015 - arun(a)gmx.de + +- update to version 12.0.6: + * Upgrade pip to 6.0.7 + * Upgrade setuptools to 12.0.5 + +------------------------------------------------------------------- Old: ---- virtualenv-12.0.5.tar.gz New: ---- virtualenv-12.0.6.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ python3-virtualenv.spec ++++++ --- /var/tmp/diff_new_pack.NrnUOm/_old 2015-02-01 12:30:36.000000000 +0100 +++ /var/tmp/diff_new_pack.NrnUOm/_new 2015-02-01 12:30:36.000000000 +0100 @@ -17,7 +17,7 @@ Name: python3-virtualenv -Version: 12.0.5 +Version: 12.0.6 Release: 0 Url: http://www.virtualenv.org/ Summary: Virtual Python Environment builder ++++++ virtualenv-12.0.5.tar.gz -> virtualenv-12.0.6.tar.gz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/virtualenv-12.0.5/PKG-INFO new/virtualenv-12.0.6/PKG-INFO --- old/virtualenv-12.0.5/PKG-INFO 2015-01-03 10:43:30.000000000 +0100 +++ new/virtualenv-12.0.6/PKG-INFO 2015-01-28 23:42:27.000000000 +0100 @@ -1,6 +1,6 @@ Metadata-Version: 1.1 Name: virtualenv -Version: 12.0.5 +Version: 12.0.6 Summary: Virtual Python Environment builder Home-page: https://virtualenv.pypa.io/ Author: Jannis Leidel, Carl Meyer and Brian Rosner @@ -47,6 +47,13 @@ Release History =============== + 12.0.6 (2015-01-28) + ~~~~~~~~~~~~~~~~~~~ + + * Upgrade pip to 6.0.7 + + * Upgrade setuptools to 12.0.5 + 12.0.5 (2015-01-03) ~~~~~~~~~~~~~~~~~~~ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/virtualenv-12.0.5/docs/changes.rst new/virtualenv-12.0.6/docs/changes.rst --- old/virtualenv-12.0.5/docs/changes.rst 2015-01-03 10:43:22.000000000 +0100 +++ new/virtualenv-12.0.6/docs/changes.rst 2015-01-28 23:42:09.000000000 +0100 @@ -1,6 +1,13 @@ Release History =============== +12.0.6 (2015-01-28) +~~~~~~~~~~~~~~~~~~~ + +* Upgrade pip to 6.0.7 + +* Upgrade setuptools to 12.0.5 + 12.0.5 (2015-01-03) ~~~~~~~~~~~~~~~~~~~ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/virtualenv-12.0.5/setup.cfg new/virtualenv-12.0.6/setup.cfg --- old/virtualenv-12.0.5/setup.cfg 2015-01-03 10:43:30.000000000 +0100 +++ new/virtualenv-12.0.6/setup.cfg 2015-01-28 23:42:27.000000000 +0100 @@ -1,5 +1,5 @@ [egg_info] +tag_date = 0 tag_build = tag_svn_revision = 0 -tag_date = 0 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/virtualenv-12.0.5/virtualenv.egg-info/PKG-INFO new/virtualenv-12.0.6/virtualenv.egg-info/PKG-INFO --- old/virtualenv-12.0.5/virtualenv.egg-info/PKG-INFO 2015-01-03 10:43:27.000000000 +0100 +++ new/virtualenv-12.0.6/virtualenv.egg-info/PKG-INFO 2015-01-28 23:42:26.000000000 +0100 @@ -1,6 +1,6 @@ Metadata-Version: 1.1 Name: virtualenv -Version: 12.0.5 +Version: 12.0.6 Summary: Virtual Python Environment builder Home-page: https://virtualenv.pypa.io/ Author: Jannis Leidel, Carl Meyer and Brian Rosner @@ -47,6 +47,13 @@ Release History =============== + 12.0.6 (2015-01-28) + ~~~~~~~~~~~~~~~~~~~ + + * Upgrade pip to 6.0.7 + + * Upgrade setuptools to 12.0.5 + 12.0.5 (2015-01-03) ~~~~~~~~~~~~~~~~~~~ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/virtualenv-12.0.5/virtualenv.egg-info/SOURCES.txt new/virtualenv-12.0.6/virtualenv.egg-info/SOURCES.txt --- old/virtualenv-12.0.5/virtualenv.egg-info/SOURCES.txt 2015-01-03 10:43:30.000000000 +0100 +++ new/virtualenv-12.0.6/virtualenv.egg-info/SOURCES.txt 2015-01-28 23:42:27.000000000 +0100 @@ -33,5 +33,5 @@ virtualenv_embedded/distutils.cfg virtualenv_embedded/site.py virtualenv_support/__init__.py -virtualenv_support/pip-6.0.6-py2.py3-none-any.whl -virtualenv_support/setuptools-11.0-py2.py3-none-any.whl \ No newline at end of file +virtualenv_support/pip-6.0.7-py2.py3-none-any.whl +virtualenv_support/setuptools-12.0.5-py2.py3-none-any.whl \ No newline at end of file diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/virtualenv-12.0.5/virtualenv.egg-info/pbr.json new/virtualenv-12.0.6/virtualenv.egg-info/pbr.json --- old/virtualenv-12.0.5/virtualenv.egg-info/pbr.json 2015-01-03 10:43:27.000000000 +0100 +++ new/virtualenv-12.0.6/virtualenv.egg-info/pbr.json 2015-01-28 23:42:26.000000000 +0100 @@ -1 +1 @@ -{"git_version": "9205ff4", "is_release": true} \ No newline at end of file +{"is_release": true, "git_version": "b789e82"} \ No newline at end of file diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/virtualenv-12.0.5/virtualenv.py new/virtualenv-12.0.6/virtualenv.py --- old/virtualenv-12.0.5/virtualenv.py 2015-01-03 10:43:22.000000000 +0100 +++ new/virtualenv-12.0.6/virtualenv.py 2015-01-28 23:42:09.000000000 +0100 @@ -2,7 +2,7 @@ """Create a "virtual" Python installation """ -__version__ = "12.0.5" +__version__ = "12.0.6" virtualenv_version = __version__ # legacy import base64 Files old/virtualenv-12.0.5/virtualenv_support/pip-6.0.6-py2.py3-none-any.whl and new/virtualenv-12.0.6/virtualenv_support/pip-6.0.6-py2.py3-none-any.whl differ Files old/virtualenv-12.0.5/virtualenv_support/pip-6.0.7-py2.py3-none-any.whl and new/virtualenv-12.0.6/virtualenv_support/pip-6.0.7-py2.py3-none-any.whl differ Files old/virtualenv-12.0.5/virtualenv_support/setuptools-11.0-py2.py3-none-any.whl and new/virtualenv-12.0.6/virtualenv_support/setuptools-11.0-py2.py3-none-any.whl differ Files old/virtualenv-12.0.5/virtualenv_support/setuptools-12.0.5-py2.py3-none-any.whl and new/virtualenv-12.0.6/virtualenv_support/setuptools-12.0.5-py2.py3-none-any.whl differ -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit sawfish for openSUSE:Factory
by root＠hilbert.suse.de 01 Feb '15

01 Feb '15

Hello community, here is the log from the commit of package sawfish for openSUSE:Factory checked in at 2015-02-01 12:30:22 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/sawfish (Old) and /work/SRC/openSUSE:Factory/.sawfish.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "sawfish" Changes: -------- --- /work/SRC/openSUSE:Factory/sawfish/sawfish.changes 2014-09-03 21:07:58.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.sawfish.new/sawfish.changes 2015-02-01 12:30:27.000000000 +0100 @@ -1,0 +2,11 @@ +Sat Jan 31 19:31:40 UTC 2015 - sfalken(a)opensuse.org + +- Update to version 1.11: + + enable input-line in cabinet + + update Elberg-tabbed and gradient-tabbed for recent changes +- Dropped: + + sawfish_1.10.99.tar.xz +- Added: + + fix_desktop_files.patch to correct Category and GenericName + errors in post-build-checks +------------------------------------------------------------------- Old: ---- sawfish_1.10.99.tar.xz New: ---- fix_desktop_files.patch sawfish_1.11.tar.xz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ sawfish.spec ++++++ --- /var/tmp/diff_new_pack.wOVO6W/_old 2015-02-01 12:30:28.000000000 +0100 +++ /var/tmp/diff_new_pack.wOVO6W/_new 2015-02-01 12:30:28.000000000 +0100 @@ -1,7 +1,7 @@ # # spec file for package sawfish # -# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2015 SUSE LINUX GmbH, Nuernberg, Germany. # Copyright (c) 2007 Jan Nieuwenhuizen <jnieuwenhuizen(a)novell.com> # Copyright (c) 2000 John Harper <john(a)dcs.warwick.ac.uk> # @@ -19,14 +19,13 @@ Name: sawfish -Version: 1.10.99 +Version: 1.11 Release: 0 Summary: A highly configurable window manager for X11 License: GPL-2.0+ +Group: System/GUI/Other %if 0%{?suse_version} > 1230 -Group: User Interface/Desktops %else -Group: System/GUI/Other %endif Url: http://sawfish.wikia.com/ @@ -35,6 +34,8 @@ Source1: suse-start-sawfish.el # PATCH-FIX-OPENSUSE toganm(a)opensuse.org avoid unnecessary rebuilds Patch1: sawfish-1.9.1-remove-buildtime.patch +# PATCH-FIX-OPENSUSE fix_desktop_files.patch sfalken(a)opensuse.org -- Fixes post-build-check errors +Patch2: fix_desktop_files.patch BuildRequires: fdupes BuildRequires: gmp-devel BuildRequires: pkg-config @@ -85,10 +86,9 @@ %package sounds Summary: A highly configurable window manager for X11 - Sound files License: Artistic-2.0 +Group: System/GUI/Other %if 0%{?suse_version} > 1230 -Group: User Interface/Desktops %else -Group: System/GUI/Other %endif BuildArch: noarch @@ -109,10 +109,9 @@ %package devel Summary: A highly configurable window manager for X11 - Development Files License: GPL-2.0+ +Group: Development/Languages/Scheme %if 0%{?suse_version} > 1230 -Group: Development/Languages %else -Group: Development/Languages/Scheme %endif Requires: %{name} = %{version} Requires: librep-devel @@ -135,6 +134,7 @@ %prep %setup -q -n %{name}_%{version} %patch1 -p1 +%patch2 -p1 %build export CFLAGS="%{optflags} -fno-strict-aliasing " @@ -187,6 +187,7 @@ %{_bindir}/sawfish-about %{_bindir}/sawfish-client %{_bindir}/sawfish-config +%{_bindir}/%{name}-*-session %{_datadir}/%{name}/*/*.jl %{_datadir}/%{name}/*/*/*.jl %{_datadir}/%{name}/*/*/*/*.jl @@ -200,10 +201,12 @@ %dir %{_datadir}/kde4/apps/ksmserver %dir %{_datadir}/kde4/apps/ksmserver/windowmanagers %{_datadir}/applications/%{name}.desktop +%{_datadir}/applications/%{name}-config.desktop %{_datadir}/gnome/wm-properties/%{name}-wm.desktop %{_datadir}/kde4/apps/ksmserver/windowmanagers/sawfish.desktop %{_datadir}/icons/hicolor/32x32/apps/sawfish-config.png %{_datadir}/xsessions/%{name}.desktop +%{_datadir}/xsessions/%{name}-*.desktop %{_libdir}/%{name}/ %{_libdir}/rep/%{name}/ %doc %{_infodir}/%{name}.* @@ -215,7 +218,6 @@ %_datadir/emacs/site-lisp/%name.el %_datadir/emacs/site-lisp/suse-start-sawfish.el - %files devel %defattr(-,root,root) %{_includedir}/sawfish/ ++++++ fix_desktop_files.patch ++++++ Index: sawfish_1.11/data/sawfish-config.desktop =================================================================== --- sawfish_1.11.orig/data/sawfish-config.desktop +++ sawfish_1.11/data/sawfish-config.desktop @@ -1,4 +1,6 @@ [Desktop Entry] Type=Application Name=Sawfish Config +GenericName=Sawfish Config +Categories=Utility;Applet; Exec=sawfish-config Index: sawfish_1.11/data/sawfish.desktop =================================================================== --- sawfish_1.11.orig/data/sawfish.desktop +++ sawfish_1.11/data/sawfish.desktop @@ -2,4 +2,6 @@ Type=Application Name=Sawfish Name[el]=Πριονόψαρο (Sawfish) +GenericName=Sawfish +Categories=Utility;DesktopUtility; Exec=sawfish ++++++ sawfish_1.10.99.tar.xz -> sawfish_1.11.tar.xz ++++++ ++++ 3387 lines of diff (skipped) -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit sbcl for openSUSE:Factory
by root＠hilbert.suse.de 01 Feb '15

01 Feb '15

Hello community, here is the log from the commit of package sbcl for openSUSE:Factory checked in at 2015-02-01 12:30:18 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/sbcl (Old) and /work/SRC/openSUSE:Factory/.sbcl.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "sbcl" Changes: -------- --- /work/SRC/openSUSE:Factory/sbcl/sbcl.changes 2015-01-09 20:50:40.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.sbcl.new/sbcl.changes 2015-02-01 12:30:22.000000000 +0100 @@ -1,0 +2,30 @@ +Sat Jan 31 20:05:23 UTC 2015 - toganm(a)opensuse.org + +- Update to version 1.2.8 + + * Enhancement: + +better error and warning messages. (lp#1314767, + lp#736383) + + backtrace for invalid argument count produces the + exact supplied arguments including the extra ones, on x86, + x86-64 and ARM. + + STYLE-WARNING is signaled for DEFSTRUCT accessors which + are used before the structure is defined; similarly for the + predicate. + * Optimization + + FORMAT NIL with only ~a and string arguments is transformed + into CONCATENATE. + + POSITION and FIND when inlined into code that is compiled + with qualities of safety < 2 and speed > space will no longer + signal an error on circular lists, but will potentially loop + forever if given no :END constraint. As was always the case, + calls that are not inlined are safe regardless of lexical + policy. + * Bug Fix: + + CLOS methods compiled with (OPTIMIZE (DEBUG 0))no longer + cause debugger failure when printing a backtrace + + more resilience to deleted code. (lp#1308328, lp#1390544) + + the CLHS example of MAKE-LOAD-FORM involving TREE-WITH-PARENT + did not work, and now it does. + +------------------------------------------------------------------- Old: ---- sbcl-1.2.7-source.tar.bz2 New: ---- sbcl-1.2.8-source.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ sbcl.spec ++++++ --- /var/tmp/diff_new_pack.XrAZwP/_old 2015-02-01 12:30:23.000000000 +0100 +++ /var/tmp/diff_new_pack.XrAZwP/_new 2015-02-01 12:30:23.000000000 +0100 @@ -1,7 +1,7 @@ # # spec file for package sbcl # -# Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2015 SUSE LINUX GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,7 +17,7 @@ Name: sbcl -Version: 1.2.7 +Version: 1.2.8 Release: 0 Summary: Steel Bank Common Lisp License: SUSE-Public-Domain and BSD-3-Clause ++++++ sbcl-1.1.17-optflags.patch ++++++ --- /var/tmp/diff_new_pack.XrAZwP/_old 2015-02-01 12:30:23.000000000 +0100 +++ /var/tmp/diff_new_pack.XrAZwP/_new 2015-02-01 12:30:23.000000000 +0100 @@ -52,8 +52,8 @@ --- a/src/runtime/Config.x86-linux +++ b/src/runtime/Config.x86-linux -@@ -42,6 +42,8 @@ ifdef LISP_FEATURE_SB_CORE_COMPRESSION - OS_LIBS += -lz +@@ -49,6 +49,8 @@ LINKFLAGS += -nopie + LDFLAGS += -nopie endif +CFLAGS += $(RPM_OPT_FLAGS) ++++++ sbcl-1.2.7-source.tar.bz2 -> sbcl-1.2.8-source.tar.bz2 ++++++ ++++ 10474 lines of diff (skipped) -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit mathgl for openSUSE:Factory
by root＠hilbert.suse.de 01 Feb '15

01 Feb '15

Hello community, here is the log from the commit of package mathgl for openSUSE:Factory checked in at 2015-02-01 12:30:15 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/mathgl (Old) and /work/SRC/openSUSE:Factory/.mathgl.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "mathgl" Changes: -------- --- /work/SRC/openSUSE:Factory/mathgl/mathgl.changes 2014-11-24 11:09:02.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.mathgl.new/mathgl.changes 2015-02-01 12:30:19.000000000 +0100 @@ -1,0 +2,7 @@ +Sat Jan 31 16:41:17 UTC 2015 - dmitry_r(a)opensuse.org + +- Update to version 2.3.1 + * See included ChangeLog.txt file for details + * Update mathgl-examples-install.patch + +------------------------------------------------------------------- Old: ---- mathgl-2.3.tar.gz New: ---- mathgl-2.3.1.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ mathgl.spec ++++++ --- /var/tmp/diff_new_pack.eeyZZB/_old 2015-02-01 12:30:20.000000000 +0100 +++ /var/tmp/diff_new_pack.eeyZZB/_new 2015-02-01 12:30:20.000000000 +0100 @@ -1,7 +1,7 @@ # # spec file for package mathgl # -# Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2015 SUSE LINUX GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -16,18 +16,16 @@ # -%{!?python_sitelib: %global python_sitelib %(%{__python} -c "from distutils.sysconfig import get_python_lib; print(get_python_lib())")} -%{!?python_sitearch: %global python_sitearch %(%{__python} -c "from distutils.sysconfig import get_python_lib; print(get_python_lib(1))")} %define octave_args --no-window-system --norc Name: mathgl %define libname libmgl -Version: 2.3 +Version: 2.3.1 Release: 0 # oct_version must be x.y.z -%define oct_version 2.3.0 -%define somajor 7.3.0 -%define libversion 7_3_0 +%define oct_version 2.3.1 +%define somajor 7.4.0 +%define libversion 7_4_0 Summary: Cross-platform library for making high-quality scientific graphics License: GPL-3.0 Group: Productivity/Scientific/Other @@ -359,11 +357,6 @@ # convert EOL encodings, maintaining timestames sed -i 's/\r$//' AUTHORS README -# workaround for qt5 headers, not controllable by enable-qt5 -%if 0%{?suse_version} <= 1315 -sed -i '/\#include <qt5\/QtCore\/QTimer>/d' widgets/qt.cpp -%endif - %build cmake \ -DCMAKE_INSTALL_PREFIX:PATH=%{_prefix} \ @@ -372,6 +365,7 @@ -Denable-mpi=off \ -Denable-pthread=off \ -Denable-openmp=on \ + -Denable-ltdl=on \ -Denable-gsl=on \ -Denable-jpeg=on \ -Denable-png=on \ ++++++ mathgl-2.3.tar.gz -> mathgl-2.3.1.tar.gz ++++++ ++++ 5696 lines of diff (skipped) ++++++ mathgl-examples-install.patch ++++++ --- /var/tmp/diff_new_pack.eeyZZB/_old 2015-02-01 12:30:21.000000000 +0100 +++ /var/tmp/diff_new_pack.eeyZZB/_new 2015-02-01 12:30:21.000000000 +0100 @@ -1,8 +1,8 @@ -Index: mathgl-2.2.1/examples/CMakeLists.txt +Index: mathgl-2.3.1/examples/CMakeLists.txt =================================================================== ---- mathgl-2.2.1.orig/examples/CMakeLists.txt -+++ mathgl-2.2.1/examples/CMakeLists.txt -@@ -4,22 +4,38 @@ endif(MGL_HAVE_GSL) +--- mathgl-2.3.1.orig/examples/CMakeLists.txt ++++ mathgl-2.3.1/examples/CMakeLists.txt +@@ -4,34 +4,59 @@ endif(MGL_HAVE_GSL) add_executable(mgl_example wnd_samples.cpp full_test.cpp samples.cpp) target_link_libraries(mgl_example mgl) @@ -24,7 +24,7 @@ if(MGL_HAVE_GLUT) add_executable(mgl_glut_example wnd_samples.cpp glut_example.cpp) target_link_libraries(mgl_glut_example mgl-glut) -+ install( ++ install( + TARGETS mgl_glut_example + RUNTIME DESTINATION bin + ) @@ -34,27 +34,41 @@ include(${wxWidgets_USE_FILE}) add_executable(mgl_wx_example wnd_samples.cpp wx_example.cpp) target_link_libraries(mgl_wx_example mgl-wx) -+ install( ++ install( + TARGETS mgl_wx_example + RUNTIME DESTINATION bin + ) endif(MGL_HAVE_WX) - if(enable-qt) -@@ -27,8 +43,16 @@ if(enable-qt) - if(enable-qt5) - include(../cmake-qt5.txt) - target_link_libraries(mgl_qt_example mgl-qt5) -+ install( -+ TARGETS mgl_qt_example +-if(enable-qt) +- add_executable(mgl_qt_example wnd_samples.cpp qt_example.cpp ${MGL_MOC_EX_FILES}) +- if(enable-qt5) +- include(../cmake-qt5.txt) +- target_link_libraries(mgl_qt_example mgl-qt5) +- else(enable-qt5) +- include(../cmake-qt4.txt) +- target_link_libraries(mgl_qt_example mgl-qt4) +- endif(enable-qt5) +-endif(enable-qt) ++if(enable-qt4) ++ add_executable(mgl_qt4_example wnd_samples.cpp qt_example.cpp ${MGL_MOC_EX_FILES}) ++ include(../cmake-qt4.txt) ++ target_link_libraries(mgl_qt4_example mgl-qt4) ++ install( ++ TARGETS mgl_qt4_example + RUNTIME DESTINATION bin -+ ) - else(enable-qt5) - include(../cmake-qt4.txt) - target_link_libraries(mgl_qt_example mgl-qt4) -+ install( -+ TARGETS mgl_qt_example ++ ) ++endif(enable-qt4) ++ ++if(enable-qt5) ++ add_executable(mgl_qt5_example wnd_samples.cpp qt_example.cpp ${MGL_MOC_EX_FILES}) ++ include(../cmake-qt5.txt) ++ target_link_libraries(mgl_qt5_example mgl-qt5) ++ install( ++ TARGETS mgl_qt5_example + RUNTIME DESTINATION bin -+ ) - endif(enable-qt5) - endif(enable-qt) ++ ) ++endif(enable-qt5) + + if(MGL_HAVE_LTDL) + include_directories(${LTDL_INCLUDE_DIR}) -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit WindowMaker for openSUSE:Factory
by root＠hilbert.suse.de 01 Feb '15

01 Feb '15

Hello community, here is the log from the commit of package WindowMaker for openSUSE:Factory checked in at 2015-02-01 12:30:12 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/WindowMaker (Old) and /work/SRC/openSUSE:Factory/.WindowMaker.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "WindowMaker" Changes: -------- --- /work/SRC/openSUSE:Factory/WindowMaker/WindowMaker.changes 2014-11-11 01:11:58.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.WindowMaker.new/WindowMaker.changes 2015-02-01 12:30:17.000000000 +0100 @@ -1,0 +2,5 @@ +Tue Jan 27 18:11:07 UTC 2015 - jengelh(a)inai.de + +- Update wm-giflib.patch to support giflib-5.1 + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ WindowMaker.spec ++++++ --- /var/tmp/diff_new_pack.BuBcfP/_old 2015-02-01 12:30:18.000000000 +0100 +++ /var/tmp/diff_new_pack.BuBcfP/_new 2015-02-01 12:30:18.000000000 +0100 @@ -1,7 +1,7 @@ # # spec file for package WindowMaker # -# Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2015 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed ++++++ wm-giflib.patch ++++++ --- /var/tmp/diff_new_pack.BuBcfP/_old 2015-02-01 12:30:18.000000000 +0100 +++ /var/tmp/diff_new_pack.BuBcfP/_new 2015-02-01 12:30:18.000000000 +0100 @@ -86,7 +86,7 @@ WPrefs.app/editmenu.c | 4 ++++ WPrefs.app/main.c | 4 ++++ WPrefs.app/xmodifier.c | 4 ++++ - configure.ac | 5 +++-- + configure.ac | 4 +++- src/actions.c | 4 ++++ src/appicon.c | 4 ++++ src/application.c | 4 ++++ @@ -161,12 +161,12 @@ wmlib/event.c | 4 ++++ wmlib/menu.c | 4 ++++ wrlib/alpha_combine.c | 4 ++++ - wrlib/gif.c | 26 +++++++++++++++++++++++--- + wrlib/load_gif.c | 7 +++++-- wrlib/tests/testdraw.c | 4 ++++ wrlib/tests/testgrad.c | 4 ++++ wrlib/tests/testrot.c | 4 ++++ wrlib/tests/view.c | 4 ++++ - 167 files changed, 686 insertions(+), 5 deletions(-) + 167 files changed, 668 insertions(+), 3 deletions(-) Index: WindowMaker-0.95.6/WINGs/Examples/colorpick.c =================================================================== @@ -2497,6 +2497,39 @@ #include "wraster.h" void RCombineAlpha(unsigned char *d, unsigned char *s, int s_has_alpha, +Index: WindowMaker-0.95.6/wrlib/load_gif.c +=================================================================== +--- WindowMaker-0.95.6.orig/wrlib/load_gif.c ++++ WindowMaker-0.95.6/wrlib/load_gif.c +@@ -27,6 +27,10 @@ + #include <string.h> + + #include <gif_lib.h> ++#if defined(GIFLIB_MAJOR) && (GIFLIB_MAJOR > 5 || (GIFLIB_MAJOR >= 5 && GIFLIB_MINOR >= 1)) ++#else ++# define DGifCloseFile(a, b) DGifCloseFile(a) ++#endif + + #include "wraster.h" + #include "imgformat.h" +@@ -81,7 +84,7 @@ RImage *RLoadGIF(const char *file, int i + } + + if (gif->SWidth < 1 || gif->SHeight < 1) { +- DGifCloseFile(gif); ++ DGifCloseFile(gif, NULL); + RErrorCode = RERR_BADIMAGEFILE; + return NULL; + } +@@ -216,7 +219,7 @@ RImage *RLoadGIF(const char *file, int i + free(buffer); + + if (gif) +- DGifCloseFile(gif); ++ DGifCloseFile(gif, NULL); + + return image; + } Index: WindowMaker-0.95.6/wrlib/tests/testdraw.c =================================================================== --- WindowMaker-0.95.6.orig/wrlib/tests/testdraw.c -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit python-Django for openSUSE:Factory
by root＠hilbert.suse.de 01 Feb '15

01 Feb '15

Hello community, here is the log from the commit of package python-Django for openSUSE:Factory checked in at 2015-02-01 12:30:09 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/python-Django (Old) and /work/SRC/openSUSE:Factory/.python-Django.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "python-Django" Changes: -------- --- /work/SRC/openSUSE:Factory/python-Django/python-Django.changes 2015-01-14 11:46:07.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.python-Django.new/python-Django.changes 2015-02-01 12:30:14.000000000 +0100 @@ -1,0 +2,18 @@ +Fri Jan 30 15:13:10 UTC 2015 - aplanas(a)suse.com + +- Update to Django 1.7.4: + Bugfixes + * Fixed a migration crash when unapplying ``contrib.contenttypes``’s + or ``contrib.auth``’s first migration (:ticket:`24075`). + * Made the migration's ``RenameModel`` operation rename + ``ManyToManyField`` tables (:ticket:`24135`). + * Fixed a migration crash on MySQL when migrating from a + ``OneToOneField`` to a ``ForeignKey`` (:ticket:`24163`). + * Prevented the ``static.serve`` view from producing + ``ResourceWarning``\s in certain circumstances (security fix + regression, :ticket:`24193`). + * Fixed schema check for ManyToManyField to look for internal type + instead of checking class instance, so you can write custom + m2m-like fields with the same behavior. (:ticket:`24104`). + +------------------------------------------------------------------- Old: ---- Django-1.7.3.checksum.txt Django-1.7.3.tar.gz New: ---- Django-1.7.4.checksum.txt Django-1.7.4.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ python-Django.spec ++++++ --- /var/tmp/diff_new_pack.OOWOpo/_old 2015-02-01 12:30:15.000000000 +0100 +++ /var/tmp/diff_new_pack.OOWOpo/_new 2015-02-01 12:30:15.000000000 +0100 @@ -1,7 +1,7 @@ # # spec file for package python-Django # -# Copyright (c) 2015 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2015 SUSE LINUX GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,7 +17,7 @@ Name: python-Django -Version: 1.7.3 +Version: 1.7.4 Release: 0 Summary: A high-level Python Web framework License: BSD-3-Clause ++++++ Django-1.7.3.checksum.txt -> Django-1.7.4.checksum.txt ++++++ --- /work/SRC/openSUSE:Factory/python-Django/Django-1.7.3.checksum.txt 2015-01-14 11:46:07.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.python-Django.new/Django-1.7.4.checksum.txt 2015-02-01 12:30:13.000000000 +0100 @@ -2,7 +2,7 @@ Hash: SHA256 This file contains MD5, SHA1, and SHA256 checksums for the source-code -tarball of Django 1.7.3, released January 13, 2015. +tarball of Django 1.7.4, released January 27, 2015. To use this file, you will need a working install of PGP or other compatible public-key encryption software. You will also need to have @@ -24,40 +24,40 @@ Release packages: ================= -Django 1.7.3 (tar.tgz): https://www.djangoproject.com/m/releases/1.7/Django-1.7.3.tar.gz -Django 1.7.3 (.whl): https://www.djangoproject.com/m/releases/1.7/Django-1.7.3-py2.py3-none-any.… +Django 1.7.4 (tar.tgz): https://www.djangoproject.com/m/releases/1.7/Django-1.7.4.tar.gz +Django 1.7.4 (.whl): https://www.djangoproject.com/m/releases/1.7/Django-1.7.4-py2.py3-none-any.… MD5 checksums: ============== -bd24beec81e161d30ad925aef9d23e57 Django-1.7.3-py2.py3-none-any.whl -ea9a3fe7eca2280b233938a98c4a35a0 Django-1.7.3.tar.gz +f465b25daeaa559ffc329f1e5daaa520 Django-1.7.4-py2.py3-none-any.whl +f8db10520f0268747d402a47a1a4b191 Django-1.7.4.tar.gz SHA1 checksums: =============== -74a977b77880818335cf6ff3ae8d5d28bfadaaf6 Django-1.7.3-py2.py3-none-any.whl -2577e8e40999f5120b091c17e8cabfb518917ca2 Django-1.7.3.tar.gz +ba071d5e3f619130d2a5086d03c4930fc2db511f Django-1.7.4-py2.py3-none-any.whl +4b06c77f10d4a34bacfb54023b6bdfd6961505a4 Django-1.7.4.tar.gz SHA256 checksums: ================= -72edd47b55ae748d29f1a71d5ca4b86e785c9fb974407cf242b3168e6f1b177e Django-1.7.3-py2.py3-none-any.whl -f226fb8aa438456968d403f6739de1cf2dad128db86f66ee2b41dfebe3645c5b Django-1.7.3.tar.gz +42002065cc98bc99b5bae0084ddb13a0ad611a171dcdaf5ba96731935da744a4 Django-1.7.4-py2.py3-none-any.whl +f33255afbb9ee0977d9095ab0b50fde1f8ddff4220b57e8d19c6620b3e316170 Django-1.7.4.tar.gz -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 -iQIbBAEBCAAGBQJUtWTMAAoJEB6Kvcdz7eJSrX0P91/cNLe5oISzWH/viWQpj3C7 -khbTl61sRakbx45mEqhW6GJqNxJwsyZuVDzL8sxXGvyRqRsLE2nd5stM2xHqXxMN -vZJUYeyUCBaH1ozCzhvA4k8mXSX7twy6puYKgk0FcuMbgFepkuqnqep6cryAmgOk -5tcTgxwF/bxUZ7YGa3AdQsIvLU6rGLupDIqMmG+8W94VwKg2+PhOEAv3iB6e1DxA -aOKI/leMbkxF3eG4HnvPTdO80cM63Sp+654Kj9d+Q94nMQY/pAp5q6j9lCxZFwYj -eak/joly9UZwlRMO1HeV8jCzcq/7xDe4OIQR1o2YY1hWK89yA1I1fT4TQTTlbBk3 -lPKrdkSxievYy7Ggs0+3f4534A5g3I05sd/w5R68L6QuXxZt/yZDQzpxkdE+bT4D -ZO0nVc3fZ0qlmTJIohtHjKK6MBcG9igAWz7VYmr/iDeUCdK1Y/b1TN+i4pmth2tX -NJJw9c0bev/A4+Qe1WCRodqd9Ipcs4MLKJMzIho75rhOLfUyC8JQWrISqSNc9PmQ -lj7sITcASQL7T55CdNalB1XRZig/Il0Qhoil7Mwae7/gwqz9IHMlW1VDntfaCdTN -83Nm80mDhgdm0i0lJHbUmlNAAgYT3W0mEyH3+5uep0PNn02ZhTTTPL7wzfZmCs+N -7PWSYlGP8/4JjD65yqw= -=/LA8 +iQIcBAEBCAAGBQJUx8e5AAoJEB6Kvcdz7eJSb98P/1/yjV3NXQr82v2aSoba9B8e +tqkfAF1FeQYXcvHO5PQWUJnRZdf8g/bdXdgTRwdvErJ6STFjM4Da//d6OyuVfbDs +dgBnvCXA3nM355RVwifzwzvoks3zwxT9Da4+E1mAx5V59D5hln9+yILOi0gUxz1+ +JEojOstJDEEs69O4QY9BirOWORLJAkXZ8K7S5LAzfNDQq2sQ0HR/hDUOAtSAI5fq +nnyYUPVGz+YntuBfmhV/Gw78nTYVVOalqIPBg85qXzyIQ7vNAyd3KkHo6X14cwsu +WhfrUbDbf9ybxOaifUo7m/rCg2y+bshIb1IROSMMgg6VD+jSXJ92YEpPjzXCUMS/ +jeLGBu3MuUzZDZ+S3FCwXp8XB05RdfUjrU7jZWlmWkFabMxn6cdlnX93ke2Kr9ov +zF1H1mHmNNR1gLzHIuxTo5NxQdn3YGKLboDeOSDJeVKHn2tdW2Q8iwXOARTRakH+ +6nL3LeQT41xCkYyaYK8FgBipItE4540bmhOU4M27SJCydqHeg8zEwEQfZntYXwFk +u/RYR+uwIc7HCr0IKIKFqloKhp+tCnIttg97a5redAYr4kzVbzQwEuLM3IgiTDKJ +2cOPNIYkhhXMAqk1My8etUd0qSVuWk+oOI6ILGhUZgb7408uQX/Qdcn34ZF1fKhN +6in8lMRhhF+ypVhhNeEb +=YASP -----END PGP SIGNATURE----- ++++++ Django-1.7.3.tar.gz -> Django-1.7.4.tar.gz ++++++ /work/SRC/openSUSE:Factory/python-Django/Django-1.7.3.tar.gz /work/SRC/openSUSE:Factory/.python-Django.new/Django-1.7.4.tar.gz differ: char 5, line 1 -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit calibre for openSUSE:Factory
by root＠hilbert.suse.de 01 Feb '15

01 Feb '15

Hello community, here is the log from the commit of package calibre for openSUSE:Factory checked in at 2015-02-01 12:30:06 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/calibre (Old) and /work/SRC/openSUSE:Factory/.calibre.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "calibre" Changes: -------- --- /work/SRC/openSUSE:Factory/calibre/calibre.changes 2015-01-24 22:21:10.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.calibre.new/calibre.changes 2015-02-01 12:30:11.000000000 +0100 @@ -1,0 +2,14 @@ +Fri Jan 30 19:16:41 UTC 2015 - cornelis(a)solcon.nl + +- Update to version 2.18.0: + * New features: + _ Edit Book: Add 'Style Classes' and 'Links' report pages to the Reports tool + - Tag browser: Allow expanding all children of a node by right clicking and choosing 'Expand All' + - Preferences: Re-arrange the controls to avoid needing to move the mouse from the top to the bottom of the dialog when closing the dialog after making some changes + * Bug fixes: + - Save to Disk: Fix a bug where when multiple books are being saved to disk, if the save to disk template results in identical filenames, the filenames were not being properly disambiguated. + - Preferences: Use a dialog instead of a main window to workaround Qt's poor handling of full screen mode on OS X Yosemite + * Improved news sources: + - Al Jazeera in English + +------------------------------------------------------------------- Old: ---- calibre-2.17.0.tar.xz New: ---- calibre-2.18.0.tar.xz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ calibre.spec ++++++ --- /var/tmp/diff_new_pack.Eyc9ge/_old 2015-02-01 12:30:12.000000000 +0100 +++ /var/tmp/diff_new_pack.Eyc9ge/_new 2015-02-01 12:30:12.000000000 +0100 @@ -16,13 +16,11 @@ # -%define intree_cssselect_version 0.7.1 - Summary: EBook Management Application License: GPL-3.0 Group: Productivity/Other Name: calibre -Version: 2.17.0 +Version: 2.18.0 Release: 0 Url: http://calibre-ebook.com Source0: http://download.calibre-ebook.com/%{version}/calibre-%{version}.tar.xz ++++++ calibre-2.17.0.tar.xz -> calibre-2.18.0.tar.xz ++++++ /work/SRC/openSUSE:Factory/calibre/calibre-2.17.0.tar.xz /work/SRC/openSUSE:Factory/.calibre.new/calibre-2.18.0.tar.xz differ: char 27, line 1 ++++++ calibre-setup.install.py.diff ++++++ --- /var/tmp/diff_new_pack.Eyc9ge/_old 2015-02-01 12:30:12.000000000 +0100 +++ /var/tmp/diff_new_pack.Eyc9ge/_new 2015-02-01 12:30:12.000000000 +0100 @@ -2,12 +2,6 @@ =================================================================== --- calibre.orig/setup/install.py +++ calibre/setup/install.py -@@ -1,4 +1,5 @@ - #!/usr/bin/env python -+# -*- coding: utf-8 -*- - # vim:fileencoding=UTF-8:ts=4:sw=4:sta:et:sts=4:ai - from __future__ import with_statement - @@ -75,11 +76,13 @@ class Develop(Command): opts = self.opts if not opts.prefix: -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0