May 2014 - openSUSE Commits - openSUSE Mailing Lists

commit xfsprogs for openSUSE:Factory
by root＠hilbert.suse.de 23 May '14

23 May '14

Hello community, here is the log from the commit of package xfsprogs for openSUSE:Factory checked in at 2014-05-23 08:05:17 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/xfsprogs (Old) and /work/SRC/openSUSE:Factory/.xfsprogs.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "xfsprogs" Changes: -------- --- /work/SRC/openSUSE:Factory/xfsprogs/xfsprogs.changes 2013-05-16 16:25:34.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.xfsprogs.new/xfsprogs.changes 2014-05-23 08:05:21.000000000 +0200 @@ -1,0 +2,54 @@ +Mon May 19 14:19:11 UTC 2014 - jeffm(a)suse.com + +- Updated to 3.2.0 + - xfs_repair has full CRC validation and repair + - xfs_repair prefetch fix + - xfs_repair block tracking scalability fix + - disambiguous of CRC validation errors from IO errors. + - Improved dangerous mode handling in repair + - repair handles garbage in zeroed areas of superblocks better + - repair validates dirent ftype field fully + - metadump fully supports discontiguous directory blocks + - metadump only recalculates CRCs on metadata it obfuscates so as to + preserve errors in the metadata where possible. + - default log size that mkfs creates is now reverted to the same size + as 3.1.x releases create. + - mkfs sets the ftype on directory entries correctly during protofile + population + - xfs_io support O_TMPFILE, flink, FALLOC_FL_ZERO_RANGE and + FALLOC_FL_COLLAPSE_RANGE, + - logprint handles split entries better + - Enable xfs_db write support and xfs_metadump support for CRC + enabled filesystems. + - Add directory entry filetype support for non-CRC filesystems. + - Ensure all inodes created by xfs_repair have a proper d_type set. + - Fix build on big endian machines. + - Properly handle symlinks to devices on various tool commandlines. + - Fix xfs_repair's dirty log detection for 4k sector logs, broken + in Alpha1. + - Fix a potential segfault in xfs_repair when issuing progress + reports. + - Fix potential xfs_fsr failures when running w/ selinux. + - Stop wasting memory by caching inode structures in xfs_repair - + they are never re-used. + - Improved xfs_repair performance on large filesystems + (always use prefetch and strided AG scanning functionality) + - Remove all vestiges of old, unsupported version 1 directory code. + - Add a "readdir" command to xfs_io, thanks to Brian Foster. + - Fix potential segfault in xfs_repair when creating lost+found. + - Zero out unused parts of on-disk superblocks during repair, to + avoid metadata verifier failures at runtime. + - Add directory entry type support to mkfs.xfs and xfs_db. + - Add the icreate transaction to xfs_logprint, and fix continuation + transactions. + - Add the lseek SEEK_DATA/SEEK_HOLE support into xfs_io. + - Print all AGI unlinked buckets in xfs_logprint. + - Fix mkfs.xfs ENOSPC with protofile which creates a very large + directory. + - Do all file reads in xfs_fsr using O_DIRECT. + - Add support for concurrent group and project quota usage on CRC + enabled filesystems. + - Ensure mkfs creates log sizes that are always large enough for + the configured fileystem geometry. + +------------------------------------------------------------------- Old: ---- xfsprogs-3.1.11.tar.gz xfsprogs-avoid-no-return-in-nonvoid-warning.diff New: ---- xfsprogs-3.2.0.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ xfsprogs.spec ++++++ --- /var/tmp/diff_new_pack.UNdAmX/_old 2014-05-23 08:05:22.000000000 +0200 +++ /var/tmp/diff_new_pack.UNdAmX/_new 2014-05-23 08:05:22.000000000 +0200 @@ -1,7 +1,7 @@ # # spec file for package xfsprogs # -# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -27,7 +27,7 @@ %else BuildRequires: libuuid-devel %endif -Version: 3.1.11 +Version: 3.2.0 Release: 0 %if 0%{?suse_version} >= 1010 # hint for ZYPP @@ -40,7 +40,6 @@ Source0: xfsprogs-%{version}.tar.gz Patch0: xfsprogs-docdir.diff Patch1: xfsprogs-ppc64.diff -Patch2: xfsprogs-avoid-no-return-in-nonvoid-warning.diff BuildRoot: %{_tmppath}/%{name}-%{version}-build %description @@ -76,7 +75,6 @@ %patch0 %endif %patch1 -%patch2 %build export OPTIMIZER="-fPIC" ++++++ xfsprogs-3.1.11.tar.gz -> xfsprogs-3.2.0.tar.gz ++++++ ++++ 116586 lines of diff (skipped) -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit sg3_utils for openSUSE:Factory
by root＠hilbert.suse.de 23 May '14

23 May '14

Hello community, here is the log from the commit of package sg3_utils for openSUSE:Factory checked in at 2014-05-23 08:05:16 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/sg3_utils (Old) and /work/SRC/openSUSE:Factory/.sg3_utils.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "sg3_utils" Changes: -------- --- /work/SRC/openSUSE:Factory/sg3_utils/sg3_utils.changes 2014-04-26 17:01:50.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.sg3_utils.new/sg3_utils.changes 2014-05-23 08:05:20.000000000 +0200 @@ -2 +2,11 @@ -Tue Apr 15 20:11:54 UTC 2014 - spargaonkar(a)suse.com +Thu May 15 13:34:33 CEST 2014 - hare(a)suse.de + +- Create compability links for ATA devices (bnc#876344) + Add: + 0003-sg_inq-compability-links-for-ata_id.patch +- Suppress warnings for sg_inq --export (bnc#876454) + Add: + 0004-sg_inq-suppress-warning-messages-for-export.patch + +------------------------------------------------------------------- +Tue Apr 15 16:03:37 UTC 2014 - spargaonkar(a)suse.com New: ---- 0003-sg_inq-compability-links-for-ata_id.patch 0004-sg_inq-suppress-warning-messages-for-export.patch ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ sg3_utils.spec ++++++ --- /var/tmp/diff_new_pack.rMpNdJ/_old 2014-05-23 08:05:21.000000000 +0200 +++ /var/tmp/diff_new_pack.rMpNdJ/_new 2014-05-23 08:05:21.000000000 +0200 @@ -28,6 +28,8 @@ Source: http://sg.danny.cz/sg/p/%name-%{version}.tar.xz Patch1: 0001-Split-59-scsi-sg_utils.rules-for-multipath-support.patch Patch2: sginfo-inq-fields-strip-blank.patch +Patch3: 0003-sg_inq-compability-links-for-ata_id.patch +Patch4: 0004-sg_inq-suppress-warning-messages-for-export.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build BuildRequires: udev BuildRequires: xz @@ -84,6 +86,8 @@ %setup -q -n %{name}-%{version} %patch1 -p1 %patch2 -p1 +%patch3 -p1 +%patch4 -p1 %build %configure --disable-static --with-pic ++++++ 0003-sg_inq-compability-links-for-ata_id.patch ++++++ >From 96300d5e6d62a9fd64183fe6c13a5227d07c6b1f Mon Sep 17 00:00:00 2001 From: Hannes Reinecke <hare(a)suse.de> Date: Thu, 8 May 2014 15:59:33 +0200 Subject: sg_inq: compability links for ata_id The original 'ata_id' program would return the data provided by the 'IDENTIFY' ATA command. As the 'product' information from the IDENTIFY command is 40 bytes long it doesn't fit into the 'product' field for the SCSI inquiry, causing it to be truncated. So we should be adding another field 'SCSI_IDENT_LUN_ATA' to provide ata_id compatible information for creating symlinks. References: bnc#876344 Signed-off-by: Hannes Reinecke <hare(a)suse.de> --- scripts/55-scsi-sg3_id.rules | 3 ++- src/sg_inq.c | 4 ++++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/scripts/55-scsi-sg3_id.rules b/scripts/55-scsi-sg3_id.rules index 2f99157..ab5a8e3 100644 --- a/scripts/55-scsi-sg3_id.rules +++ b/scripts/55-scsi-sg3_id.rules @@ -25,7 +25,8 @@ ENV{SCSI_IDENT_LUN_NAA}=="?*", ENV{ID_WWN}!="?*", ENV{ID_WWN}="0x$env{SCSI_IDENT ENV{SCSI_IDENT_LUN_NAA}=="?*", ENV{ID_WWN_WITH_EXTENSION}!="?*", ENV{ID_WWN_WITH_EXTENSION}="0x$env{SCSI_IDENT_LUN_NAA}" # ata_id compability -ENV{ID_SERIAL}!="?*", ENV{SCSI_VENDOR}=="ATA", ENV{ID_BUS}="ata", ENV{ID_ATA}="1", ENV{ID_SERIAL}="$env{SCSI_MODEL}_$env{SCSI_IDENT_LUN_VENDOR}" +ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_ATA}=="?*", ENV{ID_BUS}="ata", ENV{ID_ATA}="1", ENV{ID_SERIAL}="$env{SCSI_IDENT_LUN_ATA}" +ENV{ID_SERIAL_SHORT}!="?*", ENV{SCSI_VENDOR}=="ATA", ENV{SCSI_IDENT_LUN_VENDOR}=="?*", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_VENDOR}" # Compat ID_SERIAL setting ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_NAA}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="3$env{SCSI_IDENT_LUN_NAA}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_NAA}" ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_EUI64}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="2$env{SCSI_IDENT_LUN_EUI64}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_EUI64}" diff --git a/src/sg_inq.c b/src/sg_inq.c index bfa4f58..7d8ada5 100644 --- a/src/sg_inq.c +++ b/src/sg_inq.c @@ -1839,6 +1839,10 @@ export_dev_ids(unsigned char * buff, int len) if ((2 == c_set) || (3 == c_set)) { k = encode_whitespaces(ip, i_len); printf("%.*s\n", k, ip); + if (!memcmp(ip, "ATA_", 4)) { + printf("SCSI_IDENT_%s_ATA=%.*s\n", assoc_str, + k - 4, ip + 4); + } } else { for (m = 0; m < i_len; ++m) printf("%02x", (unsigned int)ip[m]); -- 1.7.12.4 ++++++ 0004-sg_inq-suppress-warning-messages-for-export.patch ++++++ >From 880ad9e51b2a2e1f3a8feb0c8e0bb4b5b840a7a3 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke <hare(a)suse.de> Date: Thu, 15 May 2014 12:27:22 +0200 Subject: sg_inq: suppress warning messages for --export When called with --export we should just print out the resulting strings. Printing out warnings in addition just confuses the caller. And if required the warnings can be enabled by specifying --verbose. References: bnc#876454 Signed-off-by: Hannes Reinecke <hare(a)suse.de> --- src/sg_inq.c | 111 +++++++++++++++++++++++++++++++++++++---------------------- 1 file changed, 70 insertions(+), 41 deletions(-) diff --git a/src/sg_inq.c b/src/sg_inq.c index 7d8ada5..473d212 100644 --- a/src/sg_inq.c +++ b/src/sg_inq.c @@ -1767,7 +1767,7 @@ decode_dev_ids(const char * leadin, unsigned char * buff, int len, int do_hex) } static void -export_dev_ids(unsigned char * buff, int len) +export_dev_ids(unsigned char * buff, int len, int verbose) { int u, j, m, id_len, c_set, assoc, desig_type, i_len; int off, d_id, naa, k, p_id; @@ -1797,9 +1797,11 @@ export_dev_ids(unsigned char * buff, int len) i_len = ucp[3]; id_len = i_len + 4; if ((off + id_len) > len) { - pr2serr("Device Identification VPD page error: designator " - "length longer than\n remaining response length=%d\n", - (len - off)); + if (verbose) + pr2serr("Device Identification VPD page error: designator " + "length longer than\n remaining response length=%d\n", + (len - off)); + return; } ip = ucp + 4; @@ -1819,7 +1821,8 @@ export_dev_ids(unsigned char * buff, int len) assoc_str = "TARGET"; break; default: - pr2serr(" Invalid association %d\n", assoc); + if (verbose) + pr2serr(" Invalid association %d\n", assoc); return; } switch (desig_type) { @@ -1851,8 +1854,10 @@ export_dev_ids(unsigned char * buff, int len) break; case 2: /* EUI-64 based */ if (1 != c_set) { - pr2serr(" << expected binary code_set (1)>>\n"); - dStrHexErr((const char *)ip, i_len, 0); + if (verbose) { + pr2serr(" << expected binary code_set (1)>>\n"); + dStrHexErr((const char *)ip, i_len, 0); + } break; } printf("SCSI_IDENT_%s_EUI64=", assoc_str); @@ -1862,21 +1867,27 @@ export_dev_ids(unsigned char * buff, int len) break; case 3: /* NAA */ if (1 != c_set) { - pr2serr(" << expected binary code_set (1)>>\n"); - dStrHexErr((const char *)ip, i_len, 0); + if (verbose) { + pr2serr(" << expected binary code_set (1)>>\n"); + dStrHexErr((const char *)ip, i_len, 0); + } break; } naa = (ip[0] >> 4) & 0xff; if ((naa < 2) || (naa > 6) || (4 == naa)) { - pr2serr(" << unexpected naa [0x%x]>>\n", naa); - dStrHexErr((const char *)ip, i_len, 0); + if (verbose) { + pr2serr(" << unexpected naa [0x%x]>>\n", naa); + dStrHexErr((const char *)ip, i_len, 0); + } break; } if (6 != naa) { if (8 != i_len) { - pr2serr(" << unexpected NAA 2 identifier " - "length: 0x%x>>\n", i_len); - dStrHexErr((const char *)ip, i_len, 0); + if (verbose) { + pr2serr(" << unexpected NAA 2 identifier " + "length: 0x%x>>\n", i_len); + dStrHexErr((const char *)ip, i_len, 0); + } break; } printf("SCSI_IDENT_%s_NAA=", assoc_str); @@ -1885,9 +1896,11 @@ export_dev_ids(unsigned char * buff, int len) printf("\n"); } else { /* NAA IEEE Registered extended */ if (16 != i_len) { - pr2serr(" << unexpected NAA 6 identifier " - "length: 0x%x>>\n", i_len); - dStrHexErr((const char *)ip, i_len, 0); + if (verbose) { + pr2serr(" << unexpected NAA 6 identifier " + "length: 0x%x>>\n", i_len); + dStrHexErr((const char *)ip, i_len, 0); + } break; } printf("SCSI_IDENT_%s_NAA=", assoc_str); @@ -1898,9 +1911,11 @@ export_dev_ids(unsigned char * buff, int len) break; case 4: /* Relative target port */ if ((1 != c_set) || (1 != assoc) || (4 != i_len)) { - pr2serr(" << expected binary code_set, target " - "port association, length 4>>\n"); - dStrHexErr((const char *)ip, i_len, 0); + if (verbose) { + pr2serr(" << expected binary code_set, target " + "port association, length 4>>\n"); + dStrHexErr((const char *)ip, i_len, 0); + } break; } d_id = ((ip[2] << 8) | ip[3]); @@ -1908,9 +1923,11 @@ export_dev_ids(unsigned char * buff, int len) break; case 5: /* (primary) Target port group */ if ((1 != c_set) || (1 != assoc) || (4 != i_len)) { - pr2serr(" << expected binary code_set, target " - "port association, length 4>>\n"); - dStrHexErr((const char *)ip, i_len, 0); + if (verbose) { + pr2serr(" << expected binary code_set, target " + "port association, length 4>>\n"); + dStrHexErr((const char *)ip, i_len, 0); + } break; } d_id = ((ip[2] << 8) | ip[3]); @@ -1918,9 +1935,11 @@ export_dev_ids(unsigned char * buff, int len) break; case 6: /* Logical unit group */ if ((1 != c_set) || (0 != assoc) || (4 != i_len)) { - pr2serr(" << expected binary code_set, logical " - "unit association, length 4>>\n"); - dStrHexErr((const char *)ip, i_len, 0); + if (verbose) { + pr2serr(" << expected binary code_set, logical " + "unit association, length 4>>\n"); + dStrHexErr((const char *)ip, i_len, 0); + } break; } d_id = ((ip[2] << 8) | ip[3]); @@ -1928,9 +1947,11 @@ export_dev_ids(unsigned char * buff, int len) break; case 7: /* MD5 logical unit identifier */ if ((1 != c_set) || (0 != assoc)) { - pr2serr(" << expected binary code_set, logical " - "unit association>>\n"); - dStrHexErr((const char *)ip, i_len, 0); + if (verbose) { + pr2serr(" << expected binary code_set, logical " + "unit association>>\n"); + dStrHexErr((const char *)ip, i_len, 0); + } break; } printf("SCSI_IDENT_%s_MD5=", assoc_str); @@ -1938,8 +1959,10 @@ export_dev_ids(unsigned char * buff, int len) break; case 8: /* SCSI name string */ if (3 != c_set) { - pr2serr(" << expected UTF-8 code_set>>\n"); - dStrHexErr((const char *)ip, i_len, -1); + if (verbose) { + pr2serr(" << expected UTF-8 code_set>>\n"); + dStrHexErr((const char *)ip, i_len, -1); + } break; } printf("SCSI_IDENT_%s_NAME=%.*s\n", assoc_str, i_len, @@ -1948,9 +1971,11 @@ export_dev_ids(unsigned char * buff, int len) case 9: /* Protocol specific port identifier */ if (TPROTO_UAS == p_id) { if ((4 != i_len) || (1 != assoc)) { - pr2serr(" << UAS (USB) expected target " - "port association>>\n"); - dStrHexErr((const char *)ip, i_len, 0); + if (verbose) { + pr2serr(" << UAS (USB) expected target " + "port association>>\n"); + dStrHexErr((const char *)ip, i_len, 0); + } break; } printf("SCSI_IDENT_%s_UAS_DEVICE_ADDRESS=0x%x\n", assoc_str, @@ -1959,9 +1984,11 @@ export_dev_ids(unsigned char * buff, int len) ip[2]); } else if (TPROTO_SOP == p_id) { if ((4 != i_len) && (8 != i_len)) { /* spc4r36h confused */ - pr2serr(" << SOP (PCIe) descriptor " - "length=%d >>\n", i_len); - dStrHexErr((const char *)ip, i_len, 0); + if (verbose) { + pr2serr(" << SOP (PCIe) descriptor " + "length=%d >>\n", i_len); + dStrHexErr((const char *)ip, i_len, 0); + } break; } printf("SCSI_IDENT_%s_SOP_ROUTING_ID=0x%x\n", assoc_str, @@ -1972,12 +1999,14 @@ export_dev_ids(unsigned char * buff, int len) } break; default: /* reserved */ - pr2serr(" reserved designator=0x%x\n", desig_type); - dStrHexErr((const char *)ip, i_len, -1); + if (verbose) { + pr2serr(" reserved designator=0x%x\n", desig_type); + dStrHexErr((const char *)ip, i_len, -1); + } break; } } - if (-2 == u) + if (-2 == u && verbose) pr2serr("Device identification VPD page error: " "around offset=%d\n", off); } @@ -3257,7 +3286,7 @@ vpd_decode(int sg_fd, const struct opts_t * op, int inhex_len) else if (op->do_hex > 2) dStrHex((const char *)rp, len, -1); else if (op->do_export) - export_dev_ids(rp + 4, len - 4); + export_dev_ids(rp + 4, len - 4, op->do_verbose); else decode_id_vpd(rp, len, op->do_hex); break; -- 1.7.12.4 -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit fcoe-utils for openSUSE:Factory
by root＠hilbert.suse.de 23 May '14

23 May '14

Hello community, here is the log from the commit of package fcoe-utils for openSUSE:Factory checked in at 2014-05-23 08:05:14 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/fcoe-utils (Old) and /work/SRC/openSUSE:Factory/.fcoe-utils.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "fcoe-utils" Changes: -------- --- /work/SRC/openSUSE:Factory/fcoe-utils/fcoe-utils.changes 2014-04-23 17:28:15.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.fcoe-utils.new/fcoe-utils.changes 2014-05-23 08:05:18.000000000 +0200 @@ -1,0 +2,20 @@ +Thu May 15 09:15:54 CEST 2014 - hare(a)suse.de + +- Start fcoemon in foreground from service file (bnc#873269) + * Add 0030-fcoe.service-Add-foreground-to-prevent-fcoemon-to-be.patch +- Fixup IEEE state machine + * Add 0031-fcoemon-Fix-IEEE-state-machine.patch +- Fix fipvlan crash during booting (bnc#877275): + * Add 0032-fipvlan-Fix-crash-in-create_and_start_vlan.patch + * Add 0033-fipvlan-suppress-warning-interface-already-exists.patch + * Add 0034-fipvlan-do-not-crash-on-empty-MAC-address-in-lookup_.patch +- Fixup warning messages during booting: + * Add 0035-fipvlan-fixup-return-value-on-error.patch + * Add 0036-fipvlan-clean-up-state-machine-for-pfd_add.patch + +------------------------------------------------------------------- +Fri Apr 11 19:19:33 CEST 2014 - lchiquitto(a)suse.de + +- Remove obsolete file fcoe.config from sources + +------------------------------------------------------------------- Old: ---- fcoe.config New: ---- 0030-fcoe.service-Add-foreground-to-prevent-fcoemon-to-be.patch 0031-fcoemon-Fix-IEEE-state-machine.patch 0032-fipvlan-Fix-crash-in-create_and_start_vlan.patch 0033-fipvlan-suppress-warning-interface-already-exists.patch 0034-fipvlan-do-not-crash-on-empty-MAC-address-in-lookup_.patch 0035-fipvlan-fixup-return-value-on-error.patch 0036-fipvlan-clean-up-state-machine-for-pfd_add.patch ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ fcoe-utils.spec ++++++ --- /var/tmp/diff_new_pack.1723Z1/_old 2014-05-23 08:05:19.000000000 +0200 +++ /var/tmp/diff_new_pack.1723Z1/_new 2014-05-23 08:05:19.000000000 +0200 @@ -69,6 +69,13 @@ # Patches to be upstreamed Patch28: 0028-systemctl-cannot-start-fcoemon.socket.patch Patch29: 0029-fcoemon-Correctly-handle-options-in-the-service-file.patch +Patch30: 0030-fcoe.service-Add-foreground-to-prevent-fcoemon-to-be.patch +Patch31: 0031-fcoemon-Fix-IEEE-state-machine.patch +Patch32: 0032-fipvlan-Fix-crash-in-create_and_start_vlan.patch +Patch33: 0033-fipvlan-suppress-warning-interface-already-exists.patch +Patch34: 0034-fipvlan-do-not-crash-on-empty-MAC-address-in-lookup_.patch +Patch35: 0035-fipvlan-fixup-return-value-on-error.patch +Patch36: 0036-fipvlan-clean-up-state-machine-for-pfd_add.patch # Patches from Fedora Patch101: fcoe-utils-1.0.29-make.patch @@ -110,6 +117,13 @@ %patch27 -p1 %patch28 -p1 %patch29 -p1 +%patch30 -p1 +%patch31 -p1 +%patch32 -p1 +%patch33 -p1 +%patch34 -p1 +%patch35 -p1 +%patch36 -p1 %patch101 -p1 %build ++++++ 0030-fcoe.service-Add-foreground-to-prevent-fcoemon-to-be.patch ++++++ >From 1b7dc959d70679a3536ccbeb6b3a8d0905606537 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke <hare(a)suse.de> Date: Wed, 16 Apr 2014 13:30:47 +0200 Subject: fcoe.service: Add '--foreground' to prevent fcoemon to be killed fcoemon is running as a daemon per default, so when using Type=simple in the service file systemd will kill the fcoemon daemon immediately as it just sees the return code from the first fork() call. References: bnc#873269 Signed-off-by: Hannes Reinecke <hare(a)suse.de> --- etc/systemd/fcoe.service | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/etc/systemd/fcoe.service b/etc/systemd/fcoe.service index 2e10bcd..b1d9567 100644 --- a/etc/systemd/fcoe.service +++ b/etc/systemd/fcoe.service @@ -6,7 +6,7 @@ After=syslog.target network.target Type=simple EnvironmentFile=/etc/fcoe/config ExecStartPre=/sbin/modprobe -qa $SUPPORTED_DRIVERS -ExecStart=/usr/sbin/fcoemon --debug=$DEBUG --syslog=$SYSLOG +ExecStart=/usr/sbin/fcoemon --foreground --debug=$DEBUG --syslog=$SYSLOG [Install] WantedBy=multi-user.target -- 1.7.12.4 ++++++ 0031-fcoemon-Fix-IEEE-state-machine.patch ++++++ >From 95f4a92799627e791dc68eb49922f169409b5cd8 Mon Sep 17 00:00:00 2001 From: Neerav Parikh <neerav.parikh(a)intel.com> Date: Tue, 18 Mar 2014 08:34:18 +0000 Subject: fcoemon: Fix IEEE state machine fcoemon on adapters that support only IEEE DCBX mode doesn't enter into a state where it can proceed doing FIP VLAN discovery or creating an FCoE instance. This is because the current IEEE state machine is tied with the CEE based state machine. It relies on some CEE specific DCB netlink calls viz. getstate() to proceed; which may not be available on drivers that only support IEEE specific DCBNL calls. Hence, this patch aims to separate out the IEEE DCBX mode specific state machine from the CEE one. Signed-off-by: Neerav Parikh <neerav.parikh(a)intel.com> Tested-by: Jack Morgan<jack.morgan(a)intel.com> --- fcoemon.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 48 insertions(+), 6 deletions(-) diff --git a/fcoemon.c b/fcoemon.c index 23fc2f6..3ab1a98 100644 --- a/fcoemon.c +++ b/fcoemon.c @@ -1357,12 +1357,8 @@ ieee_state_set(struct fcm_netif *ff, enum ieee_state new_state) getstr(&ieee_states, new_state)); } - if (new_state == IEEE_GET_STATE) { - ff->ieee_state = new_state; + if (new_state == IEEE_GET_STATE) clear_ieee_info(ff); - ieee_get_req(ff); - return; - } ff->ieee_state = new_state; ff->ieee_resp_pending = 0; @@ -3035,6 +3031,50 @@ static void fcm_fcoe_action(struct fcoe_port *p) /* * Called for all ports. For FCoE ports and candidates, + * get IEEE DCBX information and set the next action. + */ +static void fcm_netif_ieee_advance(struct fcm_netif *ff) +{ + enum fcp_action action; + + ASSERT(ff); + ASSERT(fcm_clif); + + if (fcm_clif->cl_busy) + return; + + if (ff->ieee_resp_pending) + return; + + switch (ff->ieee_state) { + case IEEE_INIT: + break; + case IEEE_GET_STATE: + ieee_get_req(ff); + break; + case IEEE_DONE: + action = validate_ieee_info(ff); + switch (action) { + case FCP_DESTROY_IF: + case FCP_ENABLE_IF: + case FCP_ACTIVATE_IF: + fcp_action_set(ff->ifname, action); + break; + case FCP_DISABLE_IF: + case FCP_ERROR: + fcp_action_set(ff->ifname, FCP_DISABLE_IF); + break; + case FCP_WAIT: + default: + break; + } + default: + break; + } +} + +/* + * Called for all ports. For FCoE ports and candidates, * get information and send to dcbd. */ static void fcm_netif_advance(struct fcm_netif *ff) @@ -3161,8 +3201,10 @@ static void fcm_handle_changes(void) /* * Perform pending actions (dcbd queries) on network interfaces. */ - TAILQ_FOREACH(ff, &fcm_netif_head, ff_list) + TAILQ_FOREACH(ff, &fcm_netif_head, ff_list) { fcm_netif_advance(ff); + fcm_netif_ieee_advance(ff); + } /* * Perform actions on FCoE ports -- 1.7.12.4 ++++++ 0032-fipvlan-Fix-crash-in-create_and_start_vlan.patch ++++++ >From 0d006642c34e360fb7d3c3adbbb1295e784c03bf Mon Sep 17 00:00:00 2001 From: Hannes Reinecke <hare(a)suse.de> Date: Mon, 12 May 2014 14:55:50 +0200 Subject: fipvlan: Fix crash in create_and_start_vlan() create_and_start_vlan() will issue a netlink command to create a new VLAN device. As this device isn't present yet we need to exit here and retry the vlan configuration once we get the appropriate message from netlink. References: bnc#877275 Signed-off-by: Hannes Reinecke <hare(a)suse.de> --- fipvlan.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/fipvlan.c b/fipvlan.c index cc71412..7202f03 100644 --- a/fipvlan.c +++ b/fipvlan.c @@ -626,20 +626,21 @@ create_and_start_vlan(struct fcf *fcf, bool vn2vn) vlan = real_dev; } else { vlan = lookup_vlan(fcf->ifindex, fcf->vlan); - if (vlan) { - FIP_LOG_DBG("VLAN %s.%d already exists as %s\n", - real_dev->ifname, fcf->vlan, vlan->ifname); + if (!vlan) { + snprintf(vlan_name, IFNAMSIZ, "%s.%d%s", + real_dev->ifname, fcf->vlan, config.suffix); + rc = vlan_create(fcf->ifindex, fcf->vlan, vlan_name); + if (rc < 0) { + printf("Failed to create VLAN device %s\n" + "\t%s\n", + vlan_name, strerror(-rc)); + return rc; + } + printf("Created VLAN device %s\n", vlan_name); return 0; } - snprintf(vlan_name, IFNAMSIZ, "%s.%d%s", - real_dev->ifname, fcf->vlan, config.suffix); - rc = vlan_create(fcf->ifindex, fcf->vlan, vlan_name); - if (rc < 0) { - printf("Failed to create VLAN device %s\n\t%s\n", - vlan_name, strerror(-rc)); - return rc; - } - printf("Created VLAN device %s\n", vlan_name); + FIP_LOG_DBG("VLAN %s.%d already exists as %s\n", + real_dev->ifname, fcf->vlan, vlan->ifname); } if (!config.start) return rc; -- 1.7.12.4 ++++++ 0033-fipvlan-suppress-warning-interface-already-exists.patch ++++++ >From 798a5ff4a205fa26d37447ff77fc27861103440a Mon Sep 17 00:00:00 2001 From: Hannes Reinecke <hare(a)suse.de> Date: Mon, 12 May 2014 14:59:13 +0200 Subject: fipvlan: suppress warning 'interface already exists' When fipvlan is called for just the parent interface we should not select the vlan interface, too, otherwise we'll be getting those annoying warning messages. Signed-off-by: Hannes Reinecke <hare(a)suse.de> --- fipvlan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fipvlan.c b/fipvlan.c index 7202f03..163d21e 100644 --- a/fipvlan.c +++ b/fipvlan.c @@ -451,7 +451,8 @@ static void rtnl_recv_newlink(struct nlmsghdr *nh) int i, iff_selected = 0; for (i = 0; i < config.namec; i++) { - if (!strcmp(iff->ifname, config.namev[i])) + if (!strncmp(iff->ifname, config.namev[i], + strlen(config.namev[i]))) iff_selected = 1; } if (!iff_selected) { -- 1.7.12.4 ++++++ 0034-fipvlan-do-not-crash-on-empty-MAC-address-in-lookup_.patch ++++++ >From eb7451d0dcffb1c247e2b070b6101c2c878faee4 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke <hare(a)suse.de> Date: Mon, 12 May 2014 15:24:48 +0200 Subject: fipvlan: do not crash on empty MAC address in lookup_fcf() We're calling lookup_fcf() with a NULL macaddress, so we need to ensure we don't crash here. References: bnc#877275 Signed-off-by: Hannes Reinecke <hare(a)suse.de> --- fipvlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fipvlan.c b/fipvlan.c index 163d21e..c5f3d3f 100644 --- a/fipvlan.c +++ b/fipvlan.c @@ -169,7 +169,7 @@ static struct fcf *lookup_fcf(struct fcf_list_head *head, int ifindex, TAILQ_FOREACH(fcf, head, list_node) if ((ifindex == fcf->ifindex) && (vlan == fcf->vlan) && - (memcmp(mac, fcf->mac_addr, ETHER_ADDR_LEN) == 0)) + (!mac || memcmp(mac, fcf->mac_addr, ETHER_ADDR_LEN) == 0)) return fcf; return NULL; } -- 1.7.12.4 ++++++ 0035-fipvlan-fixup-return-value-on-error.patch ++++++ >From 16765b7b091f8130ae001af7693895ffe0886a0e Mon Sep 17 00:00:00 2001 From: Hannes Reinecke <hare(a)suse.de> Date: Tue, 13 May 2014 09:44:17 +0200 Subject: fipvlan: fixup return value on error fipvlan should return 1 on error or ENODEV (=19) if no interfaces were found. Signed-off-by: Hannes Reinecke <hare(a)suse.de> --- fipvlan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fipvlan.c b/fipvlan.c index c5f3d3f..3300c68 100644 --- a/fipvlan.c +++ b/fipvlan.c @@ -982,7 +982,7 @@ int main(int argc, char **argv) ns = rtnl_socket(); if (ns < 0) { - rc = ns; + rc = 1; goto ns_err; } pfd_add(ns); @@ -1002,7 +1002,7 @@ int main(int argc, char **argv) "no interfaces to perform discovery on"); else FIP_LOG("no interfaces to perform discovery on"); - exit(1); + exit(ENODEV); } do_vlan_discovery(); -- 1.7.12.4 ++++++ 0036-fipvlan-clean-up-state-machine-for-pfd_add.patch ++++++ >From b19353bfa3186334611109456b232e596335c15e Mon Sep 17 00:00:00 2001 From: Hannes Reinecke <hare(a)suse.de> Date: Wed, 14 May 2014 16:01:10 +0200 Subject: fipvlan: clean up state machine for pfd_add pfd_add just adds the fd to the internal list without any checking. So use the 'fip_ready' flag to track this. Signed-off-by: Hannes Reinecke <hare(a)suse.de> --- fipvlan.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/fipvlan.c b/fipvlan.c index 3300c68..2211fd1 100644 --- a/fipvlan.c +++ b/fipvlan.c @@ -397,10 +397,17 @@ static void rtnl_recv_newlink(struct nlmsghdr *nh) /* already tracking, update operstate and return */ iff->running = running; if (!iff->running) { - pfd_remove(iff->ps); + if (iff->fip_ready) { + pfd_remove(iff->ps); + iff->fip_ready = false; + } return; } - pfd_add(iff->ps); + if (iff->ps >= 0 && !iff->fip_ready) { + pfd_add(iff->ps); + iff->fip_ready = true; + } + if (!config.start) return; @@ -440,6 +447,7 @@ static void rtnl_recv_newlink(struct nlmsghdr *nh) iff->ifindex = ifm->ifi_index; iff->running = running; iff->fip_ready = false; + iff->ps = -1; if (ifla[IFLA_LINK]) iff->iflink = *(int *)RTA_DATA(ifla[IFLA_LINK]); else @@ -827,7 +835,8 @@ static int probe_fip_interface(struct iff *iff) if (iff->req_sent) return 0; - if (!iff->fip_ready) { + if (iff->ps < 0) { + iff->fip_ready = false; iff->ps = fip_socket(iff->ifindex, FIP_NONE); if (iff->ps < 0) { FIP_LOG_DBG("if %d not ready\n", iff->ifindex); @@ -835,6 +844,8 @@ static int probe_fip_interface(struct iff *iff) } setsockopt(iff->ps, SOL_PACKET, PACKET_ORIGDEV, &origdev, sizeof(origdev)); + } + if (!iff->fip_ready) { pfd_add(iff->ps); iff->fip_ready = true; } -- 1.7.12.4 -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit lvm2 for openSUSE:Factory
by root＠hilbert.suse.de 23 May '14

23 May '14

Hello community, here is the log from the commit of package lvm2 for openSUSE:Factory checked in at 2014-05-23 08:05:13 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/lvm2 (Old) and /work/SRC/openSUSE:Factory/.lvm2.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "lvm2" Changes: -------- --- /work/SRC/openSUSE:Factory/lvm2/lvm2.changes 2014-04-26 17:01:51.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.lvm2.new/lvm2.changes 2014-05-23 08:05:15.000000000 +0200 @@ -1,0 +2,5 @@ +Mon May 12 08:11:08 UTC 2014 - lwang(a)suse.com + +-bnc#871176, 0001-RAID-Make-RAID-4-5-6-display-sync-status-under-headi.patch + +------------------------------------------------------------------- New: ---- 0001-RAID-Make-RAID-4-5-6-display-sync-status-under-headi.patch ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ lvm2.spec ++++++ --- /var/tmp/diff_new_pack.tliayr/_old 2014-05-23 08:05:17.000000000 +0200 +++ /var/tmp/diff_new_pack.tliayr/_new 2014-05-23 08:05:17.000000000 +0200 @@ -100,6 +100,10 @@ # Never upstream Patch90: cmirrord_remove_date_time_from_compilation.patch + +#upstream, bnc#871176 +Patch91: 0001-RAID-Make-RAID-4-5-6-display-sync-status-under-headi.patch + BuildRoot: %{_tmppath}/%{name}-%{version}-build # Not a real replacement but we drop evms Provides: evms = 2.5.5 @@ -154,6 +158,7 @@ %patch88 -p1 %patch89 -p1 %patch90 -p1 +%patch91 -p1 %build #set path so that thin_check can be found ++++++ 0001-RAID-Make-RAID-4-5-6-display-sync-status-under-headi.patch ++++++ >From e1917809477c4850cc1094121001d61a2b70ef26 Mon Sep 17 00:00:00 2001 From: Jonathan Brassow <jbrassow(a)redhat.com> Date: Tue, 23 Oct 2012 21:19:27 -0500 Subject: [PATCH 1/1] RAID: Make RAID 4/5/6 display sync status under heading s/Copy%/Cpy%Sync The heading 'Copy%' is specific to PVMOVE volumes, but can be generalized to apply to LVM mirrors also. It is a bit awkward to use 'Copy%' for RAID 4/5/6, however - 'Sync%' would be more appropriate. This is why RAID 4/5/6 have not displayed their sync status by any means available to 'lvs' yet. Example (old): [root@hayes-02 lvm2]# lvs vg LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sy Convert lv vg -wi-a---- 1.00g raid1 vg rwi-a-r-- 1.00g 100.00 raid4 vg rwi-a-r-- 1.01g raid5 vg rwi-a-r-- 1.01g raid6 vg rwi-a-r-- 1.01g This patch changes the heading to 'Cpy%Sync' and allows RAID 4/5/6 to print their sync percent in this field. Example (new): [root@hayes-02 lvm2]# lvs vg LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sync Convert lv vg -wi-a---- 1.00g raid1 vg rwi-a-r-- 1.00g 100.00 raid4 vg rwi-a-r-- 1.01g 100.00 raid5 vg rwi-a-r-- 1.01g 100.00 raid6 vg rwi-a-r-- 1.01g 100.00 --- lib/report/columns.h | 3 ++- lib/report/properties.c | 2 ++ lib/report/report.c | 20 +++++++++++++------- man/lvs.8.in | 1 + 4 files changed, 18 insertions(+), 8 deletions(-) diff --git a/lib/report/columns.h b/lib/report/columns.h index 6299a2b..c83a086 100644 --- a/lib/report/columns.h +++ b/lib/report/columns.h @@ -78,7 +78,8 @@ FIELD(LVS, lv, NUM, "OSize", lvid, 5, originsize, origin_size, "For snapshots, t FIELD(LVS, lv, NUM, "Data%", lvid, 6, datapercent, data_percent, "For snapshot and thin pools and volumes, the percentage full if LV is active.", 0) FIELD(LVS, lv, NUM, "Snap%", lvid, 6, snpercent, snap_percent, "For snapshots, the percentage full if LV is active.", 0) FIELD(LVS, lv, NUM, "Meta%", lvid, 6, metadatapercent, metadata_percent, "For thin pools, the percentage of metadata full if LV is active.", 0) -FIELD(LVS, lv, NUM, "Copy%", lvid, 6, copypercent, copy_percent, "For mirrors and pvmove, current percentage in-sync.", 0) +FIELD(LVS, lv, NUM, "Cpy%Sync", lvid, 8, copypercent, copy_percent, "For RAID, mirrors and pvmove, current percentage in-sync.", 0) +FIELD(LVS, lv, NUM, "Cpy%Sync", lvid, 8, copypercent, sync_percent, "For RAID, mirrors and pvmove, current percentage in-sync.", 0) FIELD(LVS, lv, STR, "Move", lvid, 4, movepv, move_pv, "For pvmove, Source PV of temporary LV created by pvmove.", 0) FIELD(LVS, lv, STR, "Convert", lvid, 7, convertlv, convert_lv, "For lvconvert, Name of temporary LV created by lvconvert.", 0) FIELD(LVS, lv, STR, "Log", lvid, 3, loglv, mirror_log, "For mirrors, the LV holding the synchronisation log.", 0) diff --git a/lib/report/properties.c b/lib/report/properties.c index c4f6ab9..fe197f5 100644 --- a/lib/report/properties.c +++ b/lib/report/properties.c @@ -189,6 +189,8 @@ GET_LV_NUM_PROPERTY_FN(snap_percent, _snap_percent(lv)) #define _snap_percent_set _not_implemented_set GET_LV_NUM_PROPERTY_FN(copy_percent, _copy_percent(lv)) #define _copy_percent_set _not_implemented_set +GET_LV_NUM_PROPERTY_FN(sync_percent, _copy_percent(lv)) +#define _sync_percent_set _not_implemented_set GET_LV_STR_PROPERTY_FN(move_pv, lv_move_pv_dup(lv->vg->vgmem, lv)) #define _move_pv_set _not_implemented_set GET_LV_STR_PROPERTY_FN(convert_lv, lv_convert_lv_dup(lv->vg->vgmem, lv)) diff --git a/lib/report/report.c b/lib/report/report.c index b1e2bc1..1833458 100644 --- a/lib/report/report.c +++ b/lib/report/report.c @@ -898,13 +898,14 @@ static int _copypercent_disp(struct dm_report *rh __attribute__((unused)), return 0; } - if ((!(lv->status & PVMOVE) && !(lv->status & MIRRORED)) || - !lv_mirror_percent(lv->vg->cmd, lv, 0, &percent, - NULL) || (percent == PERCENT_INVALID)) { - *sortval = UINT64_C(0); - dm_report_field_set_value(field, "", sortval); - return 1; - } + if (lv->status & RAID) { + if (!lv_raid_percent(lv, &percent) || + (percent == PERCENT_INVALID)) + goto no_copypercent; + } else if ((!(lv->status & PVMOVE) && !(lv->status & MIRRORED)) || + !lv_mirror_percent(lv->vg->cmd, lv, 0, &percent, NULL) || + (percent == PERCENT_INVALID)) + goto no_copypercent; percent = copy_percent(lv); @@ -922,6 +923,11 @@ static int _copypercent_disp(struct dm_report *rh __attribute__((unused)), dm_report_field_set_value(field, repstr, sortval); return 1; + +no_copypercent: + *sortval = UINT64_C(0); + dm_report_field_set_value(field, "", sortval); + return 1; } static int _dtpercent_disp(int metadata, struct dm_report *rh, diff --git a/man/lvs.8.in b/man/lvs.8.in index f31256c..d4d77b0 100644 --- a/man/lvs.8.in +++ b/man/lvs.8.in @@ -113,6 +113,7 @@ seg_tags, snap_percent, stripes, stripe_size, +sync_percent, thin_count, transaction_id, zero. -- 1.9.0 -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit ipvsadm for openSUSE:Factory
by root＠hilbert.suse.de 23 May '14

23 May '14

Hello community, here is the log from the commit of package ipvsadm for openSUSE:Factory checked in at 2014-05-23 07:51:47 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/ipvsadm (Old) and /work/SRC/openSUSE:Factory/.ipvsadm.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "ipvsadm" Changes: -------- --- /work/SRC/openSUSE:Factory/ipvsadm/ipvsadm.changes 2014-02-15 08:05:17.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.ipvsadm.new/ipvsadm.changes 2014-05-23 07:51:47.000000000 +0200 @@ -1,0 +2,5 @@ +Wed May 21 11:08:18 UTC 2014 - jsegitz(a)novell.com + +- added necessary macros for systemd files + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ ipvsadm.spec ++++++ --- /var/tmp/diff_new_pack.CPY8TD/_old 2014-05-23 07:51:48.000000000 +0200 +++ /var/tmp/diff_new_pack.CPY8TD/_new 2014-05-23 07:51:48.000000000 +0200 @@ -92,6 +92,12 @@ %postun %service_del_postun ipvsadm.service +%pre +%service_add_pre ipvsadm.service + +%preun +%service_del_preun ipvsadm.service + %files %defattr(-,root,root) %doc README -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit gperftools for openSUSE:Factory
by root＠hilbert.suse.de 23 May '14

23 May '14

Hello community, here is the log from the commit of package gperftools for openSUSE:Factory checked in at 2014-05-23 07:51:41 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/gperftools (Old) and /work/SRC/openSUSE:Factory/.gperftools.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "gperftools" Changes: -------- --- /work/SRC/openSUSE:Factory/gperftools/gperftools.changes 2013-08-13 12:53:38.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.gperftools.new/gperftools.changes 2014-05-23 07:51:42.000000000 +0200 @@ -1,0 +2,58 @@ +Mon May 19 15:39:40 UTC 2014 - cgardner(a)suse.com + +- gperftools 2.2, released 3 May 2014. + * issue 620 (crash on windows when c runtime dll is reloaded) was + fixed + * a number of fixes for a number compilers and platforms. Notably + Visual Studio 2013, recent mingw with c++ threads and some OSX + fixes. + * we now have mips and mips64 support! (courtesy of Jovan Zelincevic, + Jean Lee, user xiaoyur347 and others) + * we now have aarch64 (aka arm64) support! (contributed by Riku + Voipio) + * there's now support for ppc64-le (by Raphael Moreira Zinsly and + Adhemerval Zanella) + * there's now some support of uclibc (contributed by user xiaoyur347) + * google/ headers will now give you deprecation warning. They are + deprecated since 2.0 + * there's now new api: tc_malloc_skip_new_handler (ported from chromium + fork) + * issue-557: added support for dumping heap profile via signal (by + Jean Lee) + * issue-567: Petr Hosek contributed SysAllocator support for windows + * Joonsoo Kim contributed several speedups for central freelist code + * TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES environment variable now works + * configure scripts are now using AM_MAINTAINER_MODE. It'll only + affect folks who modify source from .tar.gz and want automake to + automatically rebuild Makefile-s. See automake documentation for + that. + * issue-586: detect main executable even if PIE is active (based on + patch by user themastermind1). Notably, it fixes profiler use with + ruby. + * there is now support for switching backtrace capturing method at + runtime (via TCMALLOC_STACKTRACE_METHOD and + TCMALLOC_STACKTRACE_METHOD_VERBOSE environment variables) + * there is new backtrace capturing method using -finstrument-functions + prologues contributed by user xiaoyur347 + * few cases of crashes/deadlocks in profiler were addressed. See + (famous) issue-66, issue-547 and issue-579. + * issue-464 (memory corruption in debugalloc's realloc after + memallign) is now fixed + * tcmalloc is now able to release memory back to OS on windows + (issue-489). The code was ported from chromium fork (by a number of + authors). + * Together with issue-489 we ported chromium's "aggressive decommit" + mode. In this mode (settable via malloc extension and via + environment variable TCMALLOC_AGGRESSIVE_DECOMMIT), free pages are + returned back to OS immediately. + * MallocExtension::instance() is now faster (based on patch by + Adhemerval Zanella) + * issue-610 (hangs on windows in multibyte locales) is now fixed +- Removed the following patches. All have either been incorporated + upstream or are no longer applicable in current distros. + * gperftools_fix_multiple_install_headers.patch + * gperftools-glibc216.patch + * spinlock-rand.patch + * gperftools_use_older_autoconf.diff + +------------------------------------------------------------------- Old: ---- gperftools-2.1.tar.bz2 gperftools-glibc216.patch gperftools_fix_multiple_install_headers.patch gperftools_use_older_autoconf.diff spinlock-rand.patch New: ---- gperftools-2.2.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ gperftools.spec ++++++ --- /var/tmp/diff_new_pack.6fyEey/_old 2014-05-23 07:51:43.000000000 +0200 +++ /var/tmp/diff_new_pack.6fyEey/_new 2014-05-23 07:51:43.000000000 +0200 @@ -17,17 +17,13 @@ Name: gperftools -Version: 2.1 +Version: 2.2 Release: 0 Url: http://code.google.com/p/gperftools/ -Source0: %{name}-%{version}.tar.bz2 +Source0: %{name}-%{version}.tar.gz Patch4: %{name}-fix_docdir.patch -# Patch11: %{name}_fix_multiple_install_headers.patch Patch12: %{name}_fix_unassigned_malloc_in_unittest.patch Patch14: %{name}_gcc46.patch -#Patch15: %{name}-glibc216.patch -#Patch16: spinlock-rand.patch -Patch17: %{name}_use_older_autoconf.diff BuildRequires: autoconf BuildRequires: automake BuildRequires: gcc-c++ @@ -65,12 +61,8 @@ %prep %setup -q %patch4 -p1 -#patch11 -p1 %patch12 -p1 %patch14 -p1 -#patch15 -p1 -#patch16 -p1 -%patch17 -p1 %build autoreconf -fi -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit crmsh for openSUSE:Factory
by root＠hilbert.suse.de 23 May '14

23 May '14

Hello community, here is the log from the commit of package crmsh for openSUSE:Factory checked in at 2014-05-23 07:51:34 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/crmsh (Old) and /work/SRC/openSUSE:Factory/.crmsh.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "crmsh" Changes: -------- --- /work/SRC/openSUSE:Factory/crmsh/crmsh.changes 2014-05-17 21:43:25.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.crmsh.new/crmsh.changes 2014-05-23 07:51:35.000000000 +0200 @@ -1,0 +2,7 @@ +Thu May 22 17:05:53 UTC 2014 - kgronlund(a)suse.com + +- medium: xmlutil: Limit xpath search to children (bnc#879419) +- medium: ui: Fix argument check in resource commands (gh#crmsh/crmsh#29) +- upstream: 2.0.0-88-g598dfd4 + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ crmsh.spec ++++++ --- /var/tmp/diff_new_pack.1XvZmQ/_old 2014-05-23 07:51:36.000000000 +0200 +++ /var/tmp/diff_new_pack.1XvZmQ/_new 2014-05-23 07:51:36.000000000 +0200 @@ -41,7 +41,7 @@ Summary: High Availability cluster command-line interface License: GPL-2.0+ Group: %{pkg_group} -Version: 2.0+git85 +Version: 2.0+git88 Release: %{?crmsh_release}%{?dist} Url: http://crmsh.github.io Source0: crmsh.tar.bz2 ++++++ crmsh.tar.bz2 ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/crmsh/modules/ui_node.py new/crmsh/modules/ui_node.py --- old/crmsh/modules/ui_node.py 2014-05-16 13:20:50.000000000 +0200 +++ new/crmsh/modules/ui_node.py 2014-05-22 19:04:46.000000000 +0200 @@ -168,10 +168,9 @@ if not argl: node = utils.this_node() elif len(argl) == 1: - if xmlutil.is_our_node(args[0]): - node = args[0] - else: - common_err("%s: node name not recognized" % args[0]) + node = args[0] + if not xmlutil.is_our_node(node): + common_err("%s: node name not recognized" % node) return False else: syntax_err(args, context=context.get_command_name()) @@ -289,31 +288,34 @@ @command.wait @command.completers(compl.nodes, compl.choice(['set', 'delete', 'show']), compl.resources) - def do_attribute(self, context, *args): + def do_attribute(self, context, node, cmd, rsc, value=None): """usage: attribute <node> set <rsc> <value> attribute <node> delete <rsc> attribute <node> show <rsc>""" - return ui_utils.manage_attr(context.get_command_name(), self.node_attr, args) + return ui_utils.manage_attr(context.get_command_name(), self.node_attr, + node, cmd, rsc, value) @command.wait @command.completers(compl.nodes, compl.choice(['set', 'delete', 'show']), compl.resources) - def do_utilization(self, context, *args): + def do_utilization(self, context, node, cmd, rsc, value=None): """usage: utilization <node> set <rsc> <value> utilization <node> delete <rsc> utilization <node> show <rsc>""" - return ui_utils.manage_attr(context.get_command_name(), self.node_utilization, args) + return ui_utils.manage_attr(context.get_command_name(), self.node_utilization, + node, cmd, rsc, value) @command.wait @command.name('status-attr') @command.completers(compl.nodes, compl.choice(['set', 'delete', 'show']), compl.resources) - def do_status_attr(self, context, *args): + def do_status_attr(self, context, node, cmd, rsc, value=None): """usage: status-attr <node> set <rsc> <value> status-attr <node> delete <rsc> status-attr <node> show <rsc>""" - return ui_utils.manage_attr(context.get_command_name(), self.node_status, args) + return ui_utils.manage_attr(context.get_command_name(), self.node_status, + node, cmd, rsc, value) # vim:ts=4:sw=4:et: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/crmsh/modules/ui_resource.py new/crmsh/modules/ui_resource.py --- old/crmsh/modules/ui_resource.py 2014-05-16 13:20:50.000000000 +0200 +++ new/crmsh/modules/ui_resource.py 2014-05-22 19:04:46.000000000 +0200 @@ -312,28 +312,25 @@ @command.alias('move') @command.skill_level('administrator') @command.completers_repeating(compl.resources, compl.nodes, - compl.choice(['lifetime', 'force'])) - def do_migrate(self, context, *args): + compl.choice(['reboot', 'forever', 'force'])) + def do_migrate(self, context, rsc, *args): """usage: migrate <rsc> [<node>] [<lifetime>] [force]""" - argl = list(args) - rsc = argl[0] if not utils.is_name_sane(rsc): return False - del argl[0] node = None - opt_l = utils.fetch_opts(argl, ["force"]) + argl = list(args) + force = "force" in utils.fetch_opts(argl, ["force"]) lifetime = utils.fetch_lifetime_opt(argl) - if len(argl) == 1: - if xmlutil.is_our_node(argl[0]): - node = argl[0] - else: - context.fatal_error("Not our node: " + argl[0]) + if len(argl) > 0: + node = argl[0] + if not xmlutil.is_our_node(node): + context.fatal_error("Not our node: " + node) opts = '' if node: opts = "--node='%s'" % node if lifetime: opts = "%s --lifetime='%s'" % (opts, lifetime) - if "force" in opt_l or config.core.force: + if force or config.core.force: opts = "%s --force" % opts return utils.ext_cmd(self.rsc_migrate % (rsc, opts)) == 0 @@ -356,28 +353,30 @@ return cleanup_resource(resource, node) @command.completers(compl.resources, _attrcmds, compl.nodes) - def do_failcount(self, context, *args): + def do_failcount(self, context, rsc, cmd, node, value=None): """usage: failcount <rsc> set <node> <value> failcount <rsc> delete <node> failcount <rsc> show <node>""" - return ui_utils.manage_attr(context.get_command_name(), self.rsc_failcount, args) + return ui_utils.manage_attr(context.get_command_name(), self.rsc_failcount, + rsc, cmd, node, value) @command.skill_level('administrator') @command.wait @command.completers(compl.resources, _attrcmds) - def do_param(self, context, *args): + def do_param(self, context, rsc, cmd, param, value=None): """usage: param <rsc> set <param> <value> param <rsc> delete <param> param <rsc> show <param>""" - return ui_utils.manage_attr(context.get_command_name(), self.rsc_param, args) + return ui_utils.manage_attr(context.get_command_name(), self.rsc_param, + rsc, cmd, param, value) @command.skill_level('administrator') @command.wait @command.completers(compl.resources, compl.choice(['set', 'stash', 'unstash', 'delete', 'show', 'check'])) - def do_secret(self, context, *args): + def do_secret(self, context, rsc, cmd, param, value=None): """usage: secret <rsc> set <param> <value> secret <rsc> stash <param> @@ -385,27 +384,30 @@ secret <rsc> delete <param> secret <rsc> show <param> secret <rsc> check <param>""" - return ui_utils.manage_attr(context.get_command_name(), self.rsc_secret, args) + return ui_utils.manage_attr(context.get_command_name(), self.rsc_secret, + rsc, cmd, param, value) @command.skill_level('administrator') @command.wait @command.completers(compl.resources, _attrcmds) - def do_meta(self, context, *args): + def do_meta(self, context, rsc, cmd, attr, value=None): """usage: meta <rsc> set <attr> <value> meta <rsc> delete <attr> meta <rsc> show <attr>""" - return ui_utils.manage_attr(context.get_command_name(), self.rsc_meta, args) + return ui_utils.manage_attr(context.get_command_name(), self.rsc_meta, + rsc, cmd, attr, value) @command.skill_level('administrator') @command.wait @command.completers(compl.resources, _attrcmds) - def do_utilization(self, context, *args): + def do_utilization(self, context, rsc, cmd, attr, value=None): """usage: utilization <rsc> set <attr> <value> utilization <rsc> delete <attr> utilization <rsc> show <attr>""" - return ui_utils.manage_attr(context.get_command_name(), self.rsc_utilization, args) + return ui_utils.manage_attr(context.get_command_name(), self.rsc_utilization, + rsc, cmd, attr, value) @command.completers(compl.nodes) def do_refresh(self, context, *args): diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/crmsh/modules/ui_utils.py new/crmsh/modules/ui_utils.py --- old/crmsh/modules/ui_utils.py 2014-05-16 13:20:50.000000000 +0200 +++ new/crmsh/modules/ui_utils.py 2014-05-22 19:04:46.000000000 +0200 @@ -22,9 +22,10 @@ import utils -def _get_attr_cmd(attr_ext_commands, args): +def _get_attr_cmd(attr_ext_commands, subcmd): + attr_ext_commands try: - attr_cmd = attr_ext_commands[args[1]] + attr_cmd = attr_ext_commands[subcmd] if attr_cmd: return attr_cmd except KeyError, msg: @@ -32,38 +33,39 @@ raise ValueError("Bad attr_cmd " + repr(attr_ext_commands)) -def _dispatch_attr_cmd(cmd, attr_cmd, args): - if args[1] == 'set': - if len(args) != 4: - raise ValueError("Expected 4 arguments to 'set'") - if not utils.is_name_sane(args[0]) \ - or not utils.is_name_sane(args[2]) \ - or not utils.is_value_sane(args[3]): - raise ValueError("Argument failed sanity check") - return utils.ext_cmd(attr_cmd % (args[0], args[2], args[3])) == 0 - elif args[1] in ('delete', 'show') or \ - (cmd == "secret" and args[1] in ('stash', 'unstash', 'check')): - if len(args) != 3: - raise ValueError("Expected 3 arguments to " + args[1]) - if not utils.is_name_sane(args[0]) \ - or not utils.is_name_sane(args[2]): - raise ValueError("Argument failed sanity check") - return utils.ext_cmd(attr_cmd % (args[0], args[2])) == 0 - raise ValueError("Unknown command " + repr(args[1])) +def _dispatch_attr_cmd(cmd, attr_cmd, rsc, subcmd, attr, value): + def sanity_check(arg): + if not utils.is_name_sane(arg): + raise ValueError("Expected valid name, got '%s'" % (arg)) + if subcmd == 'set': + if value is None: + raise ValueError("Missing value argument to set") + sanity_check(rsc) + sanity_check(attr) + sanity_check(value) + return utils.ext_cmd(attr_cmd % (rsc, attr, value)) == 0 + elif subcmd in ('delete', 'show') or \ + (cmd == "secret" and subcmd in ('stash', 'unstash', 'check')): + if value is not None: + raise ValueError("Too many arguments to %s" % (subcmd)) + sanity_check(rsc) + sanity_check(attr) + return utils.ext_cmd(attr_cmd % (rsc, attr)) == 0 + raise ValueError("Unknown command " + repr(subcmd)) -def manage_attr(cmd, attr_ext_commands, args): +def manage_attr(cmd, attr_ext_commands, rsc, subcmd, attr, value): ''' TODO: describe. ''' - if len(args) < 3: - bad_usage(cmd, ' '.join(args), "Too few arguments") - return False try: - attr_cmd = _get_attr_cmd(attr_ext_commands, args) - return _dispatch_attr_cmd(cmd, attr_cmd, args) + attr_cmd = _get_attr_cmd(attr_ext_commands, subcmd) + return _dispatch_attr_cmd(cmd, attr_cmd, rsc, subcmd, attr, value) except ValueError, msg: - bad_usage(cmd, ' '.join(args), msg) + cmdline = [rsc, subcmd, attr] + if value is not None: + cmdline.append(value) + bad_usage(cmd, ' '.join(cmdline), msg) return False diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/crmsh/modules/xmlutil.py new/crmsh/modules/xmlutil.py --- old/crmsh/modules/xmlutil.py 2014-05-16 13:20:50.000000000 +0200 +++ new/crmsh/modules/xmlutil.py 2014-05-22 19:04:46.000000000 +0200 @@ -777,7 +777,7 @@ def get_rsc_operations(rsc_node): - actions = [op2list(op) for op in rsc_node.xpath('//operations/op')] + actions = [op2list(op) for op in rsc_node.xpath('.//operations/op')] actions = [[op, pl] for op, pl in actions if op] return actions diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/crmsh/test/testcases/confbasic.exp new/crmsh/test/testcases/confbasic.exp --- old/crmsh/test/testcases/confbasic.exp 2014-05-16 13:20:50.000000000 +0200 +++ new/crmsh/test/testcases/confbasic.exp 2014-05-22 19:04:46.000000000 +0200 @@ -59,8 +59,6 @@ .EXT crm_resource --show-metadata ocf:pacemaker:Stateful .EXT crm_resource --show-metadata ocf:heartbeat:Dummy .EXT pengine metadata -WARNING: 50: s5: action monitor not advertised in meta-data, it may not be supported by the RA -WARNING: 50: s6: action monitor not advertised in meta-data, it may not be supported by the RA .EXT crmd metadata .EXT cib metadata .INP: show @@ -136,5 +134,3 @@ record-pending=true tag t1: m5 m6 .INP: commit -WARNING: 52: s5: action monitor not advertised in meta-data, it may not be supported by the RA -WARNING: 52: s6: action monitor not advertised in meta-data, it may not be supported by the RA -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit pymol for openSUSE:Factory
by root＠hilbert.suse.de 23 May '14

23 May '14

Hello community, here is the log from the commit of package pymol for openSUSE:Factory checked in at 2014-05-23 07:28:26 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/pymol (Old) and /work/SRC/openSUSE:Factory/.pymol.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "pymol" Changes: -------- --- /work/SRC/openSUSE:Factory/pymol/pymol.changes 2014-05-02 14:02:10.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.pymol.new/pymol.changes 2014-05-23 07:28:27.000000000 +0200 @@ -1,0 +2,18 @@ +Wed May 14 20:19:36 UTC 2014 - dhall(a)wustl.edu + +- update to svn rev 4076 + * fix label depth issues with label_position + * fix label reappeared when zoomed in too far + * fix "scene auto, update" with wizard message + * fix setting surface_circumscribe + * volume improvments: + - grid_mode support + - adjust volume ramp alphas by number of layers + - support TTT matrix + - bind mouse wheel to volume panel to adjust all alphas at once + * CCP4 map type 0 support + * fixed polymer detection for intra-residue N->C and O3'->P bonds + * raise exception when assigning arbitrary string to int setting + * fix group visibility issue in movie making + +------------------------------------------------------------------- Old: ---- pymol-1.7.1.0.svn4074.tar.bz2 New: ---- pymol-1.7.1.3.svn4076.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ pymol.spec ++++++ --- /var/tmp/diff_new_pack.nFL2Zt/_old 2014-05-23 07:28:28.000000000 +0200 +++ /var/tmp/diff_new_pack.nFL2Zt/_new 2014-05-23 07:28:28.000000000 +0200 @@ -17,7 +17,7 @@ Name: pymol -Version: 1.7.1.0.svn4074 +Version: 1.7.1.3.svn4076 Release: 0 Url: http://pymol.org Summary: A Molecular Viewer ++++++ pymol-1.7.1.0.svn4074.tar.bz2 -> pymol-1.7.1.3.svn4076.tar.bz2 ++++++ /work/SRC/openSUSE:Factory/pymol/pymol-1.7.1.0.svn4074.tar.bz2 /work/SRC/openSUSE:Factory/.pymol.new/pymol-1.7.1.3.svn4076.tar.bz2 differ: char 11, line 1 -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit puppet for openSUSE:Factory
by root＠hilbert.suse.de 23 May '14

23 May '14

Hello community, here is the log from the commit of package puppet for openSUSE:Factory checked in at 2014-05-23 07:28:19 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/puppet (Old) and /work/SRC/openSUSE:Factory/.puppet.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "puppet" Changes: -------- --- /work/SRC/openSUSE:Factory/puppet/puppet.changes 2014-05-02 14:01:53.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.puppet.new/puppet.changes 2014-05-23 07:28:21.000000000 +0200 @@ -1,0 +2,43 @@ +Wed May 21 20:30:00 UTC 2014 - darin(a)darins.net + +- Update to 3.6.0 + Bug Fixes + * [PUP-530] - Installer for Puppet 3 does not check for hiera + * [PUP-748] - PR (2067): Zypper provider install options - darix + * [PUP-1041] - PR (2385) naginator not parsing blank parameters + * [PUP-1114] - Deprecate environment configuration in puppet.conf + * [PUP-1332] - "puppet resource service" fails on Ubuntu + * [PUP-1547] - PR (2311) Undefined method `groups' for nil:NilClass + * [PUP-1552] - V2.0 API reports Not Authorized as a "RUNTIME_ERROR" + * [PUP-1585] - PR (2342) cron resources with target specified generate + duplicate entries + * [PUP-1586] - PR (2331) Cron Type sanity check for the command parameter + is broken + * [PUP-1624] - PR (2342) Cron handles crontab's equality of target + and user strangely + * [PUP-1749] - Puppet module tool does not work on Solaris + * [PUP-1751] - PR (2383): Suse chkconfig --check boot.<service> always + returns 1 whether the service is enabled/disabled. - m4ce + + Improvement + * [PUP-485] - Add assert_type functions for type checks + * [PUP-620] - (PR 2429) Add install_options to gem provider + * [PUP-740] - Validator + * [PUP-1174] - PR (2247) Ability to purge .ssh/authorized_keys + * [PUP-1596] - Make modulepath, manifest, and config_version configurable + per-environment + * [PUP-1699] - Cache environments + * [PUP-1769] - PR (2414) yum provider to support install_options + * [PUP-1799] - New Function API + + For a full list of fixes and improvemtnts see: + https://tickets.puppetlabs.com/secure/ReleaseNote.jspa?projectId=10102&vers… +- removed puppet-3.3.1-systemd-units.patch + +------------------------------------------------------------------- +Wed May 21 19:06:40 UTC 2014 - darin(a)darins.net + +- Set proper ownership permission on /var/{lib,log}/puppet + directories. + +------------------------------------------------------------------- Old: ---- puppet-3.3.1-systemd-units.patch puppet-3.5.1.tar.gz New: ---- puppet-3.6.0.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ puppet.spec ++++++ --- /var/tmp/diff_new_pack.gr2w7X/_old 2014-05-23 07:28:22.000000000 +0200 +++ /var/tmp/diff_new_pack.gr2w7X/_new 2014-05-23 07:28:22.000000000 +0200 @@ -22,7 +22,7 @@ %define _fwdefdir /etc/sysconfig/SuSEfirewall2.d/services Name: puppet -Version: 3.5.1 +Version: 3.6.0 Release: 0 Summary: A network tool for managing many disparate systems License: Apache-2.0 @@ -32,8 +32,6 @@ Source1: puppetmaster.fw Source2: puppet.fw Source7: puppet.changelog -# PATCH-FIX_UPSTREAM puppet-3.3.1-systemd-units.patch https://github.com/puppetlabs/puppet/pull/2510 -Patch1: puppet-3.3.1-systemd-units.patch Obsoletes: hiera-puppet < 1.0.0 Provides: hiera-puppet >= 1.0.0 Requires: facter >= 1.6.0 @@ -77,7 +75,6 @@ %prep %setup -q -%patch1 -p1 cp %{S:7} ChangeLog %build @@ -197,8 +194,8 @@ %{_libdir}/ruby/vendor_ruby/%{rb_ver}/puppetx.rb %{_libdir}/ruby/vendor_ruby/%{rb_ver}/puppetx/ %dir %{_sysconfdir}/puppet -%dir %{_localstatedir}/lib/puppet -%dir %{_localstatedir}/log/puppet +%attr(0750,%{name},%{name}) %dir %{_localstatedir}/lib/puppet +%attr(0750,%{name},%{name}) %dir %{_localstatedir}/log/puppet # emacs-mode files %{_datadir}/emacs/site-lisp/puppet-mode.el # emacs by default does not own it so we must own it... ++++++ puppet-3.5.1.tar.gz -> puppet-3.6.0.tar.gz ++++++ ++++ 30636 lines of diff (skipped) -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit openocd for openSUSE:Factory
by root＠hilbert.suse.de 23 May '14

23 May '14

Hello community, here is the log from the commit of package openocd for openSUSE:Factory checked in at 2014-05-23 07:28:11 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/openocd (Old) and /work/SRC/openSUSE:Factory/.openocd.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "openocd" Changes: -------- --- /work/SRC/openSUSE:Factory/openocd/openocd.changes 2014-05-13 20:46:40.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.openocd.new/openocd.changes 2014-05-23 07:28:13.000000000 +0200 @@ -1,0 +2,9 @@ +Tue May 13 18:11:26 UTC 2014 - ralf(a)rdoering.net + +- Update to openOCD 0.8 instead of git +- Build with external jimtcl only for factory, use included + jimtcl for openSUSE 13.1 and older +- make it build with included jimtcl, so it builds for + openSUSE 12.3 and 13.1 + +------------------------------------------------------------------- Old: ---- openocd-0.7.99+git20140317.tar.bz2 New: ---- openocd-0.8.0.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ openocd.spec ++++++ --- /var/tmp/diff_new_pack.psknax/_old 2014-05-23 07:28:15.000000000 +0200 +++ /var/tmp/diff_new_pack.psknax/_new 2014-05-23 07:28:15.000000000 +0200 @@ -16,9 +16,15 @@ # +%if 0%{?suse_version} < 1320 +%define external_jimtcl 0 +%else +%define external_jimtcl 1 +%endif + %define _udevdir %(pkg-config --variable udevdir udev) Name: openocd -Version: 0.7.99+git20140317 +Version: 0.8.0 Release: 0 Summary: Debugging, in-system programming and boundary-scan testing for embedded devices License: GPL-2.0 @@ -26,11 +32,15 @@ Url: http://openocd.sourceforge.net/ Source0: %{name}-%{version}.tar.bz2 # PATCH-FIX-OPENSUSE fix-jim_cmdproc.patch matwey.kornilov(a)gmail.com -- fix for jimtcl 0.75 +%if %{external_jimtcl} Patch0: fix-jim_cmdproc.patch +%endif BuildRequires: autoconf >= 2.64 BuildRequires: automake BuildRequires: fdupes +%if %{external_jimtcl} BuildRequires: jimtcl-devel +%endif BuildRequires: libftdi1-devel BuildRequires: libhidapi-devel BuildRequires: libtool @@ -64,15 +74,24 @@ %prep %setup -q +%if %{external_jimtcl} %patch0 -p1 +%endif %build -./bootstrap nosubmodule +#./bootstrap nosubmodule +%if !%{external_jimtcl} +# set this explicitely, else the configure from included jimtcl +# won't find a compiler :( +export CC=gcc +%endif %configure \ +%if %{external_jimtcl} + --disable-internal-jimtcl \ +%endif --disable-werror \ --enable-static \ --disable-shared \ - --disable-internal-jimtcl \ --disable-doxygen-html \ --enable-sysfsgpio \ --enable-ioutil \ ++++++ _service ++++++ --- /var/tmp/diff_new_pack.psknax/_old 2014-05-23 07:28:15.000000000 +0200 +++ /var/tmp/diff_new_pack.psknax/_new 2014-05-23 07:28:15.000000000 +0200 @@ -3,7 +3,8 @@ <param name="url">git://git.code.sf.net/p/openocd/code</param> <param name="scm">git</param> <param name="filename">openocd</param> - <param name="versionformat">0.7.99+git%cd</param> + <param name="revision">v0.8.0</param> + <param name="versionformat">0.8.0</param> </service> <service name="recompress" mode="disabled"> <param name="file">*.tar</param> ++++++ openocd-0.7.99+git20140317.tar.bz2 -> openocd-0.8.0.tar.bz2 ++++++ ++++ 159254 lines of diff (skipped) -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0